Search results: improv

Sort order

2,591 models

The Original Dragon Egg - New & Improved for 2025

For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
68,033
Likes
11,899
Rating
4.93
P
Printableswedgeworks

Improved Fruit and Vegetable Washing Basin now with Southern Hemisphere support!

***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…

Print approx. €11.13–€13.60 excl. taxPreliminary estimate for one variant

Downloads
6,102
Likes
998
Rating
4.9
P
Printableseried

18650 improved spacer/holder

I attempted to use some 3D-printed 18650 spacers, but they weren't ideal. The injection-molded design you can get from aliexpress has two identical tabs on each side, which makes the other printed alternatives weaker. This updated module…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
4,628
Likes
382
Rating
4.41
P
PrintablesJurriaan

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
2,206
Likes
355
Rating
4.87
P
Printablesanimatorgeek

Improved Fast-Printing Screw-Top Desiccant Container (v2)

This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,968
Likes
464
Rating
4.95
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,244
Likes
318
Rating
5

Würfel Cube Puzzles, 3 Difficulties, Enlarged, Labelled, Improved Tolerances

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant

Downloads
1,051
Likes
314
Rating
4.91
P
PrintablesHD_Creator

Much improved Ender3Pro fan duct (drop-in compatible)

This very easy print can be swapped into the Ender3Pro within one minute and improves the part cooling capabilities significantly, without the need for a new fan. There are numerous highly respected YouTubers out there that have shown…

Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
560
Likes
30
Rating
4.44
P
Printableskaje

Filament Clip - Mini Curved Version 3 - IMPROVED AGAIN!

NOTE : Check for newer and better(?) versions of this clip by searching for “filament clip mini curved” : https://www.prusaprinters.org/search/all?q=filament%20clip%20mini%20curved This is my third attempt at getting the “perfect”…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
547
Likes
69
Rating
4.87
P
PrintablesCreative 3D

NEW & IMPROVED MILWAUKEE PACKOUT TAGS & INSERTS -NOW SWAPPABLE

These tags simply snap onto the aluminum corner posts of the Milwaukee Packout Bins. Print with PETG for best results. I have redesigned the original version so that they do not require any gluing/ds taping, they are much easier to…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
489
Likes
172
Rating
5
P
PrintablesMarcus

Cable Tamers Improved 🚀

This ist a remix of GP Studio's “Cable Tamers” – updated with some improvements. The ends were shortened as they often stood in way when winding up a cable. Also some material was removed for faster printing and less filament usage.…

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant

Downloads
405
Likes
83
Rating
4.89
P
PrintablesIra S

Tick Spoon - Tick Removal Tool Improved

This tool is the best way to remove a tick. It is thin enough to slide against the skin and get under the tick. As you slide, rotate slightly to wedge the tick into the V-slot, then pull. The handle keeps your hands away so you don't have…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
346
Likes
27
Rating
5
P
PrintablesmoWerk

Military Letters Template | improved update

Draw military letters using the Black Ops One font The letters are 1cm high and have 2mm letter spacing. Update: The 2mm spacing is now also respected at the sides. Making it easier to align the outer most letters correctly. As shown in…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
69
Rating
0
P
PrintablesJakub Kočí

Improved Prusament spool soda bottle birdfeeder

This is a roof part for prusament spool birdfeeder by RT3D Workshop. The original model risks getting the fod wet and causing disease to birds. This is simply an extension with soda bottle threads, no gluing is needed. The original model…

Print approx. €13.10–€16.01 excl. taxPreliminary estimate for one variant

Downloads
259
Likes
54
Rating
5

Improved holder for TwoTrees Laser "Focus Assist Metal Column" v1.0 — TTS-25 (2.5W), TTS-55 (5.5W), TTS-10 Diode

With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant

Downloads
157
Likes
26
Rating
5
P
Printableschoucroute6790

Improve Microtik CRS310 cover with 140mm fan

Custom cover to improve Microtik CRS310 cooling and meaningfully reducing noise by replacing the original 40mm DC fan with a pc case 140mm one.

