289 models
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Cup with Lid for Small Items – fits VW Polo AW (from 2017) The VW Polo doesn't offer much storage space, so I designed this simple insert for the cup holders. It's perfect for keeping coins, small change, keys, or other small items…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
Print with default settings layerheight 0.2 15% infill Inner height of the container is 25 mm and the diameter is 80 mm For a single/top container you should print a lid For the following container(s) you should print a connector All…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
100x160mm sign, with an advisory message from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You may wish to…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Spacer kit, good for use in electrical projects ( boards, mounts etc). Actual sizes Type Inner diameter Outer diameter Height variations M2 ⌀2.2mm ⌀6.2mm 3, 5, 8, 10, 12, 15, 18, 20, 25, 30, 40mm M3 ⌀3.2mm ⌀7.2 mm 3, 5, 8, 10, 12, 15, 18,…
The belt items from Factorio are ready for printing. Items share the same scale as all other official Factorio models.
Wallganizer – Modular Storage System for Small Parts and Fasteners Keep your workspace organized, efficient, and ready for any project with Wallganizer , a modular storage system designed for small parts, hardware, electronic components,…
I love Gridfinity for organising small parts in my home. It does, however, not work for larger items - so I designed a solution that works with Gridfinity and allows me to store larger items and interoperates as one of the four solutions…
I do not own this character. BlushCrunch Studio are the creators of Dandy's shop, respecting the rights of the creators. There might be a painted model of the items someday for the thumbnail. I procrastinate a lot, sorry about that. Also,…
Small organizer for small objects such as nails or screws
this models are not mine, they belong to the game Pressure made by the group Urbanshade: Hadal Division
The First of my new series ~Items From Minecraft The Bow If anyone has any questions please contact me, THop3D
📦 MODULAR STACKABLE STORAGE ORGANIZER Keep your workshop and workspace neat with this practical modular storage bin system! Designed for convenient storage and easy access, these open-front containers help organize small parts and…
The original Multi-sort sorting tray was designed for common 3D printer parts - M3 and M4 nuts and bolts and other small items. The Multi-sort V2 is designed for more variable sized objects like Lego. It has larger side chutes and…
Cylindrical Stackable Containers: Organize Your Loose Items with a Twist Download the Compatible Modular Sorting System - HERE - Product Description: Introducing the Cylindrical Stackable Containers, the ultimate solution for organizing…
These are Extras & Items to enhance your Mandalorian OpenFigure3D. Included are: Jet pack Rifle Beskar ingot Bounty tracker fob Hand (grabbing pose) The main designer is Dany Sánchez , who is also behind MiniWorld3D and the other…
Large honeycomb basket for heavy items
This is my version of a project I saw on reddit and hosted on Thingiverse. https://www.reddit.com/r/functionalprint/comments/d8vks6/homelab_move_and_organization_04_open_face_bin_to/ https://www.thingiverse.com/thing:3873672 Includes…
Basic Minecraft items (axe, sword, shovel, hoe, pickaxe) with pixelated variants. Each pixel is 10mm, which makes it easy to scale. Items are based on 16x16 grid. All edges are chamfered to avoid sharp edges, and make it safe for kids.
This is inspired by Lego sorting tray by art_fpv and Sorting Trays (new sizes) by Flow_Grisu to improve printability add deviders and few more things. Features Strong and light to print Fully Stackable Decorative outer walls with a softly…
As I had from time to time problems working with hollow made forms out of the Gallery, I prepared me some hollows that I can upload to the gallery. I hope you will find them as helpful as I.
Woggin made an interesting design whereby one can slide two 'things' onto the jaws of your caliper and then can 'accurately' measure items that have lips, raised edges, etc. Like for example brake discs. The original design can be found…
Edit - I've used this for six months now and I don't have any desire to redesign stuff. It's worked out really well! My Hakko does not come out nearly as much with this solution at hand for small projects. This is a Pinecil case I…
UPDATE: 28/01/2023 - I've added a copper coil model and a plate model. No cutout/top/bottom versions of the coil, I expect it will be too fiddley to print. Using TheSameNameTwice 's belt design, I sketched up some Circuits and Gears to…
There are no special requirements for printing the model and it can be printed with PLA.
