Search results: ka

Sort order

43,562 models

Collapsing Katana (Print in Place)

This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…

Print approx. €10.75–€13.14 excl. taxPreliminary estimate for one variant

Downloads
126,937
Likes
15,757
Rating
4.62

Collapsing Katana V2 (Print-in-Place)

This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Print approx. €5.42–€6.63 excl. taxPreliminary estimate for one variant

Downloads
90,134
Likes
8,641
Rating
4.6
P

Henry of Skalitz - Kingdom Come: Deliverance

Henry - commonly called Hal by his friends and locals of Skalitz, or occasionally Henry of Skalitz - is the main protagonist of our game Kingdom Come: Deliverance . We prepared a 3D printable version of Henry's figure. It's available both…

Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant

Downloads
9,292
Likes
1,828
Rating
4.92
P
PrintablesCAD-Guy

Stackable & labeled beer crate for batteries

Stackable and now also with labels: beer crate for batterie and accumulator storage. The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries These crates are to 100% compatible to my original files. The Bottom is universal,…

Print approx. €4.61–€5.63 excl. taxPreliminary estimate for one variant

Downloads
7,484
Likes
1,473
Rating
4.9
P
PrintablesSemmel

Clicky Foldable Karambit utility knife

I had old utility blades with no usage laying around until I found this awesome design . I thought a few improvements could be made, so I changed the design a bit and added “grippy” features and “clicky” flexures. You can find a video of…

Print approx. €2.38–€2.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7,451
Likes
2,379
Rating
4.88
P
PrintablesCalebTimoteo

Cute Pokemon Pot Plants - Pikachu, Bulbasaur, Charmander, Squirtle

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)

Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant

Downloads
6,500
Likes
2,486
Rating
5
P
Printablessuit

Human Skull with battle injuries (3D scan; Historiska Museet 260727)

3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…

Print approx. €29.95–€36.60 excl. taxPreliminary estimate for one variant

Downloads
3,909
Likes
802
Rating
4.94
P
Printablesmidego

Ikea Skadis Wall Mount / Fixture / Spacer / Screw adapter

Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
3,037
Likes
514
Rating
4.83
P
PrintablesNight Raid
18+

The source marked this model as adult content.

Print approx. €2.81–€3.43 excl. taxPreliminary estimate for one variant

Downloads
2,868
Likes
329
Rating
4
P
Printableshajnyon

Ikea Skadis Watch Holder

Watch holder for modular Ikea Skadis wall.

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
2,747
Likes
453
Rating
4.77
P
PrintablesCalebTimoteo

Pikachu - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)

Print approx. €6.36–€7.77 excl. taxPreliminary estimate for one variant

Downloads
2,515
Likes
797
Rating
4.9
P
PrintablesMadRajib

Karambit Spinner Keychain, with no bearing.

Printed with 0.2mm layer height.

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
2,409
Likes
148
Rating
4.83
P
PrintablesNat

Tika Alpaca (movable legs!)

Everyone loves printing this lovable alpaca by MikaYeap. I added supports to make the leg gaps print a bit nicer and gave the tail a few more parameters to hopefully help it not break and a little disk to help it print. Thanks MikaYeap

Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant

Downloads
2,223
Likes
321
Rating
4.82
P
PrintablesBuilderDadDan

4 Roll Tape Holder for Packaging and Utility Tape

This 4 Roll Tape Holder is a convenient storage solution designed to hold four rolls of packaging tape, keeping your workspace tidy and tape easily accessible. I personally use it for various types of tape, but it’s sized perfectly to…

Print approx. €3.76–€4.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,207
Likes
844
Rating
4.86
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
1,699
Likes
329
Rating
4.33
P
Printablesmranton

Electronics Sorter Box with IKEA SKADIS mount

This is a remix of Vasilas' resistor storage drawers. https://www.printables.com/model/25285-resistor-storage-drawers I've added a box that fits my needs better: Now there are stoppers, so the drawers don't fall out and I also added a…

Print approx. €16.63–€20.33 excl. taxPreliminary estimate for one variant

Downloads
1,483
Likes
489
Rating
5
P
PrintableseSeL

Fingerboard Skatepark Modular - Ramps, Rail and Stairs

Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
1,416
Likes
342
Rating
4.75
P
PrintablesJPMakesStuff

