105 models
Background My father often says, “Begreifen kommt von greifen.” This is a German wordplay that’s quite hard to translate directly into English. "Begreifen" means "to understand," while "greifen" means "to grasp" something physically with…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Big thanks go to Anton Granata for his awesome design!! This is a haptic version of a Rubik's Cube to play without having to look at the colors. The idea this design is based on is to enable people that are blind or visually impaired play…
Remixed this awesome fidget slider by @NeonGrave_146425 so it is compatible with 6x3mm magnets and no longer requires the usage of any glue, the pieces press fit together. Positioned the magnets in a way that the first layers are sturdier…
A simple adapter to fit the Simagic HPR to Moza SR-P and possibly SR-P Lite pedals. Mounts to the back of the pedal and holds the HPR to the back. Requires 4x M4x15 countersunk screws to hold the HPR to the adapter, and 4x M4x10…
Designed to mount this type of bass shakers to your moza crp2 pedals. Comes in 2 parts so it can be printed with no supports. Assembly instructions: Unscrew the aluminum plate from the bass shaker. Glue the plate in the middle of the…
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
VRS Pro Pedals - P-HPR Mount A sturdy mount using the existing top barrel nut on the VRS pedals. I've included a .3mf project with 100% infill between 4-17.8mm for extra strength. Printed all at once. Pictured printed in Eryone PETG-CF. I…
Be aware it's a very snug fit.
I have designed these parts to provide a mounting solution for the SIMAGIC P-HPR to the Fanatec ClubSport Pedals V3. There are two types of bracket, one which utilizes the SIMAGIC P2000 Haptic Module Bracket (included in a kit with some…
Description Sim racing is cool, but gear is expensive. That's why I try to get the most out of the most affordable stuff and build up my rig this way. Simagic has a relatively open ecosystem and provides the P-HPR force-feedback…
Printed round face down with no supports. Throttle mount fits clutch as well. Updated with groove for power wire.
WARNING - You need to determine if your printed mount is strong enough based on your setup and equipment. You should not only check that the mount is sturdy enough by your own standards, but you should also check the clearance of the…
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
Haptic slider remixed for 6x3 magnets
It reuses 4 of the m3 screws on the standoffs. They screw directly in the hole in the bottom of the box. Doesn't need supports if your printer is good with bridges. Maybe little supports for the conterbored holes on the cover. Need 2x…
I didn't have anymore 5x3 magnets that the original was designed for, so I fired up Shapr3d and made this version to fit the 8x3 magnets I had sitting around. I made it from scratch instead of just modifying the STL itself. Inserts…
A simple adapter to fit the Simagic P-HPR Neo to Moza SR-P. Mounts to the back of the pedal and holds the P-HPR Neo to the back. Requires 2 x M4x20 countersunk screws to hold the HPR to the adapter, and 4x M4x10 wafer-head low profile…
Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…
For allAsetek pedals (la prima/forte/invicta) and with the original bolts between the pedal plate and tapped holes.
Das Alphabet (The Alphabet) Update 2026/03/11: Added small letters as @Cryptomon_4223491 asked for. Files for Bambu Studio and Prusa Slicer are included as well. My daughter lost some of her beloved wooden alphabet learning cards and I…
I made these from scratch for the Simsonn Pro X Ultra pedals, the other designs on this site and others didn't match the distance between the mounting bolts (67,5mm). The motors mount with M4 bolts in a 19 by 28mm pattern, the throttle is…
I couldn't find any adapter that works for the break pedal also, so I created my own version. This has cleareance for all pedals including break. You need 4x M4 x 35 screws and 4x M4 nuts. Printed with PLA works fine. Added also the…
Originaly published on https://makerworld.com/en/@bambooster Check my Makerworld profile for more MAGNISLIDE faces MAGNISLIDE is a must-have accessory for anyone who doesn't know what to do with their hands and can never stay still!…
The slider with the 5x2mm magnets was too weak for me so I remixed the base to use two magnets stacked to be stronger.
