The source marked this model as adult content.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
- Downloads
- 8,078
- Likes
- 3,808
- Rating
- 5
6,855 models
The source marked this model as adult content.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Simple honeycomb end pieces I made for a monitor stand. Dimensioned for 1.5 cm thick plywood or similar. About 17.5 cm deep. I uploaded a version without and two versions with brackets. I also made a middle brace that can be put in the…
Print approx. €10.00–€12.22 excl. taxPreliminary estimate for PETGSource material: PET
GOAL : Mount a display (phone in this case) below the monitor in my home office. This display shows my agenda, provides controls for lights, AC and shows temperature/time. In the (near) future it will provide more controls and info.…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
Print approx. €3.56–€4.36 excl. taxPreliminary estimate for one variant
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
If you like my work please support me. :-) Buy me coffee at ko-fi.
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle…
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for PETGSource material: PET
I modified the "R6" Extruder parts that come with the Mk3s+ printers to work with the Slice Engineering Mosquito Hotend. This is only compatible with the 40mm fan. I left a "vent" in the Extruder Cover part. I don't know if this is…
Print approx. €6.40–€7.83 excl. taxPreliminary estimate for one variant
UPDATE 07/29/2020: RevB is posted. Please note RevB parts are incompatible with the original ones. Carriage Updates: Reworked profile to not interfere with the smooth z-rod. Duct: Optimized airflow, better angled the side outlets to hit…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Simple Blank Keychain, luggage tag, whatever you need. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer: Creality ender 3…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This little beast is completely functional and complete overkill for a Ukulele! The extended scale length for the lower strings makes for improved tuning stability even at lower tunings without the need for heavier strings, meaning this…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A mount i made for my eye tracker 5 to mount on my Samsung G7 monitor. This mount allows you to still operate the joystick/power button. The large center de-boss is to aid with aligning the camera module, and the notch is there to help…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
NOTE:This is an update version 1.2 -Better control of Hotend fan airflow to reduce airflow leak towards the print surface. -Address the issue of airflow from the print fan hitting the hot block. -The X-Carriage is optional Slice…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Triton and Naiad. Added UV Details and Large Cavity In Center of Base. gcode includes color change stop so you the head will pull away and give you room to add BB's to the cavity. The BB's should add enough weight to way this down in a…
Print approx. €10.88–€13.30 excl. taxPreliminary estimate for one variant
07/25/2020: I have created a cooling upgrade for this mount: https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud I really liked Woraphot's design however I wanted something that fit the Original Prusa Mini hotend…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
Un organizador con cajones para mantener un poco mas ordenado tu escritorio
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Soporte tipo lámpara para cuatro litofanías con luz led en la base. No requiere soportes. Fácil de imprimir.
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for one variant
Some Keystone wall plates have thicker retaining bars, such as Leviton Commercial. This remix accommodates this. The file that this was remixed from did not have enough clearance for Leviton's thicker retaining bars which caused the…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This model is created for new models of the Philips Avent Baby Monitor, which can be mounted on crib. Models: SCD923/26 SCD921/26 SCD973/26 See also compatible Tripod Mount holder with the top cover od Crip Holder.
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
Organizador de escritorio
Print approx. €18.47–€22.57 excl. taxPreliminary estimate for one variant
Leviton Structured Media Cabinet Bracket for UniFi Switch Lite 16 PoE. Print instructions Recommend using Supports to support the lip that holds the switch.
Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant
Having found a monitor stand design that I liked, I wanted to make it more flexible, and so I added brackets for a second level. My model uses a shelf I had lying around, which was 16mm thick and 170mm wide. I cut it into two pieces to…
Print approx. €5.10–€6.24 excl. taxPreliminary estimate for one variant
Eine alternative Babyphone Betthalterung für das Babyphone Philips Avent SCD845/26. Sollte die V.1. einen zu steilen Winkel haben kann diese an der ggü. Seite des Babybettes installiert werden. See also my other bed mounts:…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Alternativer Würfelhalter für das Brettspiel Cubitos Alternative dice box for the boardgame Cubitos
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This tool is made to be as compact as possible and so it takes the level of detail the Prusa Mini with the 0.4mm nozzle can produce to the edge. Design The features that are included are: Metric screw length rules Metric screw diameter…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Hi, Finally something I can contribute! Maybe someone recognises the following situation: You want to play you favorite PS5 but the TV is occupied by our significant other. Luckily you have a nice PC monitor on an arm that you can hookup…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
Webcam Step: Elevate Your View Modern technology has gifted us with sleek, thin-framed monitors. While these technological marvels enhance our workspaces, they also present a new set of first-world problems: webcams dangling into the…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Bola de Navidad Es una bola diseñada para insertar una imagen de una litofania. La bola es una semiesfera con un agujero trasero para insertarle una luz led del árbol de navidad y poder disfrutar de la imagen en el árbol. Impreso en PLA…
Print approx. €2.74–€3.34 excl. taxPreliminary estimate for one variant
Support holding the monitor's weight if the monitor stand does not work correctly. The dimensions are 130x29x20mm. The dimensions can be altered in the slicer to suit your exact needs Print instructions: No supports needed Infill:…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant
This two Ozito battery holders are a result of printing the original file only to find that the double holder does not accommodate two 18V PXC batteries side by side. I printed the original make on my Voxelab Aquilia X2 with the model…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
Volvano mosquito repeller, special to spend summer afternoons in the garden without mosquitos. The base was redesigned to have a bolt to pin the mosquito repeller. The volvano was rescaled to fit the spiral in the interior. Printed in…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Printed with 100% infill. 0.2mm ABS or something non brittle material.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Luego de imprimir se puede colocar en la parte posterior una iluminación tipo led. La litofania de tamaño 10 x 10 se coloca con pegamento en la parte frontal. No requiere soportes.
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
If you have a Eufy E21 baby monitor camera and place it on a flat surface, you'll find the camera can't look all the way down. The camera can pan all the way up at the ceiling, which means you're wasting most of it's range of motion by…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Wo ist doch gleich meine Bildschirmbrille. Klar doch - auf dem Monitor. Damit ich das sagen kann, habe ich mir diesen “Brillenstuhl” gedruckt. Er ist für eine Monitorbreite von 28 mm ausgelegt. Falls ihr eine andere Breite benötigt,…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…
Print approx. €2.98–€3.64 excl. taxPreliminary estimate for PETGSource material: PET
Need a cost-effective 3D-printing service? Are you in need of support or a specific adjustment? Send me a message, I am here to help. --------------------------------------------------------------- To guide the cables running from your…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is an enclosure for my build of the Antique Wireless Association Capacitor DC Leakage Tester. The bare board can be purchased from their website. I was able to get the electronics parts from Digikey. If there is interest I can add…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
un osito miniatura
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Hey kids, we've got a Space Age arts and crafts project here inspired by a cool project by Qrome and NASA Mission Control! This design would not be possible without the work that Qrome ( https://www.prusaprinters.org/prints/25378 ) did…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Back to the Future Flux Capacitor coaster! Can also be used as a display stand for your BTTF figures! Just follow the settings picture for when to change colors or use the enclosed gcode file. Happy printing!
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Flux Capacitor Atmos Cooler Badge.