Pikachu (XL color)

This was my first time coloring something, I then printed it at 200 scale with Prusa PLA as follows… 1 = Yellow 2 = Black 3 = Red 4 = Pink 5 = (not used)

Print approx. €4.40–€5.37 excl. taxPreliminary estimate for one variant

Downloads
1,380
Likes
60
Rating
4.9
P
Printablespastaoceanfrog

Skadis - Knipex Pliers - Electronic Super Knips

Small mount for holding Knipex Super Knips pliers on the IKEA Skadis. Easy printing. Support recommended.

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,192
Likes
149
Rating
4.83
P
PrintablesHonex

CARCASSONE KARAK card dispensing tower

This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant

Downloads
1,062
Likes
136
Rating
4.9
P
PrintablesLeosprintebles

Lego Star Wars kama and pauldron

Since Lego seemingly has stoped producing kamas I decided to take it into my own hands and designd my own for printing so everybody can have the happines of having driped out clonetroopers ! The kama The kama is designd to be printed in…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
1,055
Likes
157
Rating
4.5
P
PrintablesMI175

Dragonfly (Vážka)

PLA Print instructions PLA 0,2mm

Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant

Downloads
978
Likes
149
Rating
4.82
P
PrintablesJKM

Coordinate XYZ - KUKA

Visualization of the XYZ coordinate system, including rotation of the KUKA robot axes A model created to help you orient your robot in XZY coordinates and rotate. Magnets are inserted into the model for better placement. Printing:…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
969
Likes
17
Rating
0
P
PrintablesSirMissalot

Pikachu Light Stand

I needed a present for secret Santa in my girlfriends family and knew that she liked Pokemon and Pikachu in particular. So i made her a Lamp "powered by Pikachu”. i will include my g-code file put please just use it as reference and slice…

Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant

Downloads
924
Likes
210
Rating
5
P
PrintablesCtihy

Karak / Carcassonne 4x4 tiles grid / mřížka

U původní mřížky byly zámky na můj vkus až příliš volné, upravil jsem tedy přesnost zámků, těsnost políček pro dlaždice a trochu snížil výšku oddělujících křížků. Díky moc za původní model, který jsem jen lehce dotvořil ke své…

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
799
Likes
79
Rating
4.9
P
Printablesbaph

Foldable and stackable Crate (S)

New: Adapter for stacking Crates (S) 150x100x55 mm or Double crates (S) 150x100x105 mm twice on the Palette (XXL) 242x202 mm or direct on the Crates (XXL) 240x200 mm with her top cover to be more rigid. Upgrade V6 is out ! New shape, save…

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
776
Likes
177
Rating
5
P
PrintablesJan Vejtasa

Ultimate Karak & Carcassonne tile grid holder

Catacombs of Karak is a great game full of emotions. Sometimes these emotions turn into dangerous movements and can distort cards on the table. This 4x4 grid helps with that. And oh yeah, its **stackable** and **connectable** too! You can…

Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant

Downloads
733
Likes
92
Rating
5
P
PrintablesSkovik

Blinds Chain Holder + Cover (Držáček řetízku na žaluzie + krytka)

Dvoudílný držák pro uchycení kuličkových řetízků horizontálních žaluzií. Vhodné pro řetízky s průměrem kuliček: 3,2 mm. Rozteč středů otvorů pro upevnění krytky na okenní rám: 25 mm. Print instructions English text bellow Držáček řetízku…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
712
Likes
77
Rating
5
P
PrintablesDr_Stef

Pikachonk

I know what you're thinking. Another Pikachu! There's already hundreds of models out there of this yellow electrical hamster. That is true! I made this in blender myself because the last two models I downloaded didn't work out for me, and…

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
706
Likes
126
Rating
5
P
PrintablesPavel Douděra

Pikachu 2 or 4 colours keychain

Pokémon Pikachu Keychain PLA 46min 2 colours or 4 colours changing Black, Yellow +Red and White

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
685
Likes
166
Rating
5
P
PrintablesMrRogers