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant

Downloads
143
Likes
6
Rating
0
P
Printables3D Druck Felix

Silica gel container (improved)

This is a remix of the silica gel container by the user TC! I used the container A model that fits Prusament spool Diameter 50 mm Height 70 mm - fill the container with silica gel perls - add a sensor module - put it into your filament…

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
46
Rating
5
P
Printables3DMason

NOCTURNAL - Use the Stars to tell the Time [improved version]-Northern Hemisphere

This is an improved version of the original design at: NOCTURNAL - Use the Stars to tell the Time [original design] by 3DMason | Download free STL model | Printables.com NOTE: This is for use in the Northern Hemisphere only. The…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
92
Likes
30
Rating
5
P
PrintablesGdubizm

Ducky Sub 2.0! Submarine Duck IMPROVED :)

Rubber Duck combined with realistic Virginia Class Submarine parts and cool sunglasses for style points! A fun collectible for rubber duck fans with submarine interests. Use the .3mf “modular” file paired with the “accessories” file to…

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
14
Rating
0
P
Printableskyleireland

IMPROVED Raspberry Pi Camera Mount - Waveshare - RPi Camera (B) - OV5647 - 40mm

So I am new to Fusion360 and made an improved version of my Raspberry Pi Camera mount! This Camera specifically is; Waveshare - RPi Camera (B) - OV5647 This mount uses two 40mm fan spacing screw points. I made this to match the 40mm fan…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
2
Rating
0
P
PrintablesTaneli R

Audi A4 improved bag hook

This is an improved design of Audi A4 Avant trunk bag hook.

Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
3
Rating
0
P
PrintablesRetroTechy

Improved Case for Chinese 10 MHz OCXO

I had to very slightly increase the size of the circuit board mounting holes, just using a drill bit by hand, to get the board to drop into the bottom of the case. I printed with PLA and have had no heat issues running the circuit board…

Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
2
Rating
0
P
Printablesdmc53

Prusa Core One Air Vent Shield (Improved)

Remix Changes: The original version that I created ( https://www.printables.com/model/1238322-prusa-core-one-air-vent-shield ) did not fit on the Prusa Core One print bed so I included a split variant. However, I was not happy with the…

Print approx. €8.31–€10.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
12
Rating
5
P
PrintablesGizmo Gurus

DecoEdge: Wall-Mounted Cable/Cord Clamp (IMPROVED VERSION!)

02/05/2025: Improved version! There was an issue with doing print-in-place. The offset was not large enough to prevent fusing of the two parts during printing. This has been fixed. Use a screw driver through the middle opening to work the…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
7
Rating
0
P
Printablesmageb

Improved knob for Bosch GCL 2-15

The original slide switch knob is not very ergonomic - so break it off and replace it! You have to break off the original knob. So do this at your own risk! I have printed the new knob in red PETG using tree supports and 0.15mm layer…

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
1
Rating
0
P
PrintablesDvG3DAtelier

Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung

The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
Printableszuim

Improved hinges and Door handle for Lack enclosure V2

Door handles are a custom design with: Magnets very close together for max strength The same 20×6×2 mm magnets as the rest of the enclosure Printed screws Hinges are modified with: Reduced magnet distance Printed screws Allows moving the…

Print approx. €5.68–€6.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
11
Likes
1
Rating
0
P
Printablesguest posting

Social Bookmarking Sites to Improve Google Rankings

Introduction Social bookmarking sites allow users to save, organize, discover, and share web pages online. For SEO professionals, marketers, bloggers, and website owners, these platforms can also support content discovery, referral…

Print approx. €6.32–€7.73 excl. taxPreliminary estimate for one variant

Downloads
0
Likes
0
Rating
0
P
PrintablesBlizzard

Improved Bambu Lab Reusable Spool Holder

This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…

Downloads
54,285
Likes
6,206
Rating
4.9
P
Printablesagepbiz

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…

Downloads
42,152
Likes
8,919
Rating
4.87
P
Printablesfuchsr

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

Downloads
37,580
Likes
5,605
Rating
4.91
P
PrintablesDamon Cui

Improved version of gravity knife fidget toy,no screws needed

Print, assemble and play directly, no screws needed 8-11

Downloads
28,282
Likes
3,628
Rating
4.79
P
PrintablesDavid Kingsman

Improved Wandering Hour Clock

Introduction How to read: The current hour points to the current minute. This is a rework of the wandering hour clock by clockspot : https://www.printables.com/model/69885-wandering-hour-clock I changed the mechanism, they did the concept…

