Laser ILCA Sailing Dinghy Boat
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
- Downloads
- 474
- Likes
- 39
- Rating
- 5
339 models
This was designed as a greetings card but also suitable as a decoration or fridge magnet. The photo shows it printed using a generic white PLA bought from the Prusa shop.
This is a hot shoe cover optimized for the Multi-Interface Shoe that is being used on the Sony ILCE-7RM3 camera. Its probably also fits on any other of their cameras as well though. This model is designed to be printed standing upright…
This little piece slides into the flash socket on the Sony A6000 or A6500 cameras to hold the flash so it points up as shown in the photo. This allows the flash to bounce off the ceiling instead of hitting the subject directly. A bounced…
Toller Aufsatz zum tropffreien Ausschenken aus einer Metrox oder Benta 2 Liter Milchkanne. In den Deckel für den Ausguss passt ein Gummi-O-Ring 31.34mm x 3.52mm, den man im Baumarkt im Sanitärbereich kaufen kann. Ich empfehle, mit ABS-X…
Railcar bogie, model 18-100. Used for most soviet/russian railcars from 1960s till now. Print instructions Three variants of crossbar included: without mounting hole, with one, and full variant with hole and sliders. Real bogie always…
this can help a litle (i added wilcox mount holder because the one what is in first file is bad so it cannot be moved up and down but can
finden Sie es nich auch total langweilig, die Milch wie jeder normale aus dem Tetrapak in den Kaffee oder das Müsli zu kippen? dann drucken sie sich ihren Kuheuter Ausgießer damit es sich anfühlt, die milch direkt aus den Zitzen der Natur…
You will find different versions in different heights. I have only printed the 6U versions. If you have wishes for other versions, write me a PM or a comment.
Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8
Slim fitting 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
It is heartbreaking to snap off the mast removing supports so I have sadly had to make the mainsheet very thick and fillet the base of the mast. Don't print it small if using supports. I have added an unassembled version. When I started…
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
The common railcleaner is too small, the cleaning lok is expensive, so I designed a cleaer for a kitchen sponge, cutted
Slim fitting 2-slot wide MLOK rail cover with a hexagonal textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
This is a ILCA Dinghy Traveller Wear Protector. It protects the gelcoat from your ILCA or Laser Dinghy from being damaged when you pull your traveller really hard while hiking.
wings added from: https://www.printables.com/de/model/110583-desktophero3d-wings
Configurations for : Extrudr PLA NX-2 (works with allmost every PLA) Prusa PETG (or any other but keep an Eye on the Temperatur settings your using) Extruder TPU A97 (Medium) Fiberlogy ASA Fiberlogy Easy ABS Extrudr PETG Fiberlogy Easy…
Having used the previous version for some time I decided it would be a good time to revisit its design. Taking into account feedback, my own and user experience I've added some quality of life features and updated the way the box is…
Automotorul CFPV. S-au fabricat 3 exemplare, la Astra Arad, inainte de al doilea razboi mondial, pentru o linie particulara de cale ferata din Romania. Si anume Caile Ferate Prahova Valeni (CFPV). Pentru utilizare comerciala sau va rog sa…
This model is compatible with the lego system.
This was just a short and fun project I designed and built for my Dad. While the model is more or less a Ford Model T it is not exact and not to any particular scale. This model is about 150mm long and is designed to fit a track with 36mm…
You need an m5 bolt and nut
The stl is used for the bed model in PrusaSlicer.and is installed int the Printer Settings tab, Bed Shape Model dialog. Load the stl .file Normally the stls are in the PrusaSlicer\resources\models. The Overlay or what Prusa calls Texture…
G-Scale 1:29 20 Axle Schnabel Railcar with Load Deck & Tank Load - I'm not very good at writing directions but everything should be self-explanatory on how it goes together! I used ¾" x 1 ½" white PVC water pipe to glue the two large…
The motor is Mabuchi 010. Also you need M2 screws with nuts. Un automotor pe care sa il poata tipari 3D toti pasionatii din Romania. Daca aveti planuri de la locomotive romanesti va rog sa mi le trimiteti la [email protected] pentru a…
Compatibility This shell is intended to work with this PCB from AliExpress . If the link is unavailable (non-affiliated), do a search for “FC 3.5 inch screen”. Printing You can print all of these supportless with the largest flat surface…
larger sized mod co-created with caregiver for an elderly person. Screw added for stability.
