Search results: jayo

Sort order

87 models

P
PrintablesOnlyCurves

Filament reel insert (73mm Sunlu/ Jayo)

When using the Prusa MK3/MK4 filament reel holder, this insert lifts filament reels with large centre holes up so that the Prusa MK4 print head does not clip or foul on the reels. It's designed for 73mm diameter centre hole reels, which…

Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
5
Rating
4.5
P
PrintablesRockChewer

Sunlu & JAYO Bambu X1C Profiles for PETG and PLA Plus

For the person who asked for dialed in settings for Sunlu, these are the ones I use. Hope they are useful for you all.

Downloads
5,818
Likes
166
Rating
5
P
PrintablesYanneck

Bambulab AMS Cardboard Spool / Coil Adapter for Sunlu & Jayo Filament

Spulenadapter für Jayo & Sunlu Pappspulen, um diese im AMS von Bambulab zu nutzen. Dieser Adapter läuft in meinem AMS bereits seit mehreren Spulen problemlos und lässt sich in etwa 15 Minuten pro Seite (inklusive Kalibrierung) drucken.…

Downloads
1,871
Likes
168
Rating
5
P
PrintablesKSB

JAYO AMS cardboard_spool_ring for Bambu Labs AMS P1P X1C

JAYO cardboard spool ring for Bambu Labs AMS P1P X1C. Had to extend the outer ring diameter giving the spool a 5mm lip. Moves smoothly in AMS. Added a TPU version for when the roll is light and PLA slips. All version will make the rolls…

Downloads
672
Likes
119
Rating
4.4
P
PrintablesPurist3133

JAYO spool adapter for AD5X (73mm to 54mm)

Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…

Downloads
588
Likes
40
Rating
5
P
Printables3DPrintsMom

Jayo Cardboard Spool Adapter for AMS

Remixed for Jayo cardboard spools for the Bambu Lab X1 AMS system.

Downloads
524
Likes
52
Rating
4.92
P

JAYO AMS LITE SPOOL ADAPTER (PLASTIC SPOOLS)

Hello everyone, we have created a adapter for the AMS Lite system from BambuLab. The adapter allows you to use the JAYO PLASTIC SPOOLS on the AMS Lite. PRINT PARAMETERS: Print example: see "Makes" Filament: Anycubic PLA Matte Black…

Downloads
521
Likes
21
Rating
4.67
P
PrintablesDesignCraft

JAYO Bambu Lab AMS Cardboard Spool Adapter Ring

This model widens one side of the spool ring adapter to stabilize a JAYO 1.1kg 194x59mm cardboard spool while it rotates within a Bambu Lab AMS. Features: Reusable JAYO nameplate for easy identification when reusing Instructions: Print…

Downloads
461
Likes
56
Rating
5

New JAYO Cardboard Spool Ring Adapter for Bambu Lab AMS

Hi makers, I present to you the remix of @plomdawg's efficient design for the new 2 and 4 hole group spools that Jayo is using recently. It is a very economical minimalist design. Barely 13.5 grams printed at 100% infill. This is a design…

Downloads
446
Likes
59
Rating
5
P
PrintablesJack Siegel

Cardboard Spool Adapter JAYO

This is a Adapter Spool for Cardboard Spools with 650gr (2,2lb) and NEW: with 1kg spools. For Example of the Brand JAYO on Amazon, bit it should work with any Cardboard spool with the dimensions: inner diameter: 53mm outer diameter: 176mm…

Downloads
372
Likes
44
Rating
4.6
P
PrintablesTheKwijibo

JAYO Cardboard Filament Spool Adapter for Bambu Lab AMS

Spool Adapter for Jayo Filament cardboard spool for Bambu Lab AMS. *remixed* Diameter of this spool remix is 175mm