Mount for a Haptic Transducer on the accelerator pedal for SIMSONN Pro pedals
Small tabletop model demonstrating the concept of a differential gear train
Simagic controller box for haptic mount V2 A lot of updates from the remixed version: - Strengthened top latch by 1mm - Fits M8 and M6 T-nuts - Side grooves for Zip Tie mount - 0.5meter less filament 2 versions; - 40 aluminium profile…
Haptic Pad A 6 button macropad with a display for button labels and a mouse knob with haptic feedback! Project Video Link Features 6 Programmable Macro Buttons 128x64 OLED display for button labels and Icons Support for up to 256 profiles…
I have tried many fidget toys (made by myself or downloaded) and this is easily the best one yet. This model is my own creation, but it's heavily inspired by a model made by @tzachmost_296167 ( Spinfinity ), be sure to check his model…
Bracket to mount Simagic haptic motors onto VNM V1 pedals. Prints without supports Category: Video Games
A set of brackets to mount the Simagic P-HPR Haptic Pedal Reactor on the original Moza CRP pedals. Which only need M4 Nuts & Flat Head Countersunk Screws The brackets are designed to hold the haptics as close to the pedal as possible,…
Triple the gears, triple the satisfaction! ⚙⚙⚙ The Triple-Gear Haptic Fidget takes desk toys to a whole new mechanical level. Featuring three interconnected gears, it mimics a mechanical chain reaction – spin one end and watch the motion…
I designed in Fusion 360, use at your own risk (hurts a lot) Use tree support or normal support for the overhangs
While many sliding fidgets that you see around lately show their mechanical seams clearly, this model was engineered to hide them. At rest, it appears to be a solid, textured cylinder covered in organic scales. Try pick it up and the 8…
I modeled this after seeing similar things made of brass. Being too cheap to actually buy one I threw together this during a lunch break. Overall dimensions are 50mm x 25mm x 10mm. The wholes fit 8mm magnets, 12 in total. My first print…
Need a satisfying fidget that you can print without any assembly? 🛠 This Dual-Gear Haptic Clicker is designed for maximum tactile feedback and a surprisingly pleasant mechanical sound! Perfect for desk-bound work or on-the-go stress…
Model is basically an enlarged version of the provided bracket, which fits the holes of the plastic pedal. Use screws that came with the P-HPR, and I think it's a m4 nut on the other side.
An easy way to mount Simagic haptics to your Fanatec V3 pedals
The Simagic Haptic Pedal Reactor mounting bracket is compatible with all pedal sets from the Girro Sim company
Hardware needed - 2x M6x10 countersunk screws
Material: PLA-Pro Printing settings: Perimeters: 5 Infill: 25% Layer height: 0.2mm Supports: yes
INTRODUCTION This device combines tactile feedback and braille text to create a multi-sensory experience that promotes learning and understanding of different shapes. Whether used in educational settings, rehabilitation centers, or…
Replacement case for the Simagic P2000 Haptic Control board. Blocks the extremely bright LEDs to avoid lighting up your room. Newer "p2000box_2" tops have increased tolerances for the USB connector based on comments. Closed version is…
Simagic Haptic Reactor (HPR) holder for Sparco sport seat for belt holes. You need: 4x M3x5x4 Heat inserts 4 M3x12mm bolts I put adhesive foam in between Sparco's stock plastic hole cover and the seat in the outer part for eliminate…
I wanted to hide the bright green LED and I needed a way to mount the controller to my rig, so I came up with this box. You'll need to flip the lid when you print it, so the side with the letters is facing up. Otherwise, I don't think the…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
Edit: 8/22/2022 Added Vertical mount with cable support and zip tie slots. Both Haptic Bridge mounts bolt to the side of 40 series profile, like the 40x160mm chassis of a SimLab P1/X. It uses: 2 x M4x16 bolts with M4 T-nuts 2 x M4x8 bolts…
This is an alternative version of the P2000 pedals haptic adapter that uses heatset inserts instead of nuts and bolts. The adapter works for all pedals including the brake pedal, providing proper clearance for full functionality. Designed…
This haptic 3D-printed educational aid helps blind children develop fine motor skills and shape recognition. The set includes columns where students must sort and place squares, triangles, circles, and rectangles based on touch. By…
I made this easy design for my wife who is a teacher in an German elementary school. The idea is to allow children to learn the letter of the alphabet in a haptic (by touch) way.
