Search results: heate

Sort order

Counting matching models…

P
Printablesecsv

Parametric heater sidewall clip/Brötje Klemmbuchse

The Brötje radiators use 4 plastic clips (2 on each side) to hold the metal side panels. They have to be attached to two pipes inside the radiator. They are rather tight and tend to break when removing one site panel for cleaning…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
8
Rating
0
P
PrintablesMiadele

24 mm socket for removing RV water heater drain plug

This was design to fit the very tight space for removing the water heater drain plug on my motorhome.

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
12
Rating
0
P
PrintablesColicab

Shaft (rod) for Junkers boiler/gas heater knob

Cut whole or rest of original shaft, drill 5mm hole with 3mm diameter and insert rod. Shaft is cut so carefully insert to match old values, e.g. on 0. Designed to be little loose in order to easy future removal. Tested in PLA and PET.…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
3
Rating
0
P
Printablespalladin

Mercedes-Benz Heater and Control Knob inside

Inside of older MB cars knob. Sometime need small adjustment by knife :-) PETG - 15mm

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
57
Likes
4
Rating
0
P
PrintablesChorchie

Heater bracket and deflector for Printed Solid enclosures

My MK3S+ is in a Printed Solid enclosure in an unheated garage - in the winter, it is too cold for the printer, so I designed a heater bracket to heat the enclosure to a working temperature. This heater bracket was designed specifically…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
3
Rating
0
P
Printablesrndavis

M3 Heated Insert - Dimensions Test #1

Different geometries to try with M3 Heated Inserts. Initial testing done with PETG - simple 4mm diameter hole featured the best results for generic M3 heated-inserts. Necking down towards the bottom of the hole to form a counterbore…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
15
Likes
3
Rating
0
P
Printablesmorap

Duct for Anycubic Mono X - X6K SLA Printer Heater

Ho disegnato questo condotto per evitare che il flusso d'aria calda del riscaldatore generasse dilatazioni termiche non volute della piastra e del modello, evitando così che la stampa abbia righe evidenti e spostamenti. Questo condotto si…

Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0
P
PrintablesJed LaRue

Theater Chair Mug platform

Theater Chair Mug Platform I made this so we could use our theater chair cup holders for Mugs with handles.

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
2
Rating
0
P
PrintablesReviloRedab

Chopstick Cheaters (not just) for the kids

ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…

Downloads
6,675
Likes
2,904
Rating
4.84
P
PrintablesIBNobody

MK4 Nextruder Nozzle Change Heater Block Clamp

Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…

Downloads
4,237
Likes
1,027
Rating
4.98
P
PrintablesFinn

Omni Press (Drill Press & Heated Insert Press)

For bambulab users: you can find the model including print profiles here on makerworld . I wanted a drill press for my Dremel, as well as a dedicated press for installing heat-set inserts with my soldering iron. Since there are already…

Downloads
3,708
Likes
2,468
Rating
4.91
P
PrintablesBananenminister

Ender 3 S1 / S1 Pro heating bed cable chain/holder + gulfcoast heated bed prototyps

Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…

Downloads
3,526
Likes
577
Rating
5
P
Printableswerner_rh

Filament dry box - heated, ventilated, Arduino controlled

Bau einer beheizten und aktiv belüfteten Filament Trockenbox. Gesteuert durch einen Arduino Nano. Gebaut aus einer Ikea365 10,4L Vorratsbox, ein paar elektronische Teile und ein paar Teilen aus dem 3D-Drucker. Alle Teile sind leicht zu…

Downloads
3,016
Likes
425
Rating
5
P
PrintablesMrViddy

Chopstick Cheaters Helpers Trainers

Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr

Downloads
2,460
Likes
460
Rating
4.95
P
PrintablesMarkmeister26

Ender 3 S1 Pro Heated Bed Cable Chain

Ender 3 S1 Pro Heated Bed Cable Chain. This chain link provides the offset needed from the heated bed to the printer. I used a little bit of Automotive black silicone to adhere the bottom part to the machine. You need to print: 1x…

Downloads
2,045
Likes
332
Rating
4.86
P
Printableshumebeam

Python - Ultimate Bambu Lab AMS - Actively Heated Enclosure

Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…

Downloads
1,939
Likes
269
Rating
4.85
P
PrintablesBram Elema

(Un)original Prusa Heated Drybox

As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: Disclaimer: This…

Downloads
1,790
Likes
857
Rating
4.59
P
PrintablesJJ Irons

Anycubic Kobra 3 Rear Cable Chain (For Heated Bed)