Downloads
371
Likes
30
Rating
5
P
PrintablesKubicats

JAYO Cardboard Spool Adapter for AMS

Adapter ring for Jayo 1.1kg cardboard spools with an outer diameter of 194.5mm to be able to use them in the AMS. The adapter ring fits tightly on the spool and it runs very well in the AMS. You can use the normal version, or the “long”…

Downloads
358
Likes
45
Rating
4.75
P
PrintablesChinaquads

JAYO 1.1kg AMS Cardboard Ring 200mm for Bambu Labs AMS

Cardboard Adapter for the 1.1 kg Jayo Spools. Fits perfectly on the Cardboard (very tight) and in the AMS. Prints ~ 16 minutes per Adapter. Use Concentric for pattern and infill pattern. Prints much faster.

Downloads
295
Likes
42
Rating
4.5
P
PrintablesDesignCraft

JAYO 250g Bambu Lab AMS Spool Adapter

This adapter system attaches to the edges of a JAYO 250g 118x42mm spool enabling usage within a Bambu Lab AMS. Features: Reusable JAYO nameplate for easy identification when reusing Instructions: Measure your spool first to ensure it…

Downloads
270
Likes
22
Rating
0
P
PrintablesJOGIAREA

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silika / humidity + temperature Sunlu JAYO dryer S1 + silica

Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen) Benötigt wird eine M6 Mutter + M6…

Downloads
242
Likes
53
Rating
4.8
P
Printablessysteck

JaYO Cardboard Spool Adapter

Just removed the tab in the middle of the Polymaker Cardboard Spool Adapter in case for JAYO.

Downloads
222
Likes
19
Rating
5
P
PrintablesLuke96

SUNLU Spool Adapter for Bambulab, Sunlu, Jayo Refill

I designed this adapter to allow Bambu Lab, SUNLU, Jayo.. refill filament to be used on reused older version SUNLU spools. I tested several existing adapters, but most of them had incorrect locking mechanisms. The main issue is that the…

Downloads
206
Likes
40
Rating
5
P
PrintablesTinkerVault

SUNLU / JAYO spool stackable stand for organizer

Repurpose your empty spools by transforming them into a practical, stackable organizer. The organizer is designed to be stackable, and if you want to build a taller tower, simply increase the base diameter. It’s perfect for keeping bolts,…

Downloads
195
Likes
39
Rating
0
P
Printablesreimerm

JAYO Cardboard Spool Ring Adapter for Bambu Lab AMS V2.0

Change the modell that it fits to the new jayo spool

Downloads
191
Likes
16
Rating
5
P
PrintablesBati

AMS Spool Adapter JAYO

Adaptateur Bambu Labs AMS pour bobines en carton JAYO . J'ai ajouté une plaquette d'identification car j'ai plusieurs marques qui utilise les bobines en cartons et ça deviens compliquer a les identifier Imprimer en PETG , O.20 avec 30% de…

Downloads
176
Likes
13
Rating
0
P
PrintablesJOATZ

JAYO 3D Printer Filament Dryer

Modeled the JAYO dryer for building holders/mounts. This appears to be the same model as the SUNLU S1, but not sure since I haven't physically measured it. Hinge is roughed in for fitting mounts, not actual. Here is a link to dryers that…

Downloads
172
Likes
13
Rating
0
P
PrintablesFlorian Lindner

JAYO 195mm AMS cardboard spool rings

JAYO 195mm AMS cardboard spool rings

Downloads
166
Likes
2
Rating
0
P

Cardboardspool adapter for better rolling (Jayo/eSun)

Made this model so that the new filament spools that come on cardboard spools roll off better of the spool holder. Outer Diameter is 53 mm so it fits the standard cardboardspool. (Tested with Jayo and eSun cardboardspool) Inner diameter…

Downloads
164
Likes
21
Rating
5

JAYO AMS lite Spool adapter

JAYO adapter spool for AMS Lite reusable and easy to use

Downloads
152
Likes
16
Rating
5
P
PrintablesDoctorRudd

Sunlu/JAYO filament dryer stand

A simple bracket to position the dryer slightly elevated above the countertop. This prevents the surface of the worktop from heating up so much. Simply position the dryer with the rubber feet in the holes to prevent it from falling.…

Downloads
149
Likes
38
Rating
5
P
Printablesgabar5

Jayo filament spool adapter Core One

Jayo 73mm spool adapter. Prevents the spool from rubbing against the Core One housing.