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for one variant
Simple, fast to print Lightweight front sight for Reximex RP (MITO). (original shroud removed to save weight). Customizable height with changeable inserts. Meant to be fastened by small headless screw M3 x 4. (probably any long enough M3…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Raised nut and bridge for the Headless Baritone Ukulele
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
Molecular surface representation of the bovine mitochondrial ATP synthase state 1b PDBID 5ARE. The chains were grouped and printed so that the main structural components are visible: F0 in green; F1 in blue; axle in red and stator in…
Print approx. €3.87–€4.72 excl. taxPreliminary estimate for one variant
Angelito para primera comunión
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Es un bonito carrito decorativo. Para colocar una pequeña planta o para lo que se nos ocurra o simplemente como elemento decorativo. Espero que os guste
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
A wall-mountable holder for a 38mm (max) diameter handle of a mosquito zapper. My zapper is 36mm diameter and it fits comfortably with a bit of wiggle room. Probably could go to 38mm, or else you can just make it a bit larger in the…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
I find myself putting my headphones on the floor a lot, so I made this hook for my monitor that I can rest my headphones on. It hooks over the top of the monitor and the headphones hang behind the monitor. It will not fit all monitors. I…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
This cradle holds the Ferrex M7 multitool, a small dremel clone sold by ALDI in Germany. You can extract it from it's holder by either grabbing the tool from the middle, or, if that is easier for you, by pushing down on the spindle in…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Pieza de repuesto para gancho de mosquitera. Print settings for my Kobra 2 Neo: Layer height: 0.1 Print velocity: 10mm/s or 20mm/s
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
Print approx. €13.33–€16.29 excl. taxPreliminary estimate for PETGSource material: PET
Upgrade your BenQ XR3501 setup with this custom-designed monitor mount, for stability and a clean fit. Unlike many mounts found online, this design allows you to keep the monitor’s rear protective cover installed while providing a solid…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
This girl looks like she stepped right out of a Junji Ito manga—big, unsettling eyes and a twisted grin that scream trouble! Her half-finished "costume" and eerie aura fit perfectly with Ito’s signature blend of creepy and bizarre. Those…
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant
Martinitoren Groningen
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
EN: Yesterday, the connection piece of the hose of the above-mentioned blood pressure measuring device broke off. A replacement was needed. Here is the result. It works. Could be that it also fits other devices. The inner diameter…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Broche nudo infinito Rombo
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Broche nudo infinito Triangulo
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 with enough space for capacitor (e.g. Tarot AIR 20A). For version without capacitor see this model .
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
For those not running the "Smart" batteries in their Axial SCX6 trucks; here is a battery monitor mount that you can put in one of your side windows (in my case passenger rear) so that you can monitor your battery voltage. You'll need: 2…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A mount for a Michelin motorcycle tyre pressure monitor / gauge The clip is a separate part so it can be made to fit different circumferences. Fusion file for the clip included. Print instructions Category: Automotive Summary A mount for…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
This project is a DIY power supply with a voltage regulator inspired by the flux capacitor from Back to the future movie. The model of the case is highly optimized for 3D printing on any FFF printer. Print instructions I had a (self-made)…
Print approx. €15.62–€19.09 excl. taxPreliminary estimate for PETGSource material: PET
Broche nudo infinito Estrella
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
UPDATE 16.1.2023 - Na základe referencie používateľa “steve” pridané dva nové modely clipu: len na šesťhranné nádstavce len na SDS Quick nádstavce Doplnkový držiak vrtákov a bitov na mieste umiestnenia brožúr. Potreboval som nejaké…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Ein Standfuß für den Monitor Acer GN246HL. Er ist 23mm hoch und hat eine leichte Neigung von ca. 3°. Er ist an den Fuß angepasst und dient zur Erhöhung um auf die Höhe eines anderen Monitors zu sein. Er wurde liegend gedruckt mit weißem…
Print approx. €9.03–€11.04 excl. taxPreliminary estimate for one variant
it is a cherry mx style keycap that is perfect for a keyboard with back lights. The intention was iron mans arc reactor but now it also kind of looks like the illuminati logo.