This model might not be strictly needed to prevent the wires from being damaged as they are pretty beefy, but having all the wires on the printer match is fun! The design uses 17 ChainLatches, 17 ChainLinks, 1 ChainEnd, and 1 ChainStart.…

Downloads
1,728
Likes
194
Rating
4.7
P
PrintablesIce992

K2 Plus CFS Mod - Heated Chamber - Space Pi Double

I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…

Downloads
1,224
Likes
498
Rating
5
P
PrintablesNoizie Works

Qidi Plus 4 chamber heater shell replacement

UPDATE: I have replaced the files with STEP so it's easier to remix as QIDI changed up the mounting locations and i don't have acces to this data. Attempt this fix at your own discretion! Only work on the heater with the power off and the…

Downloads
1,099
Likes
217
Rating
4.67
P
PrintablesPython-1

60 degrees heater bed cable cover

Less stress on the wiring and more gap for twisting than shorter model. Slightly longer (9mm) but less prone to insulation melting. Modified from original Prusa model files. Use with original clip

Downloads
1,096
Likes
147
Rating
4.93
P
PrintablesFunFunBoy

Heated Bed Installation Jig for Voron 2.4

The front edge of the print plate should sit 38mm behind the front edge of the frame so here is the jig for that.

Downloads
1,054
Likes
184
Rating
5

Thumper and Morrigan "Cheater" metal gear transmissions

!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…

Downloads
978
Likes
134
Rating
5
P
Printablescothyh

TZ V2 Hotend (Bambulab Hotend Derivative) CAD with sock and heater

Cut out the sock and heater from Said's model and pasted onto this version

Downloads
944
Likes
59
Rating
5
P
Printablesmrgnarvar

Centauri Carbon Heated Chamber Mod

Updates: After printing mine, I realized my 6mm x 2mm magnets were too weak. The heater is held to the wall but uses the power cord to stay up, added a 10mm and 8mm magnet version Added a clearance hole for the heater button Added a 2mm…

Downloads
929
Likes
235
Rating
5
P
PrintablesKeram

TZ E3 V2 Hotend (Bambulab Hotend Derivative) CAD with sock and heater

Heatsink was completely reworked, collets were remade as close to original as possible. Since provided model was fused into one solid, E3 Collet is rough estimation according to drawings/photos. CAD is accurate to provided technical…

Downloads
900
Likes
72
Rating
5
P
PrintablesStargazerSteve

Ender 3 S1 Pro heated bed cable deflector

This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…

Downloads
871
Likes
104
Rating
4.4
P
PrintablesVoxel3D_NL

COREBOXX Heated Semi-smart add-on

The COREBOXX Semi-Smart is an advanced electronic upgrade for your filament storage system, enhancing usability, safety, and functionality. This modular system integrates filament chamber heating, real-time monitoring, and quick control…

Downloads
847
Likes
209
Rating
5
P
PrintablesFruntke

V2 - UPDATE: TRUMA Heater Airflow Deflector for Motorhome – 360° Adjustable Direction

UPDATE: V2 Da die vorherige erste Version nach Benutzung und anschließender Fahrt mit dem Wohnwagen immer wieder herausfiel oder sich sehr leicht lösen ließ, habe ich mich dazu entschlossen das Teil so zu modifizieren, dass es nun in die…

Downloads
825
Likes
56
Rating
5
P
PrintablesWürth

Würth T-bleed key for Heaters

T-Bleed key for Heaters The Würth Air Bleeder Tool is designed to facilitate the removal of air from the heaters/radiator, which is essential for maintaining heatrer efficiency and preventing potential loss of heating capacity due to…

Downloads
818
Likes
147
Rating
4.82
P
Printablesfifindr

Heater Bleeder

Use 3 walls and tree supports on build plate only for water catcher. A simple tool that makes bleeding radiators cleaner and more convenient by catching the water released from the bleed valve. The design consists of two parts : A…

Downloads
787
Likes
331
Rating
5
P
PrintablesFunkyArt

Heater bleeder (Heizungsentlüfter)

It is again the time to throw the heaters on, also the time to bleed the heaters. I have already printed something similar some years ago but unfortunately no longer found therefore I have tinkered a new one. No support needed, just part…

Downloads
785
Likes
182
Rating
4.83
P
PrintablesHawwwran

Better Bathroom radiator heater towel hook hanger

Simple and stable hanger hook. Click fits Stays tightly on place 2cm rail diameter Print instructions PETG is the best, but PLA works great as well. 0.3mm layer height is just fine.

