Search results: h8

Sort order

319 models

P
PrintablesJKM

THRUSTMASTER - TH8S Shifter Add-On

New Thrustmaster TH8S gear lever Variations: TH8Sss1 v1 - no screw needed, just fold and push TH8Sss1 v2 - push, use screw, put part 3 on and then part 2 No supports. Perimeter: 5 Material: PET-G Layer: 0.1mm TH8Sss3 - thread printing,…

Print approx. €2.98–€3.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
600
Likes
12
Rating
0
P

TD-H8 microphone connector cover

A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
3
Rating
5
P
PrintablesNotatiation

Detailed Rally Thrustmaster TH8S Shifter(Under 70g)

RALLY-STYLE SHIFTER FOR THE THRUSTMASTER TH8S Easy to Print Uses under 70g Of Filament Tested on the Thrustmaster TH8S Designed Without the help of AI Multicolor Printer Not Required Print settings are already Included in the .3MF Make…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
8
Rating
0
P
PrintablesThrustmaster

THRUSTMASTER : TH8S Shifter Accessories

Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…

Downloads
1,463
Likes
127
Rating
4.83
P
PrintablesThrustmaster

THRUSTMASTER : TH8A Shifter Accessories

Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 7 perimeters to plates 5 perimeters to the knob 15% Infill For Knobs' better grip texture, we recommend you to use…

Downloads
797
Likes
108
Rating
5
P
PrintablesThrustmaster

THRUSTMASTER : Official TH8S Gear knob files

There are 3 files available on this page : 1/ The DESIGN PIECE is the most important one. You must use it as the base to design your own knob that fits around the piece. 2/ The ADAPTATER is the part needed to mount your knob on the…

Downloads
742
Likes
46
Rating
4.67
P
PrintablesagentSam

Thrustmaster TH8S Shift Knob Adapter

Added a V2 which provides a much better fit on the shaft than my first version. I've also extended the lip as it tore off on the first version.

Downloads
601
Likes
44
Rating
5
P
PrintablesVirtualmisterl

Thrustmaster TH8A gear shifter gear blockers/fillers

I found that when using the thrustmaster th8a shifter on cars with less than 7 gears, i would sometimes accidentally put it in a gear that didn't exist. These gear blocker/fillers eliminate that issue when you are driving a car with 4, 5…

Downloads
592
Likes
75
Rating
5
P
Printablessmoura

Playseat Challenge Shifter with Handbrake Mount TH8A/G29

I use the original jeoje's model but adding the plate for the handbrake, and the holes for the thrustmaster th8a. Assembly Instructions: This was designed to be assembled with 30mm M3 screws with 5.5mm nuts. Print Settings Rafts: No…

Downloads
445
Likes
36
Rating
5
P
PrintablesOlliemon

Samsung Galaxy Watch8 & Watch8 Classic charging stand

A simple print to hold your Galaxy Watch 8 Classic on the included charging puck. This also works with the Galaxy Watch 8 (non-classic) charger - the puck is the same size! Tolerances are tight-ish and set up for my printer, so your…

Downloads
386
Likes
19
Rating
5
P
Printables365lyf

Thrustmaster TH8A to Sparco Gear knob (More Secure Fitment)

The Sparco gear knob is a popular low cost shifter for your Thrustmaster TH8A shifter, but the fitment leaves alot to be desired. This adapter securely mates the TH8A thread to the internal diameter of the Sparco knob with zero flex .…

Downloads
330
Likes
33
Rating
5
P
Printablestheazum

Thrustmaster TH8A Shifterknob

A beautiful shifterknob i remixed Shortened and rethreaded to fit Thrustmaster TH8A Printed in Polyterra black 0.2mm

Downloads
304
Likes
32
Rating
0
P
Printablesbombela

Shure SRH840 headphone headband joint replacement

This is a replacement for the Shure SRH840 headphone joints (left and right) connecting the sliding band to the speakers. Each side is two parts. Connected with a rod. And two little caps to finish it up. That way you can print the caps…

Downloads
302
Likes
10
Rating
5
P
Printablessshman

Thrustmaster TH8A short throw knob

Printing recommendations I've printed a first prototype in PLA, we'll see how long it lasts. Might print an ABS/ASA one and vapor smooth it for better finish. 0.15 LH 0.4mm nozzle No supports required Use high infill (I've used 50%) to…

Downloads
302
Likes
40
Rating
5
P
PrintablesSren232

Thrustmaster TH8A Shift knob

I designed a screw on shift knob for the Thrustmaster TH8A shifter. Just remove the old one and screw on the new printed one with a little presure from above. I used PETG.

