Search results: kukirin

Sort order

77 models

P
Printableslorenzo pisoni

Kukirin Fender

The Kukirin G2 is a well-built electric scooter, but for some reason, it only comes with a low-quality rear fender. To protect the shock absorber and myself from water, I made two fenders: one for the front, secured with two screws, and…

Downloads
942
Likes
48
Rating
5
P
PrintablesTom

KuKirin G2 Master suspension wrench

There is a small torx screw in the adjusting nut that needs to be removed first. In my case the screw was hiding in the back of the nut so I had to use a bit of force to loosen the nut so the screw would show up. I printed it with 4…

Downloads
758
Likes
48
Rating
0
P
PrintablesFabio

kukirin logo

printing time 30min cost 6,90g

Downloads
444
Likes
17
Rating
5
P
PrintablesLucky

Kukirin Porte clef

Porte clé Kukirin en relief pour les trottinette de la gamme.

Downloads
422
Likes
17
Rating
5
P
PrintablesKotlin

kukirin G2 Pro fender support (also stronger version and STEP inside)

Fender support part for Kukirin G2 Pro. Printed it with Bambu Lab PETG-CF. Slicer settings: 0.2mm layers; 4 perimeters; infill 40% gyroid; laying down on the broadest side; supports needed.

Downloads
278
Likes
5
Rating
0
P
Printablesops0c

KuKirin G2 Ultra keychain

KuKirin scooter keychain

Downloads
253
Likes
9
Rating
1

crash pad kukirin g2max

wypełnienie 100%

Downloads
241
Likes
22
Rating
5
P
PrintablesDawid Paszko

Kukirin g2 mudguard / rear fender extender (clip on)

Kukirin g2 mud guard / rear fender extender Clips in - no glue or zip ties needed. It clips in on the sides (bottom part). Printing recommendations: At least 15% infill, PETG/ASA/ABS but PLA will work too. Supports needed. I printed it…

Downloads
238
Likes
23
Rating
0
P
PrintablesMartin Ďurinda

KuKirin wheelie bar

link to mini kukirin g4 https://makerworld.com/en/models/2284410-mini-kukirin-g4?from=search#profileId-2491494

Downloads
237
Likes
7
Rating
0
P
Printablesops0c

KuKirin G4/G2 keychain

Settings for 0.4mm nozzle: First layer height: 0.14mm Layer height: 0.1mm Layer width: 0.36mm Nozzle temp (for PLA): 200C Nozzle temp (for PETG): 235C Bed temp: 65C Recommended using 0.4mm nozzle or smaller. This keychain doesn't have the…

Downloads
215
Likes
5
Rating
0
P
PrintablesSeryi García

Guardabarro Kukirin g2 master

Guardabarro Kukirin g2 master deportivo

Downloads
178
Likes
10
Rating
0
P
PrintablesDawid Paszko

Kukirin g2 front fender / mud guard (clip on)

Kukirin g2 front fender / mud guard Clip on - 5 seconds installation. As a bonus, here is my silly design process:

Downloads
174
Likes
9
Rating
0
P
Printablesżuraw

Charging port plug- Kukirin G2 pro

A plug for the charging hole, making it difficult for water to get inside. Gasket. For scooter Kukirin G2 Pro (but there is big chance to fit it to other typs of scooter). Versions: -charger_plug_v3 - with small cut at one of side. With…

Downloads
143
Likes
15
Rating
0
P
Printablesplayer2

kukirin g2 pro screw cover

Screw cover for the Kugoo Kirin G2 Pro

Downloads
127
Likes
16
Rating
0
P
Printablesmagx2

Kukirin G2 MAX Fender with Maori Art – Enhanced Protection & Style!

Tired of mud and water splashing everywhere on your Kukirin G2 MAX? Upgrade to this custom-designed fender for ultimate protection and a unique aesthetic. Unlike the default fender, this one is engineered to shield against the elements…

Downloads
121
Likes
8
Rating
0
P
Printables1lluv4r4r

M21 nut cover UFO Kukirin G3 pro

min 40% infill supports required TPU material

Downloads
117
Likes
9
Rating
5
P
Printableslucas Rogers

Kukirin G2 Rear Fender

Print with 20-40% infill Use supports (Regular or Tree) Use zip ties to secure fender to the Kukirin G2 Escooter

Downloads
114
Likes
13
Rating
0
P
PrintablesJerry93

Kukirin G4 Front Fender

I am currently testing this version. Print at your own risk! (normal size) Short version: Already tested and working. Not compatible with version 2026 After 80 kilometers my front fender broke (normal size fender - PLA material) . I hit a…