Downloads
766
Likes
115
Rating
4.86
P
PrintablesMyco Dogs

Induction Coil Heater/Sterilizer

Print flat sides down no supports. To use, plug into 12v 10amp power supply. Insert tool into coil and hold down the button until it glows, this usually takes a few seconds. Assembly instructions: Insert both the button and the power…

Downloads
734
Likes
46
Rating
0
P
PrintablesAllTheHobbies

Sovol SV06 Bed Heater Cord Support

Relieve rubbing of the cord on the table, corner and frame. Keep cord parallel to the bed movement. Presses onto cord no fastening required.

Downloads
732
Likes
104
Rating
4.89
P
PrintablesShawn

Heated Power Cable Guide for Prusa Mini

Certain times through a print I noticed the cable catching on the corner of the power box, with a slight bump as the bed pulled it over. This clip just ensures a forced direction for the cable which does not interfere with the power box.…

Downloads
731
Likes
140
Rating
4.83
P
PrintablesOneTwo

Anycubic Kobra S1 Fan duct (almost 360°) for upgraded hotends with ceramic heater (not for stock)

Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…

Downloads
711
Likes
106
Rating
3
P
PrintablesEmbrace Making

Creality Ender 3 Heated Bed Strain Relief System

The Creality Ender 3 comes with minimum thought put into the cable management aspect of the machine. This could lead to broken and shorted wires, or cables getting caught on other components of the machine leading to damage or print…

Downloads
650
Likes
87
Rating
4.86

Ender 3 S1 Plus Cable Chain (Heated Bed)

The Ender 3 S1 Plus has a slightly different heat bed cable positioning (and it's also bigger), so I mirrored the offset chain link to fit the specs. I also recommend printing the cable bracket link laid down with minimum support. I…

Downloads
625
Likes
84
Rating
4.8

NexGen3D: Chamber Heater

Im proud to release the version 1 of my universal chamber heater, the control system and power setup will be up to you, I will add these details later on the next version. BOM: 1 x 24v 7530 Dual Ball Bearing GDStime Blower Fan…

Downloads
622
Likes
314
Rating
5
P
PrintablesDarkSunShine

Opel Astra H Heater Mix Flap (Mischklappe ) repair adapter (2004-2010)

How to diagnose a failed heater flap: There is no hot air blowing from the HVAC in the Astra, First checked the coolant in the engine, if there is none, you might have a bigger problem. Check if the the mix flap solenoid is working by…

Downloads
608
Likes
21
Rating
0
P
Printablesosirisad

Ford 2.0L Heater Hose Disconnect Tool

You can buy this model printed in PETG along with the needed gaskets so you don't have to buy a 50 pack, message me! Disconnects the Heater Hose Fittings on 2012-2018 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Eco Boost. This video…

Downloads
579
Likes
24
Rating
5
P
Printableszemlin

Creality K2 Plus Chamber Heater Recirc Mod

Updated - On my second K2 the 90mm fan spacer interfered a bit with the purge chute, so I opened up the clearances around that a bit more. It wasn't sitting right on the can and got pushed in enough to interfere with the blades and cause…

Downloads
569
Likes
121
Rating
5
P
Printablesjmynheir

Seatbelt Cheater Ford Focus

Seatbelt cheater designed for a 2010 Ford Focus. For all legal purposes, or whatever, I'm not your mom. Category: Vehicles

Downloads
564
Likes
31
Rating
0
P
PrintablesPugwash

Diesel Heater Control Panel Wall Mount

This is a replacement wall mount plate for the control panel of the popular Chinese diesel heaters, as used in many self-built motorhomes. It clips the control panel into place the same as the original mount using the same screw…

Downloads
523
Likes
61
Rating
5
P

Qidi Plus 4 Safer Chamber Heater [Updated]

Remix of Noizie Works awesome chamber heater shell replacement, with several design improvements. He has given me his blessings to remix the hell out of this. Removed previous thermocoupler wire path. Added through barrier wire path.…

