34,091 models
The Trivenger is a very acurate and easy to thorw boomerang. The flight is very stable, with a fairly high trajectory. The bommerang brakes very well on the return which allows it to be easily caught, even with a finger. If you are…
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
A very nice F1 logo for your desk or shelf. The logo and its stand are designed separately, so you can print it in 2 colors. The parts are snap-on in order not to have any problems with alignment. But my advice is to glue the pieces…
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Larger sizes: https://www.printables.com/model/1200632-universal-bag-clips-xl
tested with 0.2 layer hight, works great! #UPDATE 16.08.2022 Added Gcode for MK3S+ with Arachne Perimeter Generator
Henry - commonly called Hal by his friends and locals of Skalitz, or occasionally Henry of Skalitz - is the main protagonist of our game Kingdom Come: Deliverance . We prepared a 3D printable version of Henry's figure. It's available both…
Würth keychain screwdriver Introducing the Würth keychain screwdriver - Your Go-To Tool on the Go! Are you tired of fumbling around for a screwdriver when you need it most? Say goodbye to the hassle of searching for the right tool with…
! After printing, remove the small supports on the hinge ! please use my gcode files for printing :)
Found with a heavy plate that I wanted to display that the original felt like the balance was off and could easily fall over when bumped. I have copied the summary from DanRom624 (original from Thingiverse:…
Festool Abrasive holder with positioning aid - simplify your tool management Where do you currently store your abrasives? Print your own Festool abrasive holder with positioning aid and make your everyday work easier and more productive.…
Decorative rose, printable on filament and resin printers, no supports required.
I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…
Decorative Gothic Dragon Door Knocker ** THIS IS NOT FUNCTIONAL ** no moving door knocking mechanism. it just looks like it.
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
Wanted to print a candy bowl, so I decided to go with a simple shape, and play around with the settings in PrusaSlicer to give it a cool and unique look! This print has no top or bottom layers, and no perimeters on the inside of the bowl…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
alpokemon did a great job modeling the outside shape of the 'Among Us' characters ( https://www.thingiverse.com/thing:4595212 ); however, the joinery I felt could use some improvements. I changed the Legs, Heads and Guts. The major…
Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °
We had mice show up in our house for the first time and my wife wasn't a fan of killing them. I first saw this 140+ year old mousetrap design on YouTube and then a make someone had done as a 3D print on that other site. I came up with my…
To reduce the gap between the wall and my tablet frame, I created a specific Quad Lock universal wall mount with a height of 8.8mm.
The disk inside can rotate in 45° increments for maximum hanging options. This version is uses less material and is a little slimmer
Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…
- ENG - This is my first print I upload to Printables.com, it's a simple and minimal USB holder that has 8 USB slots, I didn't find anything I liked online so I created it. The USBs have an offset of + 0.4mm on each side to prevent them…
I wasn't satisfied with the default Honeycomb Storage Wall inserts; they're press-fits, so the tolerances need to match perfectly. This is a problem when printing with larger nozzles/extrusion widths (which I do frequently for speed) or…
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
BNSF diesel locomotive toy train (BRIO / IKEA compatible) You will need the following screws to put everything together. 14x ISO 14585 (DIN7981) 2.9mm x 13mm ( https://amzn.to/3WgKty1 ) 2x ISO 14585 (DIN7981) 2.9mm x 19mm (…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Extrusion machine which allows plastic bottles (PET) to be recycled into printable filament for a 3D printer. I have made a guide in .pdf format, which summarizes all aspects of the machine with information.…
This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…
Update 2023: Bought an MT8 and added a fitting for it here. --- You want to customize your Magura MT5/MT7/MT8/MT Trail Calipers without spending a fortune on those expensive plastic rings? Look no further, this model has you covered.…
Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design, and now dual sided to allow for even easier use. Version 2, added on May 4, 2021, incorporates a…
Key cover with customizable text that uses inserts to work with almost any key . Wall-mounted holder for 4 keys keeps all your keys together. Now includes INSERTs for Schlage (SC1, SC4, SC9), Kwikset (KW1), and Hudson keys as well as a “…
A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…
A relatively compact way to store lots of flash drives and SD cards. The top holes are great for full sized flash drives, while the angled slots are perfect for small USB devices such as WiFi & Bluetooth adapters, game controller…
IMPORTANT NOTE: As user GamerGuy95 reported, this does not work in Cura. Theoretically, there could be some way to make it work, since Cura does allow for mesh modifiers; but in practice, I don't know. I haven't used Cura for ages, since…
This is a fully printed and adjustable portafilter distributor for my Sage Barista Express machine, which uses a 54mm portafilter. You need to print it in .1 or less to get the threads working correctly. Use the step file and seperate the…
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…
Magnet of the University of Texas Longhorns Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to orange
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Repost of "The White House - Executive" by MakerBot ( https://www.thingiverse.com/thing:461235 ). It slices at 100% scale in Creality Slicer and fits on my Ender 3 without a skirt. I printed it at 50% scale at 0.2 layer height at 50mm/s…
The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…
Maximize your cabinet space and keep pan lids organized with these convenient holders. Designed for easy installation on cabinet doors using double-sided adhesive tape, these holders eliminate the need for drilling, preserving your…
The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…
Isolation Bearing floats to keep Z axis supported but does not translate vibrations to motion path. You can watch and see the movement of the drive screw as the Z is travelled. Bearings cost about $1.05 ea Traxxas 5118 8x16x5mm…
I really like to see the automatic Z correction doing it's job during prints. To see the tiny movements of the Z correction (Is it working? Is my bed level?), you can just clip this print to an unused part of the leadscrew. No tools or…
Another Baby-Groot this time with a Live Long and Prosper Hand (aka Mr. Spock Hand) lctexas ( https://www.thingiverse.com/lctexas/ ) asked me via PM if i can do a version with this hand for his daughter. Of course I can do it :D…
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 1 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
Advised to print the small one first :)
I added a hole for the LED indicator, i also added the wireless charging symbol on the bottom side of the case and the text with the name of the product on the top. I recomend printing with PETG because PLA isn’t as flexible, the…
A compact and efficient mini universal bottle cap opener designed for everyday use. 🧴 Works with most PET bottle caps in the 27–35 mm range ⚙ Stronger, lighter, and faster to print than the original version 👌 Fits easily in a pocket,…
You can now easily adjust your Z. It is a square printed in the center of your Mini or Mini+ build plate. Print it with the stock 0.20mm QUALITY setting. I uploaded the STL and GCode.