Pliers Tool Holder for IKEA SKADIS Pegboard

Intro Designed for the wire cutters, side cutter, shears, clippers, snippers, and/or pliers that a hobbyist might have laying around on their workbench. Three versions so you can decide how many angle cutters or pliers you want to hold…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant

Downloads
611
Likes
60
Rating
5
P
Printablesbigalex

Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)

Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…

Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant

Downloads
578
Likes
98
Rating
5
P
PrintablesTrntl512

Stackable MTG Card Storage Box

The racks on the photo were printed using a Prusa Mks3+ material : PLA Settings : 25% Honeycomp infil with 0 bottom and top layer to reveal the infil structure. Advanced settings: 1.2mm of Extrusion width. 10h50 minutes print.

Print approx. €14.20–€17.35 excl. taxPreliminary estimate for one variant

Downloads
576
Likes
84
Rating
5
P
PrintablesMiniWorld3D

Karaiskakis Stadium - Olympiacos FC - Greece

🇬🇷⚽ 🏟 Welcome to Piraeus, Greece! 🔴⚪ The Georgios Karaiskakis Stadium (Greek: Στάδιο Γεώργιος Καραϊσκάκης ) in Piraeus (near Athens), Greece, is the home ground of football club Olympiacos. It is named after a military commander and…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
575
Likes
48
Rating
5
P
Printablesbnorick

Kailh Choc Switch Plate with Hotswap Sockets

I wanted a plate to put Kailh Choc switches and hotswap sockets into for a small project with a Raspberry Pi, but I couldn't find anything that suited my needs. I love mechanical switches and hope to use them in many projects requiring…

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
567
Likes
45
Rating
5
P
PrintablesDazus K

Curvy Kaleidoscope Easter Egg

This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant

Downloads
538
Likes
138
Rating
5
P
PrintablesPetr Albrecht

Držák na kabel adapteru (MacBook Air M2 - 67W)

Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…

Print approx. €0.27–€0.32 excl. taxPreliminary estimate for one variant

Downloads
527
Likes
92
Rating
5
P
PrintablesAllpa

Edge protector for 1" lashing straps / Kantenschutz für 25 mm Spanngurte

Edge protector for use with 1" (25 mm) wide tension belts when securing loads. Protects the edges and forms a larger contact surface. A simple version and a version with clips are available. Through these, the edge protector automatically…

Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant

Downloads
520
Likes
47
Rating
5
P
PrintablesKinimodus

Army Painter Skadis

A holder for 6 Bottles of Army Painter Bottles. Object dimensions provide clean mounting for horizontal and vertical expansion, without wasting space on your Board R1: Increased diameter of hole for bottle by 0.6mm, because some bottles…

Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant

Downloads
518
Likes
56
Rating
5
P
PrintablesXorsinhoX

Christmas greeting card SNOWFLAKE KIT (Vánoční přání sněhová vločka)

Vánoční přání ze kterého si každý obdarovaný může sestavit svou Sněhovou vločku. Tiskl jsem z PLA Prusament galaxi silver https://www.prusa3d.com/cs/produkt/prusament-pla-galaxy-silver-1kg/ Návod: *Vyloupejte a popřípadě ořízněte či…

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant

Downloads
504
Likes
106
Rating
5
P
PrintablesSkovik

Audio Cassette Box (Obal Audiokazety)

Audio cassette box. (Obal na běžnou audiokazetu.) Print instructions =EN======== Audio cassette box. Like the original box. Used thicker walls for better coherence. If you want an original size, print 99% size. I think, nozzle 0.4 is…

Print approx. €2.73–€3.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
452
Likes
77
Rating
5
P
PrintablesMigueppc

Japanese Joinery - Kanawa Tsugi

This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…

Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant

Downloads
450
Likes
70
Rating
5
P
PrintablesJRM

Ikea Skadis Wall Mount / montaje pared

Adapter to mount Ikea Skadis directly to the wall with screws and your own screw. I use it to fix the bottom of the board. You will need an M3 nut. Adaptador para montar Ikea Skadis directamente a la pared con tornillos y su propio…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
416
Likes
81
Rating
4.8
P
PrintablesDubesh

Figurka na člověče nezlob se / Ludo figure

Figurka na klasickou hru člověče nezlob se. Tisknuto z PLA a Wood filamentu.