Simple tray for your pegboard (1 inch spacing) to hold filament clips or similar small items such as print nozzles. V2: Improved pegs Print instructions Supports: Yes Resolution: 0.2 Infill: 15% If you like what I'm doing… … consider…
Meant for use with the Lucky 13 figures: Dummy 13: https://www.printables.com/model/981111-dummy-13-version-10 Lucky 13: https://www.printables.com/model/148367-lucky-13-printable-jointed-figure Easy 13:…
These are Extras & Items to enhance your Samus from Metroid OpenFigure3D. Included are: Charged energy shot, a ball of energy from the tip of Samus' cannon. Grappling beam, a jagged energy chain that lets Samus reach things at distance.…
Hello ✋ Here are various models of organizers for cotton swabs, cotton pads, and other small items. The design is (in my opinion) soft, minimalistic, and organic in shape, helping them blend seamlessly into your interior. Of course, you…
bathroom accessories
Base holder is made out of two parts, front and back. Update 20240806: There is now a V2 with mountable threads also for front and back, can be combined with old V1 for left, back and right or left, front and right mounting. Screws and…
This model contains 11 Mario Kart items. Select all.3mf to print all the models or select a specific model to print alone. All the parts should be printed with support except horn.stl and coin.stl . Layer height doesn't mater, but lower…
A simple desktop tray to organize your desktop CNC bits and other items. There are 50 1/8 inch slots, 30 1/4 inch slots and 15 holes to hold your ER11 collets. There's also slots to hold your collet wrenches and a tray for miscellaneous…
A Small Box, with a sliding lid to keep all your tiny 3d printing stuff in.
Remix of the original to fit ZT3 Pro, as the shaft is round with diameter of 42,5mm. All other parts can be used from the original.
I recently saw the new puss in boots movie and I fell in love with the scythes death was carrying so here they are as there were not that many well made working ones . Everything is double checked and clearances are met so that you don't…
About This is a modular, lightweight shelving system I designed and printed for my home office. It is designed to be placed flush up against a wall. I've gone two shelves high without any fixing to the wall however you could go…
This is a modular screw/small objects organizer. With three different dimensions you can find the right size for your demands; the entire projects is scalable if too small or too big for your items. Can be also wall mounted with the hole…
I was getting impatient, so here it is!!! This is a collection of Minecraft items you can use as props, decoration, or anything else you want! I textured these models so that you can color it using manual filament swaps. Some have two…
Merry Christmas♪♪ The size of the models is different, but it is better to match the thickness to 1mm .
Die 3D-Druck-Modelldatei enthält Einfluss-Marken, Kraft-Herzen und Angriffs-Token für das Brettspiel "Harry Potter Kampf um Hogwarts". Diese Objekte dienen als druckbare Ersatzteile und können in Resin gedruckt werden, um eine hochwertige…
The other half never puts her jewellery away and prefers to sling it all in a small bowl at the end of the day. She then has to fish out the items she needs the next morning. So, I made her this organiser tray array that consists of 17…
This small pocket clip is the perfect companion for your keys or knive as it allows you to quickly acces them while keeping items secure in your pocket. Furthermore, it can be printed in under 15 minutes, so you can try this without…
Simple, but very useful in a workshop - stackable - set of boxes for small items, like screws, etc. Category: Organization
A minimalist and elegant tray designed to let wet items dry efficiently — whether it’s a bar of soap, an oil bottle, a kitchen sponge, or a safety razor. The tray features a sleek rectangular shape with rounded corners and a series of…
Print on its sides.
UK: google translate Prusa Xl Filament sensor for. Threaded Inserts M6 x 9 x 8 / PC4-M6 Quick Plug Connector Prusa XL Filament sensor "entry-fs-case.stl" change to fit Threaded Inserts M6 x 9 x 8 and where the PC4-M6 Quick Plug Connector…
Bowl for screws and small items
This model is a ruler, used for conveniently seeing what sized bins would be needed for items you want to store using the Gridfinity system. You can print in a single colour or easily paint the numbers for a higher contrast. Potential…
Clash of Clans Gems, Gold, and Elixir.
