Search results: keyboa

Sort order

3,429 models

P
PrintablesReferentiel

Keyboard storage structure

! Commercial use prohibited ! If you want to use it elsewhere than on Printables, contact me to purchase a license. ______________________________________________________________________________________________________________ Don't…

Downloads
7,256
Likes
4,310
Rating
4.91
P
PrintablesBennacerismo

Apple Magic Keyboard 2-in-1: Raiser and vertical stand

all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…

Downloads
634
Likes
61
Rating
4.8
P
PrintablesThorsager

Magic Keyboard and Trackpad thing..

After many many years of just working on my MacBook Pro, I finally got a “Magic Keyboard" and “Magic Trackpad” and started working in a more “Desktop kinda way”. But the Trackpad was never where i wanted i to be… So I created this “Thing”…

Downloads
568
Likes
88
Rating
5
P
PrintablesKimframes

1-key Cherry MX macro keyboard

1-key cherry mx macro keyboard for use with the digispark, because sometimes, only one key is needed.

Downloads
528
Likes
56
Rating
5
P
PrintablesJackson O'Steen

Mechanical Keyboard Fidget

Just a fun little fidget that just requires a mechanical switch and a keycap. Had a lot of fun making it and it is now a permanent part of my desk. Thanks for checking it out, and happy printing :)

Downloads
427
Likes
34
Rating
0
P
PrintablesShaxo

Keyboard holder

Since I've got two keyboards on my desk (one suits best for gaming, the other one for hours of typing), I wanted to clear my tabletop or at least organise it in some way. I found some keyboardholders, but in fact they were just too bulky.…

Downloads
389
Likes
62
Rating
5
P
Printablesncsandor

Honeycomb Wall Keyboard Holder - Support-free Remix

Print Tips The normal size version should be fine for most average keyboards. Can add two small (10mm diameter) helper discs to the model in the slicer (as shown in the attached 3mf file) so we can be more relaxed about printing.…

Downloads
340
Likes
54
Rating
5
P
PrintablesInkarium

Stand for Magic Keyboard / Magic Trackpad (2 locations)

Why I created support? I wanted to be able to put my Magic Keyboard vertically on a support but I could not find any model, this in order to make room on my desk to be able to use the most space to be able to work. So I created my own…

Downloads
272
Likes
44
Rating
5
P
PrintablesBennacerismo

Logitech G915/815/ Apple Magic Keyboard 1 2 vertical keyboard stand with joined parts

Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well

Downloads
263
Likes
27
Rating
5
P
PrintablesKimframes

3-key Cherry MX macro keyboard

3-key Cherry MX macro keyboard designed for the micro USB version of the Digispark. Make sure everything works before pushing in the Digispark. Testing code: include "DigiKeyboard.h" void setup() { pinMode(0, INPUT); pinMode(1, INPUT);…

Downloads
256
Likes
64
Rating
5
P
PrintablesJake Reeves

Open Case - 3D Printed Keychron V1 Max Keyboard Case

For a few years now, I've wanted to design a 3D printable keyboard case… Now, with the XL I finally have the build volume to manage it! I designed this fully 3D printable case as a replacement for the basic one that comes with the…

Downloads
254
Likes
32
Rating
0
P
PrintablesWim V

Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard

Replacement Keyboard Foot for Microsoft Natural Ergonomic 4000 Keyboard ( KU - 0462) . I had an old computer which I refurbished to donate. Used my printer to replace the broken feet of the keyboard with a designed new one, because I…

Downloads
224
Likes
12
Rating
5
P
PrintablesJavild

Mechanical Keyboard Display Stand - Single, Double, and Triple Keyboards

This print is perfect for displaying your mechanical keyboards. It's available in a single, double, and triple keyboard configuration. The design is inspired by the KeebMonkey Acrylic Keyboard Display Stand . Depending on your printer's…

Downloads
191
Likes
20
Rating
0
P
PrintablesMeeshoot

Ergodox - keyboard support

This support has an angle of 20 degrees and the same model can be used for left and right keyboard part. Print settings suggestion : 0.8 mm nozzle 0.40 mm layer height no support 15% infill PLA

Downloads
186
Likes
18
Rating
0
P
PrintablesBennacerismo

Apple Magic Keyboard and Trackpad Desk Stand

Apple Magic Keyboard and Trackpad Desk Stand V1

Downloads
172
Likes
20
Rating
5
P
PrintablesElmonito
Downloads
154
Likes
11
Rating
0
P
Printablesbear454

