3,747 models
I needed a way to hold my sponges that allows them to drain and dry easily (not stacked up on top of one another), so I designed this quick model. It holds a scrub daddy (I cannot recommend this enough), a regular sponge, and another item…
Print approx. €5.09–€6.23 excl. taxPreliminary estimate for one variant
A compact kitchen holder designed for storing a dish sponge and hanging a kitchen rag or dishcloth. The base includes a removable grate with space underneath for water to drip and collect, helping the sponge dry more easily after use.…
Print approx. €5.60–€6.85 excl. taxPreliminary estimate for one variant
Simple sponge holder for kitchen sink. Very easy to print and keep your sink organize. Please feel free to download the version that you need. Happy printing and enjoy my design of the kitchen accessory.
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
larger compartments 80x35mm new design
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Hold your spoon and don't dirty your kitchen worktops Print in place
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
An enlargement of the stl model by 10% was used for the small packs and 65% for the large packs
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for one variant
--------------------------------------------------------------------------------------------------------- Be sure to orient the model so the large overhang is facing the print fan to avoid a saggy overhang.…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
A kitchen spatula
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A reimagined version of my old bin bag holder, which had a slightly too weak structure. The bin bag is easy to attach and stays on reliably. Fits 19 mm cabinet door / drawer. Doesn't need support. Extra vertical shell perimeters…
Print approx. €6.97–€8.52 excl. taxPreliminary estimate for PETGSource material: PET
This model is a wall mount for the inside of any standard Ikea kitchen cabinet that is designed to hold two of any standard type of SodaStream CO2 cylinders. By using the wall mount the usually unhandy and clunky SodaStream CO2 cylinders…
Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET
Der Haken ist für Küchenfronten bis 16,5mm stärke. Zum oberen Schrank/Schublade müssen mindestens 3,5mm Platz zwischen den Fronten sein. The thickness of your kitchen front has to be max. 16,5mm or aprox 0,65 inches and need a clearence…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Handle for Kitchen Cabinet The holes in the handle have a diameter of 3 mm and a depth of 15 mm. The distance between the holes is 63 mm. --- Griff für Küchen-Oberschrank Die Löcher im Griff haben ein Durchmesser von 3 mm und eine Tiefe…
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
This is a generic spices organizer. The holes have a diameter of 43.25mm (measured a “Ostmann” chili spice at 42.5mm. There are 15 holes so you can add a variety of spices. I also included a STEP file so you can adjust the model for your…
Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant
ReMixed Andrew Burkhart's KitchenAid Mixer Attachment Holder which was a remix of tacoh's Shelf Bracket. Resized for 1 inch wire spacing on the wire rack, made the bases a bit thicker and added a backstop to the top piece. Printed in PLA…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This low-profile under-cabinet mount for the kitchen perfectly positions your iPad for using cooking apps or streaming movies and music while cooking, while also swinging up and out of sight when not in use. It could also be useful in a…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Single kitchen utensil rest. Material: PLA, PET-G, ABS etc, Layer high: 0,2 or lower Supports needed
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Knob suitable for at least some Franke kitchen fans and ventilation hoods. Outer diameter 35.5mm. For mounting on an 6mm axle with a 1.5mm cutout. I made it in PETG for strength, but it will probably work with PLA as well. Both 0.1 and…
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
🇲🇽🪅 Let your child embody the ultimate Mexican food experience! 🪅🇲🇽 I designed a 20-piece toy set to play “taquería” (taco shop) in a truly authentic way! As a Mexican designer of all things whimsical, this is a love letter to the most…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
This is a replacement part for the inner part of a remote control of the Blanco Elon kitchen sink. You can find this part and the corresponding parts with the item number 119 293 for about 18€ or you can just print this part. I created…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
If you have lost your front cover, this is now the opportunity to simply print a new one. Wenn sie ihren Frontdeckel verloren haben, ist das jetzt die Möglichkeit sich einfach einen neuen zu drucken. Printed in PLA - 100% Infill
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
I created a few kitchen appliances toys model, this is the first part. You can find the raw .stl and the sliced .3mf that helps multicolor prints with color change. If you like it, please buy me a coffee by pressing the “Support designer”…
Print approx. €8.75–€10.69 excl. taxPreliminary estimate for one variant
Magnetic lid tailored specifically for KitchenAid mixers (4,3 l bowl). This unique accessory not only ensures a snug fit to prevent spills but also comes with a convenient filling slot, allowing you to add ingredients seamlessly while…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by w00h's 5-compartment organizer for smaller packets . Print in spiral vase mode *, with at least 1mm of solid bottom layers. For external perimeters, I suggest an extrusion width of 1.2mm. * Since I only modeled the external…
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for one variant
I was tired of freezing bags scattered around in the kitchen drawer. So I made my own organizer with 4 insets. 2L, 4L, 6L and 8L The model is 200x187x51
Print approx. €13.06–€15.96 excl. taxPreliminary estimate for one variant
This kitchen paper roll holder has been designed for large rolls that I personally use in my garage. Rolls with a diameter of 30cm should easily fit! The frame includes two holes for mounting to wall with standard screws. For a full setup…
Print approx. €5.38–€6.57 excl. taxPreliminary estimate for one variant
This is a sponge holder for ceramic/stone kitchen sink with 25 mm wide edge. No supports needed for printing.