There are times where you have a small bottle that you'd like to refill from a larger bottle. While you can stick to old method of trying to very carefully balance the larger bottle over the smaller bottle I figured it's easier to just…
I've designed these modular trays sized 5cm*5cm / 5cm*10cm / 10cm*15cm / 15cm*15cm to suit most personal items so that you can print them according to your needs. The trays can be connected together using the attached U-shaped connector…
Make this shelf either in single color or multicolor like shown in photos. Print upside down with no supports and scale to fit your printer if needed. Installation is easy and uses only two nails or upholstery pins; hold shelf firmly in…
For the rod between the hinges, simply take a piece of filament and push it through the holes (see the last picture). For more cool stuff, check out my channel: https://www.printables.com/@FirstLayerDesign have fun !
Stackable project box or small items box with lid and 4 different compartments. An edge running all the way around the bottom snaps easily into the box underneath. There is one box without subdivision, one with longitudinal division, one…
Sieves for sorting items based on size. They are designed based on Gridfinity bins, with a flat base efficient based to save on filament. They stackable to allow for layered sorting. We designed these to sort out some cat food as the cat…
Elegant and minimalistic organizer with a stylish arched design – perfect for displaying small cosmetics, lip balms, jewelry, or desk essentials. With five compartments of different sizes, it fits everything from hair clips and rings to…
Printed in PLA in High Quality 0.1mm. The red one doesn't require a high density of infill (5~10%) while the blue one does (10~20%). I have planned to make the Full and 1up ones. Printed on Ender 3 S1 with filament change. The supports…
Here we have interlocking containers that can be arranged and stacked to organize parts, medicines, supplies, etc. For example, a tray 7 columns by 3 rows could organize AM, midday, and PM medicines for the week. Common uses include…
Main Print Page Color sequence: Primary Color Purple (Epic Items) Green (Events) Red (Items) Silver (Mine Events)
Some plugs, like those used with DustBusters, can be difficult to handle because they lie flat against the device when inserted, leaving little space to grip them. This design solves that problem by using two rings. The smaller ring holds…
Party decorations for photo booth
Ablagetasse / Sortiertasse für Werkzeug, Teile oder andere Sachen. Höhe 30mm. Größte Tasse 358 x 258 mm. 38 Teile in 38 verschiedene Größen. Zum Verstauen ineinander stapelbar zur Platzersparnis. …………… Storage tray/sorting tray for tools,…
I design accessory mounts for Nerf blasters, and printed blasters. I use a matrix mounting, and these a the common mounts to re-print if needed. Uses M5 or 10-32 nuts as listed, and the appropriate machine screw for the length of your…
We’re wrapping up the week with a brand-new 100 Hidden Halloween Items Challenge , complete with its printable PDF ! 🎃🕸✨ Pair these little items with our brand-new Halloween Cauldron Container ! Print these 100 spooky little items—skulls,…
This collection includes a wide variety of low poly food items ranging from fruits and vegetables to snacks, drinks, and meals. Designed with simplified geometry and clean proportions, these models are lightweight and versatile, making…
Print Settings Printer: Bambu Lab P1P Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: PLA
Screw organizer, box for screws and items. To assemble, quick and easy assembly.
The model comes in two parts. The ‘base’ requires you to pull out the little rubber mat in the console. It has three pins that loosely secure it in place (I didn't want a pin to break and prevent the mat from going back in). The top…
So, when the bin you've been using for the last several years gets tossed because it was empty and batteries no longer come in plastic containers anymore you need to solve the problem as you don't want to change your habits. Result: I…
This practical container for the keychain offers space for small items such as allergy tablets or other daily necessities that you want to have with you. The container has a filling volume of 3.753 cm^3
The two sizes included are the sizes show in the photos. The larger one can be used to hold things like pens and pencils, flowers, etc. The smaller ones are just fun. All of the items are of the smaller size, but any of these models…
description I revised the shelf for small things, I decided that it can be hung on a vertical surface such as a wall or pegboard. For installation on a table, it is enough to print without suspension. assembly 1. We screw the racks to the…
Designed this to display a treasured item and thought it might work for others. Should be easy to print with the flat base and no steep overhangs.