Downloads
8,481
Likes
6,458
Rating
4.78
P
PrintablesFlaminSpike

Counter Bin 2.0 - Improved Kitchen Cleaner

Counter Bin - Improved Design for Effortless Kitchen Clean-Up Model Overview: Introducing the Counter Bin , a refined and enhanced version of existing kitchen counter cleaning solutions. This model combines the best features of two…

Downloads
7,659
Likes
2,690
Rating
4.82
P
PrintablesBike Cyclist

Improved Auto Coin Sorter

Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.528: AUD - Australian Dollar update only. 50 cent coin dimensions increased to match the circumradius of the 12-sided coin. Should sort and stack just fine…

Downloads
7,451
Likes
788
Rating
4.19
P
PrintablesDET-Man

HappyHub - Improved Filament Loading for BoxTurtle (4-in-1 Hub)

The 🥰 BoxTurtle's 4-in-1 hub can be a bit “ temperamental” 😖 when loading filament in certain situations (especially on lane 4 ) with the filament getting caught and stuck in the bearing recess at the end of the filament path. There is…

Downloads
7,134
Likes
130
Rating
5
P
PrintablesFaran Gillbanks

Assembled SR-71 Blackbird with assembled improved base at 150%

If you would like to download this, please do so from MakerWorld - https://makerworld.com/en/models/96340

Downloads
7,021
Likes
1,975
Rating
4.95
P
PrintablesRyan Bailey

Bit Holder Remix with Relief Cut Corners - Improved Bit Holding

To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…

Downloads
6,579
Likes
1,810
Rating
4.92

Flashforge Adventurer 5M (AD5M) IMPROVED Spool Holder, Inlet, Runout Sensor Mount + SIDE MOUNT Spool Holder! v1.1

This was made for use with the DIY enclosure available here . HEADS UP - 1 of 3 - new better version of this! I've published a new, improved remix of my popular side-mounted spool holder — PLEASE NOTE: it's not just about the four…

Downloads
6,537
Likes
644
Rating
4.6
P
PrintablesIMPROV3D!

IMPROV3D! Adapterspule für Bambu Lab X1 AMS

Kleine Spulen passen nicht ins AMS. Bambu Lab gibt eine geeignete Spulenbreite von 50-68mm und einen Durchmesser von etwa 200mm an. Kleinere Spulen wie etwa die 250g magicPLA von 3DJake können mit dieser Adapterspule und den passenden…

Downloads
6,156
Likes
399
Rating
4.89
P
PrintablesB M A

*REALLY WORKS* Centauri Carbon Silencer Quiet DUAL Fan Shroud Muffled Intake Exhaust & Improves Internal Temps

All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…

Downloads
5,896
Likes
908
Rating
4.94
P
PrintablesVoltex

Sunlu FilaDryer S2 Improvement Wedge

So I just received my new Sunlu S2 Filament Dryer and it had the chance to be better than my current favourite, the Eibos Easydry. It gets hotter internally and heats evenly from all sides. There are however two major design flaws that…

Downloads
5,746
Likes
828
Rating
4.9
P
PrintablesBMPrintShop

Zinc 2.0 All Improved Parts

Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these designs of which I offer hardware kits for: Zc Aus Znc Aus Znc Aus Cosmetic Part Variants Zinc .50 Zinc .50 Cosmetic Part…

Downloads
5,635
Likes
2,680
Rating
4.75
P
PrintablesShadowcaster72

Universal Plate/Picture Stand with Improved Base

Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…

Downloads
5,547
Likes
286
Rating
5
P
PrintablesArrowSwift

Improved Bullet Container

I got some Sunlu Gold PLA for Christmas and I knew what I had to print with it. It won't kill any werewolves (yes I know those are silver bullets don't get mad at me you can print it in silver), but man does it look sick. I changed the…