Downloads
289
Likes
33
Rating
5
P
PrintablesHarsesis

Playseat Challenge Shifter (TH8A) and Handbrake (Moza HBP) mount

This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…

Downloads
288
Likes
49
Rating
5
P
PrintablesNonSkittles

shift knob for th8s(no adapter needed)

So i modeled a shifter knob for thrustmasters new th8s shifter i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own it just slots into…

Downloads
287
Likes
19
Rating
0
P
Printablesfloano

TH8A shifter Playseat Challenge mount

TH8A shifter Playseat Challenge mount Robust shifter mount for mounting Thrustmaster TH8A to a Playseat Challenge sim racing chair. Printing Rotate the models as shown below. Use supports. Use at least 5 wall loops. Mounting Use six M6…

Downloads
236
Likes
26
Rating
0
P
PrintablesNicholas

Cobra 90 – Thrustmaster TH8S Shifter Knob + Adapter

Give your sim-racing setup a cobra-inspired shifter knob with a flared hood, detailed scales, a segmented belly and sculpted fangs. Cobra 90 has a shortened neck and a widened grip surrounding the mounting socket. The scale detail…

Downloads
227
Likes
63
Rating
5
P
PrintablesJKM

THRUSTMASTER – TH8S Sequential Shifter (+/-)

accessories for sequential ordering attach the bottom plate add pins add rubber bands according to the required strength screw the top part 4x M4 print: material PETG perimeter 4 layer height 0.1mm filling 15% gyroid supports no old model:

Downloads
224
Likes
17
Rating
0
P
PrintablesChris Trotman

Sure SRH840 Replacement Hinge

The plastic hinge broke on my pair of SRH840's, right where they pivot left/right and up/down. Instead of throwing them away, I 3d printed a replacement.

Downloads
218
Likes
4
Rating
5
P
PrintablesBald-har

Playseat Challenge Shifter (TH8A/G29) with handbrake mount

Playseat Challenge mount for a Shifter (TH8A/G29) with handbrake mount

Downloads
214
Likes
19
Rating
5
P
PrintablesDjdogscute

Thrustmaster TH8S shift knob adapter to m12 size

you should print this with supports and the infill density doesnt matter to much but also dont change the scale from what I have for it to fit. This is small and only takes 5 grams of fillament and it works on the Thrustmaster TH8S shifter.

Downloads
208
Likes
13
Rating
0
P
PrintablesHells

Realistic Skull Shifter Knob – Thrustmaster TH8S & Logitech RS H-Shifter

Realistic Skull Shifter Knob – Thrustmaster TH8S A human skull from a real medical CT scan, with the official TH8S threaded insert built in. It screws straight onto the stock adapter, and the face points forward once tightened. Size: 53 ×…

Downloads
178
Likes
59
Rating
5
P

Alex Zahnrad Z42-M1-H8,5-SW8,6

Alex Zahnrad Z42-M1-H8,5-SW8,6 Die Kürzel heißen : 42 Zähne Modul 1 mm Höhe 8,5 mm Schlüssel weite der 6kt. Bohrung 8,6 mm Dies teil habe ich als Ersatzteil für einen Mini-Papier-Schredder für einen netten Kollegen kreiert.

Downloads
176
Likes
6
Rating
5
P
Printablescht47

Thrustmaster TH8A gear shifter - 7th gear blocker

A tiny blocker for the Thrustmaster TH8A shifter. It's a bit longer than other models, to block the path to the 7th gear. In a normal movement to the right, you will hit the print and with a bit pressure you can go into reverse. Print…

Downloads
165
Likes
8
Rating
0
P
PrintablesJohan

Thrustmaster TH8A Table clamp

I made this bracket because i bought one without a bracket and want it lower from the table. 2 M8 nuts and 2 M8 wing bolts are require.