Downloads
143
Likes
14
Rating
5
P
PrintablesTavoL

JAYO Spool Drawer

I used deburring tool to make bigger holes to spool. If drawer joint holes are too big or small, you can use slicer to resize caps and sticks. Printer i used is ender3 v3 KE

Downloads
139
Likes
17
Rating
4
P
PrintablesThyristor

JAYO cardboard adapter spool

Since the cardboard spools from Jayo are unfortunately not meant to go into the AMS, and so far, no ring adapter or other spool model has fit well or operated smoothly, so I created my own. The spool needs around 140 to 155 grams of…

Downloads
139
Likes
16
Rating
5
P
PrintablesGrzegorz

Simple Filament Adapter for JAYO Cardboard Filament Rolls for use in Bambu Lab AMS, P1P/X1C

Print 2x Diameter outside 199 mm (For AMS up to 200 mm) Diameter inside 54,3 mm Depth adapter 29 mm Width with JAYO Spool approx. 63 mm (For AMS up to 68-70 mm) Print it with 15% gyroid infill or without infill Approx. 45 g filament for…

Downloads
136
Likes
11
Rating
5
P
PrintablesDan T

jayo cardboard spool rings

these are cardboard adapter rings are for the JAYO 1.1KG filament spools to help with the AMS system these rings have a 194mm outer ring which fit really well to the cardboard spool and the internal plug has a measurement of 54mm I have…

Downloads
132
Likes
12
Rating
4.5
P
Printablesgabar5

20 minutes Jayo filament measure

Accurate filament measure. Prepared and sized for JAYO spools. Very fast printing - 20 minutes.

Downloads
131
Likes
11
Rating
0
P
PrintablesChris

Centering Disc for JAYO spools

I rescaled the center disc to fit the JAYO Spools as I started using them for my Bambu Lab X1C in the AMS. I couldn't find one for JAYO, so I took my Overture one and resized it to fit. JAYO is 53.8mm-ish, so I resized the Donor Spool to…

Downloads
122
Likes
6
Rating
5
P
Printablesblechbude

Adapter / Reduktion für Jayo Filament Spulen; Adapter / reduction for Jayo filament coils spools

Adapter für Jayo Filamentspulen um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa MK4 Spulenhalter ruhiger und leichter. Das Gewinde schmiert man am besten mit…

Downloads
117
Likes
6
Rating
5
P
Printablesgerrrciu

AMS Lite universal spool adapter for Jayo Kingroon Professional Lab and other

I made a universal and simple spool adapter for Jayo, Kingroon, Professional Lab and other spools with internal diameter between 68-76mm (maybe more but i don't have other diameters to test). Print it from PETG, PCTG, or other flexible…

Downloads
115
Likes
9
Rating
5
P
Printablesglabifrons

Sunlu/Jayo FilaDryer S1 filament dryer 4010 blower fan mount

(old 2021 design imported from Thingiverse) Edit 2022-01-20: * This is designed for flexible filament! Do not print in PLA, it won't work.* See the remixes if you want a rigid version.** I wanted to use a 4010 blower instead of a larger…

Downloads
96
Likes
23
Rating
5
P
PrintablesKar

Jayo cardboard spool ring for the Bambulab AMS universal fit

Print it with whatever material you like, no supports needed.

