91 models
BitBox. Filament : Devil Design. Ocean Blue. ( 100% makita blue. ) PETG 0.20mm. 15% Infill : Gyroid. Nozzle : 230c. Bed : 90c. Support : None. BitBox. latch. Filament : Prusament. matte black. PETG 0.20mm. 15% Infill : Gyroid. Nozzle :…
Print approx. €9.44–€11.54 excl. taxPreliminary estimate for PETGSource material: PET
BitBox-v2 Filament : GST3D. PLA + Army green. PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support : None. BitBox. latch. Filament : GST3D. PLA + Black. PLA : 0.20mm. 15% Infill : Gyroid. Nozzle : 215c. Bed : 60c. Support…
Print approx. €9.69–€11.84 excl. taxPreliminary estimate for one variant
A cleaner box to hold your bits! NB! - still testing it out, please give some feedback if you encounter som problems.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
With this simple snap on lid you can easily protect your Bitbox hardware wallet from scratches. In addition to that, the very exposed USB-C port is protected as well. The case can be easily removed from the wallet with a thumbnail. Note:…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Additional to the printed part, you need to glue some felt to protect the screen and secure the Bitbox in the case from falling. I used this: https://amzn.eu/14G9TFd
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Mit diesem Set können Sie sich eine Bit-Aufbewahrungsbox drucken. Dabei können Sie 8 große Bits in die Box stecken und mit einem Drehverschluss oben zuklappen. Außerdem können Sie die Bits mit 8 einzeln gedruckten Schiebern und…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Please check out the tutorial video for this project: This is a smaller Hitbox controller based on the original design by @MarshallSwann_620220. I love the look of the design created by Marshall Swann but I wanted to modify it to work…
This is a hitbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
This is a hitbox-layout fightstick controller that uses 24mm (Sanwa OBSF-24) and 30mm (Sanwa OBSF-30) arcade buttons. There's a version with 6 and another with 8 action buttons. There's also a 218mm-wide version that should fit on an…
This is a 3d-printed hitbox case I've made for myself some time ago. I have wanted to upload it to the site, but have postponed it several times due to the complexity and amount of work required to make it upload worthy. So who is this…
Bitbox stackable folding storage boxes Easy assembly, requires no glue or screws, 100% 3d printed. When stacked they click on top of one another, has an extendable handle and customizable storage slots. Perfect for jewelry, sewing…
An all button fightstick also known as a hitbox or leverless arcade stick. Beats having a joystick as it's quicker and more precise with movements. This is an early design of mine that I attempted designing one. Functionally works but…
This is a Hit-box style controller I designed in fusion 360, the outer shell is purely for aesthetics and does not need to be printed although you would need to accommodate with a shorter screw. This design uses a Raspberry Pi Pico as…
Check out this project's successor here. Overview I was looking to replace my giant Fighting Edge hitbox with something a bit more compact and found the Snackbox Micro, while a really great product, a bit too small for me. Even the Micro…
Shitbox Edition badge for that special vehicle. Category: Parts
I wanted to test whether hitboxes are suitable for me, but didn't want to print for five or more hours. So I designed a fast printable one.
I am finally releasing this model after a few fixes. Design was influenced by Vaunt's Tiltbox. This was done on tinkercad so there is no step file. I am moving on to learning Onshape so I will no longer be working on this model. Not a…
As I'm posting it as a remix I won't add much more here. If you have any questions feel free to ask I'll be happy to answer. To fix a screen to the case you just line up displlay and then melt plastic pins with a soldering iron. Low…
Having too much fun with the chamfer tool on F360. Printable with 0.15 or 0.2 layer height. will fit any thin controller with less than 18mm thickness. i.e. Flatbox, Razer Kitzune, Junkfood micro. etc.
I wanted to try a few different button layouts, and rather than print the same body multiple times wasting a lot of filament, I made the front face of the body swappable. All it needs is a few extra heat insert screws (the same size as…
The source marked this model as adult content.