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
Dies ist ein Abluftgitter für Geräte in der Küche (Kühlschrank, Dampfabzug) für ein Loch der Grösse 45 cm x 6.5 cm. Es müssen zwei Teile gedruckt werden und zusammengeleimt (starker Zweikomponentenkleber oder Heissleim). Fusion360 Datei…
Print approx. €8.29–€10.13 excl. taxPreliminary estimate for one variant
I have desigend a few magnets to attach in the kitchen. Gladly you can use the create file to print. If that does not fit you and your magnets I have attached the .step file. Then you can create yourself the right size. If you use other…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
This is an easy to print storage stand for the KitchenAid Gourmet Pasta Press pasta discs and cleaning tool. (Model KSMPEXTA) I designed two versions, for 5 or 6 discs (if you decide to store one with the pasta press). Printing…
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Use glue to connect the parts in a single row. I used 5x5 mm and 20x6x2 mm magnets to connect the first row and the subsequent rows. You don’t have to use magnets. Use glue instead of magnets. The parts are designed so that you can adjust…
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
My daughter's toy kitchen is a 2nd hand "Holzkunst Scheune Kinderküche ‘All-in-one’ with a missing sink. As I do not have an original part, I made up a custom sink in FreeCAD myself. The result is a little too big for printing as single…
Print approx. €14.62–€17.87 excl. taxPreliminary estimate for one variant
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a simple set of corner pieces for stylish extension arms for a lalmp above any workbench, desk, countertop,… The corner pieces are connected with aluminium 15x15 square tubing and a cable way is included in the diagonal piece.…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for PETGSource material: PET
Tired of not having paper towel easily accessible when cleaning up after your baby? Me too, so I made this. Super easy to print, no supports needed. I used a 40% tri-hexagon infill and 3 walls and it's plenty strong enough. The version in…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for one variant
The foot end is designed to fit under an Ikea Bekväm kitchen cart and there are associated spacer of the same elevation to screw between the caster wheels and the foot. I am using this kitchen cart for garden grilling activities. The main…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
triska 0,4 tisk PLA/PETG vynucené podpěry (kostka)
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
This is a simple device for hanging your hand immersion blender, either corded or uncorded inside your kitchen cabinet. It is composed of two parts so that the hanger part can be easily remove and replaced. In this case, it fits the…
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
Zo kan je handdoeken ophangen aan de kast deuren. Misschien moet je de dikte wat aanpassen voor over jouw deuren te hangen. Het binnen werk is wel in een flexibel materiaal geprint. This way you can hang towels on the cupboard doors. You…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
I turned an old dresser into a knife drawer, but it was too heavy and bulky and kept breaking, so I decided to make this instead. I made it out of PETG for a little better temperature tolerance though I don't think it's a problem. I got…
Print approx. €6.47–€7.91 excl. taxPreliminary estimate for PETGSource material: PET
Ik heb ook de ophanging bewerkt. Ik had er al 1 gemaakt (https://www.printables.com/model/575502-handdoek-droger-voor-keukenkast-en-badkamer-towel-) maar nu heb ik hem dieper gemaakt dat de handdoek beter blijft zitten. I also worked on…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
The only support needed is for the center cup. This is my first time uploading a design. Any and all suggestions appreciated.