Downloads
91
Likes
8
Rating
0
P
PrintablesSzybkidruk3d

adapter for AMS SUNLU/JAYO filament spool 70mm width

adapter for spool sunlu/jayo to use with AMS bambulab

Downloads
87
Likes
3
Rating
0
P
PrintablesBroknP

Jayo Cardboard Spool Adapter Round Reusable

Since I run my spools on a rather thin rod these cardboard spools tend to either not run smoothly or lose some fine paper fibers that might attach to the filament causing clogs. Print: Layer height: 0.28mm Walls: >5 (to make your printer…

Downloads
84
Likes
8
Rating
0
P
Printablesanonymoususer

Jayo AMS Adapter

Snap fit onto the adapter, and completely covers one cardboard side to minimize dust. Edges are knurled to maintain contact with AMS. Tested with X1C AMS

Downloads
83
Likes
3
Rating
0
P
PrintablesJOATZ

Dry Box Feed Fitting SUNLU/JAYO

The existing gcode is quite fast at 31mins with a 0.4 nozzle and 0.10Detial defaults. The detail is necessary for the threads. I would stick with this gcode it worked well and the threads are already pretty snug.

Downloads
82
Likes
14
Rating
0
P
Printablesbaq

Jayo Filament Spool Adapter for 32mm pipe (for Samla dryer box)

Spool adapter for Jayo cardboard spools. It allows to mount these spools on a 32mm PVC pipe. I'm using it with my homemade filament box (dryer box) based on Ikea Samla Box. It requires some force to plug it into the cardboard so I printed…

Downloads
81
Likes
7
Rating
5
P
PrintablesZaktoria

JAYO spool drawer

Reuse your empty jayo filament spools for storage/organization. Please use the rods and caps from the original, you may need to scale them to ~95% (depending on your printer)

Downloads
80
Likes
13
Rating
0
P
PrintablesGoBlues22

Jayo Spool Adapter Ring for Passive Rewind

Created a spool adapter for my Jayo spools using the SCAD file located in the downloads.

Downloads
71
Likes
9
Rating
0
P
Printablescreateminds

JAYO Cardboard (2 holes) Spool Ring Adapter for Bambu Lab AMS

prints like the original model (https://www.printables.com/de/model/563087-new-jayo-cardboard-spool-ring-adapter-for-bambu-la ), difference, this model is for JAYO cardboard spools with only two holes (see pictures).

Downloads
69
Likes
11
Rating
0

AMS Spool for JAYO Cardboard Filaments

If you do not want to deal with cardboard spool rings, here's another solution for you. Rip off the two sides of your Jayo cardboard spool, and slide the center into the wide portion of the printed spool, and then slide in the narrow…

Downloads
68
Likes
6
Rating
0
P
PrintablesDylanRyanDesign

Centre Rim for JAYO Cardboard Spool

Rim that is press fit into JAYO Cardboard spools or other Cardboard spools that have a 54mm diameter. Thin inner contact surface to minimize friction and to keep the spool rolling smoothly. Print two Pieces, one for either side of the…

Downloads
68
Likes
5
Rating
5
P
PrintablesDroo

Sunlu / Jayo Black Plastic Spool Adapter for Bambu AMS

Created this because I noticed my Sunlu/Jayo spools were grinding into the bottom plastic of my AMS a little bit - turns out they are just small enough to fit between the rollers. Tried a bunch of options but they were all too fat so I…

Downloads
67
Likes
7
Rating
0
P
Printablesbartoduivel
Downloads
66
Likes
6
Rating
5
P
PrintablesDesignCraft

JAYO 650g Bambu Lab AMS Cardboard Spool Adapter Ring

This adapter system wraps the edges of a JAYO 650g 175x59mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable JAYO nameplate for…

Downloads
60
Likes
10
Rating
0
P
PrintablesRoland

JAYO Spool Adapter for AMS Lite

JAYO spools tend to be slightly too large for the AMS Lite. To solve this issue, I’ve designed a simple and user-friendly adapter that ensures a perfect fit. If you're experiencing compatibility issues with your specific spool size, feel…