Translucent keycaps for Launch keyboard

I love my System76 Launch keyboard, but I don't love the ‘daylight’ keycaps. I wanted some ‘pudding’ style keycaps, with black tops and translucent bodies & legends. Due to the atypical sizes of keys used on the Launch, most retail…

Downloads
147
Likes
53
Rating
0
P
PrintablesBubble Paxi

Keyboard Holder for Cintiq 24' and 27'

Keyboard (or anything else) holder for Cintiq tablet

Downloads
124
Likes
10
Rating
0
P
PrintablesNakapan

Keyboard feet for HP KU-0316 keyboard

I recommend you print left and right part, even if you need only one replacement. Reason is that these parts are not 100% same size as originals. If you leave one original part, keyboard might not be levelled. Print settings: 0,1 or 0,12…

Downloads
113
Likes
2
Rating
5
P
PrintablesMaxximum

Mxx60 - 60% Gasket Mount Mechanical Keyboard Case

DO NOT DOWNLOAD THIS! Download the R2 instead! It is improved in everyway! R2 COMING SOONtm Update: Tightened up the usb port cut out on bottom_1 and fixed wk tops, Fixed plates, fixed wkl top 2 This is a 60% board designed to use…

Downloads
112
Likes
17
Rating
0
P
PrintablesFelipe Coury

Collide F39 Keyboard Case

Case for the Collide 39 keyboard kit by SpaceCat Designs inspired by the Kishsaver keyboard: https://spacecat.design/products/collide39-pcb-kits Print instructions Print the top with the plate facing down and the bottom with the bottom…

Downloads
82
Likes
16
Rating
0
P
PrintablesXenGi

Noisy Cricket (Mini Gaming Keyboard)

The Noisy Cricket (Mini Gaming Keyboard) A minimal keyboard with just the basic keys for gaming on the go. Mostly targeted at FPS games with a focus on W A S D . The layout can be customized via the QMK firmware. The default layout looks…

Downloads
79
Likes
37
Rating
0
P
Printableswallace

ThinkPad TrackPoint Keyboard Smartphone/Tablet Stand

This is a remix of a beautiful and thoughtful model by CodeNameX from Thingiverse. I tweaked 3 things: Steeper angle for the device - it'll now face towards you Easily accommodate thicker devices Shorter back support to avoid collision…

Downloads
66
Likes
10
Rating
5
P
Printablesdereksrose

Snug Fit Logitech K860 7 degree keyboard foot

I used the last version of my keyboard foot successfully until we got a new cat who flopped his entire 14lbs onto the bottom edge of my keyboard. This resulted in these tiny molded plastic stabilizing fins to break off on one side of the…

Downloads
63
Likes
2
Rating
0
P
PrintablesOpari3D

Piano Keyboard Template

Simple plantilla para piano o teclado para poder apuntar melodias cuando lo necesites , se a impreso en PLA Winkle negro , disfrute imprimiendolo y modificandolo a su gusto . Simple template for piano or keyboard to be able to write down…

Downloads
60
Likes
24
Rating
5

Leg for keyboard Logitech Deluxe 250

Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.

Downloads
52
Likes
4
Rating
0
P
Printablesk.yoshioka

Custom wrist rest for Keychron keyboard Q8,Q10.

Large wrist rest for Keychron keyboard Q8 and Q10. You can put magic trackpad on the center of this wrist rest, but if you don't have magic trackpad or wouldn't put it on the wrist rest, I prepared dummy trackpad parts. The wist rest has…

Downloads
46
Likes
12
Rating
0
P
Printablescocian

"Keychron K4" front row keyboard case USB only

left part, right part and center clips needs to put the joiner bars (wood or something) on front and back outside without keyboard foots, bluetooth, and easy switching Win-Mac I gave up the battery space for bluetooth.