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
I was tired of the towels always being thrown onto the shelf, so I designed a hook on which you can easily hang the towels. The hooks can be attached to the handles very easily and without damaging them. If necessary, these can also be…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Kitchen Stove Knob model is based on @Weedjesus_350271 CAD file and modified for W10844787. I printed it in PLA in Prusament Galaxy Gray
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Funnel for kitchen robot Sencor. Printed with PLA, for cleaning will be better PETG.
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Needed a scoop for salt when we was canning that was in between sizes. So here is a 3/4 tsp measuring spoon.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Have fun and please share your comments and models. Happy printing...
Print approx. €3.69–€4.50 excl. taxPreliminary estimate for one variant
Couldn´t replace just the old stopper because of huge hole in cabinet wall, thus I added extra screws and support structure for the holder. Printed with PLA Prusament and 0.2mm layer height.
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Korb für die Küchenwand mit Rinne. In meiner Küche gibt es eine Art "Rinne", in die man Halter und kleine Regale einhängen kann. Dieser Korb ist zur Ablage oder zum Laden von Telefonen geeignet. In einer Ecke befindet sich die…
Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant
We have a Soehnle Page Compact 300 kitchen scale aka Küchenwage. It's somewhere in our cupboard, leaning against other things. It's inconvenient getting it out and putting it back again. And because I'm new to 3D printing and have little…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
EN : Utensil for play kitchen Material : PLA Layers : 0.3mm Supports : nine Brim : yesEN: Utensil for play kitchen Material: PLA Layers: 0.3mm Supports: nine Rafts: yes PS: The upright position is for aesthetic reasons and requires a…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Korb 2 für die Küchenwand mit Rinne. In meiner Küche gibt es eine Art "Rinne", in die man Halter und kleine Regale einhängen kann. Dieser Korb 2 ist zur Ablage oder zum Laden von Telefonen geeignet. In einer Ecke befindet sich die…
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
Once you have all of those kids pots and pans and utensils, here's some toy noodles to print for your kids toy kitchens. Choke size safe even. To print these, just load the .3mf file into prusa slicer and hit slice. I have tops and…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This is a modification of the Insert - Bottom (No Holders) , made to fit CNCKitchen deburrer . This is just a customized insert to the following model Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style by @Lndnny. Print settings…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Have fun and enjoy, and please share your comments and models... Happy printing...
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Handy adaptor to load the senseo cup on the Kitchen Aid coffee grinder when using a reusable coffee pod. Printed in PETG for the flexibility with a light fuzzy skin to improve texture perception. Click on the standard cup holder delivered…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
I was not happy with the bright LED lights in the RV kitchen, so I created a new light cover that diffuses the light from the bright LEDs inside the light bulb. I used clear PLA and vase mode. I tried it with and without fuzzy skin and…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Description The former IKEA Corner base cabinet pull-out fittings from the series Rationell tend to sag under the weight of the pots. In my case, the front corner hung more than 7 cm lower than the center bearing, and the pots slid toward…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
.STL needs to be scaled up 10x, I will re-upload the correct one, .bgcode is made for 0.25mm nozzle 0.05mm layer height and PLA so there is a good detail in font.
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
This Kitchen Press is a simple and versatile 3D-printed tool designed for pressing burgers, dough, and other food items. The minimal design consists of a solid round base and a matching press handle, allowing you to apply even pressure…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for PETGSource material: PET
A friend's kitchen hood had a sagging handle strip, and it was because the plastic mount melted a bit from the heat, so I recreated it as a simplified version that fit perfectly.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Razor blades, and children are a bad... Now i am using this to prevent fingers in the baldes. Easy to remove when you need it..
