1,876 models
I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Self Watering Plant Pot With Water Indicator The original outer pot is 150 mm in diameter for the inside pot to fit. I use silver silk filament from Ziro bought on Amazon for 259 swedish krona. If you wish other dimension you can message…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Edit: I added a mirrored STL for anyone that has the indicator on the right side and not the left as I have. To install this addon just print the original planter glue the floater to the indicator and press this addon behind the indicator…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 30mm x 27mm 6mm Keyring hole
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I wanted to create a cool X-axis visualizer for the Prusa Mini. I designed this based on a similar concept that I saw for the MK3S. This visualizer requires (1) 8x3mm magnet and super glue to attach the magnet to the X-Axis. The two…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Bracket to adapt the Sunshine PIP dial indicator to the Ender 3 Neo V2 and alike head style.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 30mm x 28mm 6mm Keyring hole
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I printed this in fillamentum PLA
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
A 2" swirly extrusion indicator with built in filament change (M600 - without a MMU). I recommend Black for the first color, then red, orange, or anything bright. Two 8mm magnets are glued together, then to the back (in a magnet recess).…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
I got a DF64 G-Iota, and i was not amused by the dial indicator of v4, it is good to have one but it should not scratch the surface. This little part is printed in 2 minutes and should prevent damage on the aluminium funnel.
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
Hi, I designed this to verify the accuracy level of the bed, this bracket is designed for an EVA hotend but if you have a 40x40 fan you should use this to level the bed. Printing: I printed it in this orientation: -infill 40% - walls 3 I…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
A Parametric barrier and bug trap - works on all kinds of crawling bugs including bedbugs and silverfish CURRENTLY stl are for 2" tape My building has had bug problems on and off and the best way to not become a statistic was to put Down…
Print approx. €8.64–€10.56 excl. taxPreliminary estimate for one variant
I could not find a battery cover, so I created one myself. I don’t want unprotected batteries in my bag! So here it is: the DJI Flip Intelligent Battery cover. Fits nicely into place, locked using the battery-locks. As a bonus you can use…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
EN: The funnel (for throat diameters min. 30mm) has a float gauge in the middle, which indicates the fill level while the liquid is being poured. This is useful where it is not easy to see inside, for example when pouring petrol into the…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder a test indicator on a 3/8" or 1/2" set screw TTS holder for finding zero in X, Y, and Z. This requires 2 M3 x 14mm screws and nuts to hold the indicator and form the stop. Because of size variation in prints placing a…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET
This happy little Smiley is having a lot of fun during your prints. The eyes can rotate independently if the Smiley gets dizzy. Model Designed with OpenSCAD. Print Face down / No support needed / Change the filament color after some…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Default as modeled Glue a magnet to the back after printing.
Print approx. €0.36–€0.45 excl. taxPreliminary estimate for one variant
I wanted to upgrade my quad's headlights and indicators from the originals to these: HIGHSIDER pro Headlight Dual-Stream Next LED https://www.highsider.de/produkt/highsider-dual-stream-next-led-scheinwerfer/ Kellermann Rhombus S Dark LED…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
These Dial Indicator Mounts are specifically designed for the Clockwise Dial Indicator and rebranded variants of it. May work with others untested. Here is Amazon link to purchase Clockwise Dail Indicator Clockwise Dail Indicator with…
A bicycle chain gets longer, when it is worn. This tool helps detecting when is stretched by 0.5% and 1% respectively. Those are two key points to detect when a chain needs changing. 0% is the stretch of a new chain obviously Below 0.5% a…
Hello everyone! Keep your batteries organised in style with this unique mini beer crate battery holder ! Designed as a remix from the original model on Printables, this version comes with practical enhancements like battery indicators…
I still had some black showing on my printer so I made this Extruder Indicator for the Ender 3 V3 SE. I love watching it spin around when printing. https://www.facebook.com/KD9WNR/videos/734574294767306?idorvanity=347538964267031
I noticed there's nothing like this on Printables so I upload my remix of spricvector's design (https://www.thingiverse.com/thing:2213031), which is also a remix of FactoryStandard's original model…
Universal Door Sliding Sign A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes
This is my take on a dirty/clean dishwasher indicator. There are some amazing versions of this print out there, but this was how I wanted mine. Print Instructions PETG seems to work well at 0.2mm layer height. Try out some more materials…
An extuder motor indicator made from a 3D Printable Jet Engine's fan by CATIAV5FTW - scaled down to 25%, with a cone or without. Link to this awesome printable jet engine here: Thingiverse There are three versions: With an integrated cone…
Simracing LED Flag Indicator based on an Arduino Nano and an 8x8 WS2812 LED matrix. You can indicate flags, gear, pit limiter, or whatever you like. If you like, you can put the diffusor cover on top. Frotn part with integrated diffusor…
After learning about the rotation indicators for the extruder motor, I loved the idea, but I didn't really like any of the designs I was seeing. I wanted a gear/cog but couldn't find any I liked. So I made my own, I just wanted one but…
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
A while ago I saw an extruder indicator consisting of a hamsterwheel and a silhouette of an hamster in it ( https://www.thingiverse.com/thing:3139180 ). I re-designed the wheel from scratch, took a pikachu model from Thingiverse (…
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
A very easy-to-build Airspeed Indicator for flight simulation. It comes in two different versions: either articulation by an SG-90 micro servo or with a 28BYJ-48 stepper motor (recommended). UPDATE 2024-12-21: Fusion 360 Source added…
This is a slightly modified version of the original Attitude Indicator by ZockZock . It provides a new designed bezel (as pdf) and a profiled indicator for two color print (white on black). Design and color scheme resembles the original…
A simple extruder indicator. Two rotating arrows as you know them from loading screens. Required magnet: 8x3mm or 6x3mm If you like check out my other designs too!