Downloads
45
Likes
12
Rating
0
P
PrintablesTedd007

keyboard stand, HP KU-0316

Replacement for the original keyboard stand. Slanted on the underside to ensure a straight surface on the table. Simply click in, set up, done. Upate 11.03.26: longer version added ---------- print settings PETG 0.2mm layer 20% infill…

Downloads
40
Likes
2
Rating
3
P
Printablestdwalton

Tripod Mount for ZSA Voyager Keyboard

The black mount featured in the cover photo is the newer slim model using heat-set inserts. For the other red model I used embedded 7/16 nuts with ¼ x 20 thread, for the tripod connection, instead of heat-set inserts, in case you don't…

Downloads
34
Likes
3
Rating
0
P
PrintablesVersiXP

Taller stand for Yamaha reface Series Keyboards

As in the title, it is a 7cm taller stand for Yamaha reface Series Keyboards. It makes it possible to have 2 Yamaha reface Series Keyboards on your Desk, and that you can connect both at the samt time!…

Downloads
32
Likes
3
Rating
0
P
PrintablesThomasZecher

Keyboard Foot Hama

Keyboard Foot Hama Tastatur Fuß für Hama Tastatur

Downloads
28
Likes
2
Rating
0
P
PrintablesZbyněk Král

HP Keyboard Leg Extension

When typing on the computer, I like the keyboard to be tilted. Unfortunately, the legs of this keyboard are too short, and the tilt is therefore small. A simple extension of the keyboard legs solves everything. Print instructions:…

Downloads
28
Likes
4
Rating
0
P
PrintablesEta

DasKeyboard X50Q Legs Extender

Got a new keyboard did not like the height of the legs so i quickly designed some new legs, double the height. i made custom support on the round thing that goes in the keyboard that need to be snipped off with flush cutters or a file.

Downloads
18
Likes
0
Rating
0
P
PrintablesEdison82

IKEA PAX Side Hooks – Convenient Keyboard Storage Solution

IKEA PAX Side Hooks – Convenient Keyboard Storage Solution Maximize the functionality of your IKEA PAX wardrobe with these custom-designed side hooks! Perfect for hanging keyboards, headphones, or other accessories, these hooks are a…

Downloads
15
Likes
5
Rating
0
P
PrintablesJN VIDEOS

Logitech MX Modular Desk Dock-Ergonomic Keyboard Stand & Desk Organizer

Logitech MX Modular Desk Dock – Ergonomic 10° Elevation, Tablet Mount & Ruler Vault Integrated Secondary Storage: Capitalizes on the hollow space on the side of the the elevated keyboard frame to store drafting and measuring tools.…

Downloads
13
Likes
7
Rating
0
P
PrintablesJSEngineering

Logitech keyboard leg (20mm wide, 26mm long)

Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.

Downloads
12
Likes
0
Rating
5
P
PrintablesDingo_aus

iPad2 to iPad 5th Generation adaptor for bluetooth keyboards

This adapter allows for using a 5 Generation iPad with a Bluetooth keyboard designed for an iPad 2. This adapter receives the iPad 5th Generation and mimics the shape of the edge of an iPad2 so that the iPad 2 can be placed in a Bluetooth…

Downloads
11
Likes
0
Rating
0
P
PrintablesGraubart

Hama Keyboard repair foot

Lost one foot for the Hama K210 Keyboard - so I made two new ones. The slot with for the foot is approx 18mm In case this is useful for you please leave a like

Downloads
7
Likes
1
Rating
0
P
PrintablesThe Consul

Keyboard Tray Cable Route

Meant to hold cables so it doesn't have to bend too much and ruin the cable

Downloads
3
Likes
0
Rating
0
P
Printablesvoxo3d

Cute Cat Paw Clicker - No Keyboard Switch Required

This cat paw-shaped stress-relief clicker features a 3D-printable spring , allowing use without a keyboard switch. However, we strongly recommend adding a keyboard switch for optimal clicking performance and tactile feedback. Key…

Downloads
12,022
Likes
1,025
Rating
4.67

Keyboard Clicker Fidgets With custom/reg keycaps

This is a fun little clicker toy for you to enjoy! Please like and boost this project. Thank you. Happy Clicking. For Custom Keycaps: 1. Download the Model and import it into your slicer 2. Add another blank print plate 3. Click and drag…

Downloads
9,577
Likes
785
Rating
4.76
P
PrintablesMonsieur-Pierre

Charizard Pokemon Keyboard Keycap MX

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Epic Charizard-inspired keycap for custom keyboards.…

Downloads
6,980
Likes
1,423
Rating
5
P
Printablestrashcandrummer

TrashiStand (Mechanical Keyboard Stand)

Models TrashiStand Default keyboard stand (main model) TrashiStand XL Same size but with small feet in front to support top-heavy keyboards (e.g. Model M) TrashiStand Mini Stand to display your Artisan collection. Now published as its own…