Downloads
5,206
Likes
989
Rating
4.91
P
PrintablesJEng

Creality K1 - Improved side fan silencer and protector

I was looking for a silencer and a protective grille for my K1 side fan. There is a wide range on offer here, but any grille in the airflow can increase or decrease the noise. As I didn't want to test everything, I constructed my own. My…

Downloads
5,187
Likes
365
Rating
4.79

Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v3.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
4,939
Likes
451
Rating
4.96
P
PrintablesTechnoid

Prusa Mk3S/+ Improved Fan Shroud

This is a completely redesigned fan shroud for the Prusa i3 MK3S/+, which not only delivers fantastic airflow like the old Mk3 shroud did, but which also sits far away from the heatblock and will not melt when printing at high…

Downloads
4,811
Likes
505
Rating
4.63
P
Printablescolorful-corvid

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Downloads
4,568
Likes
300
Rating
4.77
P
Printablesmathiaspl20

OTF Knife Switch Blade (Functional) "improved" version v1.3

I took David6722's genious OTF Design and tweaked it a bit, I added places for screws, a pocket clip, altered the button and made a few more improvements. Prints very easily but may need some supports on the newly created overhangs. Print…

Downloads
4,545
Likes
493
Rating
4.22
P
PrintablesJuan Puchol

Improved MK4 Fan Duct

This fan duct improves the air flow so the overhangs are better (up to 70º with very good quality, 3rd picture) I recommend to use Prusament PC Blend-Carbon Fiber or PA11-CF, because they are heat resistant and to reduce weight mainly,…

Downloads
4,432
Likes
878
Rating
4.86
P
Printablesagepbiz

Print-in-place and articulated MiG-23 Jet Fighter with Improved Wingdesign

Projectvideo (F14 with breakaway): https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated.…

Downloads
4,412
Likes
875
Rating
4.82
P
PrintablesGarage Maker

A remix of the Zipper Slider Jig with clamping improvement

I added holes to allow fixing this Zipper Slider Jig with clamp . Clamp can be used on the sides, front or back

Downloads
4,366
Likes
280
Rating
4.71
P
PrintablesPhilCraft

Improved modular gridfinity drawers

The original model was already pretty good, but I wanted the same style of drawer for everything, whether I want to use it with or without bins. Also I absolutely wanted a pull-out-protection. I also wanted labels, so I added slots for…

Downloads
4,250
Likes
1,706
Rating
4.85
P
PrintablesLoboCNC

Zoom Phone Tripod (Improved)

This updated version of my Zoom Phone Tripod tilts to any angle, including tilting forward for those awkward zoom yoga classes. Collapses nicely for storage. This version fixes a few issues: the legs snap into place more firmly, the jaws…

Downloads
4,052
Likes
1,008
Rating
4.75
P
PrintablesGiwi

Figet Clicking Wheel Version 2 Improved

Make sure to enable "detect thin walls" for printing! Hi, this is my improved Version of my Fidget Toy. It features a lighter and more consistent spring design which can also be removed. If you are not happy with the resistance you can…

Downloads
3,838
Likes
349
Rating
4.6
P
PrintablesGuilouz

FLSUN V400 Improved Fanduct

Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved

Downloads
3,819
Likes
307
Rating
4.96
P
PrintablesAndrew Frahn

Honeycomb Storage Wall Improved Hex Inserts

Put simply - So easy to remove they fall out. UNTIL you put something into them, then so tight they might even hold tighter than the original design. How? Magic of course. The inserts for attaching to the wall also have the same cuts to…

Downloads
3,792
Likes
989
Rating
4.87
P
PrintablesSHQ

V29.1 improved whistle - significantly louder, angry version

Since i was a little bit disappointet of the relatively low noise level of the original V29 whistle, i had to improve it. This whistle has larger cavities and therefore a lower pitch. The interval between the two tones is larger and more…

Downloads
3,711
Likes
481
Rating
3.89
P
PrintablesNairod

Fast Start GCode + Improved Quick Bed Leveling - End Retract Back to AMS for Bambu Lab X1 X1C & P1P