Downloads
109
Likes
11
Rating
5
P
PrintablesTaable

Kukirin G4 shock absorber hole plug

If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover. Printed with PETG…

Downloads
106
Likes
8
Rating
0
P
Printableswinqooq

Caps on nut (bolt) KuKirin G4

18, 19 and 21 mm size external size 30mm

Downloads
103
Likes
14
Rating
5
P
Printableswinqooq

Kukirin G4\G2 Shock Absorber Cap

3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG

Downloads
102
Likes
8
Rating
0
P
PrintablesTaable

Kukirin G4 stand support

The stand on the Kukirin G4 has no support and in the unsupported position it can slightly flop up and down and when you drive on a bumpy road the rear part of the stand always hits the lower part of the scooter's body. (and that makes…

Downloads
97
Likes
11
Rating
5
P
PrintablesVlachla Nemecek

KuKirin G2 Max Wild Man bag holder

CZ: Držák bagu WildMan pro koloběžku KuKirin G2 Max. Vytisknout 2x EN: WildMan bag holder for KuKirin G2 Max scooter. Print 2x

Downloads
89
Likes
9
Rating
0
P
PrintablesJerry93

Kukirin G4 Side Stand Shoe

I was fed up with the fact that when I tried to put my G4 on a stand on a softer surface, it would fall to the ground. So I modeled this. For assembly you need: 3x - M3x12 screw Allen head 3x - M3 nut Adhesive material, such as silicone,…

Downloads
88
Likes
10
Rating
0
P
PrintablesSeryi García

Llavero Kukirin

Llavero de Kukirin

Downloads
80
Likes
3
Rating
0
P
Printableswinqooq

KuKirin G4 Footrest pad

I printed it on PETG plastic, but you can print it on TPU or flex if you need flexibility. Stick it on with double-sided tape or glue compatible with your plastic.I printed it on PETG plastic, but you can print it on TPU or flex if you…

Downloads
79
Likes
6
Rating
0
P
PrintablesGergő Kiss

KuKirin G2 Master chain lock mount

A mount for holding your chain lock. ABS or ASA material is recommended for outdoor use.

Downloads
76
Likes
9
Rating
5
P
PrintablesJerry93

Kukirin G4 Rear Fender

Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…

Downloads
76
Likes
5
Rating
0
P
PrintablesLuisa

Kukirin G2 extra headlights

Extra 2 headlights for Kukirin G2 electric scooter

Downloads
59
Likes
9
Rating
0
P
PrintablesEJ

Kryptonite Evolution Mini-7 Lock Mount for KuKirin G2 Pro

This is a custom-designed mount to securely attach a Kryptonite Evolution Mini-7 U-lock to the frame of a KuKirin G2 Pro e-scooter. The basic idea is from here:…

Downloads
59
Likes
10
Rating
0
P
PrintablesTheRealMario

KUKIRIN G2 MOD foldable deck hook

No rattling noises and easy to fold. Printable in 3 hrs in PLA with: 0.20 layer height. 5 layer wall loop. 20% infill in honeycomb 3D (30% infill for FOLDING BRACKET) EXTRA STUFF NEEDED x4 M4 x 8mm nuts and bolts (to fix collar to stem).…

Downloads
49
Likes
7
Rating
0
P
Printablesolegadble

KuKirin G2 Pro hole plugs

I don't use a seat with my KuKirin G2 pro, and the 4 mounting holes remain uncovered. I designed simple plugs for them - you should print 2 threaded and 2 without thread. IMPORTANT! Be careful when screwing in the threaded plugs - they…

Downloads
49
Likes
6
Rating
0
P
PrintablesJirkaM_12

KUKIRIN Keychains Dragon & K

KUKIRIN Keychains Dragon & K

Downloads
48
Likes
6
Rating
0
P
PrintablesJerry93

Kukirin G4 Bottle Holder

I purchased the bottle holder and bottle at Decathlon.…

Downloads
44
Likes
3
Rating
0
P
PrintablesSeryi García

Fender Kukirin G2 Pro

Fender para kukirin g2 pro

Downloads
43
Likes
2
Rating
0
P
Printableslucas Rogers

Kukirin G2 Front Fender

Use supports 20-40% infill Zip ties are needed to secure the fender to the scooter

Downloads
42
Likes
7
Rating
0

Kukirin G3 Electric Scooter Charging Port Cap

If your rubber one broke off, (like mine) you can use this one it is tested and fits tightly. (But not too tight)

