Ersatzteil Drehknauf ARENDO Eierkocher
Dieser Drehknauf ist passend für die ARENDO Eierkochermodelle. Es scheint ein Problem bei den original Knöpfen zu geben. Sie brechen nach einiger Zeit ab.
- Downloads
- 21
- Likes
- 5
- Rating
- 0
131 models
Dieser Drehknauf ist passend für die ARENDO Eierkochermodelle. Es scheint ein Problem bei den original Knöpfen zu geben. Sie brechen nach einiger Zeit ab.
Box ist gedruckt in PETG, PLA ist zwecks Thermischer Beständigkeit nicht zu empfehlen. Deckel ist gedruckt in TPU 52D, weicheres TPU ist nicht zu empfehlen. ------------------------- Box is printed in PETG, PLA is not recommended due to…
Printing instructions Layers: 0,2 mm Infill: 15% Material: PLA Support: No
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
Stabile Kochlöffelablage bei der man die Abtropfschale herausnehmen oder ausdauschen kann
G36 speedloader created from several 3D models- combining expierience into a speedloader who can load 10 bullets who are on factory rail and inserting induvidual bullets (5 in short version or 10 in long version). Simple model to make…
Aliens (1986) James Cameron The Heckler & Koch VP70 is the service pistol of the Marines in the movie. This gun is notably seen in the hands of Private Frost (Ricco Ross) just before the Aliens attack. Cpl. Ferro (Colette Hiller) attempts…
This is a simple strainer for a ricecooker. I designed it, so you can wash the rice directly in the bowl and strain it perfectly, without having trouble of rice falling out, or not getting all the water out. My pot has a diameter of 14cm.…
Anthony Kochevar is in my eyes one of the best designers at Thingiverse, at least within the ones who creates models for model railways. If you are interested in northern American railway themes, I strongly recommend to visit his site:…
Please feel free to remix the design and print for selling it, please upload remixes. G36 speedloader for easy and quick magazine loading, first couple mags are loaded in same speed as with loading using fingers, diffrence is felt when…
Jack-O' Valentine is a major character in the Guilty Gear series. She is one of the three servants of That Man, alongside Raven and I-No. Her past is shrouded in mystery, and her own memories are vague. Because her awakening remains…
Summary I've owned a Spoon rest like this before. But I broke it. In online trading you only get things made of silicone or with only three openings. So I build them myself. The dimensions are: Length: 130mm Width: 100mm Height: 50mm…
Tako-Chu's name comes from the Japanese words tako (タコ ? ), meaning octopus, and chu (ちゅ ? ), onomatopoeia for a kissing sound, referencing the shape of their mouths. Print upright! May need some support directly underneath the body. Can…
WAIT! Before printing, just know that there is now a new updated version available https://www.printables.com/model/1179980-mp5-and-mp5k-for-dummy-13-beta-v1extra-stock-skele A beta release of a little something that I am working on :)…
Es handelt sich hier um einen Ersatz-Drehknopf für WECK Einkochautomaten inkl. einem Positionsmarker. Der Drehknopf hat etwas Spiel, das Original wird mit einem Stahlblättchen fixiert, darum hier einfach etwas Heißkleber verwenden.…
This is the logo of the company Heckler & Koch in 3D.
Small covers for the commonly used (7/16" EU) threaded propane/butane camping canisters and stoves. Protects the threads from dust and dirt. Print with a small layer height of 0.08mm.
Griff für Kochtopfdeckel, aufgrund der hohen Temperaturen mit einem SLA-Drucker gedruckt Handle for cooking pot lid, printed with a SLA-Printer because of the high temperatures FCStd, STL, STEP
english On our Siemens egg boiler, which is over 20 years old, the egg support has practically disintegrated over time due to heat and lime exposure. I traced the part, which is no longer available as a spare part. In several development…
This Kocher clamp is a clamp that locks in a given position allowing you to hold specific objects such as needles or pipes. For assembly, add a piece of filament into the holes and melt it on both side.
The model is made by extruding and twisting the Koch Snowflake into a Christmas Tree. This is the same fractal construction used in the Fractal candy dish . Vase mode is recommended. Can be lit with a tea light when printed in vase mode…
Nachbildung der originalen Schraubhalterung für die Dometic Kochfelder
Hi, here is another Koch Snowflake Ornament. I've been using this one as a coaster and as 2D wall art. as you can see there are 3 iterations of the fractal. Feel free to leave me some feedback in the comments and please let me see your…
Koch snowflakes can tile the plane. This tree is made from scaling down the outer Koch snowflake while twisting it under it lines up with the largest inner snowflake. Then this process repeats with the nest inner Koch snowflake. Print in…
NOT MY MODEL GO TO (I'm only contributing how to get BOSL2 & Sharing the STL):
A pencil holder based on the Koch snowflake fractal, to be printed in vase mode.
