Airbrush stencil ST-TX001-cracked-wall-paint-hobby-stencil
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
- Downloads
- 1,115
- Likes
- 225
- Rating
- 5
699 models
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Thin Hobby Xacto Knife Features compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces better threads for best…
The small parts organizer “Basic33” / VarioPlus Hobby 33 (old version with flat frontface) by Allit is often sold via supermarkets like Lidl as a Parkside product and Aldi and Hofer (Austria) as a Workzone product. They come with a very…
Hobby Xacto Knife with Blade Container Features blade container interchangeable handles compatible with no11 blade blade cover include Print Instructions be careful this is a very tight fit, your printer must be well calibrated the…
Retractable Xacto Knife Features compact with retractable blade compatible with no10 and no11 blade Print Instructions be careful this is a very tight fit, your printer must be well calibrated the classic perimeter generator produces…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Replacement cap to standard hobby knife. Print instructions Print cap upside down with side supports (painted on). Otherwise it may tip over or if you print it normal side up it is hard to remove the internal supports.
This is a replacement motor mount for the HobbyZone Apprentice S 2 1.2m RC plane. It is not an exact match for the original part due to some changes I made to strengthen it and make it print better, but it fits perfectly, and seems plenty…
A station and organizer that holds a complete set of Tamiya weathering Masters, four bottles of Tamiya panel accent, six brushes and a ink pen. Included are .stl, .3mf and two print files, one in PLA and other in PETG. Enjoy organizing.
A simple miter / crosscut guide for a hobby saw that uses 2x 8mm x 2mm magnets to hold the sawblade in alignment. You need to print one guide and 2 fences to make the tool. The fences are held on with M3x12mm button head screws with hex…
Parametric hobby horse holder based on a design from @Wejrice but since the one of the screw holes was off, I completely redid the model in OpenSCAD. I added a table clamp by 247generator which I extended by a bottom part, cleaned up and…
This is a replacement for the stock front landing gear support for HobbyZone Apprentice S 2 1.2m, but is not an exact copy of the original. This one should be a bit stronger than the stock one, fits well, and is a quick print. If you ever…
Hobby paint holder designed for Tamiya Paints 25.4 mm (1") square. This is to organize your paints.
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
This is a station/holder for Tamiya weathering masters and Tamiya panel line washes for scale models. It also hold six brushes. Included are .stl, .3mf and two print files, one in PLA and other in PETG. Enjoy organizing.
This is for this set. https://www.amazon.com/dp/B096VPVS9D?psc=1&ref=ppx_yo2ov_dt_b_product_details Would work for many others I'm sure. I used Avoid crossing perimeters just to make the wholes cleaner.
Yet another Hobby Knive Cap. The ones I tried did not fit the wider blades I often use, so I decided to design this one. The wider shape also prevents the knive from rolling of the table. Print parameters: PETG layerhight 0,3mm print…
I have a set of small carving knives purchased in Japan many years ago. The set came with flimsy little plastic sheaths for the blades, but to be honest these were so thin that they added no safety. Knives stored in a tool bag were always…
Bac de récupération pour machine PFAFF hobbylock 756 Largeur 100mm Hauteur 80mm Profondeur 50mm Impression : Matière : PLA Hauteur de couche : 0.28mm Murs : 2 Remplissage : 15%
This collection will be updated with new models from time to time! Ideas and suggestions on sizes and features are welcome! For full collection and editable STEP files, please purchase the full pack from here: Full Pack Download Modular…
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
Compact hobby knife with hidden storage. storage for blades cover cap keychain size Section analysis: UPD: Add file “Standart size handle.stl”
Hobby Tool Holders This is an initial set of compact hobby tool holders the purpose of which are: Short term tool storage for tools being used on an active project Organization to help keep the bench cleaner To help facilitate rapid tool…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Newer Version Available https://makerworld.com/en/models/1187363-minivice-x2-series-modular-mini-painting-handle#profileId-1198569 Made many improvements. Leaving this version up as its still useful and works well. Newer version is more…
I've been thinking of making a better utility knife until I came across @PaskMakes knife he made out of brass, I used his stencil in fusion_360 and 3d_printed my own version. Print instructions you will need x1 slandered utility knife…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
After searching online I came across some poly resin forceps that I wanted to print and was surprised to find that there weren't any that were properly modeled. This has been tested on a .4mm and .6mm nozzle and prints under 20mins on my…
Designed to fit #11 HOBBY / XACTO type blades. ***XACTO BRAND SPECIFIC DESIGNS JUST ADDED BE SURE TO CHECK YOUR BLADE MEASUREMENTS FOR THE PROPER FILES*** No supports needed. No hardware needed. Recommend printing at 0.1mm or 0.08mm when…
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