Downloads
39
Likes
3
Rating
0
P
PrintablesANDREI

peg for kukirin g2 master

this is a peg that goes on the nut and make the scooter look better

Downloads
39
Likes
5
Rating
0
P
Printableswinqooq

KuKirin G4 rear light spacer (rev1-4)

you will need you will need: 2 bolts M5x10 or M5x12 2 nito nuts M5

Downloads
39
Likes
2
Rating
0
P
Printableswinqooq

KuKirin G4 anti-rain for key

Before printing, measure your key. In the picture below is a long 35mm (model MON1SP)

Downloads
34
Likes
5
Rating
0
P
Printableswinqooq

Steering shaft boot KuKirin G4

Steering bearing protection to reduce water, dust and sand ingress P.S.:Before printing, measure your gap.

Downloads
34
Likes
5
Rating
0
P
PrintablesElelfo3d

Guardabarros delantero y trasero Kukirin G2 pro

Son unos guardabarros ponibles con clips en los guardabarros del kukirin g2 pro (patinete eléctrico) Preferiblemente petg con recubrimiento uv para no daño por exposición al sol. Miden 0.5mm de espesor ideal para poder doblarlos a mano…

Downloads
33
Likes
3
Rating
0
P
PrintablesMr4th

Kukirin M5 Pro mudguard mount

ABS+ 5 perimeters M6 bolts and nuts M3 bolts and nuts locktight

Downloads
30
Likes
2
Rating
0
P
PrintablesNihil Novi

Kukirin G2 Pro taillight holder

It hooks in on one side and snaps into place on the other; I recommend printing it on its side, with supports, to prevent the hook from breaking, PETG works well

Downloads
28
Likes
1
Rating
0

Kukirin S1 Pro Power Button Replacement

This is a replacement power button for the Kukirin S1 Pro electric scooter. The original rubber button on these scooters often breaks or falls out, making it difficult or impossible to turn the scooter on or off. This model has been…

Downloads
27
Likes
4
Rating
0
P
Printableswinqooq

KuKirin G4 turn moto-signal holder

It is necessary to extend the line from the rear LED-light 16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left

Downloads
26
Likes
3
Rating
0

Kukirin G3 Electric Scooter Charger Transformer Stand

When charging your electric scooter the transformer of your charging cable can easily overheat, so I made these risers to keep the transformer from overheating in the way it keeps it uninsulated. How it does it is by not using the surface…

Downloads
24
Likes
0
Rating
0
P
Printableslucas Rogers

Kukirin G2 Light Bar Mount

Use 20-40% infill for good strength Use 1/4" by 2" bolts to secure the bracket and bar to scooter

Downloads
24
Likes
3
Rating
0
P
Printableswinqooq

KuKirin G4 moto-signal back holder

16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left

Downloads
23
Likes
5
Rating
0
P
Printablespz

Kukirin G2 lock holder

Easy to print any material no supports

Downloads
23
Likes
2
Rating
0
P
Printableswinqooq

KuKirin G4 turn moto-signal holder and 12v sockets

It is necessary to extend the line from the rear LED-light 16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left I used this 12v socket

Downloads
22
Likes
1
Rating
0
P
PrintablesSica

Kukirin power button protection

When drivinig with my todler she accidentally kept pressing the power button on the Kukirin G2 Max e-scooter. So i designed this button protection against unwilling presses. The cover stays in position by a spring and it is very easily…

Downloads
21
Likes
3
Rating
0
P
PrintablesAnatoliik

Crash pad na nakrętki 21mm, hulajnoga kukirin, M21 nut cover

Crash pad na nakrętki 21mm, hulajnoga kukirin Różna wysokość Nut 21mm

Downloads
20
Likes
5
Rating
0
P
PrintablesCh'ti Maker

Porte Clée Kukirin

Porte Clée Kukirin noir et orange

Downloads
20
Likes
4
Rating
0
P
PrintablesTheOneFoxxy

Kukirin G4 Light holder

a printable light holder for the stem support blocks on the kukirin g4, made for led light bar. Printed in PETG with 4 walls and 40% infill, i recommend PETG,ASA,ABS or PC or other sturdy materials that hold up well to uv as it will be…

Downloads
19
Likes
1
Rating
0
P
PrintablesPhonkmaker

Throttle extender for Kukirin

extends your throttle from half twist to full twist print with strong infill and at least like 2 walls

Downloads
18
Likes
0
Rating
0
P
PrintablesPhonkmaker

Stand for Kukirin

stand for kukirin or other e-scooter. Print in strong material i used PETG-CF at 40% gyroid infill. It is a very long print if u use a 0.2 mm layer height for the quality and print it at like 30-40mms so it will take like 90-100 hours.