Model require two screws M4x16 or M4tx16 to mount to Spuhr optics mount. supports required
Cage for SONY α6500, protect the camera, improve handling, but do not use it as a professional metal cage. You can buy a screw as the picture shows to install the cage or you can dig a hole on the model by yourself to adapt your own…
Contoured 2-slot wide MLOK rail cover with a diamond textured grip pattern. Requires M5 MLOK mounting hardware with countersunk heads. This is the hardware I used:…
A simple box for desicant material, i've put it in an old cigar humidor converted in filament dryier box. Printed in Pla with Cura 5.6.0. slicer. Printer Ender 3.
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my second attempt at creating a vehicle. I used it to learn Fusion360. Car is armed with six machine guns. It is self propelled…
This Core XY design is based on the Open Source RailCore II project ( https://RailCore.org ) with a number of modifications, including: 2020 Extrusions (1515 is standard) Aluminum Bottom Plate Billet corner bracing Billet X Carriages…
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
Don't want to pay for a 70$ HVA key ? Print the cover and use it on a blank key. — I retro-enginered the 701 key from Husqvarna because I destroy a key into my motorcycle. This model isn't 100% close to the original key because some curve…
An elegant pencilcase with a magnetic closing mechanism. You will need 8 magnets 2x6mm und 2 M3x16mm screws. You will need support for the hinges of the bottom.
Had the Idea to mount a VR headset using an NVG mount for years and finally got around to implementing it. While the end result is functional, the massively increased weight makes it rather impractical as it is quite front heavy, even…
My printer is small and needs to be attached on the left side, so I reduced the spacing and adjusted the size.
Дисплей і роз'єм живлення запаювати так як на фото v1-2 Друкувати з підтримками Файли *_printable містять додаткові підтримки Зверніть увагу на мости на нижній деталі - вони повинні бути вздовж корпусу Поредагувати можна тут upd…
Silco - League of Legends Wall Decor
WWII German Armored railcar. Used to defend railroads from partisans. Intended for 1/100 scale gaming. This is my first attempt at creating a vehicle. I used it to learn Fusion360. Many thanks to TigerAce1945 for allowing me to use his…
It's a spare part used in ILCA/LASER sailing boat class.
The lockclips on Bosch cases happen to break after years of use. Therefore I needed a replacement lock for the case of the Bosch SDS Drill. The lock could be used for other things too of course. Created with OnShape…
Milchschlauchhalter für die Jura E8 Die elegante Lösung Mich hat es gestört das der Milchschlauch unserer Jura irgendwo in der Schublade rum liegt deshalb habe ich diese Halterung entworfen. Sie passt in den vorhandenen Spalt an der E8…
Einfacher Stand für einen Milchaufschäumer Besteht aus 2 Teilen die einfach ineinander geschoben werden. Support benötigt nur auf Druckplatte. Vor dem Zusammenbauen Führung und Schiene etwas mit Sandpapier abschleifen!
Leider ist der Originaldeckel meiner Kaffeemaschine schon so deformiert, dass er nicht mehr richtig schließt. Der Ersatz ist bis 70°C getestet, spülmaschinenfest. Material TPU95 Layerhöhe 0,2 mm Infill 25 % Support 0% TPU A95 von 3DJake…
Pencilcase / Portable Desktop Organizer For pens up to 17cm
einfacher, schnell zu druckender Flaschenhalter zum trocknen von Milchflaschen Innendurchmesser Flaschenhals: 35mm simple and fast printable stand for drying of milk bottles inner diameter of bottleneck: 35mm
Made this holder to hold the wire handle so to does not fall into the pot of melted wax. There are multiple indents to place the handle in. I would recommend to print it in PETG. Printed on the side without support.
Replacement handle and knob for Philco Black Gourmet Air Fryer - Model PFR15 . This is my first model, not perfect but fit por purpose. Feel free to modify and improve it as you please.
TailClippy - the suspender style clip that grips! Print out of NYLON at 0.08mm layer height. assemble with filament
I wanted magnets built into the tailcap of my BLF LT1 so I can stick it to surfaces, and I didn't want to have to carry around one of those tripod-thread magnets. This adapter holds six of these magnets inside the tailcap, and they're…
Dieseltriebwagen or diesel multiple unit for wooden railways compatible to BRIO, IKEA, etc. Required parts (per wagon): 3x M2x16mm (total 6x) 1x M2x10mm (total 2x) 1x Ø 6mm x 3mm magnet (total 2x) Building instructions Assemble 4 wheels…
Support for the remote control from the Britania / Philco ceiling fan.