This is the splitbox, a fighting game controller designed with ergonomics and portability in mind! ERGONOMICS The angles of the top pieces and the buttons are intended to let you keep your hands, wrists, and arms in safer positions and…
This is a remix of a remix…. Hitbox Arcade Stick - 16 Buttons - Remix . There are 2 versions. Edit: Added the correct versions of the cases that have bolt holes for the NAUSB-W-B Changes to both: Slightly increased the model size 240mm x…
Been using this box for half a year in construction and it has yet to fail. Holds 30x 25mm bits and two up to 60mm long extensions. Printed in Prusament PETG Prusa Orange
SLIMBOX - hitbox arcade fighting stick I remix the top case with M3 Brass Screw Insert 8pcs M3 * 4mm brass insert 8pcs M3 * 6mm countersunk screw I add 4 bumpons cut out at bottom to prevent slip when playing 4pc 8mm diameter bumpons For…
You can find the original design here. Updates 12/22/23 Uploaded split models for printing on typical FDM machines. Holes for 2mm steel rods were added on the base to add strength. I recommend buying 2mm x 300mm rods and cutting them down…
I looked at various different hitbox cases to build a https://gp2040-ce.info/ compatible case and found none of them quite met my needs (albeit being very close, particularly jfedor's different options and tryptech's amazing remix:…
Hardware Used: 6x M3x8 Socket Head Screws (PCB Mount) 3x M3x6 Socket Head Screws (Key Plate) 8x M3x18 Flat Head Screws (Bottom Cover) 17x M3nS Thin Square Nuts 9x Sanwa OBS-24 24mm Buttons 1x Sanwa OBSF-30 30mm Button 1x Neutrik NAUSB-W…
If you print this in PETG it should hold up real good on your car or other device you declared “a shitbox” . I modified the file so it should be real easy to print, and is now a “just slap it on and it works”.
Just a little keychain for the car keys. Printed with ironing, two colors.
KitBox is my attempt at creating a free and open platform for customizable tool cases. Core Features / Project Goals Sturdy outer Shell Modular Inserts for customizable storage Integrated handle Cam-locking buckle closure for smooth and…
Easy to print bait box with good fitting lid and airholes. Tollerance is nice so it wont fall off in our bag, but can be taken off easily.
I like rugged storage boxes, but I could never find one that checked all the boxes for me. So I went on the quest to create my dream box. I’ve been tweaking my design for months now and after hundreds of test prints and prototypes, I…
Hitbox with pi pico type c as controller. I liked the original model but wanted slim version with type c connection instead of fixed cable so I designed one. Orient the parts then print with 0.2 layer height. parts to print:- 1 x top 1x…
Example stl is for a 23x40.6mm, 45deg stem angle. Use #buttonwidth and #ellipseboost for the top sizing. Changing shell #thickness will change a bunch of other model aspects, so be ready to iterate if you do. If the button is hitting your…
BitBox02 case for better organization in the office
Took logo off of left lid model and v3 off of right lid model. Also included a menu button support that may help with those who are finding that their current menu button support is bending too much for super glue to easily adhere to the…
I wanted to 3D print my own Hitbox controller without spending too much on buttons. Instead, I disassembled an old Cherry MX keyboard to salvage its switches and keycaps. To begin, I had to ensure the switches fit correctly, so I printed…
Carro para poder adaptar Mosquito Hotend y BMG Bondtech en Witbox. También valido para adaptar un hotend E3D V6 en el BMG. Para los prisioneros que sujetan los rodamientos, utilizó insertos de latón. Se ponen muy fácil con el calor de un…
Keychain Case for Apple Airtags / for flexible Material only!
Print upright without supports.