Compact keychains Only 10-15min printing per keychain! 6mm keyring hole 2mm tall body (i printed it in PLA and is strong enought) 1mm tall text Print Settings: 0.2mm Layer Height Material : PLA or PETG To achieve multicolour prints with a…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
===============Update 30Aug=============== a lot of people don't know where to view the bed mesh, you just need to go to your browser. Go to http://192.168.50.229/#/home change the ip to your machine ip, enter the page, then change the…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
Umpire's 4-dial and 3-dial Indicators These indicators have the dials in the traditional order of strikes, balls, outs, inning. If you prefer a “count order” you can find them here. There are two options of indicator: a four dial…
(Copied from the original listing on Maker World) DF54 true zero indicator that uses the original screw. Tight fit so it might work without the screw as well. Do not mind the reflections in the picture. Printed with High Quality BBL A1…
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
Keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 34mm x 23mm 6mm Keyring hole
Super simple visualizer that stays out of the way. And it prints in like 5 minutes. Just use a small magnet to mount like all the others.
New Models added, Hexagon, Ring and Rectangular. Need to give credit to ticktock for the original idea. The indicator uses a green 1206 SMD LED and 22k-ohm SMD resistor. Wanted low current draw and low brightness from LED. Obviously the…
A sailing friend of mine needed a vertical 'Little Hawk' style wind indicator that can be mounted at the front of their monohull dinghy i.e. where the painter is tied. I found Kieran's design. But when printed, I found the balance was…
Always been a fan of the radioactivity sign, so now that i finally have my own 3D printer i couldn't resist to make my own extruder indicator! Compliment it with: 40x40 Fan Cover Radioactive/honeycomb…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes…
Ender 3 Sprite Extruder Rotation Indicators Sprocket and Hexagon
This new hex key holder design has numeric indicators on the front to show the size of the hex keys. I've uploaded two versions of this new design: One with only the numeric hex key sizes (hex_key_holder_without_indicators) One with a…
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
I loved the look of Ardjan's non-flat hamster extruder indicator, but when I read they downgraded a Pikachu model to create the hamster I felt that an incredible opportunity was missed. Thus, I went back to the original Pikachu…
Build Video Here Config Video Here 🛒Buy it as a Kit or Assembled: https://captainbobsim.com/product/heading-indicator-kit-or-assembled/ Bill 'o Materials: x2 BYJ48 Stepper Motors (and Drivers) http://ebay.us/aS1yyZ or…
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
Today we'll be building an Airspeed indicator for the Cessna 172! This Thingiverse will soon become outdated. For the most up to date models, check out the GitHub: https://github.com/CaptainBobSim/The-Cessna-172-Project-V3 (check section…
My CR-touch may be working, but for whatever reason, my prints are not using the stored bed mesh. (Yes I added M420 S1 blah blah blah) Creality support is dismal and I needed to get back to printing! I designed this indicator mount to be…
It is not really an impact, it's more an indicator. Easy to print and easy to handle. Print it with PETG! Scale calculation: D(wish) /4,5*100% UPDATE: 22.12.23: I made the model a little bit stronger, because it is broken during drilling…
Never forget to put the right bin out again! This wheelie bin model is part of a project which tells you which coloured recycle bin is due to be collected. The code checks your local council for up to date information and this device…
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
The Printables version will not be updated. The best place to get it is here ! Find the MobiFlight code under Section 2/Instrument Bill 'o Materials: 3D Printed Parts Arduino Mega 2560 (can be shared with other components) x2 BYJ48…
This will give an indication of whether the tension on both belts are equal
This adapter allows to attach a indicator dial to the print head of Bambu Lab Printers (P1P, P1S, X1, X1C) to measure bed flatness. I am using a STEINLE 3105 (EAN 4251285620469) to do the actual measurements. If the adapter does not fit…
The Printables version will not be updated. The best place to get it is GitHub ! Find the code under Section 2/Instruments/VSI To navigate all of the files on your journey towards homecockpitness, * Source Files is where you'll find all…
