Search results: hermit

Sort order

110 models

P
PrintablesFlexi-Maker

Articulated hermit crab

This cute hermit crab model can be printed without a border and is designed to play with or display; the eyes can also rotate. This is a moving hermit crab that is wonderful to print. It was also tested with a border and comes off…

Downloads
3,559
Likes
459
Rating
5
P
Printables3DPrintyi

Articulated Cute Hermit Crab

Tips for printing: Filament: PLA Supports: Only for the Full Shells! Don't use supports on the other models! Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: classic Detect thin walls: No! Brim:…

Downloads
3,105
Likes
713
Rating
4.91
P
Printables3DPrintyi

Articulated Skeleton Hermit Crab

ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! BuildPlate: Smooth (Textured Build Plates not…

Downloads
1,179
Likes
262
Rating
5
P
PrintablesGEGCC3D

Hermit Crab Pool with Bubbler hook up

My friend upgraded her hermit crab enclosure so I upgraded my original pool model with a bubbler attachment. I still no nothing about hermit crabs so let me know if theres a way to improve it!

Downloads
793
Likes
77
Rating
5
P
PrintablesGEGCC3D

Hermit Crab Tilt-A-Whirl

It's a simple tilt-a-whirl, merry-go-round, or wheel for your pet to run on. I kept seeing these on Etsy and decided to design my own. To cut down on non-3D printed parts, I did not use bearings, but it still spins very well. For the…

Downloads
777
Likes
123
Rating
5
P
PrintablesNickDJM

Hermit Crab Water Bowl 2.0

A hermit crab water dish that goes on the surface of your substrate. I made the steps 0.5cm tall each for easy measurement of water depth. It fits ~1 cup of water pretty nicely, but you may want it shallower if you're concerned about tiny…

Downloads
752
Likes
83
Rating
5
P
PrintablesBillie Crabish

Sunny Circle Hermit Crab Food Dish

This was a fun little project I made. I wanted to make another food dish but with a cuter style. Initially, I made the one with only the little triangles and it looked like a sun in the middle which I really liked. Then I played around…

Downloads
701
Likes
71
Rating
0
P
PrintablesGEGCC3D

Hermit Crab Hideaway

I printed this originally in PETG but I'm sure PLA would be fine. I had to use supports to support the arch. Let me know what you think. I know nothing about hermit crabs. This will probably work for hamsters and other rodents as well.

Downloads
528
Likes
113
Rating
0
P
PrintablesBillie Crabish

Spinning Disc Hermit Crab Climbing Toy

This is a fun and creative way to keep your hermit crabs moving all night long. This climbing toy has a base and a disc on top that when assembled correctly, will spin freely for your hermit crabs to walk on. I made multiple designs and…

Downloads
485
Likes
62
Rating
0
P
PrintablesPeter Farell

Hermit Crab Time Shale

Hermit Crab Shell (Time Shale) home. 20mm ++ opening. updated timeshale.stl. (12/21/22) Old versions removed : the process of fixing the mesh mistakenly filled the interior. The new model timesale.stl has the interior removed and…

Downloads
461
Likes
83
Rating
5
P
PrintablesStacking Layers

BIQU HERMIT CRAB INPUT COVER

I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…

Downloads
457
Likes
37
Rating
5
P
PrintablesEric Charles

Pet platform for hermit crabs

Platform originally made for my friend's hermit crabs, but can work for a number of small critters. I printed this on a P1S. It works best being printed upside down with the ramp along the back of the printer. Tree supports recommended.

Downloads
417
Likes
64
Rating
0
P
PrintablesLali

Articulated Hermit Crab

A model of articulated hermit crab with movable limbs, claws, body sections, etc. The print-in-place crab and the spiral shell are separated. There are snap-fit structures on parts themselves for assembly. Supports are not required. The…

Downloads
346
Likes
98
Rating
5
P
PrintablesRuger

Hermit Crab Corner Climber

Large climbable corner structure for hermit crabs with removable tray at the top. Add foraging material in the tray and it is easy to remove and clean or empty. Structure is approx. 165x158. I recommend printing with PETG due to the high…

