Sprocket guard CRF Honda
Sprocket protection compatible with 250 CRF and CRF RX 2019 -2021 Original reference: 23810K95A20 Print in PETG, TPU, ASA 100% infill with backing
- Downloads
- 741
- Likes
- 55
- Rating
- 0
1,586 models
Sprocket protection compatible with 250 CRF and CRF RX 2019 -2021 Original reference: 23810K95A20 Print in PETG, TPU, ASA 100% infill with backing
The Door Handle Door Lock Rod Clip on my 1998 Honda Accord, this clip does the job as a replacement part. Tested on the front doors only so far, right and left doors need a mirror version but I've found the non-mirrored version also…
Remix of dMosher's design “ Larger Console Tray for Honda Pilot or Ridgeline ”, with minor improvements. This should be compatible with the following vehicles that use “Base Tray” part number 83407-TG7-A01 or 83407-TG7-A02: 2016-2022…
Recommended print settings: Layer Height: 0.2 mm or less Infill % : 50+ Supports: Yes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Material: PLA or PETG Raft: Optional Brim: Optional Two of these parts are…
Wall Art silhouette of the Honda Civic Type R FK8. Adjustable size. I accept model suggestions or ideas you have.
Honda Civic EK/EJ (96-00) typeR rear lip holder Printer: JGAurora A5S Rafts: No Supports: No Resolution: 0.4mm nozzle, 0.20mm layer height Perimeters: 6 Infill: 30% Filament material: PLA Notes: On the edges behind the wheels I added it…
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
Honda/Acura Clutch Alignment Tool B-Series Engines B16/B20/B18
Mir fehlte einen Griff für meinen Honda GX270 Motor. Ich habe von meinem Ersatzmotor den griff nachmodelliert und für das Drucken angepasst. Gedruckt wurde aus ASA, liegend und mit 4 Randschichten. Support wird benötigt, kann allerdings…
The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Retaining pin for the cubby door in 2017 or newer Honda Ridgelines 71509-SZA-A01 Also fits the Honda Talon Air Cleaner Outer Cover - (thanks @JustSomeEngineer !) : Recommended Print Settings Print Orientation: Default as modeled Material:…
Stripped nut replacement for Honda ATV Choke cable Nut (Under choke puller on handlebar). Insertable nut, to avoid having to remove the whole choke cable. You can also insert the small threaded part an glue it to make the nut complete. V1…
Multi-color 1:20 scale model of the classic Honda Dax moped in a credit card sized kit. Second in my motorcycle kitcard collection. Feedback highly appreciated. Recommended print settings: -PLA -0.4mm nozzle -0.16 layer height -No…
Update 25.05.2024: Added version for 4-color multicolor print (AMS & MMU). Edit: Fixed error in 3MF-file. Summary It is a model of a Honda Civic Type R (EK9) in a kit / gift card style. Some characteristic details can be discovered.…
My Honda Lovers who like to have their emblem in different colors, here is your way of doing that through a 3D printer. There are two ways to print this out. There is a “H”, “Square”, and the “Back Plate” if you wanted to have them in…
Honda car brand keychain, with a simple and easy design for a quick impression and low material cost. For daily use, it's better to modify the keychain scale to 70 or 80% to make it more comfortable and less bulky.
Summary This is a model of a Honda NSX / Acura NSX (Gen 1 / NA1) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhausts :) After printing, the model can be assembled with the help of…
Summary This is a model of a Honda Integra Type R DC2 (JDM) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate spoiler and big exhaust :) After printing, the model can be assembled with the…
Honda keychain made in Fusion 360.
Modelos diseñados para imprimirse en 2 colores en diferentes capas. Este modelo tiene una altura de 5.28mm, el color base consta de 20capas que es un equivalente a 4.4mm y el segundo color consta de 4capas equivalente a 0.88mm, teniendo…
Summary This is a model of a Honda Civic EF SI (EF9) in a kit / gift card style. Some characteristic details can be discovered. Equipped with separate exhaust :) After printing, the model can be assembled with the help of integrated…
Honda brand keychain, with a simple and easy design for a quick impression and low material cost.
Imported from Thingiverse: https://www.thingiverse.com/thing:2624256 Honda Keychain Category: Keychains
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Honda Ridgeline (and Pilot) has a recessed cubby in the center of the dashboard that has limited use. This insert tray/drawer slides snugly into the cubby - flush with the dash - providing secure and out-of-sight storage for valuables and…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Honda Civic Type R. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Material: Pet-G or ASA 275 or ABS
Printing is easy. Small support is needed for the logo stubs. Default base size is 120x50mm and the total weight 36g at 10%base infill and 15% logo infill.