Downloads
163
Likes
26
Rating
0
P
PrintablesAnton

Tidradio TD-H8 wall mount with extra battery storage in the back

Wall mount for Tidradio TD-H8 with extra battery pocket in the back of the radio, since these radios are sold with extra battery anyway, might as well have a place to keep it, next to the radio itself, useful for those old HAMs who don't…

Downloads
156
Likes
14
Rating
5
P
PrintablesMakers Workshop

MJX H8H Crawler Parts

Some parts to improve scale looks of the car and also a bigger battery tray for the front that will be a direct replacement. Scale parts are the bonnet grills and a jerrycan. The 3mf file are correctly scaled as well as the grill .stl…

Downloads
153
Likes
21
Rating
0
P
PrintablesLaceSpades

Shure SRH840 SRH440 Toughened Headband Adjuster Joints Headphones

Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…

Downloads
141
Likes
4
Rating
5
P
PrintablesVoltaicJ

Kessil H80 Shade

A shade for the Kessil H80 LED grow light to prevent light spread. 90mm top to bottom with cutout for cables/ bracket. If you need a different length let me know

Downloads
134
Likes
4
Rating
0
P
PrintablesTribunal

Durable tissue box cover (200x tissue; h80mm)

A durable tissue box cover that prints efficiently. Couldn't find any models of a tissue box cover that would fit our local (EU) size boxes. The ones I could rescale to fit, would result in a waste of printing time and material. Even…

Downloads
134
Likes
22
Rating
0
P
Printables365lyf

Thrustmaster TH8A Gear Lever Protector

If you have installed a short shifter mod, you'll find that there is no protection from scratches on your gear lever stick from hitting the faceplate. Sure you can heatshrink some tubing, but that will only last you a week before you'll…

Downloads
132
Likes
17
Rating
0
P
PrintablesAdamox716

THRUSTMASTER TH8S SHORTSHIFTER MOD

NOZZLE TEMP: 230 BED TEMP: 70 BED PLATE: PEI LAYER HEIGHT: 0.2 AMOUNT OF RAFT LAYERS: 3 MAX PRINT SPEED: 150 MM/S FIRST LAYER SPEED: 50 MM/S ACCELERATION: 2500 MM/S2 MATERIAL: PLA INFILL: 25% COOLING FIRST LAYER: OFF COOLING OTHER LAYERS:…

Downloads
130
Likes
10
Rating
0
P
PrintablesViktor

REMIX Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount

Remixed Harsesis Playseat Challange Shifter (TH8A) and Handbrake (Moza HBP) mount according to his recommendations which was to move the hand brake a bit further to the front and the shifter a bit to the outside (right). Also added slots…

Downloads
129
Likes
26
Rating
0
P
PrintablesUrbanpirate

Thrustmaster TH8S screw clamp replacement

Made a replacement for the TH8S shifter screw clamp. Included a .step file of the project in case anybody wants to tinker with the design.

Downloads
126
Likes
12
Rating
5
P
PrintablesVHF

TH8A H-shifter mod M6 with pads

With printed 3.5mm pads Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 50 Filament: CCTREE PLA Category: Hobby

Downloads
126
Likes
13
Rating
5
P
PrintablesRod Danesh

Wasteland Piston Skull – Shifter Knob for Thrustmaster TH8S

Every wasteland war machine needs a gear knob forged from its own engine. This knob turns a classic engine piston into a snarling skull: three ring grooves on the crown, the wrist-pin bore through the side, and a skull face carved into…

Downloads
124
Likes
38
Rating
0
P
PrintablesCaballero229

Parts for MJX H8H

The Boards you need are from daver18qc, you need them scale up to a lenght of 160mm. https://www.printables.com/model/9497-110-scale-maxtrax-mkii-traction-board the holder for the spare tire is with 12,5mm offset to the right side

Downloads
116
Likes
5
Rating
0
P
PrintablesSteve

TH8S extended G7 Block + R lock

Extension of G7 Block to help shift to 6th and lockout Reverse. STL has some extra bevels from photo to make in install easier.