Downloads
332
Likes
48
Rating
0
P
PrintablesBillie Crabish

Circular Sectional Hermit Crab Food Dish

I wanted to make a food dish for my crabs that had different sections so I can see what they like. They really love popcorn so I made the center section as a kind of treat section and then the other main sections for hardier foods. I…

Downloads
331
Likes
53
Rating
5
P
PrintablesShampoo

Helldivers 2 - Thermite Grenade

For Super Earth! G-123 Thermite Grenade Are pesky Hulks turning your squad into paste? Are Shredder tanks treating you like last week’s ration pack? Fear not, Helldiver! The G-123 Thermite Grenade is here to light up the battlefield—and…

Downloads
305
Likes
70
Rating
5
P
PrintablesFleximania

Articulated Hermit Crab with Textured Shell

A fun articulated hermit crab figurine made in a detailed 3D printed style, featuring a textured shell, flexible segmented legs, and a bright coral color that makes it stand out right away. This playful collectible brings a beachy, quirky…

Downloads
287
Likes
32
Rating
4.5
P
PrintablesEric Charles

Pet Climbing Stick/Log (Hermit Crab)

I designed this as a climbing stick/log for my friend's hermit crab. I would imagine it could be used in various other animal tanks/cages. It is about 12 inches (305mm) long and 1.5 inches (38mm) wide. I printed mine with fuzzy skin. I…

Downloads
277
Likes
60
Rating
5
P
PrintablesNick Berardi

Hermit Crab StealthBurner Mount

WIP: This model is still a work in progress. I remixed https://www.printables.com/model/139183-ender-3-v2-voron-stealthburner-conversion to work on the stock hotend carriage for the BIQU Hermit Crab. Everything “should” be the same as the…

Downloads
272
Likes
44
Rating
3
P
PrintablesSteve Oliver

BTT Hermit Crab V2 - Canbus

Full Model of the BTT hermit Crab V2 canbus edition. All PCB credit goes to BTT and can be found on their github https://github.com/bigtreetech/HermitCrab/tree/master/HermitCrab2/3D - All other parts (except screws) modelled by me.…

Downloads
242
Likes
11
Rating
0
P
PrintablesNickDJM

Hermit Crab Water Bowl

A super basic hermit crab water dish that assumes you'll be putting it slightly lowered into the substrate. I made the steps 1cm tall each for easy measurement of water depth (since you don't want it too deep for tiny crabs). I originally…

Downloads
220
Likes
41
Rating
0
P
PrintablesSarkron

Flexi Hermit Crab with 3 Shell Options w/ magnets

Magnetic Flexi Hermit Crab This is an articulated hermit crab with swappable magnetic shells! There is a pause to add hidden 8x3 mm magnets in cavities on the tail so the crab can securely swap between different shell styles. Features…

Downloads
217
Likes
58
Rating
0
P
PrintablesGEGCC3D

Hermit Crab Pool with no Bubbler Attachment

A friend of mine needed a hermit crab pool, so I designed this. In order to make it water tight I would suggest using PETG with a wall width of 1.4mm. Try to make your layer levels as thick as you can. This will give water less spots to…

Downloads
210
Likes
24
Rating
5
P
Printables3d guy

hermit crab climbing wall

i cant wait to get hermit crabs and i want them to be happy here so i made a climbing wall

Downloads
195
Likes
30
Rating
5
P
PrintablesThatGuy

Helldivers 2 Thermite Grenade

original SolidWorks files are available, along with 3mf and stl files. supports needed

Downloads
176
Likes
49
Rating
5
P

The Rock - Articulated hermit crab (cursed)

An articulated hermit crab with more rock and more eldritch horrors.

Downloads
157
Likes
23
Rating
0
P
PrintablesJustMaiaMakes

Hermit Crab Pen Holder

A cute little hermit crab that can hold you pens and has a space under the shell! This also has a lovely space for the SD card insert that can hold 3 regular sized and 6 micro SD cards! You can sell however many prints you want with this…

Downloads
149
Likes
41
Rating
5
P
PrintablesDaniel Spitzer

Hermit Crab Circle Feeder

Circular hermit crab feeder with dishes for food and treats. Full scale is 5" in diamter. Can be scaled up or down to accommodate tank size. Printed in pla .4mm nozzle 15% infill.