Downloads
56
Likes
1
Rating
0
P
PrintablesVelrath

Jayor s8s , s10s

Jayor s8s , s10s

Downloads
55
Likes
4
Rating
5

Sunlu Jayo AW Filament Roll AMS weight

If you experienced a little hopping of the filament rolls within the AMS, it is maybe caused by a low filament roll weight. The solution is to increase the weight of the spool. There are a few similar models, but i was not happy with…

Downloads
54
Likes
6
Rating
5
P
Printables4:3D

Spool Weight for Jayo Coil

Debido a que cuando las bobinas empiezan a tener menos filamento son más ligeras y en el ams pueden causar problemas, he creado este modelo para las bobinas de la marca jayo. Tiene hueco para meter 7 pilas AAA. Adjunto también el archivo…

Downloads
48
Likes
3
Rating
0
P
PrintablesFilip

Jayo AMS reduction

From diameter 73.6 → 56 mm. Printed by Petg from Jayo :) Cost eficient design. Stl is big size becaose of high quality export

Downloads
48
Likes
6
Rating
4
P
Printablesrebeltaz

Improved Handle for JayOmega's Trump Lives Here Rubber Stamp

I love this stamp, but it needed a handle to fit in with all of my other rubber stamps. If you have the right color filaments, you could do a color swap between the base and the handle, but I just used Plaid Multi-Surface Acrylic paints…

Downloads
44
Likes
7
Rating
0
P
PrintablesRob van Doorn

Totally Overengineered Jayo to Bambu Lab AMS adapter ring

Totally Overengineered Jayo to Bambu Lab AMS adapter ring to fit my 650grams cardboard Jayo ABS spools. Print out the file twice, allign them in the hole of the cardboard spool and jam them in. Secure the two halves together with a ziptie…

Downloads
44
Likes
10
Rating
0
P
PrintablesDan T

jayo spool adapters for the 1.1kg filament rolls NEW SIZES 197 & 198mm diamenters

adapter rings for the jayo 1.1kg filament rolls, after receiving new rolls of jayo filament ( the ones now including filament clips ) the sizes have increased slightly so these two models have been increased for the additional dimensions

Downloads
44
Likes
4
Rating
0

Adapter Sunlu refill - Jayo spool.

Cut Jayo spool in half (hand saw), put Sunlu refill inside, join it with printed adapter, tighten with printed wrenches (2 pcs.). Enjoy.

Downloads
43
Likes
8
Rating
0
P
Printablesprtcl3

Jayo +72mm AMS Lite Adapter - Parametric

I’ve tried existing models - they‘re simply not tight enough to reliably fit on the spool and/or the AMS without slipping off, so I decided to make my own which holds better. This model features slots on the adapter to allow for using…

Downloads
42
Likes
3
Rating
5
P
PrintablesSixpack99

Sunlu Jayo Dual Purpose Spool Adapter

This spool adapter provides a inside diameter reducer for some Sunlu and Jayo spools. This is helpful if the larger diameter doesn't work well with your spool holder. I also added caps that can be used to put some weight in the center for…

Downloads
38
Likes
5
Rating
5
P
PrintablesDaniel Suhm

JAYO AMS LITE Adapter mit RFID

Adapter für die Benutzung einer Jayo Kunststoff Spule mit dem AMS LITE RFID Chip einsetzbar zur automatischen Erkennung

Downloads
35
Likes
8
Rating
0
P
Printablesnetwalk

Deckel für JAYO Filament Spule aus Pappe, für Silica Gel in Organza Beutel

VERBESSERTE VERSION: https://www.printables.com/de/model/696606-deckel-fur-diverse-filament-spulen-fur-silica-gel- Ein Deckel für die JAYO Filament Spulen aus Pappe. Diese verschließe ich damit einseitig und deponiere einen mit Silica-Gel…

Downloads
32
Likes
2
Rating
0
P

refill spool jayo filament - reused last spool

I want to reuse my used filament spool with filament refill. So I designed this adapter to transform my jayo/sunlu spool to a refill spool. I cut it in 2 parts and a thread insert adapt the filament refill to the spool. A screw secure the…

Downloads
31
Likes
2
Rating
0
P
Printablesguet david

support boite jayo

j'ai modéliser ce support afin de régler un petit soucis de traction de la bobine

Downloads
26
Likes
4
Rating
0
P
Printables20Nightfly00

Adapter for JAYO 650g roll to fit in AMS

Hello, I made an adapter for the JAYO 650g roll so that it fits into the AMS. Works great, I hope you have fun.

