Mincraft box
Box mincraft
- Downloads
- 914
- Likes
- 184
- Rating
- 4.9
Counting matching models…
This is a pair of simple brackets to mount an Incra miter gauge on a wall or other surface. I use two of the normal sized mounts on the outside along with a single one of the shorter mount positioned so that it gets in the way of the…
Print with support on built plate only and MMU or use latter acricil painting. After print connect together fin to the orca body. I used Z=0,3 infill 10% support pattern spacing =5
I designed this Minecraft sword so i could print it on my Bambu printer with 4 colors.
It's a Minecraft Creeper keyring. IT does require supports, so be mindful of that!
I have to flip my TS/LS fence whenever I move from table saw to router mode. It's not an exact science, so I always square the fence to the miter slot each time I reset the fence for use with the table saw. I have used the Woodpecker…
I wanted to create an Axe which would be easy to assemble and be durable for use as a toy. This was modelled in Fusion 360 and printed on an Ender 3V2 with .2 layer heights and 5 % infill to keep it light. I tried to keep the tolerance…
T-Slot nuts for Incra rail, designed to use with 1-4-20 fasteners
So far the only model I've tested on is the 1000HD, but it should work for most models as they use the same profile. The interior is slightly undersized so it's first a good idea to insert the hex key while twisting to knock down the…
This is a stop system for creating repeated cuts of different lengths using a track saw parallel guide system based on Incra T track plus. I have the Precision Dogs set, but Seneca also makes a version and you could conceivably design…
Logos for Crescent Tools, Microjig, Incremental Tools (Incra), and Milescraft If you're looking for a particular that I haven't already done, let me know and I'll get it for you.
I have the TS/LS on my Sawstop table saw. When I get to close to it, I either snag my pants or scrape myself on the aluminum corners or edges. I designed the extrusion in SketchUp so I could make designs that would fit the fence. One of…
Here is my Incra Precision T-Rule holder for my tool wall. It uses 4G screws to attach to my plywood tool wall. Print Settings Printer Brand: Prusa Printer: i3 MK3 **Rafts:** Doesn't Matter Supports: No **Resolution:** .4mm Infill: 15%…
3D print an enclosure for the BrainCraft, Raspberry Pi and Camera Print instructions If you're just getting started with BrainCraft projects, chances are you need a way of keeping parts held together. This is where a 3D printed enclosure…
This model is for wall mounting T-rules such as the Incra 300mm and 150 T-Rules. Rules can be placed/removed both horizontally and vertically. I personally printed in PLA and attached to a French Cleat wall fitting. --- If you want to…
this a mincraft dirt. It's also a hiding place
Multicolor Minecraft Enderman bookmark that I made for my kids. Easy to set up for multicolor on a single-color machine. Thin enough to go between pages or can attach to page with arms and legs.
This is a model for reference so that you can create tools for use with Incra T-track. Edit 5/6/04: Refined Fillets should be exact now Edit 5/7/24: Added a file for an 80mm Insert that slides into the track
T-Slot nuts for Incra rail, designed to use with 1-4-20 fasteners Category: Parts
A 3D printable case for the Raspberry Pi 4 with Adafruit's BrainCraft HAT , designed to complement the Learn system project lofi hip hop raspberry pi radio . This is a remix of Guysoft's Raspberrypi 4 / 4B+ case on Thingiverse, which in…
A Gridfinity compatible storage tray for the Incra T-Rule.
This is a simple little gizmo for precisely calibrating the fence on your Incra miter gauge and returning it to its calibration quickly after adjusting the fence position (e.g. for mitered cuts). The calibrator should slide right into the…
I tend to use my Incra 5000 miter sled to do the final length cut on boards to ensure I get the exact same length for every part. One of the annoying parts of doing this for me was that I always needed to steady the bolt with my finger.…
This tool holder prints without support. I used 0.3 mm PLA settings. This holds the Incra router lift hex key, the hex to tweak the Incra fence settings, and a small hex to extract plates from the lift. The holes are made to accomodate 4…
This is a holder for the Incr T-Rule that fits the SKÅDIS pegboard from Ikea. It allows you to store your Incra T-rule on top of the pegboard without it falling off. It includes two holders for mechanical pencils.
This is the 3d version of the holders I made out of scrap wood. I made 2, one for the regular set of plates and one for the cleansweep version. Holes are made to accomodate 4mm wood screws or equivalent.