DE: Modellbezeichnung des Gas-Kochfeldes: Thetford Basic Line 345 So konstruiert, dass keine Metallfeder, wie es die Original-Bedienknöpfe haben, benötigt wird. Deshalb gehen die Regler nur schwer auf die Welle, haben dafür einen besseren…
My intention was to create both a lamp and a neon. Since the original logo is red, I will probably use RGB tape, but you can also print the lid in color. I was inspired by the project:…
ist 350mm lang und somit für Ikea Metod passgenau
Mein Einkochautomat wurde geliefert und einer der Drehknöpfe war Kaputt... Dank herbert konnte ich einen neuen Drucken.
I wanted to print a model of a Koch Snowflake but (at the time of creating this) the only model on Printables that claimed to be an OpenSCAD file to generate a Koch snowflake was actually a list of coordinates for a snowflake that was…
this was printed on an ender 3pro. joints need to be glued together or you can do what I did and melt them together with a soldering iron. the bottom section has holes to get your power wires through. print settings pla .28 layer height…
Replacement Piston Piece for HK MP5 AEG Competition cocking lever by Umarex (Elite Force). This part replaces the broken injection molded piece shown in the pictures. Note: you can also break the charging handle itself despite it being…
This is a fractal vase created by making a loft between 3 Koch Snowflakes with ascending iteration. I designed this vase with python (cadquery) and added the script for customisation purposes. You can read more about the Koch Snowflake…
Den benutzten Kochlöffel einfach auflegen, die Tropfschale fängt alles auf. Je nach verwendetem Druckmaterial auch Spülmaschinenfest. Simply place the used spoon on top, the drip tray catches everything. Also dishwasher-safe, depending on…
https://www.hi3d.ai/share/realistic-stylized-futuristic-female-hero-3d-model--5217a21e4b5341b297de3ad3d940a1e2?inviteCode=Y8Axoeva9P&shareType=history_model
Created a Heckler & Koch Keychain with fusion 360
Schnell gedrucktes Modell mit Löchern für 10*2mm Magnete. 20 x 12,5 cm groß Zwei Farben Druck. Mit Magnethalterung für einen Flaschenöffner. Rückseite mit Magnethalterungen für den Kühlschrank Support einschalten für die Magnetlöcher auf…
I wanted to create a 3D-printed Koch Snowflake for Christmas but couldn't find a model that fit my needs. Therefore, I created this simple python script to generate Koch Snowflakes for me. This tool can generate nice Koch Snowflakes using…
0,2 mm Layer hight, 0,4 mm Nozzle,
Shinobu Kochos Stinger Nichirin Katana for the Dummy 13 Model Scaled to a standard D13 Model (100%). Prints in 2 Parts, no supports required. Glue is optional. All my Dummy 13 models can be found here . All my Dummy 13 BLEACH models can…
Eine einfache Schale, um Kochlöffel oder Kellen während des Kochens zu platzieren.
Gedruckt wurde aus NonOilen Filament. (Lebensmittelecht und Spülmaschinenfest)
Serduszko z napisem ,, ! I love ! ‘’ na okrągłej Podpórce.
Bottle holder up to 85mm diameter. I created this holder for Koch-Chemie bottles. The model is printable without support
As the wind gently blows, snowflakes dance in a strange and mesmerising motif. Like our life’s journey, the curve moves ever onwards into a wondrous future. An endless puzzle combining an eye-catching tessellation with a space-filling…
Es gibt zwar schon einige dieser Ablagen, aber ich habe nie die Richtige gefunden. Ich habe sie in drei verschiedenen Versionen entworfen: V1 : Grundfläche ca.: 100 x 140 mm, recheckig, für kleinere Arbeitsflächen V2 : Grundfläche ca.:…
Laufgewicht für eine Heckler & Koch USP EXPERT. Könnte sein, dass die Konstruktion auch an andere USP Modelle (Standard, Custom Sport, Tactical, Elite, P8) passt. Probieren, jedoch keine Garantie. Das Innenleben besteht in diesem Fall aus…
The source marked this model as adult content.