Downloads
6,454
Likes
755
Rating
4.97
P
PrintablesMonsieur-Pierre

Gengar Pokemon Keyboard Keycap MX

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial licenseL https://www.patreon.com/cw/MonsieurPierre Spooky Gengar-inspired keycap. Compatible with Cherry MX…

Downloads
5,550
Likes
1,165
Rating
5
P
PrintablesVOID

Corne keyboard case - 5 and 6 columns

Crkbd / Corne case compatible with v2 and v3 hotswap PCBs and fr4 switch plates. Builds pictured in this thing were purchased from 42keebs (the kit includes pcbs, trrs jacks, reset switches, diodes and hotswap sockets, top and bottom…

Downloads
5,189
Likes
415
Rating
4.85
P
Printablestrenton382

Simple Keyboard Clicker Fidget

This keyboard clicker fidget is a compact, satisfying fidget toy designed to replicate the feel of a mechanical keyboard keypress. Perfect for stress relief, focus, or just something to click while working. This model prints quickly (≈25…

Downloads
4,534
Likes
133
Rating
4.6
P
PrintablesBubbleology

Skadis 40% Keyboard Stand

A 3D printable Keyboard Stand for the Ikea Skadis Pegboard. It allows you to securely display your Keyboard on the pegboard. The stand was specifically designed for 40% (or smaller) keyboards but has been proven to also work for bigger…

Downloads
4,217
Likes
582
Rating
5
P
PrintablesAndrew312

Keyboard Switch Fidget

Printed mine in ABS with 3 walls and 20% infill, but I'm sure PLA and less infill would work just fine. I used these keycaps https://www.printables.com/model/399607-complete-cherry-mx-stem-keycap-set-optimized-for-3 Edit: Added V2 with…

Downloads
3,779
Likes
230
Rating
4.73
P
PrintablesNewtle Kim

3D Printed Mechanical Keyboard (68 keys)

I love Prusa signature color orange, black and gray. Inspired by these colors, I designed a Prusa-style mechanical keyboard. I also shared the Arduino code so that if you had a 3D printer, you could easily make a mechanical keyboard. All…

Downloads
3,646
Likes
384
Rating
5
P
PrintablesJordi

Mechanical keyboard MX switch puller

Tolerances will be tight but it works fine for me, if you encounter any compatibility problems leave feedback and I will adjust the model. I also provide two different versions so you can pick the handle type that you prefer. Version 2…

Downloads
3,391
Likes
142
Rating
4.53
P
PrintablesTechnofrikus

Skadis Pegboard keyboard holder v1.5 - now also for splits

UPDATE Aug 26: Now with versions for split keyboards, putting them on stacked, like in this remix: https://www.printables.com/model/339257-skadis-pegboard-keyboard-holder - with and without hooks and different lengths. - Only in the round…

Downloads
3,157
Likes
499
Rating
4.92
P
Printablessmallr

Heavy Duty Keyboard Holder (No Supports)

YouTube video: This is a keyboard holder. It holds keyboards and it does it well. I made it to fit my 60-65-75% boards but not all boards will fit, I'm working on a 80% version now. (available as experimental) I feel like we need more…

Downloads
3,049
Likes
1,074
Rating
5
P
Printablesseegerg

keyboard fidget print in place, NO SWITCHES NEED!

share your opinion in the comments!

Downloads
2,934
Likes
104
Rating
2.4
P
Printablesnoahimhere

Keyboard switch

A keyboard switch model that I decided to upload from my old blender project. Almost 1:1 scale.

Downloads
2,466
Likes
52
Rating
1
P
PrintablesAndrew Geltz

Low-Poly Bulbasaur fidget with Cherry MX keyboard switch

Required hardware: 1x Cherry MX switch or compatible alternative, bonus points for clicky Assembly instructions: Print both parts Insert the switch into the main body When connecting the plant/back to the switch, be very careful to align…

Downloads
2,330
Likes
359
Rating
4.94
P
PrintablesJonS

Creeper Clicker and Fidget (Keyboard Switch Based) with Moving Legs

Assembly video: Update: Version 2 Added. Most people with a well-dialed in printer should use this new version. This Minecraft Creeper fidget toy uses a Cherry MX keyboard switch, or similar (I’m using a cheap Outemu Clicky Green switch…