Includes STL and Bambu 3MF file.
Maqueta del mitico McLaren Honda MP4-4 de 1988 con el que Ayrton Senna ganó su primer mundial de Formula 1.
I made these on my Mini Prusa +. They take about 7 hours to make each. They are about 7" in diameter and 0.300" thick. The Yamaha sprocket will need supports for the name. I will be working on others and will be doing a clock one as well.…
This is a extender for oil draining on a Honda snowblower with belts. -One model is made for 2009 HS970 with belts. This is the type with the “tongue” under the drain plug. You need to add support on the “wings”. The 18cm one fits…
Model of a B-Series VTEC valve cover, not much else to say. The model will probably load way far away from the build plate for some reason, just right click and select auto arrange models if you are using cura. Resize the model to however…
This key has been tested on the following models and years: 2007 Civic 2009 Civic 2nd gen Honda Fit 2014 Odyssey It will likely work on all 8th generation Civics which run from 2006-2011. If you have success for a year not listed, please…
STL/Bambu 3MF included.
This part prints with PETG better than PLA but both will work. PETG seems to stick to the build plate better. You will need 5ea 2-56 Socket Head Cap Screw 3/8" long. It also reuses the screw from the old case but it will not hold the case…
Wanted a logo for my vintage motorcycle. there's a few available on the web, but for some reason they are pretty pricy for such a small piece. Print is a tad thick, but I liked the extra 3D dimension. Printed using PETG (or better) so it…
These caps are on my (winter tyre) rims for almost 5 years now. I also added the Fusion 360 file in case you need to adjust it to match your rims.
My car has a very small space under the oil cap opening. Regular funnels did not seat straight without holding. The lower diameter of the funnel is 30mm which fits perfectly. The walls are 1.2mm which allows for both 0.4 and 0.6 nozzles.…
Update 16 Aug 2020: Uploaded missing STL of the Button Cover. Thank you to Saplyng for pointing that out! When both my Accord's key housing's broke I began trying replacement designs, but the ones I found online didn't seem to hold up,…
Refrigerator magnet. Requires 2 x 20x6x2mm magnet. It has two versions, one with cutouts for magnets and the other without so that it can be modified for other magnet sizes.
Honda Classic - Keychain - Portachiavi - Porte-clés - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their…
For more exclusive esigns or If you want to sell this print, get commercial license via patreon https://www.patreon.com/c/Artemix796 Stand Brake Disc Lamp – Honda Type R This is a decorative stand lamp inspired by the iconic brake disc…
Keyring with Honda logo on it. I printed it with 0.2 mm layer, 100 % infill.
Please don’t forget to like the model here on printables if you enjoy it! This is a 1:15 scale model of the 2025 Honda CB650R, meant to be printed in pieces and assembled without using glue (With the exception of second color for the…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Flexible cup/drawer lining to take advantadge of the fuel cap compartment space on the Honda ADV 350 Made in FilaFlex30, 0,2.
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge. I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them: 2x M3 - 5mm Threaded inserts 2x M3 - 6'ish mm Bolts…
Beer cans mug, make your own design suitable for 500ml cans incl. 250ml adapter for energy cans Print Settings Printer: DIY Sidewinder X1 Rafts: No Supports: No Resolution: 0.16 Infill: 5% Filament: SILK PLA
Exact replica of a Honda logo. This was created with the Hondafont. While printing I had some problems with warping of the protrusions of the letters, I solved this by reducing the print speed to 50mm/s. I had good results with EcoPla…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l.
Honda CBR brand keychain, with a simple and easy design for a quick impression and low material cost.