Instructions: The following text provide the basic instructions how to make the haptic design from a diagram or picture. Get the required graphic. In our case we used graphic from Gambian secondary school book. Convert the image in to svg…
This haptic 3D-printed educational aid helps blind students understand fractions through touch. The set includes fraction pieces representing eighths, quarters, thirds, halves, and three-quarters. Each piece has a distinct size and shape,…
This is a mod of the SRT Gearbox to allow a little more free play in the gearbox in the locked position along with a gear grind haptic feedback effect using a large rumble motor. The mode of action is by integrating 4 magnets into a…
Print instructions Drop files into the slicer “UltiMaker Cura” will do Change nozzle size to 0.4mm on the printer Set infill density to 20 or 40% Change the print speed to around 70 to 80% Start print Take note that I am a novice to…
Finger Box for memory in the dark (print 2×) and an empty one to fill with ...
WristVibe is an open-source wearable device that can be worn on the wrist for prototyping haptics.
My first successful design. Requires a 608 bearing and 2 8x3 magnets I used a vise to seat the parts. Any feedback would be greatly appreciated.
This is a prototyped motor mount for T300 pedals. The motors used in this model are the haptic feedback motors from the Xbox One controller. There are slots to use zipties to hold the motors in, but be careful, as the outer holes need to…
Haptic toy Screwing haptic aid each nut is 15mm high. The thread has a large enough tolerance for easy rotation. The surface of the rings is patterned for easier grip. Press the rings with a 10mm brim. I would like to add various nuts and…
Back to perfect balance! ⚖ The Classic Pocket Clicker features two identical, precisely engineered gears that interact with each other for a smooth, steady, and incredibly satisfying tactile feedback. Since it's split into 4 separate…
INTRODUCTION: This model is a haptic atom diagram for the visually impaired people. PRINT INSTRUCTION: Filament: PETG Infill: 25% Perimeters: 4 Layer Height: 2mm
This is a remix of Martin Majewski's design , specifically overhauled for the Simsonn VAM Pro haptic motors. The goal was to create a rock-solid connection between the motor and the Fanatec CSL pedals to ensure 100% vibration transfer.…
Introduction This haptic model is representing a food pyramid that can be used by visually impaired individuals, to understand how the food pyramid is structured. Print Settings: Filament: PETG Layer Height: 0.3mm Perimeters: 2 Infill: 25%
I designed this spool for the v4 haptic glove for LucidVR gloves as the original v4 haptic spools often had difficulty printing due to the thin wall of the spool. I have not tested these spools so use at your own risk. I take no…
This 3d printed mount is an add on to the Vaessen Motorsports VP-2 to add the Simagic Haptic Reactor. It is made to be easily printable and will retrofit easily to the pedals. To install this, you will need 2x M8 x 10 cap head/button head…
This dome is used for housing this model of ERM motors. Cyanoacrilate glue is used to attach the vibration motor to the dome. Suggested 3 permeters at least with > 30 % triangles infill.
A simple fidget stone for carrying around and keeping your hands busy during boring stuff. Can be printed with standard settings / infill. Try 20% Lightning infill and translucent filament for a neat effect when you hold it up to the…
OpenScad files available to customize the Letters or entire words.
directly use the 58mm sieve of your quickmill or other comparable porta filter with this Baratza Forte scale adapter to grind your coffee This remixed version has some improvements like e.g. haptic guide and a front indicator update…
These are the printable files for my VRChat haptics project, there's one body of the controller, then the individual nodes that you mount around your body to feel the touch of another player. First the game has a mod loaded in that…
Uses a thrust bearing and 14 embedded round magnets to create a smooth haptic rotation fidget toy. Use only the center magnet if you don't want the “stops” during rotation. Put a pause command in your gcode using your slicer to pause the…
Manufacturing procedure: Material: PLA, PETG 3D Printer: FDM 3D printer, average print time 3-10 hours, depending on complexity Slicer settings: 0.2 layer height Post processing instructions: Clean the stringing, confirm the braille text…
Simagic Haptic Mount for VRS Brake which puts the haptic on the pivot instead of behind the pedal face. I found this feels more like the pedal is pushing your foot than just vibrating.
Dual and single vibration motor mount for the Moza SRP and SRP-Lite pedals. Designed for 24 mm vibration motors (pictured with 24 mm × 30 mm motors). Original design holds two motors, allowing you to run one for high-frequency vibrations…
Adapter, that allows you attach the Simagic haptic driver to your DIY pedals.