Downloads
142
Likes
35
Rating
5
P
Printablesminimal3dp

Voron Afterburner with Orbiter 1.5 and Volcano Hotend compatible with the BIQU Hermit Crab

With the BIQU Hermit Crab installed, there are few options for hotend mounts that explicitly list compatibility. When combined with the Ender 5 Plus, it becomes even harder if I do not want to lose print space. 2022-03-13 - Update:…

Downloads
140
Likes
16
Rating
0
P
PrintablesZDickinson

BTT Hermit Crab CAN Cable Support

Print, screw to baseplate with 2 M3x8ish screws, zip tie USB-C cable to support, profit.

Downloads
134
Likes
17
Rating
5
P
PrintablesMr.JM

Thermite Grenade (APEX LEGENDS)

1: This Model is a Remix of the work from WF3D. “ https://www.prusaprinters.org/de/social/3516-wf3d/prints” Model: "https://cults3d.com/en/3d-model/game/apex-legends-thermite-grenade-spicy-sausage" 2:The remix was inspired by the work of…

Downloads
133
Likes
68
Rating
2
P
PrintablesRuger

Hermit Crab Cave

Hide is about 152 in diameter with a 80 wide opening. Recommend running this in PETG due to the humidity of hermit crab enclosures and turning on supports, I used tree and it turned out fin. Model is around 200g but with supports it…

Downloads
130
Likes
25
Rating
0
P
PrintablesZac Saprun

Hermit Crab Laser Tree 40W-AA Mount

A mount for the Laser Tree LT40W-AA diode laser to secure it to a Biqu Hermit Crab tool-changer. Two Models are included: A simple mount A Voronoi sketch version to match my personal Ender 3VO Theme The Lt40aa model was sourced from…

Downloads
115
Likes
13
Rating
0
P
PrintablesGreyH20

Grumbot from Hermitcraft

The model is about 6 inches wide, and 9 inches tall. I would recommend scaling down the faceplate, eyes, and mustache to about 98% so that it can fit in and be removed from the chassis in order to store items inside. If you do not want to…

Downloads
114
Likes
26
Rating
0
P
PrintablesHi

Hermit Crab

Realistic model made from Zbrush core mini.

Downloads
112
Likes
32
Rating
5
P
PrintablesBooks

Tarot Hermit Lithopane

A lithopane of the Hermit tarot card. Uses art from PublicDomainVectors.org . Mesh created using the ItsLitho service.

Downloads
108
Likes
24
Rating
5
P
PrintablesGEGCC3D

Support Free Hermit Crab Bridge

I designed this bridge for hermit crab enrichment. I couldn't really find any bridges that didn't use supports, so I designed this one. Let me know any feedback you have!

Downloads
105
Likes
28
Rating
0

Thermite Grenade from Apex Legends

The Thermite Grenade from Apex Legends! I saw a lot of other thermite files out there, but I never found one that had the thermite expanded out into it's active state. This model was created from scratch using in-game reference photos. It…

Downloads
104
Likes
44
Rating
0
P
PrintablesAdam Z

Hermit Crab Strain relief

Hermit Crab Strain Relief I made a strain relief that holds the wires really solid and in a vertical position to allow maximum height clearance. I used two M2 heat inserts in the top to holes to attach. I feel like you might be able to…

Downloads
101
Likes
9
Rating
5
P
PrintablesRuger

Hermit Crab Food Dish

Larger hermit crab food dish with 7 different sections for a variety of food. Recommend printing with PETG due to the higher humidity that hermit crab enclosures tend to have.