Downloads
2,259
Likes
454
Rating
4.92
P
PrintablesAgustin Arroyo

Gen 1 Starters - Keyboard clickers

Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Thangs and…

Downloads
2,071
Likes
605
Rating
4.92
P
PrintablesMonsieur-Pierre

Pikachu Pokemon Keyboard Keycap MX

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Happy Pikachu-inspired keycap for mechanical keyboards.…

Downloads
1,988
Likes
500
Rating
5
P
Printablesjoelcoster

Mechanical Keyboard Display Stand

A stand to display your mechanical keyboards. Since the left and right stand are identical the print file only contains one. Simply print two for a full set. Displays keyboards at a 60 degree angle Supports keyboards with up to a 2.5cm…

Downloads
1,944
Likes
189
Rating
4.92
P

1.75u shift & 1.00u OEM keycaps for 65% Keyboards (Keychron K6)

Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…

Downloads
1,881
Likes
72
Rating
4.83
P
PrintablesDanyal

Corne Keyboard Case

A basic case for the corne , with added hexagonal holes in the bottom to make it lighter and faster to print while allowing the PCB underglow to shine a little better. The mouting holes are in the standard position. The holes may be…

Downloads
1,787
Likes
188
Rating
5
P
PrintablesMad Mod Labs

MECHANICAL KEYBOARD - 68 KEY - 65%

Please check out the assembly tutorial for this project: Update 10/31/2022: Added ISO layout plate version. This keyboard is a revision of a 3D printed Keyboard originally designed my Thingiverse user Fumbucker:…

Downloads
1,781
Likes
279
Rating
4.88
P
Printablesslabua

Heltec LoRa32 V3 Meshtastic Case with Encoder/Buzzer/GPS/Environment sensor, M5Stack CardKB Keyboard-ready

Inspired by the flowing lines of muzi's H1 case , my case allows for the following components to be used in your Meshtastic setup: BME280 module for reporting temperature, humidity, pressure, air quality, ... Buzzer for audible…

Downloads
1,769
Likes
432
Rating
4.78
P
PrintablesLogitech

Official MX Keyboard CAD Templates

Official Reference CAD Envelopes for Logitech Keyboards Provided as part of Logitech’s Adaptive & Accessibility Initiative , this package contains simplified 3D reference models (dummy CAD envelopes) for three of our flagship keyboards:…

Downloads
1,738
Likes
392
Rating
3.25
P
PrintablesPeter Martin

Keyboard / Tablet Stand - Adjustable Tilt

KEYBOARD OR TABLET STAND 14 Sept 2024 - New design available :- Desktop Tablet Stand and Organiser by Peter Martin | Download free STL model | Printables.com Decided to design a keyboard stand, a few iterations later this is the result. I…

Downloads
1,725
Likes
535
Rating
5
P
PrintablesOriol3D

Keyboard Stand

Stand to display your custom mechanical keyboards. Purchase printed design on my Etsy store: https://www.etsy.com/listing/1227533573/custom-keyboard-stand-colors-in

Downloads
1,624
Likes
183
Rating
4.81
P
Printablesstarry knight

Holy60 Keyboard Case

This is my take on the holy60 case from kbdfans. I wanted to build a keyboard with this case but thought the price was pretty high. So, I thought I could recreate it to be 3d printable. The main CAD file is unsplit, but to fit on most…

Downloads
1,595
Likes
73
Rating
3.5
P
Printablesskopjanecot

Skadis 75% Keyboard Stand (Holder)

A rework of the Skadis 40% Keyboard Stand to fit 75% and larger keyboards due to the original being too small for them and having them rest on the pegboard instead. Changed to a bit more rounded aesthetic and an inclination of 10%. Use…

Downloads
1,585
Likes
254
Rating
4.87
P
PrintablesBondFire

KEYBOARD FIDGET-fidget!

