Search results: kerb

Sort order

455 models

P
PrintablesGamerMechanic81

4-Player Chess or Checkerboard (warped squares)

This should print just fine on a prusa mini or larger. Print 4 of these boards and lay them oiut to make an octogon. Chess starting positions are on the split sides. of the octogon. Print cehss or checkers pieces at .5" in diameter at…

Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant

Downloads
70
Likes
10
Rating
0
P
PrintablesBigH

TexRC KerbTex Medium Radius (300mm) 90deg Corner

Overview TexRC KerbTex Medium Radius (300mm) 45deg Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 45 degree corners and hairpins.…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
59
Likes
7
Rating
0
P
Printablesbowtie6

Prusa GPIO Hackerboard cover without logos

Simple remix of the V2 version of the hackerboard cover @StevePaterson made. I also printed my version on a textured sheet, to give it a consistent look. Printed in black PETG.

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
6
Rating
5
P
Printablesdav88

Tinkerbell

a Tinkerbell sculpt. print no less than original (which is in inches) or will lose fingers. fingers are very fragile. take great care. can be printed smaller if using a resin printer. use supports. Category: Sculptures

Downloads
2,697
Likes
292
Rating
4.14
P
PrintablesWaRi

Jebediah Kerman (Kerbal Space Program) (IVA suit)

Jebediah Kerman from the game Kerbal Space Program in his IVA suit. the suit is a mix from the different suits that the game had along the different versions, cinematics and the ACES suit. I printed it at 250%, .08 layer height on my…

Downloads
2,367
Likes
666
Rating
4.91
P
PrintablesGabriel

(Makerbot) T-Rex Prusa Mini+ (PETG) Gcode

This design is not mine. This is the Mini+ Gcode that I made for (Makerbot T-rex) stl and design originally found at this link: https://www.thingiverse.com/thing:275091 This for those that don't want to slice the stl themselves and…

Downloads
1,137
Likes
119
Rating
5
P
PrintablesSteve

Prusa GPIO "Hackerboard" Cover

Printed cover to mount the Prusa GPIO “Hackerboard” to the frame. 4x M3x6 BHCS or SHCS to mount the board to the cover 2x M3x10 SHCS to mount the cover to the frame Wires route through the MMU pathway into the electronics enclosure.…

Downloads
1,088
Likes
275
Rating
4.98
P
PrintablesAnHe

Case for Makerbase MKS TS35 V2.0 touchscreen

I could not find a ready made case, so I decided to design something by myself the case is for the Makerbase MKS TS35 V2.0 touchscreen (shipped with MKS robin nano V3) it is the one with a control button but no reset switch maybe someone…

Downloads
984
Likes
41
Rating
5
P
PrintablesRobert Samples

Voron V0 No-Drop Nuts for Makerbeam XL extrusions

Zruncho's No-Drop Nut mod is very popular but only works for conventional 1515 extrusions, these have been redesigned for makerbeam XL extrusions. There are 12 and 15 mm (15 mm is best for most uses) single nut versions as well as a…

Downloads
723
Likes
78
Rating
4.78
P
PrintablesDr Operator

MINI 13: Tinkerbell

I have lots more remixes on the way, but for now, here's Tinkerbell. This model replaces most of the Mini 13 armor, you will still need to download mini13-armor-head.stl as well as the MINI 13 frame parts. The wings are super easy to…

Downloads
697
Likes
227
Rating
5
P
PrintablesPvtPrivate

Printed MakerBeamXL 1515 Extrusions for Voron 0.2 Tophat

Printed MakerBeamXL 1515 extrusion and Clips to join them together. "Why not use TinnT's or ryandam's solutions? They seem much sturdier and easier to print than this" Because I plan to use future 0.2 tophat mods, such as chirpy's Tophat…

Downloads
588
Likes
112
Rating
5
P
PrintablesDavid

Tinkerbell

This is Tinker Bell figurine. I made this originally in PC (polycarbonate). Fingers are fragile and are missing great resolution.

Downloads
506
Likes
57
Rating
4.5
P
PrintablesMarianne657

Checkerboard - XL texture roller

Imprints clay with a geometrical checkerboard texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to…

Downloads
474
Likes
119
Rating
5
P
PrintablesBrewzr 3D

TinkerBell Croc Charm

Remix of the two files below https://www.thingiverse.com/thing:4834785 https://www.thingiverse.com/thing:4538885

Downloads
470
Likes
72
Rating
0
P
PrintablesBobbyD

Makerbot Gnome Unbadged

I updated this to remove the badging so there would be better bed adhesion. I don't have the bed adhesion issue after upgrading to the PEI Flex plate but still wanted to share. Wish there were more Gnomes available like this one.