Downloads
95
Likes
19
Rating
0
P
PrintablesRuger

Hermit Crab Water Dish

Couldn't find a dish file large enough that i liked for my hermit crabs to fully submerge so I had to make one. The overall size is about 89x157x70 footprint. 63.5x81 basin at the bottom. I highly recommend running it with PETG, PLA…

Downloads
94
Likes
17
Rating
0
P
PrintablesColdChimp

Hermit Crab Stairs

Hermit Crab Stairs paired with a dollar tree bin, Cut out the depth for the stairs insert and allow around an inch for walls

Downloads
93
Likes
19
Rating
0

Hermit Crab - Colored for AMS

I remixed @Ryan_1788814 wonderful Hermit Crab creation and scaled up a bit. I added some color to it as well in Bambu Studio to incorporate the AMS. Color One is SUNLU PLA+ 2.0 Red Color Two is SUNLU Silk PLA Triple Color…

Downloads
86
Likes
8
Rating
0
P
PrintablesLief Erikson

Grian's Mansion Season 7 Hermitcraft

There are 90° overhangs everywhere so I am not sure how printable this is.

Downloads
83
Likes
14
Rating
0
P
Printableslosscutmajin

hermit crab cookie cutter

I was able to successfully cut out the cookie dough by chilling it sufficiently, lowering the room temperature, and dusting it with flour.

Downloads
79
Likes
27
Rating
0
P
PrintablesPlanetler

thermite talisman/charm/mascot/keychain (Rainbow Six: Siege)

Thermite talisman from Rainbow 6 Siege, ready for dual extrusion! Just klick "keep in position" for right placement when opening. Created with Microsoft 3D Builder Print Settings Printer: ctc Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
78
Likes
10
Rating
0
P
PrintablesReProps

G-123 THERMITE HELLDIVERS 2

TAKES A 1/2 IN ROD AND IS SPLIT FOR PRINTING. Category: Props

Downloads
78
Likes
28
Rating
0
P
PrintablesSomePrintDude

Hermit Crab Litho Press

A 3d printed Litho press for printing stone lithographs. Admittedly this press runs up to the limits of plastic, and can only print lithographs on thin papers (i.e. kitakata, newsprint, masa) To print on thicker western papers like…

Downloads
78
Likes
58
Rating
0
P
PrintablesJubo

Biqu Hermit Crab Drag Knife Mount

A drag knife mount for the biqu hermit crab toolchanger. The model is designed to be printed in PLA or PLA+. Use 4 M3x6 screws to mount the holder to the toolplate. Use 2 M3x6 screws to secure the rubberband. BOM: 6 M3x6 screws 6 M3x5x6…

Downloads
75
Likes
21
Rating
5
P
PrintablesPraetorianCZ

Biqu HermitCrab CAN Tool case

Needed a case and couldn't find one… Simple design, no special features. For assembly four M3x8mm screws are needed (two will be enough). No supports needed.

Downloads
74
Likes
5
Rating
5
P
PrintablesEric Krasting

Hygrometer/Thermometer Holder for Hermit Crab Tank

I wanted to get my gauge off the ground, and figured I might as well make it look aesthetically pleasing while also giving my son's crabs something to climb around on. Uses a round guage with a 41mm diameter rear insert. I got the one…

Downloads
72
Likes
11
Rating
0
P
PrintablesFlora B~

Hermitlux Mini Dishwasher sideway offset funnel

I couldn't pour the water into the dishwasher because the shelf was in the way. So I designed a funnel with a side offset. Now I can pour the water in much easier, faster and without a mess.

Downloads
71
Likes
5
Rating
0
P
Printables3d guy

hermit crab slide

i made a cool hermit crab slide

Downloads
70
Likes
23
Rating
5
P

Little Articulated Hermit Crab Buddy

Print in PETG, with supports and brim. DO NOT PRINT IN PLA, I am positive the links will break when you remove them from the plate if you do that.

Downloads
67
Likes
16
Rating
0
P
PrintablesMaster Gadget

HERMIT CRAB HOME

INFILL 20% SUPPORTS YES

Downloads
67
Likes
11
Rating
0
P
PrintablesDed Makar

Forest Hermit with Raven

Forest Hermit with Raven Category: Creatures

Downloads
63
Likes
11
Rating
0
P
PrintablesZac Saprun

BIQU HERMIT CRAB Enderwire/ Switchwire Mount

A 3D Printed mount for attaching a BIQU HERMIT CRAB tool-changer to an MGN12H linear rail. This mount is designed for an Ender 3 with a Voron Switchwire conversion (Ender-wire) but may also function on a regular Switchwire, although I…