Skadis Mount for the Flatbox Controller. Tested with rev5 and rev7. Not support necessary. https://github.com/jfedor2/flatbox
Pieza para cambiar el husillo original de la witbox 1 M10 a un husillo trapezoidal T8x4 con tuerca antibacklash. Con esta mejora en nuestra impresora conseguimos eliminar el z wobble de nuestra witbox 1. Material necesario: 1 unidad -…
I printed the case with Fiberlogy 40D. 0.2Layer 15% Infill
Для тех кто хочет разработать свой макет HitBox, но мучается с расположением кнопок, воспользуйтесь моим stl файлом, я делал по фотографии. 11 кнопок диаметром 24 мм 1 кнопка диаметром 30 мм
I like the Lucky Printer by TAC battery holders (thank you). But with these holders I had the problem that my Makita bit box didn't fit (last picture), so I adjusted it. Printed on the Ender 3 S1 Pro 30 infill, support,PETG. Ich mag die…
Buttons with labelling for the Flatbox Controller - Project Files for Prusa MMU and BambuLab AMS
Designed for a friend who wanted a low profile hitbox that worked with his switches. It has 14.05mm square holes that fit tightly with Gateron's mechanical switches. It is specifically designed to make use of a RP2040 Zero that can be hot…
This is a 3D printable shell for DIY a Hitbox. It has 15 buttons, and is modeled in such a way that the entire thing can be printed upside down and assembled without supports. There are built-in supports inside each keycap hole, however…
Bill of materials 1 unit - Kit Titan Aero Volcano (you need select your voltage. Original votage 12v) 1 unit - Fan 5015 (you need select your voltage. Original votage 12v) 4 units - Bearing LM8UU 9 units - Insert Nuts M3 L3
30mm buttons for the top, 24mm for the side Top buttons are a tight fit and the holes will probably need some slight sanding m4 hardware is used, the brackets use heat inserts https://a.co/d/d0C8mpn the board is mounted with generic…
This is a remix from: https://www.printables.com/model/97032-dewalt-bit-box-magnetic-insert For me it was difficult to take the long bits out of the holder. Therefore, I added a slanted surface on both sides and exchanged the round 10x2…
I really love this welder but couldn't use my 4.5kg wire roll. So I designed this empty spool and divided the whole 4.5kg spool into 6 pieces of 600-700g. You'll need 3x10mm M3 screws and 3xM3 nuts to join the two halves together. There…
I designed a holder for the BitBox 02 by Shift Crypto based on the design by m0zzy
Modelled using jfedor's Slimbox models: Slimbox: hitbox-layout low profile fightstick by jfedor | Download free STL model | Printables.com Modelled in TinkerCad, printed using a FlashForge Adventurer 5M Pro with PETG at 260 degrees nozzle…
Keeping your bitcoin organized is key, and now here's the Gridfinity storage set for your BitBox hardware wallet ! It should be pretty self-explanatory. Organize your bitcoin storage however you want, space for little labes is included.…
Witbox 1 – Z axle linear rail Materials list 2 uds -- Linear guide MGN12H L=330MM 2 uds -- Block MGN12H 1 uds -- Motor T8x4 L310 1 uds -- Screw Nut T8x4 14 uds -- DIN912 M3x10 (Linear rails) 12 uds -- DIN912 M3x25 (Bed_block) 4 uds --…
Warning not tested yet i do not have this 3d printer but i know someone who owns one so he asked to redo the og feet ( see foto ) so i remodeled it on fusion it's not exactly the same but very similar. Print Settings: Material: Pla, Petg…
PTFE OD 4mm L 25.9mm cutting tool for BQ DDG extruder (Hephestos 2 & WitBox 2) Category: 3D Printer Accessories
This controller housing fits a Brook board by default, and a battery and antenna for wireless boards. It can easily be edited to accommodate other boards. The panels on the sides and back are modular, allowing for customised ergonomics…
Ich habe sowas schon sehr oft im Geschäft gesehen und habe mir gedacht, sowas kann man leicht selber machen. Jetzt habe ich die Theorie in die Praxis umgesetzt. Dachte nicht das es so schnell geht hihi. :) :)
I wanted a hitbox, made a prototype in a plastic box and then designed one to cut on 3mm Acrylic with a CNC Fits in a letter format piece of paper The flat parts were CNC cut while the pillars and washers were 3d printed. Uses standard…
J'ai apporté une petite modification à la buse 2 en 1. J'ai augmenté l'épaisseur de la cloison de 0,5 mm et encastré l'aimant, en le laissant dépasser de 0,5 mm ; taille de l'aimant + ou - 12 x 6 x 3. La surface de contact est meilleure…
Display pins are move sligthly, to allow the 0.96" to actually be used with them lul
Minimal position change of nozzle (only 1.8 mm loss in Y-direction). Requires printbed to be higher by approx. 3mm. Additional components for the hemera printhead: 12V E3D Hemera BLtouch1 or 3D touch (needs to be cut) Glas fiber mat High…
Ich habe mir eine Box für meine langen Bits kreiert. diese waren zuvor in einer Plastiktüte. War immer umständlich den passenden Bit zu finden.