Downloads
513
Likes
119
Rating
5
P
PrintablesKraemer

EcoFlow WAVE 2 Portable Air Conditioner with Heater Exhaust duct connectors

Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…

Downloads
487
Likes
30
Rating
5
P
PrintablesNolson 8

Diesel Heater Tent Vent

HARDWARE NEEDED: 4 x m5 heated inserts 4 x m5x12 screws 4 x m3 heated inserts 4 x m3x8 screws PRINT SETTINGS: Base: Infill: 20% Walls: 3 Support: Yes, Normal (manual) Tube: Infill: 20% Walls: 4 Support: Yes, Tree (auto) Controller Mount:…

Downloads
470
Likes
39
Rating
5
P
PrintablesHawwwran

Symmetric Rail / Panel heater hook hanger

Dead simple but very useful symmetric hook hanger. Hang it on bathroom rail heater. It click fits! It stops on the bars under the one you hang it on (stops wiggling). Hang it on the panel heater. It fits in the top holes. Useful to hang…

Downloads
459
Likes
54
Rating
5
P
PrintablesNodashi

Diesel Heater Legs

Simple model to elevate the diesel heater so the exhaust pipe does not come in contact with anything. This is for the tall and slim all in one models. I used 4 M5 screws that thread into the plastic foot. But if you have a screw long…

Downloads
457
Likes
63
Rating
5
P
Printablesprouting

Puller Nozzle Heater and Thermistor Connector Elegoo Centauri Carbon -Updated16Feb26-

Tool for remove the XH 2pin connector nozzle heater of centauri carbon Updated (16Feb26): Added New puller for ZH 2pin with printed spring. Updated (15Jan26): Added New puller for XH 2pin with printed spring. This version prevents the…

Downloads
450
Likes
77
Rating
5
P

Panda Breath Heater Mount for Snapmaker U1

I recommend printing from PETG CF, better from PA CF. Attention - the upper elements must be compressed. The special feature of the mount is that you can quickly remove and put back the heater.

Downloads
438
Likes
80
Rating
5
P
PrintablesKutilman Yuri

Radiator degassing / Heater venting drain tool

Radiators/water heaters should be degassed before the heating season to increase efficiency of the heating and prevent issues. Every time I used a cup or almost anything to vent the radiators I got water on the floor or on the wall.…

Downloads
437
Likes
180
Rating
5
P
PrintablesFleeeinIan3D

Centauri Carbon 7.5 mm Panel Spacer with Wire Relief for Chamber Heater (Creality)

Before you print, please read everything below carefully... What: Based off of SE3Ds 7.5 mm panel spacer, I modified one of the lower pieces to have two wire relief holes to be able to route a creality chamber heater inside the printer.…

Downloads
428
Likes
61
Rating
4.92
P
PrintablesE3D

Connector clips for HeaterCore wiring

MODEL DETAILS Connector clips for the joint of your wiring where the HeaterCore and extension cables meet. This is not a mandatory part of the installation. You will need 4x cable ties. RECOMMENDED PRINT SETTINGS No support material is…

Downloads
403
Likes
66
Rating
4.67
P
Printableswhatthefilament

Heated Insert Press Bracket

An updated bracket for the Adafruit Heated Insert Press (https://learn.adafruit.com/heat-set-rig) The original bracket requires 4 screws to hold the top plate in place. I wanted to be able to remove my soldering iron quickly without tools…

Downloads
396
Likes
94
Rating
4.8
P
Printablesgam3fr33k

Tragedy and Comedy Theater Masks

Remixed model to lay flat for wall mounting.

Downloads
395
Likes
24
Rating
0

Truma heater vent air splitter

For a 55 mm ID air outlet. You can connect a 22 mm OD hot air pipe to the four outlets and plug them in your wet shoes/boots . Test print with PETG, 0.25 mm layer with supports. It's possibly better to use ABS/ASA but I don't have this…

Downloads
363
Likes
35
Rating
0
P
PrintablesCrambambuli

Voron 2.4 heated Chamber with Fans

This mod allow you to install two additional Fans under the bed. I am getting about +10°C 4x M3 Inserts.. to mount the Fans. (Voron BOM) 2x M3x8 (Voron BOM) 2x T-Nuts for 2020 Aluminum Extrusion (Voron BOM)

Downloads
359
Likes
95
Rating
5
P
PrintablesNoizie Works

Printable PTC heater all-in-one enclosure module

Printed in ABS you can watch more instructions in this video: https://youtu.be/Fi0ZqGbZryw Editor note: I want to add that installing some kind of fuse is gonna be a good idea and if you pass the wire true the metal to use a rubber…