Downloads
63
Likes
16
Rating
0
P
Printablesjbrian31

HeroMe Hermit Crab Bltouch gantry mount

This gantry adapter is specially for use for the biqu hermit crab using a bltouch. It solves the problem I found that you had to use 2 additional pieces to mount the bl touch and it would be far out to the left of the hot end. I found…

Downloads
59
Likes
10
Rating
0
P
Printablesminimal3dp

Hermit Crab Mount for Linear Rails

This is a mounting plate for a BIQU Hermit Crab with a Top Linear Rail Mount . I use this as part of my Ender 5 Plus to Mercury One.1 Conversion. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No…

Downloads
55
Likes
3
Rating
0
P
Printablesnp-dev

Giant Hermit Crab

A Giant Hermit Crab for your tabletop wargames and RPGs. If you like this free piece please take a second to check out our Tribe (https://www.myminifactory.com/users/nonPareil%20Institute?show=tribe#/) where you can get at least 20 assets…

Downloads
52
Likes
12
Rating
0
P
Printableszcohen

Hermit Crab Tool Plate Mount

This is a mount to hold the Biqu Hermit Crab Tool Plates. Can be mounted both horizontally or vertically with multiple mounting holes.

Downloads
51
Likes
13
Rating
5
P
PrintablesRa

Hermit Crab CAN electronics cover

Printed with Fuzzy skin effect.

Downloads
50
Likes
3
Rating
0
P
Printablesrepositor
18+

The source marked this model as adult content.

Downloads
49
Likes
12
Rating
0
P
Printablesminimal3dp

Hermit Crab Mounting Bracket for Top Mounted Linear Rails

I recently purchased a BIQU Hermit Crab and wanted to install it on my Ender 5 Plus. Here is a remixed bracket that I put together to allow me to install the Hermit Crab on my top-mounted linear rails. To install the bracket, you need 4 x…

Downloads
47
Likes
8
Rating
0
P
PrintablesZac Saprun

Direct Drive for MK8 & BIQU HERMIT CRAB

Edit: STL now includes hole for stepper motor … oops. A simple printed Direct drive conversion designed to fit a BIQU HERMIT CRAB tool-plate to a stock Creality Mk8 Hot-end and Ender 3 extruder assembly. It utilises the standard mounting…

Downloads
44
Likes
6
Rating
0
P
PrintablesAubrey Green

Minecraft Hermitcraft TCG health Counters

Hello all, I wanted to share on here a go at my rendering of a health counter used for the hermitcraft tcg. The counters encompass the total amount that any of the hermits can start or go down too all the way from 0300 and down to 0000. I…

Downloads
40
Likes
10
Rating
0
P
PrintablesBelBuilds

Giant Mutant Hermit Crab – Ocean Monster

From the depths emerges this terrifying Giant Mutant Hermit Crab , a monstrous sea creature sculpted with rich oceanic detail. Featuring a massive crushing claw, jagged legs, coral-encrusted shell, and expressive bulging eyes, this…

Downloads
37
Likes
8
Rating
0
P
PrintablesDavejr1979

Hermit crab for rat rig vcore3.1

Design Components: 1. EVA 3 adapter plate for Hermit Crab 2. Pass-thru belt grabbers 3. LGX Lite mounting plate 4. Rat Rig style Pinda mount (modified for this printhead) 6. EVA 3 compatible cooling duct assembly, stretched and clearanced…

Downloads
37
Likes
3
Rating
0
P
Printableszcohen

Hermit Crab Tool Plate Stand

This is a stand to work on Biqu Hermit Crab Tool Plates. Its a remix of my original tool plate mount. There is a tray in the front to hold parts. Its designed so that you can stop the print at the correct layer and install magnets in the…

Downloads
35
Likes
7
Rating
4.5
P
PrintablesRuger

Hermit Crab Shell Shack

Large dish for staring hermit crab shells to keep them from getting covered in sand. Approx. 220x127x51 Recommend using PETG due to the high humidity typically found in hermit crab tanks.