V5 For P1P and X1C As this is skipping the LIDAR but keeping the Bed Leveling if desired. Date : 5 March 2023 Improvements: -Improved the overall speed of the start gcode -Reduced the purge of filament by a factor of 21 times 5mm vs 105mm…

Downloads
3,705
Likes
236
Rating
4.67
P
Printableswillsside

Improved Fractal Pyramid for Vase Mode - Remix

This is a remix of ricktu's Fractal Pyramid on Thingiverse that is more reliable for slicing in Cura 5.1.0. When sliced in vase mode, the original model had thousands of retractions on the first layer. So I edited the original models in…

Downloads
3,481
Likes
414
Rating
4.95
P
PrintablesLoboCNC

Improved One-piece Capo

More stylish! More functional! More printable! This is an improved version of my earlier guitar capo that includes a number of improvements: Rubber in the presser bar frets the strings with no buzzing and with less force. (I've also…

Downloads
3,464
Likes
275
Rating
4.58
P
PrintablesSDHayes

MUCH Improved Spool Winder - Helical Gears

Version Two of my reimagined spool winder. Les Kaye's model is really nice, but as I mentioned in my previous remix I ran into several issues (some mechanical and some cosmetic) that I felt could be improved, hence my Reimagined Spool…

Downloads
3,430
Likes
645
Rating
4.8
P
PrintablesKanyonKris

IMPROVED Rocktopus

Most Rocktopus have a very rough transition between head and body. I rebuilt this Rocktopus from the original Dr. Smolder Bravestone and the latest version of the mini octopus and made a nice smooth neck. The 3MF file is from Bambu Studio…

Downloads
3,343
Likes
103
Rating
4.95
P
PrintablesJason

Core One Buddy3D Camera lid remixed to improve view of printbed

Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…

Downloads
3,319
Likes
493
Rating
4.77
P
PrintablesBike Cyclist

Improved Auto Coin Sorter V7.5 - Coin Roll + Classic Version

Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…

Downloads
3,163
Likes
289
Rating
4.13
P
PrintablesDDRBoxman

Giant Lego Skeleton (Face & Arm Improvements)

The arm file is a 3mf that modifies the arm joint by adding a negative sphere body to make it attach better to the torso. You will need a slicer like PrusaSlicer that supports this. I've also attached a head and face insert that may need…

Downloads
3,149
Likes
584
Rating
4.41
P
Printablesvivamus3d

Sock Clips for Laundry Rack (improved, V4)

lundiplutzmus created a brilliant design to hang sock, face-cloth, handkerchief, etc. on the rod of a dryer rack (aka airer). But even brilliant doesn't mean there are no details that can be improved ;-). So I tried a few: I rotated the…

Downloads
3,124
Likes
143
Rating
5
P
PrintablesIncedius

Dummy 13 Improved Hips

Drop in replacement for the hips. I know there are already improved hips for the dummy 13 but these are different I swear! I always had trouble with the other improved hips either with printability or with assembly. So here's my take on…

Downloads
3,081
Likes
893
Rating
5
P
PrintablesOndrashek

Dyson V15 Trigger Lock - improved design

This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…

Downloads
3,008
Likes
236
Rating
4.28
P
PrintablesBemko

Improved bearing-less Xbox One controller mini wheel

A small modification of the bearing-less mini wheel by mrplasma ( https://www.thingiverse.com/thing:4498704 ) which is based on the pixel2 design ( https://www.thingiverse.com/thing:3049220 ). Details I noticed that in the original design…

Downloads
2,887
Likes
214
Rating
4.83
P
PrintablesNoWarrenty

Gridfinity LITE Ultra boxes, improved version with STLs

These are ultralight boxes, yet they're durable enough to hold heavy items. When gripped by the sides, they don't feel flimsy. They lack magnet holes and have a flat bottom, making them perfectly compatible with the cost-effective…

Downloads
2,864
Likes
477
Rating
4.81
P
PrintablesTofuMonster510

Magnetic Ratchet Organizer / Holder - Improved

Magnetic to attach to the metal bottom of a toolbox and hold the ratchet better. Modular design allows for customization to your needs. The integrated linking pin can be easily cut off with flush cutters. Should fit most ratchets, 1/4…