Print Settings Printer brand: Anycubic Printer: Vyper Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament brand: any Filament color: any Filament material: PLA Post-Printing Platte auf Basis geklebt
Ein Knauf für ein Deckel für einen Kochtopf der universal überall passt. Er wird mit einer Spax Schaube verschraubt
There are two Parts, the Holder and the inlay. Print the holder with tree support. The inlay doesnt need support: The inlay can snap in into the holder. Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: Yes Resolution: 0.2…
🔧 Beschreibung Dieser praktische Deckelhalter bringt Ordnung in deine Küche und verhindert das lästige Stapeln oder Umkippen von Kochtopfdeckeln. Das Design ist platzsparend, stabil und für verschiedene Deckelgrößen geeignet – von kleinen…
Koch snowflakes can tile the plane. This tree is made from scaling down the outer Koch snowflake while twisting it under it lines up with the largest inner snowflake. In this model the twists are counter to each other. Then this process…
A Koch snowflake is a geometric shape that is created by starting with a triangle and then adding smaller triangles to the sides in a repeating pattern. The resulting shape is a complex, self-similar curve that has an infinite perimeter…
Warstwa według uznania, ja drukowałem na 0.2. Najlepiej drukować z TPU, ale PLA też daje radę, najwyżej będzie lekko sztywne.
Damit man während des kochen sein Besteck oder einen Rührer ablegen kann habe ich diese Ablage konstruiert.
A simple vase/tea light (LED only!) or hollow form based on a Koch Snowflake with 3 iterations. Instructions I use these as tea lights with Flicker LEDs from Evil Mad Scientist. See http://www.thingiverse.com/thing:34791 . To play about…
Decorative tealight candelabra with Koch snowflake fractal as a base. Included are three different sizes, mini for one candle, midi for three and maxi for seven. The largest variant fits into a 200x200x200 print envelope. The banding seen…
Dies ist ein Knopf der für Pfannen oder Kochtöpfe benutzt wird . Auftrag Arbeitskollege Gedruckt in PETG Layer 01 Speed 60 3 Konturen
My attempt at a Koch curve entirely in OpenSCAD. The wall thickness is determined by T. This needs to be small for higher number of iterations. The maximum viable number of iterations is 6. Print instructions Category: Math Art Summary My…
A unique gift for a loved one. Magic heart/inscription "KOCHAM CIE" (I LOVE YOU in Polish).
This cookie cutter is based on the fact that two different Koch snowflakes can tile the plane. This idea was suggested by @Daridam as an alternate use for the Koch Snowflake fidget . You need to print 5 (or 6 depending on your slicer)…
What is a Koch Snoflake? See Wikipedia . This vase has the same profile throughout it's entire length, the profile gets larger and twists with height. Recommended printing settings: Not vase mode (I didn't test it, but you can try) 2…
Deutsch: Ich habe mein bestehendes Design ( Kochlöffelablage von reddragon835 | Kostenloses STL-Modell herunterladen | Printables.com ) abgeändert, sodass die Abtropfschale und der Halter zweigeteilt sind. Die Schale braucht so weniger…
Hi, here is a container/ desk organzier made out of a revolved Koch snowflake I made earlier ). Feel free to leave me somefeedback int the comments and please let me see your prints.…
I wanted to illustrate multiple iterations of the Koch Snowflake fractal in one 3D shape. Each level transitions to the next iteration. The bowl is designed to be printed in vase mode. This uses a similar fractal construction to my…
Eine Box zur Unterbringung von Suppenwürfel und Saucen/Gulaschwürfel, recht stabil in 2 Versionen. 1 x mit Deckel und einmal ohne Deckel mit anderen Rand oben. Mein Tipp: an den Ecken unterhalb Filzgleiter anbringen. Ist gedruckt mit PLA…
Einfachen Löffel halter. Ein helfer für die Küche. In PETG mit 0,15 und 0,4er
Made a holder for my mum's new silicone brushes... print without supports but a brim is advised to stop the clamp tips from lifting. to mount on the wall I used 2 pcs. M3,5x30 countersunk screw. Print Settings Rafts: No Supports: No…
After many years of using my trusted PETRA waterkettle, its lid started to crumble. It It literally disintegrated in the hot 100°C steam and little plastic pieces got mixed into the water. The original lid was probably made out of ABS,…
