HAILO logo
The logo in case you carry out a repair like a waste / garbage can from Hailo. A front plate for repair you find under: https://www.printables.com/model/968902-waste-garbage-can-hailo-repair
- Downloads
- 6
- Likes
- 1
- Rating
- 5
Counting matching models…
The logo in case you carry out a repair like a waste / garbage can from Hailo. A front plate for repair you find under: https://www.printables.com/model/968902-waste-garbage-can-hailo-repair
This Ebike Battery holder only works for batteries with the 3-Notch design. Print Settings: Nozzle: 0.4mm Layer Height: 0.2mm Walls: 3 Infill Pattern: Gyroid Support: Enabled For better results reduce the layer height to 0.12mm.
If you print this feet please print in the downloaded orientation and use support. Its made for a Hailo 8500 ladder. I don´t know if it fits to an other ladder. Feel free to try out. Print Settings Printer Brand: Prusa Printer: i3 MK3…
This is my re-design of the Hailo Waste Bin Lid Part Nr.: 1068589 I broke my old one and the replacement part was unbelievably expensive (a few years back... now, not anymore) Print with "supports on builtplate only" ! Pint in the picture…
Updated version, better fit and added screw mount. I am not sure which batteries fit, se pictures.
Hello, here is the Support Tube holder for Hailong Akku https://www.aliexpress.com/item/1005001315092775.html?spm=a2g0 Works with all bike down tube of constant 50mm mounted with cable ties printed with Caribou 220 Mk3S ( modded Prusa i3…
Wandhalter für meinen Pedelec Akku von Hailong (HAILONG-MAX 48V 20AH). Die Gehäuse der Akkus werden gerne mal vom Hersteller verändert, also bitte vor dem Druck prüfen ob es überhaupt für eure Variante passt. Für etwaige Anpassungen habe…
hailo ladder feed with Anti-slip mats or for the original Printing instructions: feed • Material: PETG • Nozzle: 0.4 mm • Layer Height: 0.2 mm • Infill: 20% • Supports: no • Brim/Raft: no • Wall: 3 anti-slip mats • Material: TPU • Nozzle:…
46mm diameter tube mount. To adjust diameter use OpenSCAD file provided.
Die Füsse passen auf das Modell HAILO-Trittstufenleitern der Serie ComfortLine und baugleichen Leitern. Die Füsse haben die Abmessungen: vorne 35x20mm und hinten 43x20mm. Gedruckt habe ich die Teile mit diesem Filament - halten…
This hook mounts a Hailo Standing Step Ladder to a wall. I've designed it to hold the plastic top part of my Hailo L60 (PN: 8160-507) ladder - but probably will also fit others with a similar plastic part. The part is massive and holds…
Raspberry pi 5 case with Hailo 8 TPU HAT module I designed this case to be compact while generating airflow through a fan directly to the TPU to allow intensive use as a server working 24/7. I also added support for an SSD hard drive. For…
I made this to attach the battery of my Hailong/Bafang motor on my 48mm diameter frame tube. I drilled 5mm holes in the aluminum tube and used rivets to keep it in place. Use 4mm zipties to wrap the plastic piece for extra stability.
I needed a mount for my hailong 36v 5 pin battery so I found an existing wall mount for a similar battery and modified it to fit my battery and added a part to allow a spare connector to side in it.
A simple cap to cover the battery connectors and stop getting them rained on. It's a quick design, with a little bit of play to make it easy to remove. Could be improved greatly. Feel free to do so. This is good enough for me.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Quick solution for Hailo ladders. I made two versions which…
you may adjust the thickness of the part, which stuck in the profile. Use ABS ore petg Print instructions Category: Replacement Parts
Print in ABS or PETG, PLA might be to brittle for the Latch. Otherwise PLA will work fine when the Bin is inserted by hand.
Printed in PETG with organic supports.
This is a replacement clamp for the spring mechanism of Hailo dustbins. Release: 20200222 Print instructions can be simply print in PLA
this cap to replace broken/lot caps of an ironing board. cross section/dimension of metal frame is 20x30 (more exact 19,5x29,5mm²) i suggest any type of contact glue if it's not a snug fit.