Downloads
114
Likes
8
Rating
5
P
PrintablesGrubbyZebra

ETS2/ATS Custom Shift Plates for Thrustmaster TH8A

My collection of custom shift pattern plates for the Thrustmaster TH8A Shifter for use with ETS2 and ATS. The following gearboxes are covered: Scania 12 and 12+2 Volvo 12 and 12+2 ZF-12 and ZF-16 Eaton Fuller 10, 13, and 16 There is also…

Downloads
112
Likes
6
Rating
4
P
PrintablesGEAR

I H8 PHONE HOLDERS

You might be asking “ WHY ” It is a simple concept to design so there are too many of them on the internet. There are so many different types of it for various needs. So, you cannot make one to use everywhere. Most of the useful designs…

Downloads
109
Likes
7
Rating
4
P
PrintablesBombastic3D

Thrustmaster TH8A Clamp

I bought my shifter used.. with no clamp, sounds like a project for the 3D printer. The clamp turned out pretty tough, seems with withstand the abuse. Only time will tell. Brief Instructions: -To reinforce and add to the longevity, i left…

Downloads
109
Likes
10
Rating
5

Mercursys H70X H80X Holder wall-mounted

Wall Mount for Mercusys H70X / H80X This wall mount is specifically designed for the Mercusys H70X and H80X devices. It allows for easy and secure wall installation, saving space and ensuring optimal placement for better signal…

Downloads
107
Likes
3
Rating
5
P
Printablessshman

Thrustmaster TH8A/TH8S short throw knob (colorful remix)

I've done a couple of changes since the original model: Made it a bit shorter (doesn't affect the overall length as the thread is in the same place). Split the model into 3 to print the middle part in a different color.

Downloads
104
Likes
20
Rating
0
P
PrintablesSteve

Thrustmaster Clip in TH8S Short Shift

Model includes some clips on 3-4 throw to hold in place. Simply take gear knob off to install. With the existing throw mechanism the throw can't be made much shorter otherwise it may bounce out of gear. With the slightly shorter gear…

Downloads
103
Likes
8
Rating
0
P
PrintablesAkira

Thrustmaster TH8a Shifter Mount

A shifter mount i made to side mount onto a piece of 8040 so that i could have both my sequential shifter from moza and my thrustmaster th8a (with trucking shift knob) at the same range from my seating position. Uses 4xM8 bolts (with…

Downloads
103
Likes
17
Rating
0
P

Schrittmotor Kurbel mit Zahnrad D6-SW3-H8-Mod1-Z15

Schrittmotor Kurbel mit Zahnrad D6-SW3-H8-Mod1-Z15 und Schrittmotor Kurbel mit Zahnrad D5-SW3-H8-Mod1-Z15

Downloads
96
Likes
3
Rating
0
P
Printableslclab

Ventilated THRUSTMASTER TH8S Shifter Knob (S, M & L)

An ergonomic, ventilated knob for the THRUSTMASTER® TH8S shifter in the sizes small, medium (recommended) and large. Check also my DRIFT Knob for the THRUSTMASTER® TH8S Shifter . Please don't scale the parts: The thread and the fits are…

Downloads
95
Likes
66
Rating
5
P
PrintablesType Z Designs

Sport Shift Knob for Thrustmaster TH8A

I designed this to try to match the feel of my GT86. I printed mine with 80% infill for the extra weight.

Downloads
94
Likes
13
Rating
5
P
PrintablesNonSkittles

Mini Shiftknob for TH8S

A mini shift knob for thrustmaster th8s its print in place model that doesent need any screws or anything, just pop off the printer and use it fits snugly on the saft, so just push it on and play no supports i used brim, no need to use it…

Downloads
89
Likes
5
Rating
5
P
PrintablesBAH

Govee H705 / H805 Series Permanent Outdoor Lights Mounting Brackets

Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke

Downloads
88
Likes
11
Rating
0
P
PrintablesCharlie Topper

Thrustmaster TH8A Handbrake Plate

No other tools required. I printed it with the sturdy profile, arachne, and a 0.6mm nozzle on a P1S.

Downloads
84
Likes
16
Rating
0
P
PrintablesMáté Kancsal

Euro Shift Icons Thrustmaster TH8S Shifter Knobs

I modelled the shift knobs of the best european cars so you don't have to! I hope it will make your sim racing journey more immersive.😊 The bundle contains 12 shift knobs some of them needs glue to assemble. Pictures of printed examples…

Downloads
82
Likes
34
Rating
0
P
PrintablesLukas Klein

Gear Shifter Knob for Thrustmaster TH8A

The hole is 8.5mm so you can take a M9 thread cutter to make it fit on the original shifter pole.

Downloads
81
Likes
10
Rating
4
P
Printablesmarkusdruckt

FreeCAD Files for THRUSTMASTER TH8S Gear knob (+STL)

FreeCAD file for official THRUSTMASTER TH8S gear knob files. Change "MainBody" object to your desire and/or add custom extensions.