Hi I made adictive FIDGET KEYBOARD !! NO SUPPORT NEEDED!!! ITS Fully 3D PRINTED !! NO MECHANICAL PARTS NEEDED!!! The Lube or oil are optional you can use oil from your printer!l!! You can little bit stretch the spring for more resistance…

Downloads
1,579
Likes
93
Rating
2.67
P
Printables_bwprobably

Keyboard Wall Hanger

I wanted a wall mount set for my mechanical keyboards to: get them off my desk, display them for all to see, fill in some very sad open space on my wall. I screwed them into the wall with 1 1/2 in drywall screws, that's it. They're…

Downloads
1,560
Likes
80
Rating
5
P
PrintablesLeonic

Keyboard stand2--Dual-Mode Vertical & Horizontal Stand Version

Description Keyboard stand, with an optimal ergonomic angle design, very comfortable for long-term use without wrist pain. Keyboard Stand with Upright Mode — Significantly Saves Desk Space Dual-Mode Keyboard Stand (Vertical & Horizontal)…

Downloads
1,560
Likes
335
Rating
4.8
P
PrintablesDendar

Keycap Adapter for membrane keyboard

This print allows you to put cherry profile keycaps onto a membrane keyboard. There are two files, one with and one without the “nub”. The mechanical keyboard I have, Razer Ornata Chroma, has a mechanical aspect to it, so the nub is…

Downloads
1,526
Likes
67
Rating
4
P
PrintablesExtra Fox

Keyboard & Mouse Wrist Rests

I designed this set of wrist rests for your Keyboard and Mouse. The keyboard wrist rest is designed as a split pair. I tend to swap out my keyboards between several different styles (standard, split, Alice, etc.) so having a wrist rest…

Downloads
1,523
Likes
202
Rating
4.81
P
PrintablesFaLk

Mechanical Keyboard Switch Keychains

Generated main body using https://www.thingiverse.com/thing:4120804 and then modified the design to turn it into a keychain.

Downloads
1,521
Likes
109
Rating
4.8
P
PrintablesGuido3D

Logitech keyboard feet (k375s and others)

The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…

Downloads
1,512
Likes
116
Rating
4.81
P
PrintablesBarelygud

ClickPocket V2 (Keyboard Switch Fidget)

Keyboard Switch Fidget V2 — Bigger, Better, Quieter to print The satisfying clicky fidget is back, rebuilt from scratch. If you've seen (or printed) the original Keyboard Switch Fidget , you know the concept: a palm-sized 3D printed body…

Downloads
1,438
Likes
113
Rating
5
P
Printablesjosepilar

Gateron - Mechanical keyboard fidget switch keychain

Remix of the original model so the key cap can fit gateron stem types

Downloads
1,427
Likes
42
Rating
5
P
PrintablesTKS

Simple keyboard stand

I created a slanted keyboard stand aimed at reducing the stress associated with keyboard input tasks. Using this model, you can achieve an approximate 22° incline for your keyboard. Personally, I have found it increases comfort. Both…

Downloads
1,424
Likes
256
Rating
4.82
P
Printablesrianlian7

Mech Keyboard Switch Keychain

This is just a simple keychain where you can place your mechanical keyboard switch. I use it to fidget sometimes. I made this using Fusion 360. Edit 2022 April 26: Fixed the 1slot keychain for being too loose. Edit 2024 April 28: Added 3…

Downloads
1,406
Likes
79
Rating
5
P
PrintablesArtSuzhou

Swing-Out Under-Desk Keyboard Tray

I designed this 3D printable swing-out keyboard tray support to make the Logitech MX Mechanical Keyboard easier to position and access, especially for users who may have difficulty reaching a keyboard placed on top of a desk. The…

Downloads
1,397
Likes
1,112
Rating
3.5
P
PrintablesGalindof

Keyboard Wall Mount Hooks (Command Strip)

Keyboard Wall Mount Hooks designed to be used with 3M Large Command Strips. Each design has a small lip around the command strip above and to the outside. Works great. Print instructions Printed on Prusa Mini with 0.2mm layer height and…

Downloads
1,377
Likes
163
Rating
5
P
PrintablesMonsieur-Pierre

Snorlax Pokemon Keyboard Keycap MX

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Sleepy Snorlax-themed keycap. Compatible with MX…

Downloads
1,352
Likes
239
Rating
0
P
Printables3DPrintSOS

Mechanical Keyboard - SiCK-68

Was absolutely stunned by @Druz320 Canoe inspired SMOLBOAT case. I had to have it...but it was for ortho keyboards, too large to print, and I wanted to use my teensy mount as well as other things I learned from my previous keyboards.…

Downloads
1,336
Likes
317
Rating
4.82
P
Printablesthat1guy

Keyboard Fidget

This is a great fidget toy for all ages just print this model and grab some keyboard switches and Keycaps (printable) and start to enjoy. A great gift for travelers as it can be used as a keychain.