Downloads
21
Likes
0
Rating
0
P
PrintablesJakub Straka

sliding reduction for JAYO filament

redukce proti zasekavání filamentu.

Downloads
21
Likes
0
Rating
0
P
PrintablesInda

Jayo Spool Nut SF Core

SilencedFrost's spool can be found here . This remix is only the nut. I use Jayo spools which have a hole diameter of 72mm. Print flat face (outside) on the print bed. I used PETG, 0.2mm layer height, 0.4mm nozzle and 40% 3D Honeycomb…

Downloads
18
Likes
2
Rating
5
P
PrintablesSPEKERDUDE

Jayo Spool Drill Adapter (72mm)

spool adapter for winding filament onto Jayo Plastic spools with ~72mm ID. It's slightly undersized with the intention add a layer of tape for extra grip on the spool. the arbor is a 5/16" bolt Category: 3D Printing

Downloads
17
Likes
1
Rating
0
P
PrintablesCB

Jayo J1 Dryer Desiccant box

It uses 6x3mm magnets. The 3mf uses a DEKU setup if you intend to use it. The box was inspired by:

Downloads
15
Likes
1
Rating
0
P

Jayo Sunlu X extender

I got a direct drive for my Jayo S8+ (sunlu brand). It triggered the X end-stop too early so I designed this to give me access to the full X. Uses same screws as original.

Downloads
14
Likes
0
Rating
0
P
PrintablesJanisz112

JAYO 72.5 mm to 55 mm

Simple JAYO spool adapter from 72.5 mm to 55 mm, press fit. Compatible with Pastamatic and Snapmaker U1. Printed on: Snapmaker U1 Profile: Generic PETG Layer height: 0.2 mm Infill: 5% gyroid Wall loops: 2 Top/Bottom layers: 5/3 Raft: No…

Downloads
14
Likes
1
Rating
0
P
PrintablesCB

Jayo J1 Dryer spool support

It uses 688ZZ Ball bearings. It should have enough clearance with the default rollers in place, but it depends on the spool. I would remove them, since they aren't needed anyway. Use support blockers or painting for printing. The attached…

Downloads
14
Likes
2
Rating
0
P
Printablesblechbude

Adapter / Reduktion für Jayo Filament Spulen an Prusa XL ; Adapter / reduction for Jayo filament coils spools on Prusa XL

Adapter für Jayo Filamentspulen um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa XL Spulenhalter ruhiger und leichter. Gegenüber dem anderen Modell für den…

Downloads
13
Likes
2
Rating
0
P
PrintablesLars

Jayo Filament Spool Adapter for 9mm steel rod

A remix to change the hole to better fit a 8.5mm steel rod.

Downloads
13
Likes
0
Rating
0
P
Printableselbaaa

JAYO Cardboard Spool Ring Adapter with NFC holder

Just added a place for my custom NFC tags to use it with the Anycubic ACEpro

Downloads
12
Likes
4
Rating
0
P
Printablesblechbude

Adapter / Reduktion für Jayo Filament Spulen mit 55mm Kerndurchmesser; Adapter / reduction for Jayo 55 mm diameter filament coils spools

Adapter für die neuen Jayo Filamentspulen mit 55 mm Kerndurchmesser um den großen Innenduchmesser auf einen kleineren zu reduzieren. Mit diesem Adapter läuft die Spule auf dem originalen Prusa MK4 Spulenhalter ruhiger und leichter. Das…