Downloads
345
Likes
122
Rating
5
P
PrintablesTinker

Resin printer heater

This is a remix of ANYCUBIC MONO X HEATER by JVJV - Thingiverse I found that there was a need for more room inside for cable management, so I have extended the compartment for the thermostat. Text below is copied from the original…

Downloads
342
Likes
95
Rating
4.67
P
Printablesstew675

Qidi Plus 4 Lengthways Chamber Heater Casing

Replacement Chamber Heater Cover Unit for Qidi Plus 4 Model Update: I've added a revision to the original model that includes a more curved path towards the outlet which slightly improves the overall air-flow. These models will have the…

Downloads
340
Likes
112
Rating
5
P
PrintablesDLD Design Fab

4 inch 90° RV Heater Duct Elbow

RV 4 inch flex hose repair elbow. This was created to address sharp 90° transitions in RV's like the Forest River Salem Cruise Lite that lead to broken/torn heater flex hose. Under the fridge, a 4 inch flex hose is routed right behind the…

Downloads
338
Likes
28
Rating
5
P
PrintablesSabineL

Heater vent key - Heizungsentlüfter-Schlüssel

Needed a quick key to vent my heaters where the skrew driver slit was dead. Works in normal german central water heaters. Used PLA, but PETG would be more stable. Used Prusa Mini+ with 0.4 Nozzle.

Downloads
336
Likes
31
Rating
4.6
P
PrintablesAdrunkleaf

Wago mounts for Honey Badger Bed Heater

These wago holders are used to mount the wagos included in the Honey Badger bed heater installation kit. Use the 412 for 2 port wagos, and the 413 for 3 port. Use standard Voron print settings.

Downloads
332
Likes
42
Rating
5
P
PrintablesCoordSpace

Qidi Q1 Pro Heated Chamber & Electronics Bay Vent

This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…

Downloads
331
Likes
58
Rating
5
P
PrintablesDominik

hook fot towel-heater / Haken für Handtuch-Heizung

This hanger will clamp to the heater and stick. Use the f3d file to adjust all parameter according to your needs. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: No Resolution: 0,02 Infill: 10%…

Downloads
326
Likes
25
Rating
5
P
PrintablesJeffTH

75mm Diesel Heater Pipe Connector

Use a filament that can withstand the temperatures. ABS works fine.

Downloads
326
Likes
31
Rating
5

Heated filament dryer box

I have been working on this for a while. I didn't want to pay over a hundred dollars for a 4-spool heater that was mediocre in heating the filament. The box is more effective than I thought it could be. When I had 7/9 spools loaded the…

Downloads
325
Likes
162
Rating
5
P
PrintablesAndrey Puchkov

Chamber heater for FlashForge 5m

Нагреватель строго рекомендую печатать из термостойкого материала, в идеале не поддерживающего горение. При использовании нагревателя на 200 Вт рекомендую использовать внешнее реле на ток не ниже 20 Ампер Терморегулятор:…

Downloads
324
Likes
157
Rating
5
P
PrintablesHargoHub

Chopstick Cheaters - 5 Models

These are helpful when someone is still learning how to use chopsticks. Depending on how the chopsticks break, you might need to shave down the wood a bit to make it fit properly Printing notes: The “Basic” Chopstick Cheater in the photo…

Downloads
313
Likes
37
Rating
0
P
Printableskluiten

Diesel Heater in a Weatherproof Case

These parts were inspired from a design by KeeganBuilds (YouTube). I modeled these parts in OpenSCAD to fit the components from a 2 kW diesel heater kit and have included the .SCAD files below so others can modify to fit heaters with…

Downloads
308
Likes
52
Rating
5

Ender 3 (Pro) 90° Heated Bed Cable Strain Relief

I build the Lack enclosure for my Ender 3 Pro but the cable of the heated bed constantly was bended in weird was at the back panel because a couple of centimeters were missing. My solution is a cable strain relief replacing the original…

Downloads
298
Likes
58
Rating
5
P
PrintablesEdinSimon

Tentbox Cargo Diesel Heater Adaptor

Adaptor to change the 80mm Dia to one which can be between the zipper. Fusion360 files included.