Overview A nozzle indicator for your 3d printers. I have forgotten too many times to not have one of these and it gets more difficult the more printers you have. Double sided tape is required to affix the indicator where wanted. Printing…
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
Jet engine has spiry top but I like more spherical one ;) Print instructions I suggest print with 1mm brim and leave it there at 0.15mm layer
I really wanted a trap I could tell was occupied at a glance as I would have it set in the my porch most of the year round so I added a flag which pops up as soon as the inner door of the trap is lifted. This doesn't otherwise affect how…
This is my Print in place - Compliant mechanism using Dial indicator! No supports, no assembly, just print and use! See how it works, and how it was designed!: https://youtu.be/RFkn6gMkz78 All clearances are 0.3mm/ 0.4mm/ 0.5mm, so most…
The “universal” mount will work with most dial indicators and fit's into most tool holders. The all-in-one model fits an AXA quick change tool post and replaces the back of your dial indicator. That way you're not tying up an expensive…
This filament spool gauge/indicator gives you a rough idea of how much filament you have left to work with. The hanging loop is a 50mm diameter whole which is fairly typical of most spools. You can hang this on the spindle with your…
I wanted to do something to increase a safety on roads... So I upgraded and remodeled a Loose Wheel Nut Indicator to everyone, who have a truck, delivery truck, trailer or big pickup. I remodeled a great model by FullSendFab from…
This has direction indicators for if the direction changes so you don't forget. The small arrow goes on the side with the lip. Make sure the arrows are facing opposite directions. The reason for the larger arrow is so that gravity keeps…
I made this dial indicator bracket that utilizes the LIDAR bracket for mounting to the print head. It uses (1) M4x15 socket cap screw w/ nut, & (2) 3mm heat-set inserts and the factory screws that hold the LIDAR on. Note that the LIDAR…
There are a lot of dial indicator mounts out there, but I wanted to make one that would be able to be mounted to a 2020 extrusion, as opposed to your hot end, as there are so many different types out there. I am no longer using the stock…
This is a remix of the original Extruder Indicator with a longer connector to prevent it from falling off.
I designet a simple strike indicator for fly fishing
A remix of the original from @Mikolas Zuza Because I have the awesome extruder motor cooler from @wda https://www.thingiverse.com/thing:4280200 and the brilliant RHD CS Nozzle for the MK2.5/3S from @RH_Dreambox…
It's a Bat Extruder Rotation Indicator for Ender 3 S1 pro print it slow at first because there are many small parts
DJI Mini 3 / Mini 3 Pro / Mini 4 Pro Battery Case for Intelligent Flight Battery with snap on. After a flight I often forgot witch battery in my bag is recharged. You can switch the mechanical indicator on the bottom from Full to Empty.…
A simple bracket to be able to easily read height to bed from a Sprite Extruder on an Ender 3 S1 Pro or Plus. Stop using the "paper trick!" With an Allen wrench, this allows simple removal, installation, and some height adjustment for the…
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
Jan24. Minor updates to some angles and tolerances following Xmas 23 present builds. Modified indicator which now holds a more central position when in the extreme ‘up’ (out of water) position. Code for Mk4 added alongside updated Mk3…
This a flex filament connector for SPC serial ports commonly found on digital calipers and indicators, for those wanting to build a DIY DRO or simply read the data off the calipers over serial. Update : check out #EspDRO which uses an…
Video about holder Designed to fit Gridfinity baseplates designed by ZackFreedman Holds Mitutoyo 513-473-10 test indicator or any other similarly sized indicators.
NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…
This replaces the cardboard wind direction indicator that came with the game. The one in the picture is with the background and printed in two colors. It fits perfectly inside the game component. Print Settings Printer Brand: Sovol 3D…
Umpire's 4-dial and 3-dial Indicators These are “Count Order” indicators. The order of the dials is balls, strikes, outs, inning -- the same order as you would announce the count. If you prefer a traditional order you can find them here.…
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
A replacement back for a dial indicator that lets you mount it to the X axis rail of a Kobra 3. It is designed for an inexpensive WEN model , but based on some other models I tested, should work for the popular Clockwise digital model or…