Honda/Acura B-Series Cam Lock Tool for B16/ B18 vtec tolerances are very tight might have to put a little force in to get in between Or use a debur tool to trim a little
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
I recently got a very low mileage 1999 Civic... after a lot of searching there was no design to be found so i drew my own and now i'm willing to share it. Speakers used were JBL Stage 602E and i'm pretty sure others will fit too with a…
I modified an existing Honda door rod clip design (shout out to @akf_was_here ) to work on my 2004 Accord. I made the clips just a little more robust to help avoid snapping upon installation, made the hole a tad bigger, and scaled all…
This 3D printed RC car shell meticulously replicates the iconic Honda NSX '98, offering versatility for printing with both FDM and resin technologies. It is designed to cater to the preferences of RC car enthusiasts who value precision…
I have a 1999 Honda Crv, one night as i was walking away from the vehicle i noticed my lights were on. i walk back thinking ‘i may have left my lights on’ ( this car dose not have any type of auto lights). i open the door i make sure the…
This part of the car is no longer available in the market as it is an old model. So i decided to design it from scratch only the upper part without the open-close knob. On one side, where it had the 3 metal clips, I converted it so that…
Coasters for the honda fan! Prints in separate pieces. I suggest printing the base upside down on a satin or textured sheet to get a nice surface finish. Coaster Holder : https://www.printables.com/model/455738-coaster-holder
A motorcycle kick stand pad for your Honda. When you need to park on dirt, put this down and put your kickstand on it. This will keep your kickstand from sinking into the dirt and dumping your new bike. Print this with plenty of infill,…
Emblem for 1996-2000 HONDA CIVIC Category: Automotive
Welcome to The Low Poly Auto Show! This is a low-poly 2019 Honda Civic Type-R. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size,…
I've tried all the other 05 Pilot key fob designs I could find on here, but they've all broken on me. My biggest complaint was that none utilized the 2mm threaded hole in the key "blade" to secure it. My design requires more hardware, but…
Remix of the ‘Honda keychain model by Jakub Dvořák’ Slightly thickened up the Keychain Loop by Reduced the opening to 3.5mm (If printed at 100% - But I recommend scaling up) Model is quite small but, I have scalled up in slicer to several…
A keychain with japanese Honda text.
Side molding clip for an EF Civic, possibly CRX or other models from the 86 era. Layer size: (0.15-0.1) Material: ABS Supports: Yes
Is your Honda too slow to impress your friends? EASY FIX FOR YOU!!! Put this badge onto it and get 5% more power. It is the simpliest and cheapest way to increase your cars HP. Please consider supporting me by downloading this model for 1…
A new lamp from me, this time a Honda Moto lamp. As always with all new models from me, an additional USB-C port from AliExpress is needed:…
Left Headlight Duct 3d .STL model for Honda CIvic EJ/EK (facelift version: '98-'00). Deigned specifically for K-Swapped cars with air filter on left side. Mounting holes to be drilled upon fitment. Package includes: -Entire headlight as a…
Originally designed by krashkropp on Thingiverse. https://www.thingiverse.com/thing:4457584 I redesigned to fit perfect for 01-05 civic I printed with PETG. It works. PLA will crack or deform due to tempreture.
Took a model I had from a first gen and modified it to work in a 2nd gen CRV. Model has “CR-V” in the center that can be colored if you have a multi color printer.
I really like Vtec motors and I was needing a new key holder so a made this :D I already test in PLA and PETG Infill: 20% No supports Layer: 0,4mm #TopSolid7
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
keychain & logo for Honda Motorcycles
If you've lost the cover for your Honda, try this one. After a few tries, this model fits perfectly on my bumper. You can print it in the color you like the most. I also added a small central ring to secure a cord in case it comes loose,…
ENG Horn cover for Honda Monkey/DAX/MSX/GROM 125 I recommend printing from a more durable material I recommend printing with supports I will add more over time CZ Krytka klaksonu pro Hondu Monkey/DAX/MSX/GROM 125 Doporučuji tisk z…
I wanted a backrest for my Element, but I wanted a more inexpensive option. So what better option than to make it myself? Here's the parts list. ¾" electrical conduit.…
34mm x 32mm 6mm keyring hole 4.8mm tall (4mm base and .8mm color switch)
Created for my 2012 Honda Odyssey, but other years have same key (2011,2012, 2013, 2014). Original screw version doesn't need supports. Supports make the alternate a little cleaner, but not fully needed. Blue key has alternate screw,…
Repair Lock Pin for Honda Transalp Fairing - kit perni per riparazione carene Transalp Overall dimension: Ø20x62mm Ø17x33mm Filaments: ABS - ASA - PLA+ - PETG Resize to adjust dimension If you download/enjoyed this file, please leave a…
Honda CRV RD1 Fender Flare Clip Category: Automotive
Sun visor clip for when you evidently break yours. Will fit 2008 model, and possibly more. Print with ABS or other strong and heat resistant polymer. UV degradation shouldn't be a concern. Print with dense infill since it needs to flex…
Designed for my 1997 crv. could work with others. sits in the rear light trim and is doublestick taped in. (3m foam tape) Changelog: V2: added a little strip at the bottom for better fit. Print Settings Printer Brand: Prusa Printer: I3…
Easy to print hitch cover. Printing PETG or better No Supports Orient with face up Suggest using Brim to help with bed adhesion Can pause the print to change the color of the design