Downloads
298
Likes
52
Rating
5
P
PrintablesDenat Studio

Truma E2400 Heater Exhaust Cover D95mm

I had this second hand gas heater, the Truma E2400, but this part was missing and it appears to be smaller in diameter than the spare parts you can buy …. So I designed one (from pictures & measurement of the parts you screw it on) and…

Downloads
294
Likes
21
Rating
5
P
PrintablesGeorge

Prusa Core One Plus – Heated Bed Cable Entry Cover (Multiple Styles)

Update – Version 1.2 Design Update: Added a lightning bolt icon to represent the power lines. Improved Clearance ("Large Fit"): Transitioned from a "perfect fit" to a "large fit" . The extra room for the rubber grommet and cables makes…

Downloads
288
Likes
106
Rating
5

Prusa - Heated Bed Cable Cover - Thick Wires

Modification to allow for thick wires on the Prusa Heated Bed Prusa Bear Printer Design by gregsaun https://github.com/gregsaun/prusa_i3_bear_upgrade

Downloads
282
Likes
23
Rating
5
P
PrintablesScott Tate

Seat Belt cheater for 2021 Ford Ranger

Seat Belt cheater for 2021 Ford Ranger

Downloads
280
Likes
31
Rating
5
P
Printablesbartosslajos

Valeo 656134A - C Gear (Replacement Renault Clio II/Thalia Air heater flap actuator motor gear)

Renault Clio II. / Thalia ventillation system one of the gear usually breaks. This is a replacement gear. Need some voltage reduction to not breake the 3D printed gear.

Downloads
268
Likes
19
Rating
5

Elegoo Centauri Carbon active chamber with Creality Chamber Heater

Хочу поделиться с вами моделями, которые я делал в ходе модернизации своего принтера Elegoo Centauri Carbon, чтобы получить активную камеру. Всего это 5 файлов: Фиксация проводов для вывода их из камеры (2 файла), рампа для циркуляции…

Downloads
264
Likes
66
Rating
5
P
PrintablesR3men

K1 / K1c / K1se SSR Mount for Bed Heater Upgrade

Print Install 2x 3*3*5 heat inserts Attach an SSR with 2 M3 screws Attach the mount on the rib next to the motherboard. BOM: 2x 3*3*5 heat inserts 2x M3 screws Creality K1 series heatbed upgrade - Graphite Bed available on Aliexpress: K1…

Downloads
263
Likes
20
Rating
5
P
PrintablesPC2CV

Peugeot 407 Heater flap reinforcement

Reinforcement parts for a Peugeot 407 heater flap. As used in this video The steel spine is not shown here as it is not 3D printed but easy to make elsewhere. The parts were printed from PETG 5 perimeters with 50% infill to give as much…

Downloads
261
Likes
10
Rating
0
P
Printableskadous

Heater vent key / Klíč na odvzdušnění topení

This is a tool for the home services. This model is prepare for a heater vent repair. Size of the square inside is 5x5 mm. Printing: Is it better to print it from PETG or ABS in laying down positionto make the tool stronger. For the print…

Downloads
259
Likes
26
Rating
4.5
P
Printablesindymusician

Heater Stand for PTC Heater

I designed this to get my PTC heater up off of the heated enclosure floor to allow airflow for the fan. Printed in ASA. No supports. The heater I used was this: Constant temperature Electric fan heater PTC fan Auto heater Small space…

Downloads
258
Likes
54
Rating
5
P
Printablesscottrouse

RV Water Heater Anode Port Cover

This is a threaded plug that is designed to fit in the anode port of a Suburban brand hot water heater commonly found in RVs and travel trailers. The plug has a grid-shaped vent to allow for airflow into and out of the water heater…

Downloads
257
Likes
47
Rating
5
P
PrintablesMrDic

Lego Heater Shield (Wolfpack & Blank) 10:1

I decided to make my Lego Skeleton in to a castle era model. Looking online there were not any high quality shield STLs available. Using a stl from printablebricks as a template, I rebuilt it in tinkercad and included the classic Wolfpack…

Downloads
255
Likes
47
Rating
0
P
PrintablesJevermeister

Voron V0.1 3x Wago 221-412 mount for the bed heater

Voron V0.1 3x Wago 221-412 mount for the bed heater Based on the Voron V2 / 2020 mounts by Boingomw which you can find at https://github.com/boingomw/VoronUsers/tree/master/printer_mods/Boingomw/Wago_mount Use 2x M3x8 SHCS to secure them.…