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Kitchen shelf made from LÄMPLIG (IKEA) pot holder to create more space in the kitchen. This is a holder measuring 50x28cm ( https://www.ikea.com/cz/en/p/laemplig-trivet-stainless-steel-30111087/ ). Please note that the print is shorter…
Print approx. €8.88–€10.86 excl. taxPreliminary estimate for one variant
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
A practical kitchen tool designed to squeeze excess water from a sponge without touching it , keeping it drier and more hygienic
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Most of the packets for my kitchen/baking needs come in standard sizes. So I quickly drew up a model to store them in my cabinet. (The compartments are 65 mm x 20 mm each in clearance and 60 mm deep. If your packets differ, you can simply…
Counter Bin - Improved Design for Effortless Kitchen Clean-Up Model Overview: Introducing the Counter Bin , a refined and enhanced version of existing kitchen counter cleaning solutions. This model combines the best features of two…
A holder for your IKEA 365 lids. May suit others. It is designed to be fed from the side as well to fit shelves and not only drawers. Due to large surface area, you should be careful printing on glass without adheseive or brim. Printed in…
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Tidy up your kitchen drawers with this compact organizer for baking sachets like vanilla sugar , baking powder , and other small pouches. 🧱 The insert features 8 compartments : • 5 standard-depth slots • 3 deeper slots for storing more…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
Just a hanger for kitchenaid mixer attachments. You'll need #6 countersunk screws to install them. (I only had #8 screws on hand so the screw heads are sitting a bit proud in the photo) Edit: added the step file for anyone who wants to…
Discover our practical kitchen roll holder in modern Ripple design - a stylish accessory for any kitchen. Available in two sizes: • Standard size: Perfect for regular kitchen rolls. • Compact version (210 mm): Ideal for printers with a…
Papiertuchhalter für Unterbaumontage Material: PETG Infill: Gyroid 30% Zum einfachen Anziehen der Schrauben verwenden Sie am besten einen Winkelschrauber Vorsatz auf dem Akkuschrauber. Wie zum Bsp. den Wolfcraft #4688000 Wenn dir mein…
Upgrade your kitchen organization with this modern utensil holder! Designed with elegance and practicality in mind, this holder features three spacious compartments to store your spoons, forks, knives, or other kitchen tools. The ribbed…
I really love that this design fits perfectly to my MK3, i hope you will enjoy it too Printformation Material: PLA and PETG (Screw, used it because of the color), its fine if you only use PLA Infill: Anything you want Layer heigth: 0.2mm
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
It's that time of year that my girls do their cookie weekend. They make dozens of different cookies. I saw several ads for funnels. I thought I would design/make them one. They have Kitchen Aid K45SS and a Professional 5 Plus mixers. FDM…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
Simply print this tray and use double sided tape to attach it to the bottom of a kitchen shelf.
A simple model to hang your kitchen scale in your cabinet and out of the way. Can be hanged with screws or double sided tape. SCALE TO FIT YOUR NEEDS: If you want other measurements, simply scale the model in the slicer using the…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
Nice looking paper towel holder.
edit: this File now exists on cnc kitchen's site: https://www.printables.com/model/342075-extrusion-test-structure CNC_Kitchen_Extrusion_Test_part_with_Volumetric_Flow_Rates CNC_Kitchen is not me! only wanted the file an it didn't exist…
Modern designed kitchen utensil basket. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full…
I made a toy kitchen knife, taking inspiration from the shape of IKEA's Vardagen. https://www.ikea.com/gb/en/p/vardagen-cooks-knife-dark-grey-40294722/ Print settings: Filament: PLA Nozzle: 0.6mm Layer height: 0.3mm Supports: no Assembly:…
These are mounts for a kitchen scale
A modern and practical spoon holder , designed to make your cooking experience easier and cleaner . With its sleek and minimal design, this spoon rest helps you keep your kitchen organized by providing a dedicated place to set down your…
Bag Clips for Kitchen, printed with PETG
The Modern Minimalist Kitchen Utensil Holder is the ideal addition to any contemporary kitchen. Featuring a sleek cylindrical shape with a ribbed texture , it provides both functionality and aesthetics . This holder offers ample space to…
This is the test hook I've been using in many videos to test the strength of various 3D printed materials. My usual print settings can be found here: https://www.patreon.com/posts/filament-test-16238656
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
The Modern Minimalist Kitchen Utensil Holder Ribbed High is the ultimate combination of form and function . With its increased height , this holder offers extra space for storing long-handled kitchen tools like ladles, spatulas, whisks,…
Kitchen paper roll holder Sharing my paper roll holder model. Seperated parts make for easy replacement of the paper rolls. The thing consists of two parts on each side: The “base” that can be mounted to the wall (or wherever) The…
Description A modern ribbed container for kitchen utensils, cutlery and other things. The standard dimensions are 170mm x 130mm. It can be scaled at will. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and…
This is a collection of remixes or add-ons for the awesome “Kitchen Sink Organizer” from @Ruiaxe. Our sink is a bit bigger so it couldn't fit the organizer. Decided to remix the original model and created a few additions that might come…