Downloads
469
Likes
81
Rating
5
P
PrintablesPistonPin

Display cover for Makerbase MKS Mini 12864 v3

A display cover for the MKS Mini 12864 v3 to be mounted to 20xx aluminium extrusion profiles. Requires 2x M5x10 bolts + nuts and 4x M3x6 screws. Edit 12.01.2022: I've accidentally uploaded an older version of the STL file, where the hole…

Downloads
468
Likes
26
Rating
4.75
P
PrintablesC&C 3D Factory

Makerbot gear fidgets

Makerbot gear fidgets

Downloads
465
Likes
43
Rating
5
P
PrintablesGuido

Door and Window for doll, dwarf, hobbit, tinkerbell or mouse houses. No support printable.

Easy to print. No supports needed, 3 parts. Click door into frame. Can be opened. Can be placed against skirting board, on tree or in dollhouse. Think of other applications yourself.

Downloads
413
Likes
87
Rating
5
P
PrintablesThe Osprey

Multicolor Kerbal from Kerbal Space Program for Bambu lab AMS

I wanted a multicolor Kerbal so here it is! Please post your makes I would love to see them! P.S. Make sure you put the helmet on first or you won't be able to glue and assemble it!

Downloads
392
Likes
66
Rating
4.75
P
PrintablesYexo

Dog House for Makerbot Test Dog

Just made it because why not

Downloads
374
Likes
40
Rating
5
P
PrintablesLittleNeutrino

Makerbot Gear Fidget Remix

I printed the Makerbot gear fidget a few times and wanted it to have two sides so i remixed it. Print instructions Layer Height: 0.15mm Infill: 15% Supports: No

Downloads
365
Likes
19
Rating
4.67

makerbot empty spool organizer

after 7 years working with 3d printers this is my first file on thingiverse. I decided to give the empty spools a second life. This file is only compatible with makerbot 5th generation PLA spools Print Settings Printer Brand: MakerBot…

Downloads
330
Likes
196
Rating
0
P
PrintablesMaker Mike

M2 T-Nuts for Voron 0.1 Makerbeam XL 1515 Extrusion

M2 T-Nuts are great for attaching components to Voron 0 3D printers, to 1515 aluminium extrusion or even attach the Voron 0 case using the T-Nuts. You can use these 'post build' when you can't slide any M3 nuts into the extrusion slots…

Downloads
322
Likes
61
Rating
5

Makerbot Headphone Stand Remix

Version 003: Now with an option to make it really heavy I have been using this stand for a while now, and two things have bothered me: I wanted points as feet so it would always stand well even on not-so-flat surfaces I wanted it to be a…

Downloads
307
Likes
21
Rating
5
P
Printablesprintornaut

The Kraken - A Kerbal nemesis

Kraken - A Kerbal Nemesis Developed to submit to #e3dflexibles2021 design contest. Thanks for the contest E3d! What the heck is this? A flexible KSP Kraken based on inspiration from the KSP deltaV subway map (found here:…

Downloads
298
Likes
49
Rating
5
P
PrintablesCrazy3D

Boundary wire groove tool mower robot - Kerb-Werkzeug für Begrenzungsdraht Mähroboter

Boundary wire groove tool mower robot - Kerb-Werkzeug für Begrenzungsdraht Mähroboter If you like it --> press like it :-) Tool to make the groove for the boundary wire of your lawnmower. It worked at my lawn at wet condition, one day…

Downloads
297
Likes
75
Rating
5
P
Printablesschellek

Makerbase MKS Mini 12864 v3 Voron case

Voron case for the Makerbase MKS Mini 12864 v3

Downloads
285
Likes
18
Rating
5
P
PrintablesNeolker

Prusa GPIO Hackerboard case

UPDATE 2025-03-03: Uploaded STEP files for easier editing and ready to print .bgcodes for Prusa Core One and Prusa MK4S. The hexagonal case for GPIO Hackerboard You only need 4 pcs standard M3x10 screws from the spare bag:

Downloads
280
Likes
46
Rating
5

Makerbase mks robin nano v1.2 firmware for anet a8 plus

Links to the Required hardware: Mks nano v1.2 Board + tft 35: https://a.aliexpress.com/_EQSJ0yN A4988 drivers: https://a.aliexpress.com/_EwGs2gV Z axis splitter: https://a.aliexpress.com/_EvYdWGd

Downloads
270
Likes
3
Rating
0
P
PrintablesMichal

SockerBall - Tallow ball holder / Fotbalový míč - Držák lojové koule

Výsledek tištěn s podporami, tisk cca 4,5 hodiny.