Kurzer Halter für SB-Verpackungen zur Befestigung am SKADIS Pegboard. An die diesem Halter kann man verschiedene Dinge befestigen, so wie sie im Baumarkt in den Regalen hängen (sog. SB-Verpackungen). Ich habe hier z.B. meine Bitbox…
This is a remix of JFEDORs Hitbox-layout fightstick. This one has a stiffened bottom lid with mounting brackets for a Raspberry Pi Pico. This is the 218mm version.
no supports necessary easy print
Carro de bq witbox para extrusor hemera con hotend volcano. imprimir con soportes y quitar los de dentro del fan duct Category: 3D Printers
It was a great opurtunity to get to learn a bit more Fusion360
Goblins Box Yerel turnuvalarda rakibinizle klavyeyi paylaşmak istemediğinizde kullanabileceğiniz, klavye tarzı bir fightstick. Kutuda Cherry MX switch’ler kullanılır. Switch’ler modele sıkıca oturur (press-fit), ancak yerlerine…
J'ai apporté une petite modification à la buse 2 en 1. J'ai augmenté l'épaisseur de la cloison de 0,5 mm et encastré l'aimant, en le laissant dépasser de 0,5 mm ; taille de l'aimant + ou - 12 x 6 x 3. La surface de contact est meilleure…
adaptador para placa skr 1.3/1.4/2 a bq witbox en sustitucion de la ramps + relé de estado solido Category: 3D Printing
Igus T10x2 leadscrew nut for bq witbox Category: 3D Printer Parts
Edit 03/18/2018 Update v2 : _Place the foot hole in the right position. _Add large spool holder (2kg & more). _Add full model. _Add all things one by one for print only what you want. Original post : This is my firt remix/custom of two…
The model was created by me. The hitbox.io logo was not created by me and remains the property of its respective rights holder. I could not locate any published licence for the logo. The licence selected for this upload is intended to…
Created a Circuit box with 3010 fan and a open lower sections. A lid of same size with a hinge will make it a complete box. it have air vent too for air entry and exit. It is used to keep a ac to dc circuit, nodemcu circuit and a relay…
Suzuki Key Fob Replacement Lid. Fits perfectly and is optimized for 3D Printing. Fist Layer: 0.2 (for different color print) No Supports Layer Height: 0.08 - 0.16 (recommended for smooth surface) Infill: 100% (doesn't affect print time…
DIY Hit Box Arcade Controller A low-cost, fully customizable arcade controller for fighting games, built around Raspberry Pi Pico (RP2040) running GP2040-CE firmware. Full Project & Source Files GitHub:…
gedruckt mit 0.2 mm liegend, abgesenkt auf die große Fläche. der Trenner hält sehr gut in der Box.
15 Key hitbox that uses 18 total slim profile mechanical switches with or without a display cutout. I attached the raspberry pi and display by melting the standoffs on the model. Parts needed: Usb C board - Link:…
Inspired by other Kaizo Mario hitbox users' layouts, I've recreated what I'm calling the "Every-finger" layout on . A hitbox is a custom controller that looks like an arcade controller, usually with an asymmetric layout made for fighting…
just a plate for shitbox mini bikes
shitbox army licence plate made for hoverhearts mb001
KitBox is my attempt at creating a free and open platform for customizable tool cases. Core Features / Project Goals Sturdy outer Shell Modular Inserts for customizable storage Integrated handle Cam-locking buckle closure for smooth and…
Inspired by other Kaizo Mario hitbox users' layouts, I've recreated what I'm calling the "Every-finger" layout on . A hitbox is a custom controller that looks like an arcade controller, usually with an asymmetric layout made for fighting…
I really love this welder but couldn't use my 4.5kg wire roll. So I designed this empty spool and divided the whole 4.5kg spool into 6 pieces of 600-700g. You'll need 3x10mm M3 screws and 3xM3 nuts to join the two halves together. There…
