1,318 models
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Soaker hose spike to keep my soaker hoses in place. Designed a barb at the bottom to help keep in place. Printed using draft mode for .3mm layers(thicker layers are more durable), three perimeters, high end of PETG range for strength.
Print approx. €6.42–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
Keep your inhaler from accidentally going off. Save money and waste less with these guards. Cutouts allow you to depress canister without removing the cap. Bonus points, it keeps your inhaler clean.
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Designed this floss keeper for my crafty friends and family. They required a holder to suit cross stitch projects. After printing I would recommend giving a light sand with fine grit (800 - 1600) sandpaper on both sides in order to get…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Note added Jan. 6, 2022 : Since I made this, I created another version for flexible filament: https://www.prusaprinters.org/prints/114467-cord-clip-plug-keeper-flex-version-two-sizes These simple clips are designed for standard power…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
The straps are approximately 38mm high. The keepers are designed to be slid on without having to remove the buckles, just fold the straps a bit and push them in through the slot with the slot pointing inwards. I used PETG for flexibility…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Fun puny gift for fathers day.
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
A handy size case to carry your medicine and vitamins. Slips into pocket or ladies purse. The lid screws on to keep everything secure. No spilling into pockets, etc. It easily scaled to your individual size. There is even a model with two…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Bottle Opener - keeps bottle cap flat History of this bottle opener: About 40 years ago my dad created and afaik invented the in the pictures shown bottle opener made out of wood. He made really many of them manually on his lathe - afaik…
Print approx. €8.19–€10.01 excl. taxPreliminary estimate for one variant
I really appreciate you if you can consider a coffee for me if you like the design! ------- Lid snaps perfectly with Bar Keepers Friend. The lid has the inner depth to hold the seal to avoid powder comes out from the top when the can…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
This is a thin lip to go on the edge of a shelf to keep small items from falling off. It has a 1 or 2 layer 20mm wide flat part that I affix to the shelf with double sided tape. The lip is 5 or so mm tall. The lip is 5 mm on the inside,…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I lost the keeper part of the cross bolt and keeper from my Sig Romeo 5 optic. Sig only charges 6.99 on their website for the replacement, but wants 15 bucks just to ship it. Since I am using it on a low recoil device I opted to model it…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
225 mm wide sign "Keep off the Dirigible Plums" for placement in landscaping or garden.
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
Translation in 3d print of this project in shaperhub.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Rather than making a little mess every time I use the spatula while cooking, I put it on the holder, away from the counter top and mess-free. Making the unit all in one print would require support, so I made three pieces. The supports…
Print approx. €4.78–€5.85 excl. taxPreliminary estimate for one variant
Intro Enjoy your favorite drink outdoors without worrying about unwanted visitors. The Anti Wasp Cap is a simple and practical bottle cap designed to help prevent wasps and other insects from entering your bottle while you're not…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Given the cost of grass seed these days and the amount of effort one must invest to seed their yard, I certainly want to maximize my germination rate. Main goal of this sign is to prevent the neighborhood dogs from using the bathroom on…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for one variant
My wife asked for a lifter to pull up only a few crackers (like Ritz) from this legacy container (RPI Cookie Cracker Keeper, not available anywhere anymore). I designed it quickly in Fusion 360. I made no effort to make it parametric, so…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
For my IKEA STUVA/PLATSA Enclosure i wanted to have a spot for my tools that was nice and handy. So made this little pegboard so i could attach anything i wanted to it. The board have holes for 2 little screws. And the attachments are…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
My wife asked for a lifter to pull up only a few crackers (like Saltines) from this legacy container (RPI Stay Fresh, not available anywhere anymore). I designed it quickly in Fusion 360. I made no effort to make it parametric, so modify…
Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant
Strong wind can easily move BBQs and outdoor furniture, even when caster wheel brakes are applied. This Wind-Proof Caster Wheel Stopper is a simple, reliable solution to keep everything safely in place. Designed to work with standard…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Have you ever been in a situation where you thought "oh i wish i had a card, that i would just pull out". That is now possible! !Print instructions!: keep the orientation In the model are included two squares. Do NOT remove those, if you…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
Cup that keeps your toothbrush dry - Rounded edition Cup that let the water fall and keeps your toothbrushes dry, designed in rounded shape. Cup for toothbrushes, that you can attach to the wall just by hooking handle on screws, by…
Print approx. €6.25–€7.64 excl. taxPreliminary estimate for PETGSource material: PET
Cup that keeps your toothbrush dry - Hexagonal edition Cup that let the water fall and keeps your toothbrushes dry, designed in hexagonal shape. Cup for toothbrushes, that you can attach to the wall just by hooking handle on screws, by…