Downloads
257
Likes
31
Rating
5
P
Printables3D-DRUCKWELT

Tinkerbell Lampe

Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or legal reseller.…

Downloads
241
Likes
60
Rating
0
P
PrintablesSpamBouncer

Makerbot End / Limit-Switch Holder 4 Anycubic I3 MEGA

After half a year of use in manufacturing, the limit switches on my AnyCubic I3 MEGA are due for replacement. Unfortunately, it is quite difficult to get matching limit switches. Luckily, there are good alternatives that work with minor…

Downloads
237
Likes
16
Rating
0
P
PrintablesOleynick

Snap in M3 nuts for Makerbeam XL 1515

Print it flat, don't rotate model, othervise it will crack when screw is inserted. No supports needed. It might be prone to sliding, but its not comming out. I used mine to secure Nevermore filter in place in my Voron 0.2. Works like…

Downloads
226
Likes
72
Rating
5
P
PrintablesMac Pierce

MakerBeam - 10mm x 10mm (1010) Flat Plates Full Set

I couldn't find any 3D files for plates fitting the 10mm extrusion MakerBeam brands as their 'Regular' series, so I modeled them up. All plates are 1.5mm thick and the through holes are 3mm ID per the spec. Included is the flat plate, the…

Downloads
220
Likes
20
Rating
0
P
PrintablesInspector5

MakerBot Keyring Fidget Gear

Remixed MakerBot's fidget gears to add an integrated keyring. Maybe my son won't lose them now! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50 Category: Keychains

Downloads
219
Likes
15
Rating
5
P
PrintablesMVTTO

F1 Track kerb stand for Bburago 1/43 cars

You need 1x Asphalt stand - black one, 7x red square and 1x white kerb If you want, you can make the height from 1.5mm to 2.5mm in the slicer (if you want the car to be slightly tilted, as if it was riding the kerb with one wheel).

Downloads
212
Likes
51
Rating
5

Makerbeam XL Corner Cube (1515 extrusion)

Makerbeam XL Corner Cubes (1515 extrusion) I designed for a project I'm working on. I figured somebody else may find these useful.

Downloads
209
Likes
27
Rating
5

MAKERBASE MKS DLC32 TS35-R V2.0

PET-G Prusa Orange Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Notes: PET-G Prusa Orange Layer 0,2mm 3x perimetr Category: Electronics

Downloads
204
Likes
15
Rating
0

MAKERBASE MKS DLC32 v2.x

PET-G Prusa Black Layer 0,2mm 3x perimetr Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Category: Other

Downloads
201
Likes
11
Rating
0
P
PrintablesThe Osprey

Water Tight Fully 3D Printed Bottle - The MakerBottle - (Vase Mode)

IMPORTANT: You must use these settings in order to make this bottle work properly and be completely watertight. You must print the ‘MAKERBOTTLE’ file in PETG filament Nozzle Temp:~240C Bed Temp:~80C Line Width:0.8mm Layer Hight:0.2…

Downloads
200
Likes
19
Rating
0
P
PrintablesSquidMan

MakerBeamXL 1515 extrusion cable clip

Little cable clip to route wires along the makerbeamXL extrusions on printers such as the voron v0. Works as supplied even if it may seem that it's a bit small, just be a bit more confident forcing it into the extrusion. STEP included in…

Downloads
195
Likes
28
Rating
5

FlexiDinos Tinkerbell the flexi Z-Rex Mutant Zombie print in place articulated dinosaur T-Rex Halloween Special

Klaatu Barada N… Necktie… Nectar… Nickel… Noodle It's an "N" word; it's definitely an "N" word! That's what happens when you don't listen to the druid. You get a mutant zombie apocalypse. You're welcome, happy Halloween, everyone.…

Downloads
193
Likes
75
Rating
4.78
P
PrintablesBen

Makerbeam, Makerbeam XL Extrusions

Made in Inventor. Based off online dimensions.