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
About I needed to install Athom Power Monitoring Mini Relay for ESPHome, so I quickly designed one. This was designed to be screwed into the wood plank, the distance between the external holes fits into a grid 20x20mm lines, holes for 4mm…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
I bought my “ Display-H ” from aliexpress, and the legs that came with it didn't work well for me, since the angle made the monitor hard to see from certain angles, so I threw together these replacement legs which hold the monitor stable…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Saint Benedict made based on a scan of one of the old pictures in my collection. To develop this particular lithophane, I used the software from the website: https://tool.itslitho.com
Print approx. €30.12–€36.81 excl. taxPreliminary estimate for one variant
Radon is a chemical element; it has the symbol Rn and atomic number 86 . It is a radioactive noble gas and is colorless and odorless . Of the three naturally occurring radon isotopes, only 222Rn has a sufficiently long half-life (3.825…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
Yet to print, just hosting on printables for more backups of my models
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for PETGSource material: PET
Für unsere Bonsais brauchten wir ein Regal auf dem Balkon. Die Regale sind oval, innen ca. 25 mm tief und haben die Innenmaße 170x130 mm bzw. 190x150 mm. Die Befestigung erfolgt über eine Klemmvorrichtung am Balkongeländer. Das Rohr hat…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by https://www.printables.com/model/1042882-pvm-20m2mdu-speaker-mounts but for Roland and Boss MA-12 monitors. Recommend only these models as they are magnetically shielded. There are a number of Boss MA-12 variants so ensure…
Print approx. €6.40–€7.82 excl. taxPreliminary estimate for one variant
I want to make a dust shroud to protect the router in the router table from dust so I started by modeling the body of the router and making a cylinder clamp to attach to it. I made one with a relief hole for the power cable that can sit…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
I had an old tv cable box above the crib and so wanted to hang the baby monitor up there and hide all the cables. I used PLA, 100% infill with supports. I wanted it to be as strong as possible to hold the monitor. There is a small (1mm or…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Description To ensure the timely replenishment of my pet bird, Peanut’s, water supply, I devised an electronic project. Previously, I would often forget to check on Peanut due to his ability to go days without water. This project aims to…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I have a cable that I only occasionally use to connect to my monitor. As I do not need the wall mount of my monitor I created this cable reel that can be screwed into the back of the monitor to hold one or multiple cables. The cable reel…
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
Der kleine Halter hat sich als nicht stabiel genug erwiesen. Die Klammer ist über mehrere Tage an den Drehpunkten eingerissen und der Monitor langsam abgesagt. Deshalb habe ich die Klammer nun nicht mehr seitlich sondern hinten…
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
I like to have a thermometer in my office to monitor temp and humidity (for filament and otherwise). Wanted to declutter my desk, so made this simple mount for a ThermoPro Thermometer/Hygrometer to sit on top of my Gigabyte monitor. Uses…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
This model is designed to use this monitor from Amazon: https://a.co/d/0rkTGwB And this cold shoe adapter: https://a.co/d/13R9GcO I use this phone tripod mount to hold the phone and to provide the front cold shoe to hold the monitor…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
A bracket that clips onto the top of a monitor and holds an Audio-Technica AT2020 horizontally above it. Fits monitor edges up to 14 mm thick. No hardware required. Comes in two variants depending on which side you want the cable to exit:…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET
Een speelgoedje van uit de oude tijd maar dan in PLA plastiek. Het best gebruik je een nylon touw dat kan je aan de voorkant warm maken en een puntje aan duwen. Zo kan je het touwtje gemakkelijker in het gaatje steken. An old-fashioned…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Žáci po návštěvě chomutovského lesoparku nafotili zvíře, které můžeme najít i v Asii a vyhledali. Poté v programu zkontrolovali vše potřebné pro tisk ve 3D tiskárně.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Žáci si navrhnou, vymodelují a vytisknou cedulky označující místa, kde zakopou vybrané odpadky. Následně, díky cedulkám, tyto odpadky znovu vykopou a budou zjišťovat stupeň rozkladu daných odpadků.
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
Choose 9 attachments to print and assemble this multitool. Print Lower, Upper, 2 Nuts, and 9 spacers. The nut is hard to screw on with hand, use a tool if possible. Print threaded parts in high-quality settings. (i used 0.16mm layer…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Introducing a complete set of modular components that enable you to build a beefy, strong, full desk organizer set and monitor stand. This organizer finishes out at about 4 3/8 inches tall and 8 inches deep. The set includes a "narrow"…
This was a 3d scan of a figure from the game assassins creed.
needed a quick solution to get headphones off of monitors. BOOM! move it slightly to the right. (or left if you mirror it :) My headphones have a 30mm headband, so that's what this one is made for. [find enclosed the f3d file for…
I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…