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant

Downloads
415
Likes
11
Rating
5
P
PrintablesCobalt3D

Kansas City Chiefs Arrowhead

Magnet of the Kansas City Chiefs Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be black. G-CODE has four layer pauses: 3.8mm: add magnets 4.6mm: color change to white 5.4mm: color change to black 6.4mm: color change to…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
414
Likes
29
Rating
4.67
P
PrintablesJerry Lee

Lockable gate bolt

A lockable, or latch-able bolt for your outdoor shed, gates, or doors. Suggest to paint the body and the small plate or cover it with UV protectant spray if this is to be used outdoors. Note, I printed it with polycarbonate for strength,…

Print approx. €5.88–€7.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
399
Likes
78
Rating
5
P
PrintablesMarcel

Lenkerstopfen, Lenkerkappen Fahrrad / Bike Handlebar End Caps

Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
40
Rating
4.75
P
PrintablesTomáš Randa

Figurka k deskovým hrám (Člověče nezlob se)

Klasická figurka vhodná pro jakoukoliv deskovou hru. Materiál PLA, Podpěry NE

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
20
Rating
4.63
P
PrintablesLupo Solitari

CZ 50/70 botka zásobníku/magazine floor plate

English version follows. Náhradní botka zásobníku pro pistole CZ 50/70. Jedná se o náhradu té původní, křehké, bakelitové botky. Vytištěnou soušást přilepte sekundovým lepidlem nebo roztaveným silikonem na plechové dno zásobníku (to v…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
335
Likes
11
Rating
0
P
PrintablesDon Agus

Handguards for Kawasaki Z750S

Hi everyone. I share here my solution to provide some wind protection for the Kawasaki Z750S. As you may have already found out if you arrive here, getting handguards it's difficult, most of them don't fit properly. And if you are like me…

Print approx. €8.81–€10.77 excl. taxPreliminary estimate for one variant

Downloads
329
Likes
42
Rating
4
P
PrintablesNozzle

Cableclip Kabelclip z. B. Festool 10mm Kabel mit Fusion360 Modell

I was annoyed that my Festool vacuum cleaner has no clip for the cable. So I designed this cable holder in Fusion360 and printed it on my MK3S+. I use PETG for it and 30% infill.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
325
Likes
62
Rating
5
P
PrintablesSebastian88pla

Anschlag Block Kappsäge Alu Profil 45x45 4545 Säge Bosch

Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.

Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant

Downloads
319
Likes
50
Rating
0
P
PrintablesDirkHoefle

Skadis logitech K380

Skadis mount for a K380 Keyboard from Logitech

Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant

Downloads
307
Likes
83
Rating
5
P
PrintablesGiGo

Japanese Elemental Air/Wind Demon Oni Mask - OniKaze

The third in the Japanese Elemental Oni series - see also InfernOni , TyphoOni , Little Sakura , Little Coral , Little Bramble Wear it or display it! Meet the OniKaze (OH-nee KAH-zay), fearsome spirit of the wind. Version from the photos…

Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant

Downloads
305
Likes
44
Rating
5
P
PrintablesMouky

x-acto knife holder / Skalpell Klingen Halter

A simple holder for a xacto knife. It is designed as safe as possible, so it won't open carrying around. Be careful not to cut yourself :) Just pull the little protection ("child safety lock") down while extending the knife. IMPORTANT:…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
300
Likes
59
Rating
4.5
P
PrintablesCtihy

KARAK - věž na dlaždice / tile dispensing tower

Výdejní věž na dlaždice hry Karak upravená tak, aby pasovala do mých insertů. Pojme všechny dlaždice včetně rozšíření Regent. Víko lze zvolit: jednobarevné bez draka jednobarevné s drakem dvobarevné s podbarveným drakem (stáhněte upravený…

Print approx. €1.36–€1.67 excl. taxPreliminary estimate for one variant

Downloads
288
Likes
24
Rating
5
P
PrintablesLada Medved

Print approx. €9.07–€11.08 excl. taxPreliminary estimate for one variant

Downloads
280
Likes
32
Rating
5
P
PrintablesCD PROJEKT RED

Cyberpunk 2077 — Takemura’s Kawan-Kote

Garcia-san… Thank you. These will do. I carry much cyberware — cyber-optics to see my enemies in the dark, Kerenzikov fused with my nervous system. But not all that is new is better. In my country we have a saying. [医者と味噌は古いほど良い]; an old…

Print approx. €22.32–€27.29 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
103
Rating
5
P
PrintablesTomasekValla

Kostka na Člověče, nezlob se!