Downloads
34
Likes
16
Rating
0
P
Printablesminimal3dp

Hermit Crab Hotend for a BMG and Volcano Hotend

This is a printable (no support required) toolhead and duct to adapt a Volcano hotend to a BIQU Hermit Crab using a BMG extruder. This is compatible with the following: Volcano Hotend BMG Extruder 5015 blower 40mm fan BLTouch Use the left…

Downloads
31
Likes
2
Rating
0
P
Printablesmike2194

Hermit Crab 2 gantry mount for Herome7

gantry mount for HeroMe7 with BTT Hermit Crab 2 (CAN)

Downloads
31
Likes
3
Rating
0
P
PrintablesAubrey Green

Minecraft Hermitcraft TCG Deck Boxes

Here is a design for HCTCG deck boxes that correspond with each hermit type. The latch along with the two larger sides have icons from HCTCG that were made by another community member originally and then edited by myself. All files…

Downloads
31
Likes
13
Rating
0
P
PrintablesThe3DHobbyist

Biqu Hermit Crab Tool Plate Gridfinity Stand

As I gridfinitify myself to organize as much as possible. I wanted a better way to house the tool plates for my Biqu Hermitcrab. The already excellent model by zcohen was printed out and in use but I wanted to be able to have it attached…

Downloads
30
Likes
8
Rating
5
P
PrintablesDonBuco

Biqu Hermit Laser Mount

Mount on M3x6 screws and M3x6 inserts

Downloads
29
Likes
9
Rating
0
P
PrintablesRuger

Hermit Crab Water Dish Tray

Had one of the hermit crabs start to dig under my waterdishes and didn't want to collapse the tunnel when changing water. This tray is sized for two of the water dishes and has a bit of a lip around it to help keep sand out but also has a…

Downloads
27
Likes
9
Rating
0
P
PrintablesEngineer997

Hermit Crab Tool Plate to Micro Swiss NG

This is an adapter plate from the Hermit Crab Tool plate to the Micro Swiss NG REVO and Standard direct drive extruder. This uses the interface with the Hero Me gen 7 bed level sensor. This design requires 12 M3 heat set inserts and one…

Downloads
27
Likes
2
Rating
0
P
Printableshrafengrim

Hueforge the Hermit Tarot card

Project: the hermit.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 178.38x324.32mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness…

Downloads
26
Likes
7
Rating
0
P
PrintablesPeter Farell

Thermite Icon.

Thermite Icon.

Downloads
26
Likes
8
Rating
0
P
PrintablesRuger

Hermit Crab Sign

Wife wanted a sign to stick in the sand that read "No Crabby Attitudes" so i made her one. Made with Flashforge Burnt Titanium PETG for the base and Sunlu Mint Green PETG for the letters. The text was added in Orca (so you should be able…

Downloads
26
Likes
12
Rating
0
P
Printables3DNuki

Switchwire mount for Hermit crab

my personal remade of a minimalist hermitcrab mount for the voron SW. My print is in ASA, 0.24 layer heigh,20% cubic infill and 2 walls and supports for the rear “bridge” it should be pretty sturdy,i'm using a older version (without the…

Downloads
26
Likes
1
Rating
0
P
PrintablesSteve Oliver

BTT Hermit Crab 2 CAN cable support PG7

HERMIT CRAB 2 - CAN cable support and strain releif to use a standard PG7 Cable gland with integrated spiral cable protector. Ideally print in ABS or ASA for strength - I printed at 0.12 due to the threads but fairly sure other layer…

Downloads
25
Likes
2
Rating
0
P
PrintablesLordMacaroni

Hermit Caravan Crab

Lore: The Hermit Caravan Crab Origins: When the Great Flood drowned the coastal kingdoms, arcane energies seeped into the tide pools, mutating ordinary crustaceans into colossal scavengers. These creatures learned to survive by adopting…

Downloads
25
Likes
5
Rating
0
P
PrintablesRuger

Hermit Crab Dish (Small Treat)

Wanted a smaller single section dish to put treats out for the hermit crabs in addition to the multi section food dish. Can be placed in areas the large ones can't for foraging. Tend to put things like berries and things that will go bad…

Downloads
25
Likes
4
Rating
0
P
PrintablesRuger

Hermit Crab Supplement dish

A smaller 7 segment dish designed to hold supplements that hermit crabs need. Recommend printing with PETG due to the higher humidity that hermit crab enclosures tend to have.