Downloads
79
Likes
18
Rating
0
P
PrintablesIberGoku

Botao de Câmbio Personalizado PRUSA Thrustmaster TH8S Shifter

Botao de Câmbio Personalizado PRUSA Thrustmaster TH8S Shifter

Downloads
78
Likes
79
Rating
0
P
PrintablesNonSkittles

th8s adapter short

just made it little shorter for more clearens nothing else here a link to original: https://www.printables.com/model/602578-thrustmaster-th8s-shift-knob-adapter

Downloads
77
Likes
13
Rating
0
P
Printables3Diocrity

Refrigerator Drawer Divider for LG Fridge Beverage Drawer (LF30H8210S etc)

Refrigerator Drawer Divider for LG Fridge Beverage Drawer Since the LG fridge only ships with one divider for the beverage drawer, the draw fits four, and they won't sell you any more, Davoxt saved the day with his model! (go show him…

Downloads
76
Likes
21
Rating
0
P
PrintablesDonKeulito

MagSafe iPhone Monitor Mount for Samsung C34H890WGU - CH89 Series

A customized MagSafe iPhone mount for Samsung C34H890WGU - CH89 Series, made by a 3D scan and stoneburner's OpenSCAD design. P.S.: It seems there was an export issue with scaling. Cura scaling to 10000% works. For other slicers scale to…

Downloads
76
Likes
14
Rating
0
P

Ecken-Schutz D40 H8 V1

Ecken-Schutz D40H8 Zum aufkleben z.B. auf die Ecken einer Glasplatte eines Tisches.

Downloads
76
Likes
4
Rating
0
P
Printablesappallingdonut7

Sigma 50mm Art f/1.4 Lens Hood - LH830-02

Lens hood LH830-02 for the original Sigma 50mm f/1.4 Art lens

Downloads
71
Likes
8
Rating
0
P
Printablesbenhoad

Weighted Knurled Knob Shifter - TH8S - Updated v1.1

Overview A simple Knurled Knob that can be optionally weight with a medium of your choosing. Designed for the Thrustmaster Custom Shifter Knob contest - hit that like and follow to help me out. Printed Parts Knurled Knob Comes in either a…

Downloads
67
Likes
40
Rating
0
P
PrintablesBlackBird

Thrustmaster th8a 6-gear-mod

A mod to reduce the shifter to a 6-gear version. No more accidentally slide into the 7th gear while shifting into 5th.

Downloads
67
Likes
20
Rating
0
P
PrintablesLgkoki

Scania Shift Knob Truck Adapter Thrustmaster TH8A

The intermediate apparatus I designed to attach the Scania gear shift knob.

Downloads
63
Likes
10
Rating
0
P
PrintablesDubbs

Thrustmaster TH8A Shifter Mod

TH8A Shifter Mod Block to make the shifting feel more tactile.

Downloads
63
Likes
5
Rating
0
P
PrintablesRyan

Tidradio H8 :: Holder with Pi Attachment

This is a holder for a Tidradio h8 and a raspberry pi 3b. This was created to hook up with an AIOC. This was created to put everything together for easy movability. This was printed in PLA with no issues. @Anton assisted with this…

Downloads
62
Likes
17
Rating
0
P
PrintablesTorusKnot

AEROLITH Ergonomic THRUSTMASTER TH8S Shifter Knob

AEROLITH — Custom Shifter Knob for Thrustmaster® TH8S Sculpted for control. Designed for the drive. Give your sim-racing setup a distinctive upgrade with AEROLITH , a custom 3D-printable shifter knob designed for the Thrustmaster® TH8S.…

Downloads
60
Likes
17
Rating
0
P
PrintablesPalecek

HURST pistol-grip Thrustmaster TH8S shifter knob

Shift knob with an iconic design inspired by a pistol grip. Surprisingly comfortable and provides a great grip when changing gears. If you race muscle cars in games, it’s basically required by law that you use a pistol-grip shifter. There…

Downloads
58
Likes
18
Rating
0
P
PrintablesTonnda_KM

TH8A Shift ATS/ETS2

Scania 12+2 , Volvo 12+2 , Eaton 18 , ZF 16 pro řadící páku TH8A

Downloads
56
Likes
11
Rating
5
P
PrintablesMakerOne

TH8S Hot-Swappable Shifter Knobs

TH8S Hot-Swappable Shifter Knobs – 4 Designs in One System Customize your Thrustmaster TH8S shifter with this hot-swappable knob system! Choose between four different knob designs and easily switch between them depending on your driving…