Kostka na Člověče, nezlob se. Kostka má rozměry 3x3cm. Pokud by byla moc velká, lze si ji v Prusa Sliceru zmenšit. U kostky doporučuji vrstvu mezi 0.05mm až 0.15mm, kvůli ďůlkům a detailům. Pro tisk kostky jsem použil filament Prusament…

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
274
Likes
6
Rating
4
P
PrintablesMarkus Eissler

xTool Rotary RA2 Pro S1-Kabel WINKEL

Um die empfindliche Verbindung von Kabel und Stecker am Schrittmotor zu schützen, habe ich diesen Winkel entwickelt, Er besteht aus drei Teilen, gedruckt in PETG 100% Infill, Teile werden mit Sekundekleber verbunden. *******************…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
270
Likes
34
Rating
4.67
P
Printablessam krei

stackable Hotwheels Display

Stackable display for 1:64 scale cars. Fits most models but will require re-sizing if the car you want to store is slightly longer or wider than the one's shown in the pictures

Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
47
Rating
0
P
PrintablesSzymonRychter

KARCHER FJ6 YELLOW PART + KEY

Did you broke this small yellow part in karcher fj6, now you can replace it.

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
255
Likes
27
Rating
4
P
PrintablesKazik

4 minute Universal IKEA SKADIS hook !!!

Support and Feedback: If you like the design, you can buy me a coffee here: https://www.buymeacoffee.com/kazikg Encountered any issues or have suggestions? Feel free to leave a comment below. I'm here to assist and continuously improve…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
254
Likes
54
Rating
4.5
P
PrintablesPetr Všetička

olaf aneb postav si svého sněhuláka

sněhulák se tiskne na více částí, vše se vejde na jeden výtisk. Ruce doporučuji tisknout s límcem

Print approx. €6.86–€8.38 excl. taxPreliminary estimate for one variant

Downloads
248
Likes
38
Rating
5
P
PrintablesMuad'Dib

CuttingPliers (SKADIS T-Clip)

This is an original design for holding deburring tool on Skadis boards. It can be printed without support. It needs one T-Clip by LineArcLine to fit flush, they come in two versions - one for black/white skadis boards, one for unpainted…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
39
Rating
5
P
Printableshopa

A box for treats for dogs - New version/ Krabička na dobroty pro psy - Nová verze

Improvement of the original model. Vylepšení původního modelu.

Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant

Downloads
237
Likes
37
Rating
5
P
PrintablesPavlíček

Držáček na USB a podobné kabely

…jen další z mnoha podobných…… Tiskl jsem z ASA, protože bylo právě vloženo do tiskárny.

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
227
Likes
12
Rating
5
P
Printablespr3mium.cola

Bosch GTS 10 XC // Adapterblock für Federkamm an Parallelanschlag

hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
216
Likes
25
Rating
0
P
PrintablesHiro

Chiikawa Mini Figure Stand for Prusa i3 MK3S+

Features This is a stand for mini figures of Chiikawa series. It attaches to the Z-axis-top part of the Prusa i3 MK3S+, and the figure is attached to it with double-sided tape. What is "Chiikawa" ? → Please watch the video in YouTube .…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
209
Likes
26
Rating
0
P
PrintablesSkovik

Nábytková úchytka (furniture handle)

==== CZ ==== Běžná nábytková úchytka na skříň nebo šuplík ve skříni. Rozteč děr: 96 mm, Rozměry: 104 x 26 x 11 mm Rozteč děr: 128 mm, Rozměry: 136 x 26 x 11 mm Rozteč děr: 160 mm, Rozměry: 168 x 26 x 11 mm Díra na vrut: průměr 3mm Tisk:…

Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
207
Likes
24
Rating
5

Gieskanne / Watering can

Prints without supports, watertight (printed mine with eight bottom layers, three walls plus fuzzy skin), holds a little over 1 litre water. Printed in “Extrudr BioFusion epic purple” with fuzzy skin, see m3f file.