This is a five gallon bucket opener, used to pry open the lid. Note that the .stl has a high polygon count. If you import it into prusaslicer use the simplify mesh ability to reduce the complexity and make slicing easier. The model is…
Similar to my TweakTown 24x Thumb Drive Organizer found here, this Flash Drive Organizer Holds 24 Standard USB Flash Drives but does not feature a logo. I have tested this model with the following thumb drives, but it will work with any…
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
This mini screwdriver has an inner compartment for you to store the bit - or to have a second bit, in case you decide to leave one always on. Carry it with your keys or just leave it in your bag, it's always handy to have a screwdriver at…
The easy-to-print flexible cat Jiji from the Japanese cartoon Kiki's Delivery Service For a better final effect, it's a good idea to print it in two colours (black top and bottom and white centre to show the ears, nose and eyes), changing…
Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…
Organize your drill/driver bit cases using the Ryobi Link storage system. Prints at 0.30mm layer height without any supports. Printed with OVERTURE PETG Filament (Grass Green).
I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…
This drilling jig can be used to drill holes perpendicular to a surface, a rod or a pipe. It is quite easy to adapt to tools from other manufacturers, by modifying the included STEP- or F3D-design files “adapter for your own tool”. The…
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
One issue I kept running into when slicing test stl for Live Adjust Z was that PrusaSlicer has its own strong opinions on which patch to print first. A patch often gets printed at the back of the print bed, and subsequently became…
This is the most important first print you need to print. It will allow you to Live adjust Z Hight. Very short print. In 5 minutes you will set the printer to print beautiful models. It is set to test PLA or PETG. If you use the stl,…
UPDATE 22.2.2022: added robust 3mf file - by scaling up Z axis (may help if anyone has problem with breaking the clips) For my use I needed tight clipping of the filament, so I have remixed original from JoelG (thx for the design, it is…
M.2 SSD mounting plate for DELL laptops.
Universal (Smart)Phone Stand by PBR Designs Stable stand in every orientation Should fit all smartphones (tested with Samsung Galaxy and iPhone) May not hold tablets (holds iPad Air/Pro horizontally) Printing instructions: 2 walls are…
Two universal stands for tablets and phones. Print instructions Print with 0.6 nozzle to save a lot of time :) 10% Gyroid infill.
Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…
Simple holder for Wera electronic screwdrivers.
Print as shown on the screenshot, without supports. I've used 0.4 line width, 0.2 layer height, PETG filament. The part should fit very tigth inside the holes, use some force. No screws or glue needed. It doesn't make one-hand operation…
A universal template for creating many mandalas according to your imagination. Template size 206 x 206 x 1 mm. Transparent PLA or PETG filament recommended.
I have an older Cooler Master CM 690 II Advanced that I still like a lot but it lacks space for intake fans like modern cases. These brackets allow for a 120mm fan to be mounted along with one disc drive in the 5.25" bays. This helps push…
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
Fix the toroidal inductor with hot glue so that the adapter can withstand vibrations. 2x USB-C Charger PCB with SW3518 Chip: https://de.aliexpress.com/item/4000180424469.html Includes a buck (no boost) converter, so USB-C fast charging…
Radioactive Nuclear symbol Fallout. Diameter : 98 mm. 1 mm for the yellow part, 1 mm for the black part.
Only tested with PET-G, PLA might not be flexible enough. Hole for a 6mm Allen wrench. Raised model has two small sections raised 0.6mm above the rest of the model. Print in different colour for best results. This harmonic drive consists…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
The Reference is an unresponsive yoyo, designed around Fluid Printdynamics' 3d printed yoyo spacer kit. It was created by Luftwerk's Jeffery Pang to facilitate 3d printed yoyo iteration in 2014. Kits are still available for purchase, and…
Remix of the Sega Genesis / Megadrive cartridge trays, fitting 10 positions instead of 6. Note: Some cartridges may fit snugly due to variances in original manufacturing. Don't force your cartridge into a slot.
Resized the rose to 75%. Printer the roses to 90% then did a filament change
Print a piece of Space History Size : 228.6mm x 152.4mm x 1.4mm (Real Size) The Pioneer plaques are a pair of gold-anodized aluminum plaques that were placed on board the 1972 Pioneer 10 and 1973 Pioneer 11 spacecraft, featuring a…
Greek Krater Koozy : Charon on the River Styx With Free bonus Obol !!! Charon: The Grim Ferryman of the Underworld Charon, a significant figure in Greek mythology, is the enigmatic ferryman of the dead, tasked with transporting the souls…
Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+
Deteriorated Bone Material or a Pile of River Rocks. Figured this could be used in a Gamefold or the ilk.
Universal Wall Mounts, mounted using screws 5mm or double sided tape.👍
Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…
Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster. We are currently producing sets for food delivery volunteers for the…
This is a simple block for storing SD cards and flash drives. Printed mine with an 0.4 nozzle and 0.2 layer height. If you print the model upside-down (with the holes on the bottom) you'll get some really perfect holes and a smooth…