Downloads
56
Likes
48
Rating
5
P
PrintablesMatt Hardy

Hannya Mask MH801

Hannya mask sculpted in Zbrush

Downloads
54
Likes
9
Rating
5
P
PrintablesChris

Remix - Playseat Challenge Shifter Mount - Surface - TH8A part

Remix of just the surface part from https://www.thingiverse.com/thing:3569302 to provide the bolt holes for the TH8A. There are several other TH8A remixes out there - but they also tend to merge the surface and outer bracket. I am…

Downloads
54
Likes
3
Rating
0
P
PrintablesMatt Hardy

Horned Hannya MH801

A horned hannya designed in ZBrush

Downloads
53
Likes
5
Rating
0
P
PrintablesPerun

Annis Elegy RH8 - Hotwheels model

A Hotwheels model of the Annis Elegy RH8 from GTA V based on the Nissan GTR. To get the model to Hotwheels scale, resize it to 69.17% in your slicer. For wheels, use any standard 11mm Hotwheels wheels. To install the them, either drill a…

Downloads
51
Likes
11
Rating
0
P
Printablesl3anks

HSW Unifi Switch8 Wall Mount

Used to attach a unifi us8 to HSW. Needed to print with 100% infill or the honeycomb pegs would snap off easily

Downloads
49
Likes
7
Rating
2
P
PrintablesMaximotep

classic JDM/Rally style Shift knob for Thrustmaster TH8S

This is an adapted version of the shift knob I originally designed for my personal sim racing setup. I’ve redesigned it to be compatible with the Thrustmaster TH8S , using the official adapter, while keeping the classic…

Downloads
46
Likes
36
Rating
5
P
PrintablesEconca

Sony Bravia XH81 under-screen soundbar mount for Lenco SB-080

This is a pair of support brackets that allow to mount a Lenco SB-080 soundbar just below the screen of a Sony Bravia KD-43XH81. The brackets mount to the TV where the stands would usually be, so obviously you will need to wall-mount your…

Downloads
46
Likes
2
Rating
0
P
PrintablesFederico9292

LMH8UU Oval-Flanged 8mm Bushing

Print at whatever resolution you like scale up to your needings (I found 102% scale fits well my 8mm rods) bushing first of his type, here in thingiverse : found the mockup of this exact bushing but without any groove on the inside. I…

Downloads
44
Likes
3
Rating
0
P
PrintablesDevelopedTea57

Epomaker TH80 Wrist Rest

Same bottom profile, and requires rubber feet.

Downloads
44
Likes
4
Rating
0
P
PrintablesTema 305

CobraShift – Snake-Inspired TH8S Shifter Knob

Turn your sim racing setup into something extraordinary with CobraShift, a custom shifter knob inspired by the iconic shape of a cobra. Its sculpted snake head and flowing, curved body create an aggressive, organic design that makes every…

Downloads
42
Likes
11
Rating
0
P
PrintablesspectrexFPV

EPOMAKER TH80/66 Totoro Volume Dial

EPOMAKER TH80/66 Pro Volume Dial with Totoro from "My Neighbour Totoro" Features: The Totoro figure was designed by Patrick @Patrickart on Thingiverse Permission to remix was obtained from Patrick!! Print Settings Printer: Creality Ender…

Downloads
41
Likes
2
Rating
0
P
Printables/ MIĶĶIS

The smallest th8a shift knob

Thread pitch - 1.25 Thread diameter - 10mm Compatible with Logitech G25, G27, G29, G920 and Thrustmaster TH8 Print PETG with 15% infill ASA - not tested PLA - not tested

Downloads
40
Likes
4
Rating
4.5
P
PrintablesProbablyDead

Thrustmaster TH8S Sequential Plate

Reversed Shift Up/Down version provided I quickly painted the letters with a Sharpie pen for the photo, but I recommend a white pen/whiteout for better visibility (or use multiple filaments) Assetto Related - Uncheck H-Pattern mode in CM,…

Downloads
37
Likes
8
Rating
0
P
PrintablesAntonín Marek

TH8S ball shifter

I made a ball shape knob that is directly mountable on TH8S and fits well in average hand. Updated for knob contest.