Downloads
10
Likes
1
Rating
0
P
PrintablesFabiano Araujo

JAYO 1.1kg Spool Adapter for Filament Storage 2026

JAYO 1.1 kg Spool Adapter — Filament Storage 2026 This adapter was created for the newer JAYO 1.1 kg plastic filament spool for use with GunplaMark's Filament Storage 2026 system. I couldn't find a confirmed adapter for this specific JAYO…

Downloads
10
Likes
1
Rating
0
P
Printablesmkoerper

Jayo J1 PC4-M6 PTFE fitting nut and washers

Nut and washers for adding a PC4-M6 PTFE tube fitting to the Jayo J1. The nut is the same for the top and front, the washers are different thickness. The plug is optional. If you add two fittings you might want to plug the unused one in…

Downloads
9
Likes
1
Rating
0
P
PrintablesANTALIFE

JAYO J1 Filament Dryer

Simple 3D model of: https://store.jayo3d.com/products/jayo-filadryer-j1-split-design-filament-high-efficiency-drying Extruded body colours are as follows: Green: Front panel buttons. Black: PTFE tube port. Pink: PTFE tube port (mod). Red:…

Downloads
4
Likes
2
Rating
0
P
PrintablesMan01025

JAYO AMS Adapter

Simply screw the 2 part together, super easy to print due to the rounded thread. There is also a fillet on the male side to slide over the rubbers, make sure to insert the male part on the ams. I.D. -> 55mm O.D -> 72.5mm (Tapered)…

Downloads
3
Likes
0
Rating
0
P
PrintablesDaveF

Jayo J1 filament dryer adapter

This adapter for Extrutim's excellent dry box allows the Jayo J1 filament dryer, in place of the "Adapter Polydryer"

Downloads
3
Likes
0
Rating
0
P
PrintablesMario A.

SUNLU Spool Adapter for Bambulab, Jayo Refill

Adapter for an old Sunlu spool, so you can use the filament refills with this spool. Small improvement to Luke96's work, I added a small tab to guide the lower part of the spool (the part that needs to be glued). Now it's easier to align…

Downloads
1
Likes
2
Rating
0
P
PrintablesReality2

Jayo J1 Silikagelbehälter mit Hygrometer

Meine JAYO J1 Aufbewahrungsboxen stehen neben meinem Snapmaker U1, und das eingebaute Hygrometer befindet sich auf der Seite, die ich nie sehe. Deshalb habe ich diesen Silikagelbehälter entworfen. Er gleitet in die freie Ecke am anderen…

Downloads
0
Likes
0
Rating
0
P
PrintablesANTALIFE

JAYO J1 Filament Dryer Shelf

Holds two of: https://store.jayo3d.com/products/jayo-filadryer-j1-split-design-filament-high-efficiency-drying Required parts: 4pcs, M3 square nut. 4pcs, M3x30mm screw. 4pcs, M3x10mm screw. If you want to design your own JAYO J1 shelf,…

Downloads
0
Likes
2
Rating
0
P
Printables

JAYO spool adapter for AD5X (73mm to 54mm)

Simple adapter to snugly fit into JAYO PLA spools and then slide onto AD5X spool holder. Takes JAYO spool with 73mm diameter opening and steps it down to 54mm. Fits onto AD5X very snugly, so I recommend leaving adapter on the spool holder…

P
Printables

Jayo Spool Adapter Ring for Passive Rewind

Created a spool adapter for my Jayo spools using the SCAD file located in the downloads.

P
Printables

JAYO 72.5 mm to 55 mm

Simple JAYO spool adapter from 72.5 mm to 55 mm, press fit. Compatible with Pastamatic and Snapmaker U1. Printed on: Snapmaker U1 Profile: Generic PETG Layer height: 0.2 mm Infill: 5% gyroid Wall loops: 2 Top/Bottom layers: 5/3 Raft: No…