Downloads
186
Likes
14
Rating
3.5
P
PrintablesMike Car

Checkerboard Power T

Designed for multi-color print with two color changes. Enjoy and Go Vols!

Downloads
174
Likes
13
Rating
5
P
PrintablesVoxel3D_NL

MKS / makerbase Mini12864 V3 LCD screen case + mount

I loved the design of the case made by "derebbe" but it did not fit my Mks LCD12864 version 3 screen.. Also, I wanted to mount onto a flat plastic panel on the dreammaker overlord I am trying to rebuild, and I did not like the fact that…

Downloads
167
Likes
11
Rating
5
P
PrintablesPetr Nemec

Hádes - Hades with Kerberos

Greek God Hades with Kerberos. Just finished by AI

Downloads
162
Likes
17
Rating
0
P
PrintablesAustin Triggs

MakerBot Replicator 5th Gen & Replicator+ Spool Holder / Adapter

I made the lip taller to hold the spool better. Everything else is the same. Printed on a MakerBot Replicator (5th Generation) with a raft, no supports, a 0.2mm layer height, and 25% infill. Printed with Inland purple PLA. This is a remix…

Downloads
162
Likes
10
Rating
0
P
PrintablesPoisson

1515 Makerbeam extrusion cable cover / cable clip

This was created by jakoob of the Voron discord and uploaded with permission.

Downloads
159
Likes
23
Rating
0
P
PrintablesMrFlippant

Scalextric Flat Kerb Inserts V2

Thanks to Terry for pointing out my measurements were inaccurate. The original kerbs were one of my earliest projects and the CAD was absolutely terrible. I ended up completely redrawing pretty much all of the kerbs, using things I've…

Downloads
155
Likes
23
Rating
0
P
PrintablesJérémy Reeder

Woodgrain Checkerboard/Chessboard Box

This stylish board for chess or checkers folds in half and provides storage for playing pieces.* Each square of the board measures 45 mm (~1¾", or "executive size") on each side. In order to fit within a 250x210-mm print bed, each…

Downloads
152
Likes
28
Rating
0
P
PrintablesRoman

Tinkerbell - night light - figurine

Tinkerbell on a flower as a figurine and night light . The model is around 8cm high. I created it as a small present/give away for a children's birthday party. The pedestal has a cylindric opening: 24mm in diameter, 17mm deep. So that a…

Downloads
150
Likes
26
Rating
5
P
PrintablesJarfil

Plates for 1010 (10mm) MakerBeam®

I missed some more types of brackets in my Makerbeam® set, so decided to make some more. These are the flat (plates), to keep them separate from the actual 3D brackets . Included is a FreeCAD file with customizable beam size, hole size,…

Downloads
145
Likes
25
Rating
0
P
PrintablesJelle

Connected checkerboard bed calibration test pattern

Scale as needed to make it take up most of your print surface. One corner cut to identify the front-right corner, to more easily find high spots and low spots after removing the print. You can get by printing one layer, but it can be…

Downloads
143
Likes
4
Rating
5
P
PrintablesPrusa Research

Prusa GPIO Hackerboard

A detailed model of the Prusa GPIO Hackerboard . Created from the original PCB manufacturing data, but vastly improved by user PATROSS (thank you!) with nice labels and graphics for the various IO pins for the Prusa Chain Production PCB,…

Downloads
139
Likes
47
Rating
0
P
PrintablesTeppetuary

Loose Filament Spool for Makerbox

I loved The Goofy's loose filament spool, but it was too big for my MakerBox samples. I remixed it to be small enough to fit the samples I get every month. The Goofy's one fits a 140mm diameter filament sample at its smallest. Mine fits a…

Downloads
139
Likes
32
Rating
4.86
P
PrintablesNadir @ CN3D

Sovol SV08 Mount for Makerbase MKS IPS50 5Inch

Later Edit: updated to compensate for the pins that are sticking out thanks to our member DevoidTV all the help. if you printed the design already you can snip this pin out or print the new version. also I have increased the cutouts for…

Downloads
139
Likes
33
Rating
4.75
P
Printableshurzhurz

Cover for Makerbase MKS SERVO57C NEMA23 closed loop stepper motor driver

This is an alternative cover/case to the one that Makerbase offers on GitHub ( https://github.com/makerbase-mks/MKS-SERVO57C/tree/main/Shell%20file ). It can easily be printed without support on a FDM printer. Category: DIY

Downloads
138
Likes
6
Rating
0
P
Printablesjkavalik

Tinkerbell (multi-material remix)

Multi-material remix. Wings can be printed in place or separately (it will be a very tight fit, some sanding probably required).