Mountable Belt tensioner system guide on the Next Level Racing ERS3 Haptic seat. Its purpose is to ensure proper routing and alignment of the belt under load. The guide is intended to work with a threaded rod mounting solution and…
Mounts for Simonn VAM Haptics elements to Moza CRP2 pedals. Suitable for Simonn VAM Pro, VAM Neo and Simonn VAM2. Print with 4-5 walls, 45% infill and some strong material (PC blend,ABS,ASA,PETG,...) . I used PETG-CF. To mount Haptics to…
Jeeps (Grand Cherokee in my case) with 4xe powertrains have the mode switch placed where it is very difficult to use safely while driving. This solves that by adding small elements that give haptic feedback with different shapes. Just…
Haptic 3D-printed educational tool which helps visually impaired students learn shapes through touch.
I made this adapter to fit Dayton audio TT25 pucks for sim racing pedals. Offset to fit Simgrade VX-Pro pedals. SMRK2 adapter is needed. Inside bolt pattern is for adapters to fit Simagic haptic pedal reactor. I used this model…
This haptic 3D-printed tactile math scale is designed to assist blind students in learning numerical concepts. The scale consists of a flat plate with 11 positions, ensuring it always starts at zero. Braille numerical labels can be…
Design Concept The Haptic Coin Fidget is designed to provide a tactile sensory experience through smooth, satisfying gliding motion of its two coins. Purpose This model is perfect for those seeking a discreet and handheld item to help…
Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts
I added holes of various sizes because everyone likes that You need 6 - 6 mm X 3 mm neodymium for each blade of awesome Enjoy this ultra engineered magnet slider fidget. Put a pause in your slicer and the right height or use the supplied…
Haptic Fidget A pocket-sized, high-tactility fidget designed for those who crave sensory feedback. Moving away from the smooth, silent fidgets of the past, this model features precision-engineered "micro-ridges" on the internal sliding…
Magnetic Detent Fidget Coin A compact everyday-carry (EDC) fidget coin built around a simple idea: as the two halves rotate against each other, embedded magnets snap past one another and create clean, repeatable detents — a soft, clicky…
Žáci si z mapy.cz stáhnou haptické mapy okolí školy, převedou z bitmapového souboru do vektorového a poté upraví v aplikaci TikerCad pro tisk.
The essential part to start with the Haptic Collection Media Player, a project to integrade digital content to small museums and collections. For more Informations on the project see the GitHub Repo:…
This bracket allows the new Moza haptic pedal to be hooked up to a Logitech G920 and G29 pedal set. 12 min print
This cube was used as a passive haptic prop in virtual reality (VR) experiments on overground walking at the University of Canterbury, New Zealand. A virtual copy sat at exactly the same position in a 1:1 virtual replica of the lab. When…
Presentation Shifting at the right moment is really important to be fast on track which is why this model was designed to fit a small dc motor with a microcontroller to generate vibrations when you have to upshift How it works The system…
Allows you to mount your Simnet Haptics to the Fanatec CSL pedals. Additional M5x35 and a cap nut needed. The white plastic parts were never attached on my Pedals, if youre using them, maybe you need longer screws holding the Pedal plate.
Žáci se v úvodní části seznámí se základními principy 3D tisku a registrují se do programu Tinkercad. Po krátkém seznámení prostřednictvím připravených výukových lekcí vytvoří dvojice.
Made from leftover miscellaneous 3D printer parts. A finished spinner has one gear which I refer to as a wheel, driven by a finger. Small and large sizes. You can just make one half of a wheel if you don't want a reversible one. You can…
I could not find a good free model for the SIMJACK Ultimate (UT) brake pedal, so I made one. It does not use the plate that comes with the motor. Print circular side on the plate, support on build plate only. Use Loctite for pedal plate…
Bracket / Holder for simagic board pedals P2000 or Haptic for alliminium profile. Assembly: Remove the back plate from the board and attach it to the printed part. Use the same screws as before. Easy to install. M5 screws for alliminium…
I designed in Fusion 360, use at your own risk (hurts a lot) Use tree support or normal support for the overhangs
Simple Adapter to mount any Simagic Haptic Reactor on an Simagic TB-RS Handbrake. Used Screws: - 2x M4x12 - 2x M4x18 - 2x M4 Nuts