Downloads
2,713
Likes
253
Rating
5
P
Printablesbwaslo

Floating Cup improved, good balance

This is an improvement on the rather popular "Floating Cup (smoother look, foolproof assembly)", https://www.printables.com/model/164778-floating-cup-smoother-look-foolproof-assembly . See that model for some notes and directions of how…

Downloads
2,614
Likes
610
Rating
4.93
P

iPad stand - improved and updated

Summary This is an improved version of the iPad stand. Here is what I changed: Added the knobs to the inner part to keep it in place when the stand is folded Reduced the gaps between the moving parts to make the model less wiggly Rounded…

Downloads
2,604
Likes
238
Rating
4.69

(1 of 4) Flashforge Adventurer 5M (AD5M) IMPROVED, SIDE-MOUNT Spool Holder, Inlet, Runout Sensor Mount! v2.1.1

FAQ Q: I printed your enclosure and I can’t figure out how to install the filament sensor / spool holder. I’ve looked on YouTube for installation videos and still stuck. Any help would be greatly appreciated. A: Not long after the initial…

Downloads
2,520
Likes
207
Rating
5
P
PrintablesJCVB

Elegoo Neptune 4 (Pro/Plus/Max) improved Cable Clip

An improved version of the OEM cable clip on the x-axis of the elegoo neptune 4, 4 Plus, 4 Pro and 4 Max. It doesn't pinch the cable like the original one does and has an angle that prevents the cable from touching the z axis' lead screw.

Downloads
2,491
Likes
254
Rating
4.71

Paper Towel Holder - NEW and IMPROVED - Version 3

Redesigned holder (V2) with improved threads that do not need to be scaled down/up. Just print all parts 1:1. Less material and shorter print time. Recommended print settings: Layer height: 0.2 Mode: Speed Infill: 10% Material: PLA (PETG…

Downloads
2,465
Likes
277
Rating
4.88
P
PrintablesUncleFrankSays

UFS-138 Eiffel Tower - More Realistic Improved for Printing

New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…

Downloads
2,386
Likes
86
Rating
5
P
PrintablesOR

Improved Dispenser for Lickable Cat Treats

This is an improved version of the print-in-place dispenser for lickable treats for cats. It reduces the messines of using such treats and allows to retrieve every last drop from the tube. The model was tested by printing in PETG using…

Downloads
2,296
Likes
664
Rating
4.5
P
PrintablesPiotrownik

Improving fine motor skills, designing a 3D FDM printed orthosis to assist in the rehabilitation of individuals with hand spasticity

video about project: [v 1.0] The project is currently in the alpha phase. I'm sharing the model for the finger, thumb, and wrist stabilizer, which can be molded to fit the wrist shape by heating it with a hairdryer or heat gun. To adjust…

Downloads
2,253
Likes
1,150
Rating
4.13
P

New Improved - Skadis Cable Holder

Here's my wire and cable holder, specifically designed for the Skadis storage system. This innovative holder is designed to fit into your Skadis board, providing an elegant and practical solution for cable management. Its design is…

Downloads
2,249
Likes
297
Rating
4.88
P
PrintablesJuan Puchol

Improved MK4 Fan Door

Cover the fan cable. Better magnet fit to prevent it moving, I hate the “clic, clac” sound when opening and closing door. Center better my improved fan duct Lighter weight I recommend to use my Improved Fan Duct:…

Downloads
2,224
Likes
302
Rating
4.92
P
Printablespristine wizz

Improved buckle fidget

bunckle sam (sorry for using the original pic wanted it to be recognizable as pretty much the same thing)

Downloads
2,208
Likes
657
Rating
5
P
PrintablesPeter Farell

New and Improved Low Poly Jesus

My old Version of a low poly Jesus was garbage. Hopefully this makes up for the old versions lack of inspiration.