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for PETGSource material: PET
A simple, sturdy desk stand for using the Steam Deck docked to a monitor with a single USB-C cable. The cradle is modelled directly on Valve's official Steam Deck CAD files, so it follows the actual shape of the Deck instead of guessing.…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
Keep your loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no need for bridging. Other Sizes: Cable Keeper Medium:…
You like your filament dry ☂. And yes, there are some silica gel boxes out there already. But most of them are a bit too generic are lacking features like a hollow core … … or a bearing mount option to work as a filament roller. 😍 And…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
This is a storage solution for sanding discs in 125 or 150 mm diameter. They can be stacked with an integrated connection system and they keep together also without screwing them to a wall or wood. Anyhow for more than 5 pieces it's…
Introducing the ultimate indoor summertime activity - the Retro Turtle Sandbox! Inspired by the iconic Little Tikes sandbox from our childhood, this sandbox is perfect for hours of endless fun sculpting with kinetic sand . To give you an…
AirTags are a great way to keep track of your valuables, especially while traveling. An AirTag thrown in your suitcase, or hanging from the handle of your bag will provide some peace of mind, and make it easy to recover misplaced luggage,…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
SNAPTOR, durable strength! Printed in one piece and activated with a single snap, the SNAPTOR is a compact clamp that’s always ready to bite. Its integrated preloaded spring mechanism is activated after printing. No screws, no assembly,…
Update 2/19/2023: Added no-water-drops design for Top and the Default Jar Size per user comment/request (top/bottom text remains). Update 2/7/2023: Added a 12 mm-shorter version per user request. This model is designed to make storing and…
The Timekeeper is the well-mannered and disturbingly calm tyrant who rules over the prison planet of Kairos. Obsessed with order, he uses cybernetic implants to watch over and control his citizens. AVAILABLE NOW! Get your copy of…
A two-piece corner clamp designed to help keep your fitted sheet from slipping off the mattress. The base sits against the mattress corner, underneath the fitted sheet. Pull the sheet over the base, then fit the outer clip to hold the…
Inspired by Game of Thrones / A Song of Ice and Fire, and House of the Dragon , here's our rendition of the Red Keep in King's Landing ! The Red Keep is the main castle and residence of the King and court in the city of King's Landing,…
If you are lactose intolerant or know someone who is, you are probably aware of this problem: You're not at home and would like to have a nice cappuccino or any other beverage containing milk. Unfortunately you left your lactase pills are…
Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…
This is a remix of the original card keeper model. I increased the size and added a side support post. Its not perfect - but usable for sure. Edited in Tinkercad. Added tab to label the deck. Printed in PLA with 20% infill and 3 walls @…
I designed and 3D printed this minimalist soap dish to solve a common problem — soggy soap! It features a built-in drain channel that allows water to run off easily, keeping your soap dry and lasting longer. The open design promotes…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint This one will only need some support for the upper lip but the rest will have no problem.
The original Cable Keeper, but TWICE THE SIZE! Keep your extra long loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short a distance as possible. Orient the cable wrap part so there is no…
Just a simple keeper for a fishing hook or lure. It hooks to the reel, and the hook goes into the eye.
A lid to keep your bar keepers friend in its container. Print it top side down, no supports. It's not quite a press fit because popping it off with force gets the stuff in the air and you probably wouldn't enjoy inhaling it. Knurls to be…
Printing Note Custom sizing: In the slicer, cut the model to extend/shrink in any dimension; alternatively scale the model (make sure the overhang is not too shallow). Keepers can clip onto each other. How well they clip together will…
The original Cable Keeper, but 1.5x larger! Keep your longer loose cables tidy. Slicing Tips: Try to orient the main part so the first layer of bridging is as short as possible. Orient the cable wrap part so there is no need for bridging.…
Only .08gram of Supports needed(For teeth)! I've been eyeing this model for a while. I really wanted to have a dice tower with a dragon on it but the original model was slam full of supports as every spine on the dragon was pointed down…
Fishing Rod Hook Keeper – Secure Your Hook with Ease! Easily attach this compact hook keeper to your rod using zip ties or an elastic O-ring. It keeps your hook secure when not in use, preventing tangles and damage. A simple and reliable…
Compact idol shaped like a hooded crypt keeper holding a lantern, all details fused tightly. Thick proportions, one-piece printable statue. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Disappointed in the Horror Fright metal socket rails, I designed my own. Set 1: 1/2 inch. Large rail holds 6 sockets ranging from 1" up. Small rail holds 7 sockets ranging from 15/16" down. Set 2: 3/8 inch rail that holds 10 sockets Set…
Description: Add some spooky charm to your Halloween setup with the Pumpkin Treat Keeper – Halloween Candy Bowl 3D Print Model ! This detailed pumpkin-shaped candy holder features an open mouth design filled with Halloween spirit —…
If you have an aquarium then you understand the struggle to manage and bend cords. This print safely routes wires over the top of the tank with a visually pleasing, smooth bend. Revision 2 Revision 2 adds cord keepers with different…
I printed with layer height of 0.2, no supports needed.