A battery tray to securely hold the stock battery (Spektrum S3 2200mAh) in the battery compartment of the Carbon Cub S2 1.3m RC airplane.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This is a 3d printable propeller for the Hobbyzone Sport Cub S V2. I find the plane going faster with my propeller than with the stock one. Print settings: No supports 0.10 layer height (Brim)
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
v2 Update Added anti-roll flange, which also doubles as a flat surface for those who want to print this sideways. The updated design accommodates #17 chiseling blades. ___ Yet another hobby knife safety cap. Unsatisfied with the available…
Multiboard Holder for your Pen, Knife, Sharpie or Pencil. This prints perfectly without any type of support. I designed this to be right in the sweet spot so it can be used for multiple items. The opening is 11mm wide. The unit is 45mm…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Background I had a look around at the different holders that are out there. And even though some had some good ideas I felt none of them solve the problem for me. So I created this remix based on 2 holders and added my own ideas. There…
Perfect for the man cave/hobby room! There are 4 versions, 2 with holes in the corners, 2 without holes and with different fonts. Measures 18 x 11 x 3.3cm
Trays were designed to with this hobby knife kit in mind. Just like the original model this was inspired from you need magnetic strip like this . Printed on an MK3s with 0.6mm nozzle 10% infill and 0.3mm layers
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This 1x1 gridfinity block holds a pair of side cutters, a hobby knife, and angled tip tweezers.
I am working on a gearbox for 3v hobby motors, and needed a model of those motors to design around so I made this one. I worked with the drawing from here , which is partial and may not represent all variants of all manufacturers. I did…
Second of the modular paint racks to store and organize hobby paints. This one is an inside 90 degree corner to help with wrapping around your work station. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding…
Use case This versatile combination of angles and thumb screws can hold almost any oddly shaped part that needs some work on. The original idea was to hold loose AA batteries to weld the contacts to them. Try that without a frame, it will…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This holder is great for tweezers, pin vise, small screwdrivers, toothpicks, finger cots, rodico, springbar tool, hand press tool, oilers, spudgers, etc. It has a small bin in the front for tools or parts that are in use. Great for…
Designed this Gridfinity tray to store the four knife handles I have as well as extra blades held on a .5 inch X .062 magnetic strip. Space on either side of the magnet strip is angled to allow you to push a blade down from either end for…
This is the first in a line of modular paint racks to store and organize hobby paints. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to hold paints such as Miniataire, GW and others!…
Remix of standard servo mount to allow lego compatible pieces to fit on standard yellow DC TT hobby motor with gearbox. Good for hobbiest robotics projects. I use it in my High School robotics class to connect the microbit/raspberri pi to…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
This is a stand for the cheap hobby style glue guns. The stands I could find on Thingiverse were all for more expensive kinds, this one is for the kind sold in craft stores and on internet auction sites. See picture. Prints without…
A stackable, wall mountable, modular rack for hobby paints similar in size to Army Painter and Vallejo paints.
Ein Scale Batterie Gehäuse für den Power Button eines Hobbywing Fusion. So könnt ihr den Schalter als Autobatterie tarnen. An einer Seite bleibt der Schalter entweder offen, oder ihr klemmt das Rückteile in die Öffnung wo das Kabel raus…
Third of the modular paint racks to store and organize hobby paints. This one is a smaller straight section. It is half the size of the large straight section. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be…
Flower hackamore shanks for hobby horses
These units are made to stack on each other allowing for very efficient storage of (exact, pen knife) hobby knife storage Note: Add strip magnets to the blade holder to hold the blades in place. Ex: https://amzn.to/3woBb6U
Holds two hobby knifes (Diameter 8mm) and a box of replacement blades.
ENGLISH description: 5V DC motor pump used in automatic plant Arduino watering systems. I have used this design to make my School project easier. Pump is using 1cm of diameter tube for water and 3screws with nuts for holding the pump…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Hobby knife with a finger loop for more precise and delicate tasks. It was inspired by one I saw on Amazon but designed it from scratch/remixed it from the Inexacto Hobby Knife. Print the modified sleeve if the blade is too loose. It's…
When I upgraded my TRX-4 ESC to a Hobbywing 1080, I found several mounting plates, but none had an external lever switch like I had been using with the original Traxxas ESC. I've combined Puredeath's excellent TRX switch(…
Organizer for holding two bottles of Micro Sol and Micro Set. Also hold two Tamiya type square bottles. Holds two Tamiya tweezers, two scalpel handles, two brushes and Tamiya decal scissors or equivalent.