I designed this stand for the Bonsenkitchen milk frother as a gift for a friend. The stand might also fit similar devices. For reference, the Bonsenkitchen milk frother's housing has an oval profile measuring 35 x 27.5 mm, tapering over…
Update 21Sep2023: I've updated the model with V3, after about a year or so I had a failure. V3 is vastly strengthened and should work for much longer. This is a mount for the Bondtech LGX with a mosquito attached for the Railcore. It is…
A model of the Eureka from Space Quest 5. The Eureka was a Hoover Class Garbage Scow captained by the player character Roger Wilco. Follow me if you would like to stay notified about all my future designs. Find more of my designs at Cults…
I made a collection of coasters of malevolent corporation logos from my favorite shows and movies. Or at least the ones I that would work in 2 colors on a round disc. Each coaster is 100mm in diameter. Color change is via filament swap.…
I've included a STEP file of the whole assembly for your reference For more info go to Smart Orbiter V3 Extruder: https://www.orbiterprojects.com/so3/ Euclid Probe: https://euclidprobe.github.io/ Cheers and happy printing! __Yves
This cookie cutter my mom needed for a cake. It is 1.5" wide and took me 35 min. on 100% infill. I use a website called Cookiecad and it 3D models the cutters for me so. Heres the link - Cookiecad
Ersatz für den filigranen Verschluss Stopfen für den Milchschlauch am Aufschäumer der Jura E6. Passt Möglicherweise auch an anderen Modellen. Category: Kitchen & Dining
Use this model as a fun project for kids or as part of a STEM activity. Have students design their own sails and try different mast positions to experiment with performance and stability. Check the second photo for parts. Axles are 2mm…
The load is designed to nicely fit a open car with a 15x48mm loading surface. 3D PRINTING SETTINGS Layer height: 0.2mm Infill: 10% *07-02-2024: I reoriented the stl file in order to make sure it is imported with the right orrientation.
Adapter for mounting the PNV-57 NVGs to the Wilcox G24 helmet mount. It was designed in Inventor and should be easily modifiable. Made to be used for playing airsoft. Uploaded simplified version if you have printing problems or want the…
The same box as the original but with a divider in the middle.
I designed a squash ball foot mod for the RailCore II 300ZL based on the original files. Note: Squash ball will feel a little tight when putting them into the feet, just squeeze and rotate. Amazon: 4 x Squash Balls used -…
Cleaning the milk frother adapter is not so easy, so I wanted to have replacements. Use a material which can resist the heat of the water vapor! Especially for the inner part! My first prints were using PLA which is not suitable! Print…
Protector for your ILCA/Laser traveller. This goes around the corners of your traveller hardware so it protects both the pulley and the GelCoat of the boat. Print it in an UV resistant filament so it does not breaks in the first 5 minutes…
Make it your own, choose the colours that suit you. There are several files in different versions that allow you to decide how you want to print the model, depending on your hardware. Scale to the desired size. You can take the simple…
I sold my 2003 VW T4 California Freestyle and I am cleaning up the designs I made over the years. This cover fits in the rails of the living area, to prevent hurting your toes when there is no carpet there. Unfortunately I don't have any…
It is a very simple model specially created for an easy and practical way to print, so you can try do it in the way it best suit's you
Just a simple stand I made. It needs no gluing. The upper hole is 30mm width and the lower hole has a width of 17mm. The space between the head and the food of the stand is 170mm. Print Settings Printer Brand: Sovol Printer: SV04 Rafts:…
Milschäumeraufsatz gegen Spritzer
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
The Milk Frother I got from Amazon (CAVN) had no way to put it anywhere. So I designed a fitting stand. Inc. small optional dripping bowl. Print the Milk Frother Stand lying on it's backside down - needs no supports. I printed mine in…
UNAUTHORIZED VEHICLES WILL BE WORKED OVER WITH A SLEDGEHAMMER, FLIPPED OVER BY AN ANGRY MOB, SET ON FIRE AND SPRAY PAINTED WITH OBSCENITIES, IMMEDIATELY AFTER BEING USED AS A GETAWAY CAR IN AN INCREDIBLE DARING DAYTIME ROBBERY, sign…
A phone holder for the Smart car specifically for the Huawei Mate 20 fitted with the official Silicone cover Print instructions Category: Automotive
This is a door hinge for Railcore printers meant to prevent the door from swinging open or shut on its own. It uses a simple pin in track mechanism to lock the door open at 0, 90, and 180 degrees. To move the door between positions,…
Luftkanal zur Geräuschdämmung und Ansaugung in Bodennähe. Wird einfach in die Löcher gesteckt. Ggf. Pattafix zur fixierung nutzen. Ggf. Filz oder Schaumstoff einkleben. Gedruckt aus ABS, kopfüber, mit Support
Holder for 2 Oilbottles for HBM 25 x 550 Lathe.