I designed this model in CAD while exploring the Koch curve fractal and its relationship to cubes, specifically a quadratic Koch snowflake at level two. The structure is recursive, using cubes as the base form, and I cut the model along…
I thought this might be a way to visualize successive iterations of the Koch snowflake stretched over space. This model pushed this limits of what OpenSCAD can do. I used python to create STL directly for most of it. Obviously, bridging…
An experiment in 3D fractals: take a Koch snowflake , revolve it around an axis to make a solid, then intersect or union several of those solids at different angles. The result is a jagged, self-similar geometry that looks very different…
Dieser Stand besteht aus zwei Haltern die überkreuz zusammen gesteckt werden können. Eine Gaskartusche mit einem Durchmesser von 9cm kann darin sicher stehen. Ein aufgesteckter Kocher oder eine Lampe stehen dann sicherer und kippen nicht…
A Von Koch Snowflake is a triangle based fractal. Starting with an regular triangle, the center of each side becomes the center for a triangle that is 1/3 of the side length. Then this is repeated for each of the sides of the resulting…
Schnell gedrucktes Modell mit Löchern für 10*2mm Magnete. 20 x 12,5 cm groß Zwei Farben Druck. Mit Magnethalterung für einen Flaschenöffner. Rückseite mit Magnethalterungen für den Kühlschrank Support einschalten für die Magnetlöcher auf…
I like fractals! This year I prepared this Koch snowflake inspired Christmas tree bauble so everyone can enjoy Very Merry Fractal Christmas. Print both parts. I printed in PLA (Recycling Fabrik - Zarter Pfirsich), no special settings are…
Dies ist ein ReMake eines einfachen Siebes für einen Reiskocher Pott. Mit seinen kleinen Hacken rechts und links, sowie der Halterung hinten, rastet er schön am Topf ein und hält von alleine. FaKe90 hatte das Original so konstruiert, das…
Halter für Kochtopf Deckel , zum anschrauben an die Schranktüre direkt.für Schrauben 4mm .
Ein einfacher Griff (65mm) für einen Kochtopfdeckel mit Gewinde an der Unterseite. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 mm Infill: 50% Filament: N/A PETG, ABS, ASA Egal Category: Kitchen & Dining
Gedruckt mit Polymaker High Temperatur PLA
Schneidenschutz für die scharfen Kochmesser in der Küche. Für unsere 17,5 und 13 cm Kochmesser mit 3mm Messerrücken PLA; 0,15mm;
Emblem of the Dutch amplifier manufacturer I printed one in PLA black with silver. Paused the print where the text started (filament change). After that, inserted the silver color filament. Layer height: 0,2 mm Speed: 50 mm/sec…
For anyone wishing to add more Christmas cheer and fractals to their life I have the perfect solution! Print yourself a cute fractal Christmas tree with an awesome fractal topper. Printing instruction for the tree File:…
Put your dirty spoon inside and it won't make the table dirty :)
Keychain for a Chefkoch If you like to, check out my other designs too!
I've been on a bit of a hiatus, but I do still occasionally sculpt. This time, it was Hakumei, from the anime "Hakumei and Mikochi". It is an obscure series, but it's beautifully animated and super wholesome and more people need to know…
Schnell gedrucktes Modell mit Löchern für 10*2mm Magnete. 20 x 12,5 cm groß Zwei Farben Druck. Mit Magnethalterung für einen Flaschenöffner. Rückseite mit Magnethalterungen für den Kühlschrank Support einschalten für die Magnetlöcher auf…
It is a Japanese paper style lamp. Made in parts to assembled.
Uns ist die grüne Arretierung des Schnellkochtopfes abgebrochen. Ich habe es mit PETG gedruckt und bisher noch keiner hohen Hitze ausgesetzt. Theoretisch sollte der Griff aber nicht so heiß werden und das PETG sollte die Temperaturen…
EN This is a replacement cover for the lamps of a "KPM EB-DKF-2” double hotplate. The model includes the cover, a nut for fixing and a sealing ring. The sealing ring should be printed from flexible material and is pushed onto the cover…
Good organization means less cleaning ;-) The holder is designed to be used with a porcelain cup with a bottom diameter of 60mm and a upper diameter of 87mm. It will work with different diameters but the cup isn't secured as well! To fit…
Praktischer Küchenhaken für Lappen, Kochhandschuhe oder kleine Küchenutensilien. Der Haken lässt sich flexibel anschrauben oder ankleben – ideal für die Montage unter Hängeschränken, neben der Spüle oder an anderen passenden Stellen in…