Replacement Propellerblade for Hobbyking Warbirds Motivation: Hobbyking has/had a lot of great RC PNF Warbirds, but sadly they and their replacement parts are out of stock. Because of that, my bird (P51 Mustang) and the ones of my friends…
A 1×1 Gridfinity tool holder for a Silverline 248844 Deburring Tool , 5 spare tips, an OLFA AK-1 Hobby Knife and a set of OLFA KB spare blades box . This model should also fit your standard X-Acto blade knife and other deburring tools.…
Organizer for scale modeling painting. Holds Tamiya bottles, Mr. Hobby brush cleaner bottle and all kinds of brushes and scissors.
I designed this hobby knife to have a small handle so that it is easy to print and I would not be able to put that much force behind the blade. Nice thing I like is if I break it or lose it I will be able to print another one. Print…
Scale battery for hiding your Hobbywing Fusion start button. You can hide it in plain sight. If you want. I printed the moving part with resinprinter and medium transparent resin. The button led still faintly shows. But if you dont mind…
Mount for the Hobbywing Max10 SCT within a Traxxas Rally/Slash with a LCG chassis. There's a cutout for the temp sensor as well as it's pretty close. You'll need one M3x8mm and M3x12mm for mounting. The ESC and switch should friction…
This is a re-upload of the Megami Device Chassis files made by PoofybirdDesign but were unfortunately deleted at some point. I have not personally made these files, so I cannot answer any questions on them, I am just trying to make them…
In 1995 Aster Hobby made a beautiful gauge 1 (1:32) live steam model of a German Preusian Railways (K.P.E.V.) T3 / Deutsche Reichsbahn 89 7462 ( http://www.southernsteamtrains.com/akpevt3br89.htm ) When upgrading this model…
Holder for Mr Hobby / Color Glue Bottles Print instructions Category: Art Tools Summary Holder for Mr Hobby / Color Glue Bottles Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Infill: 10%
Hex design Toolstand V1 for 7 RC / Hobby Tools / screwdriver with parts tray. If you like my designs and if you want you can support my hobby by clicking the links below and maybe you want to buy some tools for this tray. Please don't…
I was looking for a Fiskars hobby knife holder for #gridfinity but couldn't find one. So I remixed kaspertulstrup's x-acto knife holder to fit the bigger Fiskars version. Gridfinity is the ultimate organizer for your whole workshop! Zack…
I liked the honeycomb desing from the remix on Thingiverse, but i wanted to use M3 screws. They are like 1mm out of the side walls because the walls are 3mm thic The differences with the remix design are: Smaller screw holes to fit M3…
OMPHOBBY M2 EVO CANOPY OMP HOBBY M2 EVO CANOPY
Drop chute,cargo door suitable for a RC Bushmule from Hobbyking (Avios). The Bushmule has a cargo door built in as standard. I did not like this design and I have designed a new one This one fits exactly into the hole from the cargo door.…
This bracket allows for a snug press fit to the hobby servo MG996R Print instructions Category: R/C Vehicles
Why? I didn't like the usual adapters that mount the ESC to the floor of the central chassis, because you always have to angle it upwards. In hard crashes it wobbled around. Additionally I needed the space in the central chassis pit to…
Sixth of the modular paint racks to store and organize hobby paints. This one is a smaller straight section that is for wall hanging. I designed this to hold Vallejo or Reaper dropper paint bottles. I will be adding more shelf layouts to…
This is a mount for a Hobbywing QuicRun 10BL120G2 ESC to be mounted in the stock ESC mounting holes for the Arrma Gorgon. Using the Stock mounting holes for the ESC this mount will allow the Hobbywing QuicRun 10BL120G2 to mount into the…
Use this model to create your own robots/projects using the Hobby Motor with Encoder available from sparkfun: Plastic Gear: https://www.sparkfun.com/products/24053 Metal Gear: https://www.sparkfun.com/products/16413
The 10ml bottle holder will fit within the Gridfinity grid. One has a 3mm base that fits with some of the other things I have made. The other has a thin base to save on material when printing
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Modular Hobby Tool Rack Original source This is a tool holder based on the Modular Hobby Paint Rack - Small Straight . There already was a tool holder for this line of paint racks. but it did not fit in the sides with the regular paint…
Hey. I made this V8 engine cover to hide my Fusion in the engine bay. Thats an V8 with Intercooler. Not that scale version of an real life engine. But i think it looks good. I printed with support. And used some wires for the plugs and…