Das ist eine Hülle die man um eine Kondensmilch Packung stecken kann um sie etwas zu verschönern. Das ganze habe ich mit einer 0,4mm Düse bei einer Schichthöhe von 0,3mm in PETG Gedruckt.
SUPORDE DE PAREDE E DE MESA PARA CONTROLE DO AR CONDICIONADO PHILCO
for one handed use, snap in piece to suit varying sizes of nailcutter
RailCore® II 300 ZL/ZLT Railcore is a family of Core-XY based Reprap 3D printers designed by J. Steve White, Tony Akens, and Ben Withem. Build of Materials A BOM is provided with links to where you can source the parts and available…
SpafilClip, the (IMHO) best and only 1.75mm filament clip you need. I prefer the self locking clips as they are not dependent on fitting a certain spool model. The downside is that they slip, or they put stresses on the filament causing…
My own version of the Philco model 511 vintage radio speaker. These were wired to the main radio, and are very hard to find. I needed one for a show, so I built a wooden version of the main radio (the originals are metal, painted to look…
This is a model of the top portion of the full sized Filco Majestouch 2 case. I was inspired to make this case, as I often see custom TKL cases for sale, but almost never any full sized. Due to the size of the case I needed to split it…
Adapter to mount a Gopro or similar device to a Wilcox L3 G10 NVG shroud. Will require a separate backplate that can be found from airsoft shops for around $7.00 USD. Search for “Warrior Wilcox Adapter for L3 Series Mount Plate (Black)”…
This is an updated Saddle for @Extrutim Cheap Filament Storage Box, and @PhilCaruso AutoRewinder I think it looks nicer and is more stable, and fits the base better. It's an triangle tower style saddle for the Auto-Rewinder that fits…
The „easyRailClip“ is suitable for many different bags. The Adjuster can be moved along the clip to adjust it to the respective size . I used PLA for the parts. The Adjuster has 100% Infill.
For those days at the range, in the safe, etc… Keep the tailcap and wire secure while the flashlight isn't being used. There are two models. One attaches via M Lok by itself. The other attaches to M Lok along with the flashlight mount.…
Started with an excellent tractor tire STL from Ethan Fehrman on Thingiverse, reduced the size to 45% and stacked them side by side in the slicer and overlapped them a little bit to make them appear to be one piece. Exported this assembly…
This is my simple PanelDue 7i case for the Railcore II. The screen will be 0.5 mm recessed from the front but other then that everything should be flush with everything. The used M3x18 screws but any 3mmx18mm screws and hex bolts should…
The lid of the box requires a 3mm clear acrylic sheet. The design files include a template for laser cutting. If cut manually, target a tolerance of +0/-1 mm and print the drill guide for the 2.5mm Diameter tap holes. Required tools and…
Very short length minimalist rail-car rerailer that fits code 83 rail or larger. Designed to be portable/moveable but could be glued or rubber cemented into place if desired. Tested with Atlas code 83 track and was able to consistently…
A model of the Mullermilch bottle...
The is for the Philco radios Circa 1940's that use the short push button. The knob measures 0.485x0.477x0.65 I designed the slot slightly larger than the shaft and added a ridge inside the slot to hold it firmly on the shaft. This works…
LED diffuser assembly designed to attach to the 1515 extrusion of the Railcore II. The assembly is designed for 10mm wide LED light strips that can be cut in 100mm segments. Each assembly dovetails into another so that the diffuser…
Since most filaments aren't really food safe, I remixed the original to create a mold for (hopefully food-safe) pouring silicone. I printed everything in PETG, 0.15mm layer height. Increase infill to make the handle stiffer.