Print approx. €9.63–€11.78 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
15
Rating
0
P
PrintablesOnKo

Spojka na kolejnice k IKEA železnici

Spojka pro kolejnice k vláčkům Tisk není nic složitého, PLA nebo PETG bez podpěr 0.2mm

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
18
Rating
5
P
Printablespebi

Verschlusskappe für Bierflaschen

Damit könnt ihr euer Bier oder andere Flaschen mit gleicher Form gegen Insekten im freien verschließen.

Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
13
Rating
5
P
Printableskjrps

wire soldering clamp jig / Löthilfe für Kabel löten

The characteristics of my model: fixable on the desk with a clamp or weight it lower and better accessible, better for me to work better wire alignment, because of two clamps the model is for diameter up to 1,8mm scale 170% (like in the…

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
13
Rating
5
P
Printablesmatej

upholstery clip 4mm / prichytka calouneni 4mm

prichytka calouneni dveri auta. ve sliceru je třeba nastavit “detekce tenkých stěn” aby se správně vytvořila první vrstva včetně křidýlek. Pokud potřebujete úchytku upravit, zde je zdroj https://www.tinkercad.com/things/ddFXnxxtSBB-autocudl

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
199
Likes
76
Rating
5
P
PrintablesBarBarBarbucha

Krytka plasového okna Plastic window cover

Zase jedna rychlovka s chybami, ale funkční.

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
191
Likes
20
Rating
4
P
PrintablesGigiGipo

Karate Bookends

Can be printed with 5% rectilinear infill ( 2% after 2mm). Material: PLA Nozzle: 0,4mm Layer: 0,2mm first 2mm, after 0.25 Print settings: 0.20mm SPEED helper disk used Thank you for downloading and like.

Print approx. €7.08–€8.66 excl. taxPreliminary estimate for one variant

Downloads
188
Likes
40
Rating
4
P
PrintablesCtihy

Karak - paper figure holder / držák postaviček

Držák papírových postaviček pro mé inserty do hry Karak. Určeno pro nové 20 mm stojánky postaviček (2. vydání a rozšíření hry už mají tyto stojánky):…

Print approx. €5.28–€6.46 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
9
Rating
5
P
PrintablesKingpinFelix

Skadis FunkoPop Remix

Remix of the Skadis Funkopop model by Jabbatheporg.

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
44
Rating
3.67
P
PrintablesRoman Rýdl

Krytka koule tažného zařízení

Krytka koule tažného zařízení z PLA

Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
11
Rating
0
P
PrintablesMrRogers

Soldering Tools Holder for IKEA SKADIS Pegboard

Intro Designed for the common set of six soldering tools, since they are double sided didn't want to just throw them into a cup. Having them all on display makes it easier to find the specific one I need. Would also work with certain…

Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
175
Likes
43
Rating
5
P
PrintablesPeter Farell

Fukurokuju with Karako

Netsuke, Fukurokuju with Karako. A Japanese ivory button used to hang objects from the sash of a kimono.

Print approx. €4.08–€4.99 excl. taxPreliminary estimate for one variant

Downloads
172
Likes
36
Rating
0
P
Printablesplachytomas.cz

Fastener for racing track Ites / Faro / česká autodráha (sponka na autodráhu)

Main aim Cheap and simple replacement of the original fastener. That is buyable on https://www.ites.cz/eshop/dily-drahy/spony-autodrahy-24-ks.html Print settings PLA OR PET-G 100% infill 0.15 layer Notes Prepared 3mf file for Prusa Mini…

Print approx. €4.04–€4.93 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
10
Rating
5
P
PrintablesVictor

Držák řetízku žaluzie+krytka

Tisknout na detail 0,1mm pro přesnější detail,pokud možno PETG,je pěvnější a hned se neotřepe

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
164
Likes
24
Rating
5
P
PrintablesBasti09

Covercap round , Abdeckkappe rund

Cover Cap Round i created this cap to cover an open pipe on a truck.