A simple latching lid for barkeepers friend. The lid will snap over the container and the latch will catch on the lower lip. Printed in PLA with a .2mm layer height and 100% infill (the only space for infill is in the sidewall so it…
Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…
Keeps your toilet roll clean for when you need it. Whether hiking, camping or just to keep in a bag in emergencies, always have your favourite paper ready to go! Just feed in your choice of paper (up to 10cm wide) and then twist top to…
An easy and fashionable way to keep your rings when you have to work, cook etc. Just slide the ring over the ring keeper (see the video). No need to open the necklace! It also doubles as a pretty necklace wihtout rings. Multicolor…
Here are the files for my Keepsake Heart its a snap fit box with a hanger loop, which would be perfect for giving small tokens to your Valentines. then the Keepsake can be kept as a hanging trinket box All 3 parts can be printed at once…
I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too! Here’s what it does:…
Easy to Install with rubber bands or O-Ring. Fits any rod. Accepts multiple hook sizes.
The towering structure is heavily based on the wonderful "White Tower" drawing by SnowSkadi . The base is my original idea. This print comes in 3 pieces, no supports required.
This model has tabs on the top and notches on the bottom to all you to stack multiple card games on top of eachother. I recommend printing with supports, at the very least on the bottom tabs. Added a version to hold Uno: No Mercy. This…
This module is specifically designed for the QIDI BOX , the multi-filament system for QIDI printers. Its purpose is to keep your filament in top condition by preventing moisture from compromising print quality. The design features vented…
I liked the model by Chris, but I wanted it parametric so I could make one for some huge Go Fish cards my kids have. Getting from the STEP file provided by Chris (which is much better than STL, thanks Chris!) to a parametric model was not…
This is not a weapon, nor a functional part for any weapon. I designed this to aid in storage of my extra uppers by functioning as both a dust cover and a solid block to keep the bolt carrier group from falling out. I've seen commercial…
Since I had some trouble with my original Apple cables being incredibly fragile when bent too much, I decided to remix this. I rounded the corners to hopefully limit the stress that's put on the cables. Prints without supports. The…
This doorstopper contest came at a perfect time as I was just thinking about making this wee doorstopper to keep my garden door slightly open for ventilation. I have plants on the window that would freeze if I forgot to close it and I…
A horror-inspired dual-mode 3D bust that can be used as both a headphone stand and a desktop display figure with a hat. Perfect for collectors and spooky setups — this model brings a chilling atmosphere to any desk or shelf. Designed with…
The Grovekeeper's Scroll Case is a dice storing case made to fit a full dice set (and maybe one or two more dice) using the Mythic Potions lid system. All the lids from the Mythic Potions are interchangeable so you can mix and match each…
This is a remix of https://www.thingiverse.com/thing:4159549 by Thomaswt However, I have combined the score and main tile sections into a single piece, and have shaved off the edges so it can be printed on a single 220mmx220mm bed (unlike…
I often leave my phone in my workshop or office and forget where it is, and have to search around. I explored various wall-mounts but nothing really spoke to me. A particular issue is that I keep my smartphone in a leather-ish case, so…
The Pokedex box is a small storage display for all sorts of things like keepsakes, jewellery, makeup, cards or whatever you can fit in there Prints in pieces and assembles easily with some super glue. for the small red, yellow and green…
MacBook Pro Cable Organizer: Keep Your Charger Neat and Tangle-Free September 29, 2024 Update: Added Cable Organizer compatible with thicker 4,5mm diameter braided cable. Product Description: The MacBook Pro cable organizer clip is a…
EDIT: I was notified that the original insert was removed or the link is at the very least broken. I have now included the Original insert and all the pieces, so you can even use it if you don't have the expansions! I really loved the…
Orientate the parts in the best direction for you to minimize support material. every part has been cut to have a fairly large surface to get a nice first layer with. its been sliced to fit most print build volumes. all of the parts were…