Downloads
24
Likes
9
Rating
0
P
Printablesx121887x

SV03 Hermitcrab CAN plate

UPDATE: it fits the Biqu Hermitcrab CAN perfectly! A modification of the X-axis plate to hold a Biqu Hermitcrab CAN on my Sovol SV03. I outsourced the printing to JawsTec at the time, and everything seems to line up well. It should also…

Downloads
24
Likes
5
Rating
0
P
PrintablesStarForge

28mm Ancient Hermitaur Crab Creature with Detailed Claws and Segmented Shell StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
22
Likes
4
Rating
0
P
PrintablesStarForge

28mm Ancient Hermitaur Crab Creature with Detailed Claws and Segmented Shell StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
22
Likes
2
Rating
0
P
PrintablesPslice

Hermit Crab Cave

I printed on a Prusa MK4S with supports enabled

Downloads
21
Likes
7
Rating
0
P
PrintablesJason Smith

Hermit Crab Cap - Larger Holes

Staking Layers' design is great for covering over the exposed wires of the Hermit Crab V1 system from BIQU. I made the mounting holes a bit bigger for M3

Downloads
21
Likes
4
Rating
0
P
PrintablesTau

Ender 6 MGN12H mid-plate (eg BTT Hermit Crab 2 CAN)

Version2 has been updated. mid plate does not secure itself to any part. It simply gets clamped between the MGN12H block and the Hermit crab. Full range adjustment on the Hermits H2 slot holes. Modelled (but not remixed) with help from…

Downloads
20
Likes
2
Rating
0
P
PrintablesAubrey Green

Minecraft Hermitcraft TCG keychains

Here is my take of the Hermitcraft TCG item icons created into keychainsin part to share with the community at large as well as to let other strangers know about the Hermitcraft trading card game. Each of these where used with the…

Downloads
20
Likes
6
Rating
0
P
PrintablesSeamus Pitman

hermit crab slide

this is specifically designed for hermit crabs nothing else

Downloads
18
Likes
5
Rating
0
P
Printablestektalon

Lerdge ix x-axis belt fixing block modified for Hermit Crab 2

It can be direclty mounted to the back of the Biqu Hermit Crab 2 mounting blade on the linear rail. Direct drop in replacement, original screw can be used. Height was adjusted so the beld is in the right position. Please ignore the print…

Downloads
17
Likes
2
Rating
0
P
PrintablesTheBuilder443

Helldivers 2 Thermite Grenade Prop

This is the Thermite Grenade from Helldivers 2. Its main feature is that when the bottom part is twisted, the spikes extend and retract. Similar to the Thermite Grenade in Helldivers 2. There is also a Hatsune Miku and blank pin to…

Downloads
16
Likes
5
Rating
0

Hermit Crab 2 Linear Rail Adapter

The linear rail adapter that comes with the Hermit Crab 2 has the slots for the timing belt spaced too close together. This makes it necessary to replace the stock belt, which is way too tight. I was too impatient to wait for a new belt…

Downloads
15
Likes
3
Rating
0
P
PrintablesWrathernaut

Hermit Crab X-axis plate for Taz 6

Replacement X carriage for the Taz 6 to mount the hermit crab modular tool system. Eliminates the weak single-screw with a plastic wedge quick-toolchange system from the Taz 6 in favor of a thinner system that includes wiring and no tools…

Downloads
13
Likes
1
Rating
0
P
Printables3d guy

hermit crab hide

i have hermit crabs so i made a hide for them

Downloads
13
Likes
6
Rating
5
P
PrintablesLief Erikson

Xisumavoid's Tower Season 7 Hermitcraft

This is a filled solid export of Xisumavoid's Season 7 Main Tower bouth with and without the Ball ontop.

Downloads
11
Likes
2
Rating
0
P
PrintablesMegaman49

Hermit Crab Mount and Hermit Crab Apogee Remix

In my quest to finally stop upgrading the toolhead on my CR-6, I decided to install a Hermit Crab v2, that way if I have a problem I can just pop the toolhead off instead of disassembling everything in the enclosure or pulling the printer…

Downloads
10
Likes
1
Rating
0