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
164
Likes
11
Rating
5
P
PrintablesPavlíček

Zimní ucpávka trysky bazénu Azuro (G1 1/2-11)

Použijte O-kroužek 2mm x46mm či podobný, nebo můžete vytisknout přiložený kroužek, třeba z TPU.

Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
18
Rating
5
P
PrintablesLogan

Benzin Diesel Clips für 20l Kanister

Die Clips habe ich für Standard Benzinkanister 20l aus Kunststoff gezeichnet mit einem Griffdurchmesser von 30mm Es gibt 1/25 1/30 1/50 Benzin Diesel Den Filamentwechsel habe ich bei 1mm gemacht Für die kleinen 5l Kanister einfach auf 83%…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
26
Rating
5
P
PrintablesCtihy

Karak - držák kostek a životů / life and dice holder

Držák kostek a životů (včetně Deluxe setu) pro mé inserty do hry Karak. Tisknul jsem na MK3S+, 0.20 Quality, výplň 15%, PLA silver. ____________________________________________________________________________________ Life and dice…

Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant

Downloads
145
Likes
9
Rating
4.67
P
PrintablesPeter Farell

Jibanyan : Yo-Kai Watch

Jibanyan from Yo-kai Watch.

Print approx. €16.04–€19.60 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
22
Rating
5
P
PrintablesPeter Farell

Armenian Khachkar Stone

Armenian Khachkar Stone The Enduring Legacy of Armenian Khachkars: A History Carved in Stone The Armenian Khachkar, or cross-stone, stands as a unique and enduring symbol of Armenia's rich cultural and religious heritage. These…

Print approx. €14.97–€18.30 excl. taxPreliminary estimate for one variant

Downloads
137
Likes
26
Rating
5
P
PrintablesThomas Hoeser

Steckschlüssel für Einhandmischer Kartusche im Wohnmobil

Wenn man die Kartusche im Einhebelmischer austauschen möchte, ist ein normaler Steckschlüssel leider nicht zu gebrauchen. Das Werkzeug aus dem 3D-Druck reicht, um die die Mutter mit der Hand zu lösen und wieder anzuziehen.

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
137
Likes
14
Rating
0
P
PrintablesBobes

Citroen Towbar cover, hook cap, krytka tažného zařízení

Krytka tažného zařízení. Towing device cover

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant

Downloads
134
Likes
9
Rating
5
P
Printablesmaciek18339

Desk Stranding - IKEA Skadis mount

Hello everyone! Project is created for mounting this awesome lamp to IKEA skadis pegboard. It has a few shortcomings (mostly cuz I didn't want to go after the required parts) but It just works. As I wanted to minimize the number of…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
133
Likes
60
Rating
4.33
P
PrintablesBasti09

Covercap square, Abdeckkappe viereckig

This cap is to cover the end of a square pipe

Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
10
Rating
0
P
PrintablesJan Hubík

Window blinds cover / Krytka žaluzie

The cover was modelled to be identical to the original. The original covers become fragile with age and crumble. Printed in Prusament PETG, no supports, 0.15 mm layer height (to make the fillets nice), 0.4 mm nozzle. Left and right models…

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
129
Likes
16
Rating
0
P
PrintablesJan Šanda

krytka matky

krytka matek pro přední a zadní kolo kukirin G3 pro

Print approx. €1.13–€1.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
13
Rating
0
P
PrintablesQuido Wagner

Kabelová příchytka

Příchytka k uchycení kabelu na zeď.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
17
Rating
5
P
PrintablesJérémy Reeder

Sheikah Bookmark

Designed by Michael Dansie. This bookmark is meant to be printed as a single two-color piece, on a single-extruder printer, with a lot of ironing.

Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
21
Rating
5
P
PrintablesMP

Lenkradkappe IHC 453

Dies ist eine Kappe, zum Abdecken der Lenkradverschraubung eines IHC 453. Meinem Mann gefällt es. Einzelteile ausdrucken, zusammenfügen fertig.

Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
113
Likes
2
Rating
0
P
PrintablesNozzle

Phonestand credit card size Handyhalter im Scheckkarten Format Quick Print

Printed on Prusa MK3S+ with default 0.2 Prusament PETG settings.

Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
113
Likes
7
Rating
5