Downloads
134
Likes
17
Rating
0
P
PrintablesMandicReally

MakerBot Replicator - REPAIRED CAD Files

Make a MakerBot! Replicate with a Replicator! This is the Original MakerBot Replicator CAD file. It is still available for download on Thingiverse HERE , but the files are missing some key components and it will not open properly in…

Downloads
133
Likes
17
Rating
0
P
PrintablesNadir @ CN3D

Sovol SV08 Mount for Makerbase MKS IPS50 5Inch

WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. Makerbase MKS IPS50 5Inch Display Integrated in the top hat we made for the Sovol SV08 All the files are already in the correct orientation and…

Downloads
133
Likes
31
Rating
5
P
PrintablesZafirah3Dprint

Z-MINIS TINKERBELL FOR FREE

Hi! I hope you like my designs. If you have any special design or vector you want to turn into a 3d printable model you can ask me, I can design it for you! Hola! Espero te gusten mis diseños. Si tienes algún diseño de vector en especial…

Downloads
131
Likes
21
Rating
0
P
PrintablesRazzer09

Tinkerbell

Simple 2D model of Tinkerbell

Downloads
129
Likes
12
Rating
0
P
Printablesgeektoybox

6.5" Basic Speakerbox for vehicle

I needed a place to mount my speakers in my doors so I whipped this up. Fits in my VW Bus perfectly. Prints in 2 parts that need to be glued together. Pardon the dirty door. Bus is a WIP. Give me a heart if you like it and don't forget to…

Downloads
128
Likes
22
Rating
0
P
PrintablesMarco Lebdech

Mini Cars - Crackerbox Truck

This is the first model included in my series of tiny car (not realistic) models. I really like those old GMC Crackerbox trucks... Dimensions (version 1) Width: 13mm Height: 16.5mm (approx.) Length: 24mm Wheel base: 16mm Wheel size: 5.6mm…

Downloads
127
Likes
13
Rating
5
P
PrintablesJohn Kinsella

Tinkerboard 2S case with organic top

I got the idea for this, after seeing @yaniv_193818 's great case for the Tinkerboard S. With the heat sink, I couldn't do the sliding top, and also I got the idea to make this organic-looking shape. Prints well with PLA, .20 speed or…

Downloads
127
Likes
9
Rating
0
P
PrintablesDohara

Tinkerbell silo Earrings

Tinkerbell Silo Earring Not all filaments are made the same. I use Bambu and or matte filaments mostly because I can print thinner layers and achieve the best color results. Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at…

Downloads
125
Likes
29
Rating
0
P
PrintablesMediaMan3D

Makerbot Robot - weaponized & wider joints

I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got…

Downloads
124
Likes
12
Rating
0
P
PrintablesYuri

Tinkerbel cutter

Fairy shaped cutter. Print instructions Category: Kitchen & Dining

Downloads
123
Likes
14
Rating
0
P
PrintablesTheNewHobbyist

MakerbotTV TV Stand for iPhone

Watch Makerbot TV in style or any video for that matter. Kick back and watch some mini tv (fits perfectly in most studio apartments). This an entry for the "The Absurd iPhone Accessory Contest". I've included the knobs and TV stand…

Downloads
114
Likes
27
Rating
0
P
Printablescalebprints

Makerbot robot

The maker faire makerbot robot.

Downloads
111
Likes
9
Rating
0
P
Printablesthrasher

Makerbot Mini Large Spool Holder

This is a spool holder that mounts to the back metal plate of a Makerbot Mini, to hold much larger spools. Only three parts are needed, and they can all be printed on a Mini, and snap together for a clean look. There were other great…

Downloads
111
Likes
5
Rating
0
P
PrintablesSatellietje

Tinkerbell Christmas window ornament

You are doing me a big favor by clicking the Like button :-) Tinkerbell ornament to place in the window. It is translucent. Print all parts with 0.25 nozzle 0.10 layer height

Downloads
110
Likes
46
Rating
0
P
PrintablesMarco Lebdech

Mini Cars 128 - Crackerbox Truck

This a first model of tiny scaled (128:1) print-in-place models. This one is a scale model of Crackerbox truck and also update of This model to be in scale. As a drawback, this one is a lot bigger than the original one. Dimensions…

Downloads
109
Likes
9
Rating
5
P
PrintablesJorge_dPO

MakerBot Headphone Stand with Curved Rest

I just took what I liked from the two stands and merge them togather. This way the nice desing of the makerbot stand has also a really nice rest. -I recomend using tree supports.