Charming little poodle figurine with puzzle love heart - a unique and timeless keepsake for pet lovers. Height: 95 mm Layer High: 0,2 mm Supports: No Scalable: Yes Filament: PLA or PETG
(Original model I designed) Crypt Keeper Bring horror legends to life with this haunting Crypt Keeper 3D statue. Detailed with bony fingers, wrinkled skin, hollow eyes, and his signature eerie grin, the Keeper sits hunched over an ancient…
This model is an adjustable door holder. It should permit enough clearance for a cat to enter a room, while keeping out a dog. It requires one screw, although it should be pretty easy to print a little nub to fit into the door latch. It's…
Pocket case for 3x5index cards with Task list stencil and stencil for lined and/or (.25")Grid paper. As shown both stencils are stored in the case with room for ~20cards. I carry cards in my pockets for quick note taking and needed a…
Minimalistic angel figurine holding a heart ❤ Great as christmas decoration, as gift or as a keepsake for a loved one. Height: ca. 188 mm Layer High: 0,2 mm Supports: Yes Filament: PLA or PETG Scalable: Yes
function open by pulling the middle out, and holding it right or left to open the opposing slot (one hand operation possible) catch the cables for that slot and move the middle to the other side for the other slot. press the middle down…
A simple replacement free loop for the Garmin Forerunner 935 or any other Garmin with a 22mm band. Made in Fusion360, it is intended to be as true to the original as possible. Printing Instructions Print on its side for best results.…
Clip for securing servo connectors. Handy for making sure servo extension wires don't come apart or for keeping receiver batteries connected to switches. Print Settings Rafts: No Supports: No Infill: 100% Notes: I printed at 0.06mm to…
This is an insert for the Boardgame Keep The Heroes Out! with the Expansions Guild Masters Revenge, Boss Battles, The Great Dreamer, Sparkling Guardian and Cozy Dungeon. It fits all into the main box (small lid lift of 1-2mm) with a…
Desk cord keeper to keep cords on top of desk and organized when not in use. 4 cord and 6 cord versions both available.
This model is a remix of the card game keeper by Chris. I have adjusted the height of the model to fit a standard size game of cards. The fit and tolerances is the same as the original.
Here is a simple strap keeper that can be used as a replacement part for securing the hip belt on backpacks. It ensures that loose, excess strap ends are neatly held in place. I've designed various models for straps ranging from 20 mm to…
"In a world ravaged by polution, disease and disparity, these oathkeepers wander the land seeking out and slaying any techno peasants who do not submit to the authority of their ultra wealthy lords." This is a sample from dorkfactory's…
Feeder for ants in 18mm. test tube. Because each test tube is vary in mouth's thickness, some tube might not fit. If it can't slide in your tube with ease, don't force it. I've upload 2 size of model OD18 for tube that has ID 15.5mm.(most…
Remixed Magic Band 2 Strap Keeper by DuaneL and increased the inner width by 0.5mm and inner length by 1.0mm. The special edition MagicBand+ bands I have are slightly thicker than my older MagicBand2 straps. The increased sizes also…
The model from PinkOrange09 is good, but I don't like how the filament could roll out. I added a small lip, and then resized it to optimally store a 1kg roll. Print without supports in the orientation you would use it. The snap fitting…
This is always a necessary and useful thing in the house — a wall-mounted key hanger. It constantly hangs in the hallway and prevents you from forgetting or losing your house keys. And if she's also beautiful, that's doubly nice! I named…
I like the idea of hedgehog pencil holders I found online , but was unhappy with how they were designed. Specifically, I really didn't love that you couldn't put a pencil pointy-tip-down and keep it from resting on the tip. So I designed…
A hook holder based on the Fuji hook holder. Overall printed size is 20mm high, 22mm long and 20mm wide. Print Settings Printer Brand: Up Printer: Up Plus2 Rafts: Yes Supports: Yes Resolution: 0.1 Infill: 65% Category: Sport & Outdoors
A Festive Fireplace to charge your phone and keep you toasty. Should work with a lot of phones up to 20mm thick. I designed it around my iPhone 13 pro. The back piece slides forward and backwards to hold the phone in place. You can add a…
A unique and timeless keepsake for dog lovers. Low poly. Height: 150 mm Layer High: 0,2 mm Supports: Yes Filament: PLA or PETG