Downloads
248
Likes
36
Rating
5
P
Printablesadsiemer

MK3 60 Degree Heated Cover

Shrinks the footprint of the printer in the y-axis. 60 deg so that x and y cables never rub and decreases strain on cable wrap. Uses stock M3 hardware but screw heads on top making it easier to assemble. This print only works with the…

Downloads
248
Likes
36
Rating
4.33
P
Printables3DPrintDemon

TARTARUS Heater Core Module! PTC chamber heater enclosure. Top Hat Voron 2.4

…Please be sure to hit like & post a make, I'd love to see your prints! WARNING! If you do not know how to wire this system correctly & safely I STRONGLY recommend you DO NOT attempt to print or use this model as you are dealing with…

Downloads
247
Likes
146
Rating
0
P
Printablesglennvr698

Centauri Carbon Cradle for Chitu Mini Heater H2

Description Here is a mounting solution for Chitu Systems Mini Heater H2 inside the Centauri Carbon. Installation This mounts to the M3 threaded hole located on the left side of the printers base. I used Fleeeinlan3D's version of SE3D's…

Downloads
245
Likes
37
Rating
5
P
Printablestyler

Prop opera glasses / theater binoculars

Designed this prop opera glasses / theater binoculars for a friends birthday. There are holes so you can look through them. I printed them "looking" upwards. Supports are needed for the middle bit and under the arm. Enjoy! Category: Props

Downloads
244
Likes
9
Rating
0
P
Printablesbloblob

Mystery Science Theater 3000 Modular Silhouette

This is a modular 3D printable silhouette based on the TV show Mystery Science Theater 3000 (MST3K). Put it on the your TV, computer screen, or even a window! MST3K Silhouette.stl has the 3 characters and is just over six seats wide, and…

Downloads
243
Likes
42
Rating
0
P
Printables4cmclean

Mars 4 Ultra Resin Printer Heater Bracket with Antenna Mounting

A heater mounting bracket for the Elegoo Mars 4 Ultra Resin printer using a specific off the shelf 12v 5 amp heater unit. https://www.amazon.com/dp/B0BL6WZPM9?psc=1&ref=ppx_yo2ov_dt_b_product_details…

Downloads
239
Likes
26
Rating
5
P
Printables@3DTimeSculpt

Elegoo Centauri Carbon Chamber Heater

I designed this Chamber Heater Adapter for the Elegoo Centauri Carbon to be a clean, secure, and fully reversible way to add active chamber heating to the printer—without drilling, cutting, or permanent modifications. This model is an…

Downloads
237
Likes
60
Rating
5
P
PrintablesVicoBim

Theater Mask - The innocent

An artistic mask, perfect for home decoration, artistic performances, costumes, or simply experimenting with painting and finishes. In this file, you will find the mask with or without the attachment system. I also added a .3mf files to…

Downloads
234
Likes
45
Rating
5
P
PrintablesAnthony S

Phrozen Sonic Mighty 8K/12K riser/lid spacer and PTC heater frame

This is a mod for the Phrozen Sonic Mighty 8K/12K. It is a lid spacer/riser and frame for a PTC heater and W2310 temperature controller. The spacer is used so that there is no drilling/cutting of the cover and base for cabling and…

Downloads
228
Likes
27
Rating
0
P
PrintablesNylon

Xerox Interlock Cheater

Tool for bypassing Xerox door interlock switches. A must-have for performing repairs on any Xerox production press. Compatible with most Xerox interlock switches 8 minute print No post-processing F3D file included Recommended settings: No…

Downloads
228
Likes
11
Rating
0
P
PrintablesStefan

Kids Gloves Dryer - Towel Warmers/Heater Hook

Winter has come and the children are outside all the time. They only come in briefly to eat at lunchtime. The robe drips every time. And the space on the towel dryer is tight. Towel dryer? There is no room for towels here! :D I designed a…

Downloads
226
Likes
103
Rating
5
P
PrintablesXboxusr666

Ender 3 S1 Heater Block Wrench

Example picture was made on hatchbox petg with 4 perimeters and 7 top and bottom layers, .16 layer height 80% infill probably overkill but it works

Downloads
224
Likes
38
Rating
4.75
P
PrintablesAlli Price

Fail-safe Chamber Heater SSR for Qidi Plus 4

This project enhances the safety and reliability of a the Qidi Plus4 chamber heater by upgrading critical components and adding multiple layers of protection. The modifications include replacing the original 5A Solid State Relay (SSR)…

Downloads
221
Likes
112
Rating
5