Downloads
106
Likes
10
Rating
0
P
PrintablesCowwolfe

Filament Reel For "MakerBox" Filaments

I was looking for a good way to hold several samples at once from the Makerbox Sample Kit. Lots of good ideas out there from fellow Makers. I wanted to put my own filament spin on things and came up with this model. The is a Main Reel…

Downloads
102
Likes
9
Rating
0
P
PrintablesBigH

TexRC KerbTex Hairpin Corner

Overview TexRC KerbTex Hairpin Corner to fit 65mm square downpipe. The corner can be used to connect downpipes sections together to create an RC car track. See my other projects for 90 degree corners and 45 degree corners.…

Downloads
101
Likes
5
Rating
0
P
Printablesjaztermareal

Jin Roh Kerberos Panzer Cop riot shield for 1:12, 1:6 figures and cosplay

Kerberos Panzer Cop riot shield from the anime Jin Roh for custom 1:12 scale 6 inch and 1:6 scale 12 inch figures plus 1:1 scale for cosplay. I may do more Kerberos stuff in future as I gradually tick projects off my to make list. I also…

Downloads
100
Likes
13
Rating
0
P
PrintablesIvoryHammer

Kerbal Space Program R&D Center

The full R&D center from KSP, I printed it in a copper silk pla so it looks a bit odd. IMO this is one that deserves to be printed as big as possible so you can see more of the detail.

Downloads
99
Likes
12
Rating
5
P
PrintablesStormCrow 13

Wickerbough Elder

“Living scarecrows make a mockery of the natural order. Dead ones make fine hats.” Worth noting that the scarecrows of Shadowmoor are potentially made from the wood of dead treefolk. If you want to help me keep making free models or want…

Downloads
99
Likes
35
Rating
0
P
PrintablesChris Mayhew

Makerbeam Compatible 10x10 Right Angle Bracket

So I was ordering some Makerbeam 10x10mm frame but they had no right angle brackets in stock at the time of ordering and I couldn't wait for them to come back in stock so I decided to just 3D Print some. These will fit 10x10mm Makerbeam.…

Downloads
99
Likes
13
Rating
5
P
Printablestowilab

Kosel Makerbase MKS Robin Nano + Raspberry Pi Board Holder

Kosel Board halter für ein Makerbase MKS Robin Nano und ein Raspberry Pi Board Holder. Die Länge beträgt 170mm x 60mm und passt in ein Kossel Pro.

Downloads
95
Likes
5
Rating
0
P
PrintablesKiNG Prints

1515 Extrusion Snap in M3 Nut - Voron V0 - Makerbeam XL

I Modified Oleynicks flat snap in nut slightly to have a small bump inside to help thickness and how tight it is. Print Settings: 0.08 Layer Height 6 walls 0.4 line width

Downloads
94
Likes
8
Rating
0
P
PrintablesGlenn Brockett

Makerbeam Xl model

Modeled from the MakerbeamXL specifications, without threads. I wouldn't make anything rigid from it, but it is good for modeling other parts to. If you have a file format you want, ask, I can likely export it. (built in OnShape.)

Downloads
93
Likes
9
Rating
0
P
PrintablesLowkey

Prusa Mk3 Mini Chess Set with Chessboard / Checkerboard

Included is a complete chess set with chessboard. All pieces are custom made, but still reflect the vintage look. My son has gotten into chess, so I decided to make a game for us to use just about anywhere without having to carry around a…

Downloads
92
Likes
7
Rating
0
P
PrintablesSkullKill

Switchboard Breakerboard Blanking Plate

Migrating from thingiverse https://www.thingiverse.com/thing:3989346 the blanking plate in my breakerbox / switchboard / meter box was getting old, and breaking apart. design this replacement for them, the default Switchboard Breakerboard…

Downloads
91
Likes
8
Rating
5
P
Printablesstayzeef

Kerbal Mechanical Keyboard Keycap

I spent 10 minutes in Blender (which I'm terrible at) because a reddit post pissed me off. I haven't printed this yet so no idea if it'll fit at the current size. Category: Electronics