Downloads
18
Likes
1
Rating
0
P
Printableslucas Rogers

Kukirin G2 Rear Splashguard

Use 25-40% infill Secure splashguard with screws into the frame

Downloads
17
Likes
4
Rating
0
P
Printableswinqooq

KuKirin G4 Corner moto-signal back holder

16 pin block: Black – GND (General contact) Yellow – + Turn right Green – + Turn left

Downloads
13
Likes
2
Rating
0
P
Printableswinqooq

Wing repair holder KuKirin G4

first of all you need to cut off the existing hex protection and what was torn off and also increase the hole to 10mm

Downloads
12
Likes
0
Rating
0
P
Printablesburgerport_pl

kukirin s1 max screen peak

PRINT infil: 100% material: PETG time: 2h HOW TO INSTALL bend like on the picture push down click

Downloads
11
Likes
1
Rating
0
P
Printableszoltán áddám

Kukirin g2 Szélterelő

Fő Jellemzők: Optimalizált dizájn: Pontosan illeszkedik a gyári Kukirin G2/G2 Pro hátsó sárvédő ívéhez [1.1]. Funkcionális és esztétikus: Diszkréten illeszkedik a roller megjelenéséhez, valóban jelentős funkcionális előnyt nyújt. Tartós…

Downloads
10
Likes
5
Rating
0
P
Printableswinqooq

Repair plastic for stock KuKirin G4 foot

add some solidol/lithol inside so that it does not jam the spring P.S: I recommend drilling to 6 mm and using M6x25 screws and accordingly nuts

Downloads
8
Likes
1
Rating
0
P
PrintablesGFS

Keychain with logo. Electric scooter: Dualtron, Gotrax, Hiboy, Hiley, iscooter, Kukirin, mi, Nami, Ninebot, Niu, Razor, Sagway.

Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…

Downloads
8
Likes
0
Rating
0

KuKirin M5 Pro charging port cover

Charging port cover for kukirin m5 pro made with PLA 30% infil

Downloads
6
Likes
1
Rating
0
P
PrintablesPhonkmaker

Kukirin key holder

holds a ignition key that you can mount on an handle bar. I had one laying around but if you are planing on putting it on a handlebar purshase one that already has the mount like this:…

Downloads
3
Likes
0
Rating
0
P
PrintablesEJ

Kukirin Turn Indicator

Description: This is a self-designed turn signal for the Kukirin G2 Pro scooter. In principle, it works on any scooter that has 12V indicators – or on any scooter where you have 12V and can add a handlebar switch and a suitable flasher…

Downloads
2
Likes
0
Rating
0
P
PrintablesPhonkmaker

Kukirin g2 spoiler v2

Updated version for the kukirin g2. It has a bigger wing and it is sturdier. I used extra zip ties to keep it on better.

Downloads
1
Likes
0
Rating
0
P
Printables

Repair plastic for stock KuKirin G4 foot

add some solidol/lithol inside so that it does not jam the spring P.S: I recommend drilling to 6 mm and using M6x25 screws and accordingly nuts

P
Printables

Kukirin G4 Bottle Holder

I purchased the bottle holder and bottle at Decathlon.…

P
Printables

KuKirin wheelie bar

link to mini kukirin g4 https://makerworld.com/en/models/2284410-mini-kukirin-g4?from=search#profileId-2491494

P
Printables

Llavero Kukirin

Llavero de Kukirin

P
Printables

KuKirin G4/G2 keychain

Settings for 0.4mm nozzle: First layer height: 0.14mm Layer height: 0.1mm Layer width: 0.36mm Nozzle temp (for PLA): 200C Nozzle temp (for PETG): 235C Bed temp: 65C Recommended using 0.4mm nozzle or smaller. This keychain doesn't have the…

P
Printables

Kukirin M5 Pro mudguard mount

ABS+ 5 perimeters M6 bolts and nuts M3 bolts and nuts locktight

P
Printables

Guardabarro Kukirin g2 master

Guardabarro Kukirin g2 master deportivo

P
Printables

Kukirin G4 Rear Fender

Already tested and working 200+ kilometers - Upper part with reflector (PLA material) If this fender lasts 200 kilometers without any damage, then I will update this description to already tested and working. ;-) You can choose from two…