Holder for the Incra miter fence, TS-LS fence, and router fence adjustment tool. Additional spot to hold the Incra Router Lift adjustment tool. Will slide into the back of the fence channel slot to keep the tools readily accessable, but…
I designed and printed this case to protect my Incra protractor. The protractor itself is useful for woodworking and designing applications; however the tool comes in a cheap little cardboard box. I wanted to design and build a case that…
Prints without support on the side. I used 0.3 mm PLA settings and reduced the model height by 2 to test strength and it holds perfectly well. The holes are made for 4 mm wood screws or equivalent.
Printables would not let me upload as a remix from another site. This is not my model. Original - https://www.thingiverse.com/thing:5758493. I never like how my router plates (Mag-LOCK) were lying around and unorganized. I altered the…
Can be printed on small, medium and large printers. See it here …
Incra it is great proffesional tool. Unfortunetly I couldn't found any holder, cover etc. Because this is verry precise tool I decided to create simple easy to use magnetic holder. Magnets for holder and magnets for Incra are not visible.…
A remix of 3DeXtruder's INCRA precision marking rules - magnetic holder/ cover I needed something just like this model. just required a few modifications for me Smaller magnets so my ruler does not get bent (too much magnet) A keyhole…
Simple toolholder that slides onto the t track of the Incra wonder fence
I wanted to protect my Incra t-rule (6"version). Seems I missed the version that had the holes for the magnets. I had not put them in the files as I did not know what size of magnets a person may or may not have on hand.
A tray for holding The Incra Ruler (30cm, 12"), Incra Precision Bend Rule and the Incra Centering Rule. Gridfinity compatible.
I wanted to protect my Incra 12" t-rule. Of course being to large for my MK3s I cut it with a dovetail joint. Glue together after. Since the top is thin if they glued up section are still loose there is a backing plate you can print and…
Simple wall mount for an Incra iBox. Print two, one for each side. I printed PLA with a .6 nozzle and a .4 layer height for speed, 3 perimeters with a 20% gyroid infill, which may be overkill but the jig is heavy.
Prints on a MK3(s) or mini Uses dovetail to connect halves print single or both at once mounts to wall with screw uses a 5x2 mm magnet hole ruler to case when hung
A storage tray for the Incra Protractor, comparable with the gridfinity storage system.
Incra Miter Gauge Fence Calibrator - 1000HD This is a remix from the original post from Robert Bieber who share this simple but great calibration tool. I'm Using an Incra Miter Gauge 1000HD on a Incra Miter Express on a Dewalt 7492 and I…
I needed easy access to my measuring tools - Incra 6 T Rule. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% No support
This is a 3x2 gridfinity tray for the Incra Tiny T. Mine is standard PLA with 0.2mm balanced height.
Support de rangement pour regles INCRA Rules 150 et 300 mm avec accroche sur mur Multiboard
Skincrawlers. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
used files for base form https://www.printables.com/model/1069620-rx-fan-side-clips-120mm-and-140mm
This is a simple clamp holder for the Incra "Build-It" clamps to get them out of the way when I am not using them. Hook part 2 to the pegboard, then slide part 1 on it. There isn't really a need to lock or glue them together, since they…
Stow your Incra V27 exactly where you cut. This slide-in GOEWS dock cradles the miter head and supports the bar so it won’t sway, scrape, or chew up your wall. Mount it beside the table saw or outfeed so you can park the gauge when not in…
utilizing the model from SkippyMcSlappyPants's Incra "Build-It" Clamp Holder for Pegboard which worked great. Only issue I had was I have run out of pegboard space. Quick alteration to the cleat to use countersunk # 6 wood screws. I used…
Multie colour Logo of Countdown/ woolworth Mincraft Cubeez. Import both into your slicer software and aline both moddles then colour them the colours you want. Multy colour printer requierd.
# 3D Printable Minecraft Keychains (Pack of 3) Bring your favorite blocky worlds to life! This collection includes 3 unique, high-detail Minecraft-inspired 3D models designed specifically for clean, fast, and easy FDM 3D printing. Perfect…
This custom story-stick system takes inspiration from the Woodpeckers design, using INCRA T-Track Plus rails with flat marking flags, bridged offset flags, caliper arms, and 3D-printed end stops. The flags were laser-cut from transparent…
Die originale zöllige Nutleiste von Incra passt nicht in die Nuten an Hammer-Maschinen wie der B3, somit lässt sich deren Ibox dort nicht einsetzen. Hier eine metrische Leiste, die in der Hammer B3 passt. Leider hat Incra ihre Vorrichtung…
Multie colour Logo of Countdown/ woolworth Mincraft Cubeez. Import both into your slicer software and aline both moddles then colour them the colours you want. Multy colour printer requierd.