Downloads
1,319
Likes
122
Rating
0
P
PrintablesActiveB1t

Fidget clicker ring for mechanical keyboard switch

The model is a simple, pleasant to hold ring. It's designed to hold a mechanical keyboard switch, giving flexibility in clicky-ness and feel of the keycap (optional). It can be used to fidget with in many different ways, and is easy and…

Downloads
1,305
Likes
147
Rating
4.5
P
Printablesxtrusion

Keyboard mechanical switch fidget toy

Fidget toy using 6 keyboard mechanical switches. I tried Cherry and Gateron switches and both brand swiches fit perfectly. Printing with supports is recommend for best results. It can also be printed facing one of the cube corners on the…

Downloads
1,259
Likes
226
Rating
4.83
P
Printablesmanyshrimp

Clicky Fidget Easter Egg with Chick Inside (uses mechanical keyboard switch)

The top eggshell will snap onto the top of the chick so it stays put while you have fun clicking! Fidget with or without the eggshell on top. Parts needed - MX Style Mechanical Keyboard switch Print with supports on auto, all in the…

Downloads
1,258
Likes
196
Rating
4.67
P
Printablesmanyshrimp

Clicky Fidget Toy Inspired by Minecraft Shulker - Uses Keyboard Switches

This uses two mechanical keyboard switches to make a moving shulker fidget toy. The box in the picture is fully open, and upon pressing the top, it closes fully and bounces back. Very fun to play with and a fun desk ornament or fidget…

Downloads
1,256
Likes
450
Rating
4.5
P
Printablesnotcolin

Underdesk Desktop Keyboard Mount

More often than not I would find that my keyboard is taking up valuable desk space while painting. Finally got around to making this quick little under-desk mount so I can quickly tuck it away within arms reach when not needed. Currently…

Downloads
1,248
Likes
186
Rating
5
P
Printablesbraga3dprint

Keyboard Wrist Rest Type Comfy

The Keyboard Wrist Rest Type Comfy is a must-have for all typing enthusiasts. If your printer bed is too small to print the full rest, you can still enjoy its benefits by printing the sliced version in two parts. The dimensions of the…

Downloads
1,245
Likes
141
Rating
4.67
P
PrintablesBurgessG

Keyboard Feet

As I'm sure everyone who's ever used a keyboard knows, the feet will eventually break. Or maybe I'm just a angry typist! ;-) Whelp, another keyboard and another broken foot. Not my fault this time, it came that way. Tired of making do and…

Downloads
1,228
Likes
126
Rating
4.91
P
Printablesjimpjorps

Steelseries Apex keyboard replacement foot

My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…

Downloads
1,218
Likes
41
Rating
4
P
PrintablesFonz

Mechanical Keyboard Switch Lube Station

Always wanted a nice custom lube station to go with your premium mechanical keyboard? No money for the next GMK group buy? Why not brighten up your lubing chores with a lube rectangle you can really call your own. Or just showcase your…

Downloads
1,200
Likes
248
Rating
5
P
PrintablesPjtrQ

Keyboard feet (Logitech K270)

Keyboard feet for logitech k270 Printed in PLA

Downloads
1,187
Likes
59
Rating
4.93
P
PrintablesBarelygud

Keyboard switch fidget (1 to 3 switches to choose)

If you love fidget toys and keyboards, just one of those things, or simply want something quick to finish your filament spool, this is the model for you. I designed this fidget switch toy that only needs 1 to 3 mechanical keyboard…

Downloads
1,183
Likes
66
Rating
5
P
PrintablesEmatyk

Keyboard stand

Simple keyboard stand. Helps a lot with the lack of space on the desk. It's meant to level up the keyboard so it could go over the monitor stand. Can be easily printed flat without the supports.

Downloads
1,180
Likes
203
Rating
4.92
P
Printablesvkobz

Spring for keyboard switch fidgets

This spring is intended to replace a keyboard switch in any of my keyboard switch fidget tappers! It does not click, so it would be a good substitute if you prefer a silent fidget (or of course if you don't want to purchase keyboard…

Downloads
1,144
Likes
84
Rating
5
P
PrintablesCreativiMex

CS Keycap for mechanical keyboard

Mechanical keyboard version with the CS logo on it. Print as it is with supports. Print Settings Printer Brand: Anycubic Printer: Vyper Rafts: No Supports: Yes Resolution: 0.15 Infill: None Filament: Sunlu Pla+ White Category: Computer

Downloads
1,140
Likes
106
Rating
4.5