Downloads
90
Likes
10
Rating
0
P
PrintablesMrFlippant

Flat Kerb/Curb Inserts for Scalextric Sport 1/32 track borders

This old version doesn't work as well as the new ones I just designed from scratch. The new ones also have tiling for you multicolor printers out there! https://www.printables.com/model/754536-scalextric-flat-kerb-inserts-v2 Did you miss…

Downloads
90
Likes
12
Rating
5
P
PrintablesTadTadd

HackerBox #0089 - Case for "WiSPY" wardriving kit

HackerBox #0089 came with a fun Wardriving project built on a main circuit board with external antennas and a microscopic display board. Here's the product page Here's the build instructions This should print nicely in whatever PLA you…

Downloads
90
Likes
15
Rating
0
P
PrintablesLost Carrier

IKEA SOCKERBIT Wall Bracket

I've used Extrudr NX2 PLA, but any other should do as well. Obviously no supports and stuff. Infill is 20%, but increased to 100% around the screwholes - drop the 3MF into PrusaSlicer if you not want to fiddle around with this (or look it…

Downloads
89
Likes
14
Rating
3
P
PrintablesSpeedyBP

Schoner für Schraubstock 100mm mit Einkerbungen für Rundmaterial / Protector for 100mm vice with notches for round material

Ein paar einfache Schoner für Schraubstöcke mit 100mm Backen mit Einkerbungen für Rundmaterial. Die Schoner passen bei mir so genau, dass keine Magnete benötigt werden.

Downloads
87
Likes
9
Rating
0
P

Prusa Core One Wifi and GPIO Hackerbaord Cover: Remix with zip tie loops

This is a remix of dancan13f's excellent GPIO and wifi cover. Specifically, it is a remix of his V2 model. In addition to holding both the GPIO and wifi modules, this remix adds loops for zip ties to attach to. The idea is that zip ties…

Downloads
86
Likes
29
Rating
5
P
PrintablesJarfil

Brackets for 1010 (10mm) MakerBeam®

After making some plates , I still missed some kinds of brackets in my Makerbeam® set. Included is a FreeCAD file with customizable beam size, hole size, fillet. STLs generated with: target: 1010 aluminum extrusion, M3 screw holes unit…

Downloads
86
Likes
15
Rating
0
P
PrintablesJonas Burkhard

X Axis endstop mount for Bearmod and Makerbot endstop

In case you don't want to mess with sensorless homing you can clip this part onto the upper smooth rod and mount a Makerbot endstop to it. Works alright on my printer.

Downloads
86
Likes
4
Rating
5
P
PrintablesGamingOnTheBike

Spool winder for makerbot spools

Spool winder for an electric drill This is made for makerbot spools but can also be used for other spools ranging from 40mm to 60mm ish it's designed for a 12mm bolt with 28mm washers Sorry for bad camera quality Print instructions…

Downloads
86
Likes
4
Rating
0
P
PrintablesDohara

Tinkerbell Earrings

Tinkerbell Earrings I print all my earrings and keychains with a .2 Nozzle. If you are using a .4 nozzle, please do not complain if there is issues. My earrings are designed and test printed with a .2 nozzle. A .4 can not achieve the same…

Downloads
85
Likes
44
Rating
0
P
PrintablesDrLinzi

Checkerboard Manta Ray (MMU) with Eyes

A remix from the original manta ray but I added eyes and pre-coloured a checkerboard pattern on the body

Downloads
84
Likes
9
Rating
0

Wall TinkerBell - Fée Clochette

Wall decoration on the Tinkerbell the best is to print front side towards the plate for a better rendering 1M X 1.4M at 100%

Downloads
84
Likes
29
Rating
0
P
PrintablesRH3D

IKEA Sockerbit clip lock

Simple clip lock for IKEA Sockerbit boxes, tested on the bigger sizes but it should probably fit all.

Downloads
83
Likes
14
Rating
3
P
PrintablesLMaker

Makerbase MKS H43 Case & Support

Materials list: 1 unit MKS H43 2 units DIN912 M3x18 2 units DIN912 M3x12

Downloads
82
Likes
15
Rating
0
P

KSP2 Logo - Kerbal Space Program 2

Hey Here you can find the new KSP (Kerbal Space Program 2) logo as 3d printed display. So that you can build the whole thing, you need black, white and red filament. I have printed it with PLA. Additionally you need some glue. One big…

Downloads
81
Likes
17
Rating
0