Downloads
36
Likes
2
Rating
0
P
PrintablesdarKing

TH8A Shifter Mod TPU / Flex Edition

This is a slightly altered version, intended to be printed with TPU (flex) as I don't like the idea that the metal shaft is simply rubbing against rigid plastic. I'd describe the feeling as “dampened”. It's still notchy and tactile but…

Downloads
35
Likes
4
Rating
0

Thrustmaster TH8S Skull Mod

Skull Racing for Thrustmaster TH8S Shifte

Downloads
35
Likes
7
Rating
0
P
Printableslclab

Ventilated THRUSTMASTER TH8S Shifter Knob (V2)

Another take on the THRUSTMASTER® TH8S shifter knob - this time less conventional but with all the pros of my first version, the ERGO Knob . Please don’t scale the parts: The thread and the fits are sized for the THRUSTMASTER® adapter.…

Downloads
34
Likes
26
Rating
5
P
PrintablesHighcooley

Case for Fish8840 TransistorTester with exposed SMD Pads

CraVeg's Case for the Fish8840 or other RipOff Component Testers but with exposed SMD testpads Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 Infill: 40% Category: Electronics

Downloads
34
Likes
2
Rating
0
P
PrintablesMatt Hardy

Decorated Hannya MH801

Hannya designed in Zbrush

Downloads
33
Likes
5
Rating
0
P
PrintablesMrFox

ERSA RH80 Metall Schwamm Halterung

Die Vorrichtung für denn Schwamm hat ein Lochdurchmesser von 40mm. Halterung ist auch nicht im Weg wenn man denn Lötkolben Benutzen möchte. Die Box wurde sehr pass genau Gebaut, wenn es bei ihnen nicht direkt rein passt einfach etwas…

Downloads
33
Likes
6
Rating
5

MH800 / AFM8 Positioner Organiser

I was sick of my positioners being a jumbled mess when i took this tray down from my tool board, i designed this to fimly hold all my positioners tight enought that you can shake the container upside down and they will still be retained.…

Downloads
33
Likes
2
Rating
0
P
Printablesokuyuki

Mad Max: Fury Road – Shift Knob Knife for Thrustmaster TH8S

Mad Max: Fury Road – Shift Knob Knife (TH8S Custom) Bring the post-apocalyptic world of Mad Max: Fury Road to your racing simulator! This custom 3D-printable shift knob is inspired by the iconic bone-shaped knife design from the movie.…

Downloads
32
Likes
36
Rating
0
P
PrintablesPtoughneigh

Pickle Rick Shifter Knob for Thrustmaster TH8S

Pickle Rick Shifter Knob for Thrustmaster TH8S First he turned himself into a pickle, funniest shit you've ever seen, now watch him get transformed into a custom shifter knob! Designed specifically as a drop-in replacement for the…

Downloads
31
Likes
15
Rating
0
P
Printablesalexschw

Thrustmaster TH8S Offical modification logo removal

Removes the "TM" ("Thrustmaster") on top of the knob to help with my printers limitations. No other edits, only the top circular knob part included.

Downloads
31
Likes
3
Rating
5
P
PrintablesLewgit

Hoonigan Shifter TH8s Knob

Ever wanting to try drift up daring heights just like Ken Block. Well then, print the ALL NEW Hoonigan Shifter Knob designed to fit the TH8s Racing Wheel Shifter. Split in two peices to put together when you want to go drifting, racing,…

Downloads
30
Likes
18
Rating
0

Helix Cage – Organic Lattice Shift Knob for Thrustmaster TH8S

An open, organic lattice cage wrapped around a twisted helical core, so the core seems to spin through the windows from every angle. It has four printed parts, needs no supports, and gives a two-colour look on a single-colour printer.…

Downloads
30
Likes
30
Rating
0
P
PrintablesOldManGrimm

VESA Adapter for Samsung LU32H850

A normal monitor arm might not fit into the bay of a Samsung LU32H850. This adapter moves the connection point outwards that you can use oversided VESA plates. Additional required material 4x M4x20 instead of the standard VESA srews

Downloads
30
Likes
5
Rating
0
P
PrintablesAkshath

Essential — Minimalist Shifter Knob for TH8S

Sometimes, less is more. I wanted to create a shifter knob that doesn't try to turn the TH8S into something completely different. Instead, the goal was to give it the look and feel of a clean, classic manual transmission shifter while…

Downloads
29
Likes
13
Rating
0