I needed a small box to attach to my keys to store some latex gloves in case I needed them quickly. The design is fully parametric, you can change every dimension of the cylinder, remove the text and the texture on the lid, change the…
This is a remix of the fantastic Photo Box game inserts created by Gut Shot Games. I created this insert as an open area to store things like dice, pencils, pens, draw string bags, or any other miscellaneous items. Made specifically to…
Target has been selling a Minifigure Astronaut Plush here: https://www.target.com/p/lego-174-collection-x-target-minifigure-astronaut-plush-blue/-/A-82717998 Here are some scaled items that your space man can hold. Requires super-glue to…
Box with slide lid for beauty products, small items or divers. 3 different versions with 9 variants each and 3 different lids in 2 variants I printed it with Prusament PETG Jet Black filament. Additional notes Please support my work give…
This is my second 3d model uploaded here. Made with sketchup, by me, so i can practice 3d modeling. Its pretty bad so dont expect anything. Maybe i will get better as i make more models and practice 3d modeling with sketchup/
I planned to print with ABS on the XYZ Davinci 1.0 PRO - so I designed with a good margin. In a more precise printer, the drawers may be a bit loose.
I keep my filament dry by storing in a plastic container. These models are used to dispense the filament to the printer
I went, uh, slightly nuts with the Bauhaus Tray system and decided I wanted a dedicated spot for everything on my nightstand. There were a few items the original set and existing expansions wouldn't accommodate, so I designed holders for…
Size: 5x2x3 Printed on PLA, 15% infill, 0.2mm layer height
Small screw box for parts, and other small items in tool box or office
Simple solution to organise many different things. These are very common in shops. And I could not find one that was ticking all my boxes, so I designed this. You can easily set this up so it will fit anything that you want to store,…
This model is used to store the monster, condition, and starting items mini cards for Arkham Horror 3rd edition. I designed this to store all of the cards from the base game and all current expansions, with a little space for more cards…
I designed a tech power frame marker and a player bits holder. No supports needed. Enjoy ;-)
Designed for mounting on a wall, or attach to slatwall with adapter. Can also stand on it's own. Dimensions: 3.5" L x 2.3" W x 3.9" T For slatwall mount, use my 3.25" slatwall adapter…
This hook fits on a standard DIN rail. I designed to fit with other accessories mounted on the DIN rail (see Support for Dyson vacuum cleaner attachments). The DIN rail may need to be fixed to the wall with spacer to give enough clearance…
Love Jack's original design. However, I try not to fight with our old lathe and plaster walls by screwing things into them. I did a super down-and-dirty remix in Bambu Studio to fill in the screw hole and mesh the parts together.…
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Itemcounter for Munchkin I liked the clickyness of the original model, but it was too big. You need one of each piece: 1 top 1 bottom 1 left dial 1 right dial You can choose between the Norwegian or the English top Get the dials/wheels…
These boxes are 40mmx40mm based. They come as 1x1, 1x2, 1x3, 2x1 and 2x2. There are 9 positions in the drawer so any combination that makes 3x3 will fit. Lip on the box is for attaching the label. All boxes are printed as 0.2mm layer with…
A few simple models to add to your Lego or other toy crane set. Designed with a 4mm hole for the crane's hook. The I beam prints without support on end, the wrecking ball is best printed with support.
Organize in Style: The Modern Hexagon Valet Tray Transform daily clutter into a curated display. Designed for the discerning individual, our valet tray’s sharp, architectural lines make a bold statement on any desk or nightstand. The…
Designed for Band aids, it is about 1 3/8" W x 2 1/8" H x 6 1/8" L on the inside. The sidewalls are about .1" thick to prevent deflection and the dividers slide easily into the 6 mounting positions. Print as many dividers as needed. No…