Downloads
2,207
Likes
316
Rating
5
P
PrintablesShawn Gano

Among Us - Dead or Alive (Improved)

alpokemon did a great job modeling the outside shape of the 'Among Us' characters ( https://www.thingiverse.com/thing:4595212 ); however, the joinery I felt could use some improvements. I changed the Legs, Heads and Guts. The major…

Downloads
2,201
Likes
335
Rating
4.83
P
PrintablesJoepie

Strawberry Crown Remover (Improved)

I was trying to find a model like this, but I couldn't find it, so I decided to make it myself. Very easy to print, Under 20 min. HOW TO USE: Gently insert at the top of the strawberry, where the crown is fixed to the strawberry. Make…

Downloads
2,170
Likes
843
Rating
4.86
P
Printablessiamigo

Logitech C920 privacy cover improved

Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.

Downloads
2,169
Likes
227
Rating
4.89

Improved Crystal Dragon

Changes: I was getting feedback that the tail was very delicate and you needed to be careful while pulling it off the build plate. And it also looks kinda wonky with the small head and massive arms. So I upscaled the head and tail parts…

Downloads
2,135
Likes
342
Rating
4.89
P

2,3,4,5,6,7,8 Pin Dupont Cover With Improved Hinge

NOTE: Do not print with supports. The model is designed to print without the need for supports Print settings (example) Rafts: No Supports: No Layer height: 0.2 mm Infill: 100 % Thank you @SpiderGod_2164882 & @Chris_Walnut_3378485 for the…

Downloads
2,122
Likes
987
Rating
5
P
PrintablesIPIND 3D

Prusa MK3S Improved 45 Degree Fan Shroud

Based on the original Thing from K_Lab - thanks for the source Fusion 360 files: https://www.thingiverse.com/thing:3533859 and the remix from Theo Tinjum:…

Downloads
2,074
Likes
364
Rating
4.89
P
PrintablesTy10y

Improved Soldering Tweezers

Hello 3D Printing Enthusiasts! This Thing is my version of Soldering Tweezers! Simply print the long base, 4 handles, assemble, and you get a super versatile wire holder for your soldering station! The original tweezers design was remixed…

Downloads
2,029
Likes
490
Rating
4.79
P
PrintablesAdamR

Creality Sonic Pad improved accelerometer sensor bracket for Ender3 S1 & Ender3 S1 Pro

I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad. So I created a version which simply slots in (firmly) to a semi-permanent bracket on the…

Downloads
2,018
Likes
168
Rating
5
P
Printablesjanosrusiczki

Phone Stand (Improved Charger Cutout)

The original model was good looking and very sturdy. The only problem was that when printing on its side a part of the “upper” edge of the charger cutout would be printed into thin air. To be able to print it without supports or without…

Downloads
1,987
Likes
178
Rating
4.86
P
PrintablesBike Cyclist

Improved Auto Coin Sorter V7.5 - Coin Roll + Classic Version - STL Files in Folders

Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…

Downloads
1,985
Likes
149
Rating
4.18
P
Printablesbkerler

Core One / Core One + / Core One L w/o MMU3: Improved All-In-One Temperature and Bridging Tower -- High to Low Temps PLA/PETG/ABS/TPU (Remix)

See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…

Downloads
1,961
Likes
222
Rating
4.92
P
Printablescryptomilk

Vortex Fruit Washer (Improved)

I like the vertex fruit washer from Perinski , but it requires support for nearly the complete bottom. This model is a fixed version. It requires minimal support and prints nicely. If you wonder if this really works, it does. Kids love…

Downloads
1,925
Likes
234
Rating
5
P
PrintablesJakub Kočí

Improved bird feeder

This is a remix of Prusament spool bird feeder by Enos. The original model has holes in the roof and small food capacity. No supports needed, print with non-toxic filament (ABS or ASA might not be the best choice). Simply glue the main…

Downloads
1,858
Likes
561
Rating
4.77
P
Printableshigglyblarg

Giraffe Toy Improved Printability

This is a remix of this: https://www.thingiverse.com/thing:2999507 I just made some of the overhangs more printable while maintaining the aesthetic. Will print then upload photo. For this type of model I recommend variable layer height if…

Downloads
1,858
Likes
233
Rating
4.65

SpaceMouse Mini - Slim profile, with easier assembly and various improvements - v3

For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…

Downloads
1,853
Likes
720
Rating
4.86