This is a replacement bracket for use in the Hailo waste bin system. It has Hailo part no. 1130509 and is used to carry the 2.5 litre inner bin with part no. 1102429. I printed it in eSUN PLA+ on an Ender 3 S1 Pro using Cura 5.0 as…
Replacement feets for Hailo ladders (like Modell 8900): inner size of Aluminium profile on large side: 40 x 17 mm outer size of profile on large side: 43 x 20 mm inner size of Aluminium profile small side: 32 x 17 mm outer size of profile…
In our kitchen, with the built-in trash can, with pedal, the spring broke. And unfortunately, this does not exist as a spare part.😢 So, removed, measured, Fusion360 started and constructed a little... and the Artillery Sidewinder X1 😍has…
Replacement handle strip for a HAILO pull-out waste bin. Part number: 1091389 (cream white), 1059429 (graphite gray). Available for purchase at HAILO: https://www.hailo.de/de/shop/p/griffleiste-1125319 The model lies flat (horizontally)…
I created this simple foot for a 36x18x18 terrarium. Stays in place with a press fit. Simple and removable. Link to the terrarium: https://a.co/d/7faTcwD
This is an easy to print replacement lid for the inner garbage bin of Hailo Rondo et al. . It replaces the original lid partnumber 1068589 . It just fit's on an Ender 3 build plate. Print with supports. Print Settings Printer Brand:…
As the Hailo trashbin didn't offer Lids, i created one by myself. This is useful, for instance if you store organic waste in your trashbin. It is compatible with those 7 Liter compartements: Articlenumbers: 1082479 and 1068909 Those bins…
als Ergänzung für die Gummi Auflage des Akkus
Hailong ebike battery mount with multiconnect slot on the back.
This is a foot for the ladder type Hailo Selecta. The ladder it matches is from about the year 2000. The foot is slightly oval. Measurements: 40mm x 24mm At the side the width is around 18mm-19mm. Printed in TPU 95. I used 5 bottom and 5…
Got an aquarium stand to put this enclosure on, wanted to make it couldn't fall.
EN: After the front panel of the built-in waste system was broken, I glued a panel in the same design over it. The logo was added for a better optical effect. You will find this Logo under:…
Corner Protection for Ladder Steps Our ladder has ruined too many trousers after the original plastic edge protectors became brittle and disintegrated. The replacement parts I originally bought didn’t fit properly and were quite…
A two-part case for the Raspberry Pi 5 with the official Active Cooler and the Raspberry Pi AI HAT+ (Hailo-8, 26 TOPS) mounted on top. It works on its own as a desk enclosure, or you can click it into the included stand / cradle to keep…
New pedal for rubbish bin Hailo Öko Duo. Old was already broken. There are two parts. Top and bottom. Bottom part is optional, but it can prevent from breaking. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No…
Its not a perfect visual replacement, just a functional one.
Wall protector for a Hailo aluminum ladder to prevent annoying streaks on the wall.
les serrures hailo cassant sans arret je l'ai ai refabriqué en impression 3D, à imprimer à 45degré pour que les couches soit dans le bon sens, testé en ASA et ABS qualité top.
My partner has an epoxy resin home business, but the fumes from the art are unpleasant and unhealthy. However, the weather here is rarely good enough to do the craft outdoors. As such, I went looking for fume-hoods for our hobby room for…
end cap for the hailo NormStep 8655 and 8643 ladders
Hailong ebike Battery Voltmeter Holder If you need to know the voltage of your ebike battery even when the battery is not plugged in your bike and you don’t want to use a multimeter every time to check, this is maybe for you. Because I…
Jeder kennt das Problem. Die Leiter steht irgendwie immer im Weg und manchmal auch zwei. Ich habe hier einen Wandhalter konstruiert der die beliebte HAILO Haushaltsleiter und eine kleinere, auch übliche Trittleiter gleichzeitig aufnehmen…
Einer meiner ersten Versuche ... / One of my first tries ... Bei unserem alten Hailo-Dreifach Mülleimer brach die Brücke auf einer Seite, in welchen der mittlere Eimer eingehängt ist. Habe die Brücke entfernt, so dass an jeder Seite noch…
A simple cap to cover the battery connectors and stop getting them rained on. It's a quick design, with a little bit of play to make it easy to remove. Could be improved greatly. Feel free to do so. This is good enough for me.
I made this to attach the battery of my Hailong/Bafang motor on my 48mm diameter frame tube. I drilled 5mm holes in the aluminum tube and used rivets to keep it in place. Use 4mm zipties to wrap the plastic piece for extra stability.
les serrures hailo cassant sans arret je l'ai ai refabriqué en impression 3D, à imprimer à 45degré pour que les couches soit dans le bon sens, testé en ASA et ABS qualité top.
This is a foot for the ladder type Hailo Selecta. The ladder it matches is from about the year 2000. The foot is slightly oval. Measurements: 40mm x 24mm At the side the width is around 18mm-19mm. Printed in TPU 95. I used 5 bottom and 5…
Replacement feets for Hailo ladders (like Modell 8900): inner size of Aluminium profile on large side: 40 x 17 mm outer size of profile on large side: 43 x 20 mm inner size of Aluminium profile small side: 32 x 17 mm outer size of profile…
Jeder kennt das Problem. Die Leiter steht irgendwie immer im Weg und manchmal auch zwei. Ich habe hier einen Wandhalter konstruiert der die beliebte HAILO Haushaltsleiter und eine kleinere, auch übliche Trittleiter gleichzeitig aufnehmen…