Cable routing and desk cover / Schreibtisch Kabelführung mit Abdeckung
Easy to print Print instructions Rafts: Not needed Supports: Not needed
- Downloads
- 595
- Likes
- 123
- Rating
- 4.4
1,637 models
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Verwendete Nozzle N0.4 Schichthöhe 0.2mm Material PLA Infill 20% Ich druckte dieses Modell mit Stützstruckturen für die Skistockkuhle. Bei der Montage schmolz ich die Säulen auf die Halterung und füllte die Kuhle mit Heißkleber um mehr…
Shark fin cover for the roof antenna of your W639. Print using PETG, ABS or similar heat resitant material. Two verisons are supplied. 1. The regular one with thick walls ment for translucent filament and a recess to hold the Sika Flex…
Blinddeckel für Jung Rahmen… Der Deckel wird einfach in den Rahmen geklebt…..
3D wall art "Bee in honeycomb" in multicolor printing. Parts can be printed all separately and glued together, or printed completely multicolor (bee and background separately). The bee is stylized as a lowpoly design and raised with…
After I have downloaded and printed the nice cable cover from John @John_Smith (Thanks a lot). I saw the terrible cable salad behind the display. Immediately I made a Cover for this. Printed with PLA galaxy black, I love it.
Just print the case and the caps for the unused ports. This prevents that the ports get dusty. Prints without support.
Es ist störend, wenn Fliegen, Bienen oder andere Insketen in mein Glas krabbeln. Drum gibt es diese Abdeckung, die auf verschiedene Gläser passt. Ich empfehle PETG zu nutzen, da dies Lebensmittelecht ist. Translation DeepL It is annoying…
Object Description: Ersatz für Kunststoffschiene-Halterung 538.002.45.01 von MEPLA. Diese wurde in Häcker-Küchen und von anderen Küchenherstellern in Schubladen verbaut. Die Schienen sind nur noch selten gegen gutes Geld oder vielleicht…
I build a switch cover with a switch lock to prevent accidental switching. To do this, the cover must be mounted or glued in the desired switching position. In other words, if you want the switch to be on all the time, turn the switch on…
Batterieabdeckung für Burg-Wächter Messschieber Schichthöhe 0,1mm
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Um das Sieb des Abflusses in der begehbaren Dusche zu säubern, muss die Abdeckschiene herausgehoben werden. Dafür war der Rest einer Rolle perfekt und die Farbe egal :-). Gedruckt mit PLA in 0,2 Quality.
Für die Gourmetmaxx Heißluft-Fritteuse Digital 2,5l gibt es eine Abdeckung über dem Handgriff. Da die originale Abdeckung abgebrochen ist, anbei eine selbst modellierte Abdeckung zum ersetzen. Ich habe PLA und PETG ausprobiert. Bisher…
Beim nächsten mal würde ich den Teil, der hinter Sockelleiste ist unterbrechen. 2-3 Klemmen reichen statt durchgehend.
Das ist eine Batterieabdeckung für eine S50 oder S51. Ich habe das Model mit Fuzzy Skin gedruckt, deshalb die aufgeregte Oberfläche .
A custom hook for the IKEA Kungfors bars.
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Cartoon hair comb in skunk format. No supports necessary. With color print.
Die Abdeckung dient zur Personalisierung und schütz die Aufnahme vor starker Verschmutzung gerade in einem Betrieb mit mehreren Mitarbeitern weis jeder gleich wem welcher Schrauber gehört. über likes Markes und follower würde ich mich…
Kann z.B. in Stallschränken eingebaut werden, damit die Mäuse nicht durch die Lüftungsbohrungen in den Schrank gelangen.
Profilabdeckung für die 2040 Alu-Profile in verschiedenen Ausführungen siehe Bilder. Es gibt 3 Ausführungen einmal 50% , 75% oder 100% geschlossen (Beispiel-Bilder !!) Es können Kabel damit verdeckt werden. Oder für sonstige…
Fit is tight but perfect :-) My first drawing with Fusion 360 Sooooo happy about it. I had to work very precisely to meassure the two small nipple on one side and the hole for the screw on the other side. Did fit with first try. Well,…
Eine Radnabenabdeckung für Felgen mit 56 mm Lochkreis mit dem geflügelten Skoda Pfeil. Die Druckvorlage wurde aus zwei Körpern erstellt, damit eine entsprechende Farbzuordnung für Mehrfarbendrucker erfolgen kann. A wheel hub cap for rims…
Diese RFID-Sensor-Abdeckung wurde speziell für unser RFID-Modul entwickelt und ist ideal für Smart-Home, IoT- und DIY-Projekte. Das präzise, passgenaue 3D-Design schützt das RFID-Sensormodul zuverlässig vor mechanischen Belastungen, Staub…
Eine Radnabenabdeckung für Felgen des BMW i3. Die Sonnenblume ist natürlich auch das Logo der Partei Bündnis 90 / Die Grünen. Die Druckvorlage wurde aus mehreren Körpern erstellt, damit eine entsprechende Farbzuordnung für…
These earrings feature the classic diamond-shaped emblem of Hung Gar kung fu , created by the Lam family lineage. Within the diamond, the stylized forms of the Tiger and Crane can be seen — symbols of strength, balance, and harmony at the…
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
zum zusammendrücken der Kunstaugen, anpassbar die verschiedenen Grössen bei jeweiligen Drucken to squeeze the artificial eyes together, the different sizes can be adjusted for the respective prints
Drücken Eure Kinder oder AirBnB-Gäste gerne auch auf allen Knöpfen? Diese Abdeckung verhindert dies, einfach aufstecken und Ruhe ist.
Ersatzabdeckung für den Öltank einer Motorhispania 50ccm.
Mittelabdeckung für die Schraube der Duschbrause mit Ø14,20. Gedruckt im Vasenmodus mit 0,16 Layerhöhe.
An einem Heizkörper war die Abdeckung einer Bohrung gebrochen. Dadurch konnte man auf den Hahnblock schauen, was nicht sehr schön aussah. Die Öffnung wird durch diese Abdeckung verschlossen. Die Bohrung in der Seitenverkleidung des…
Diesen Staubschutzdeckel habe ich mit PLA gedruckt. Das Modell muss für den Prusa Core ONE in zwei Teile geschnitten werden und anschliessend geklebt werden. Die Klebeflächen sind aber genügend gross, damit die Teile zuverlässig verklebt…
Ersatzteil für die Abdeckungen des Handgriffs des Wäschekorbs "Country" von Rotho/Sundis. Gedruckt mit einem Prusa i3 MK3S+ mit einer 0.4mm Düse. Druckmaterial PLA. Für die kleinen “Nasen” wird eine Stützstruktur benötigt.…
Mit dieser Abdeckung können die Elektrischen Kontakte des Grundmoduls von Husqvarna FLXi-System, vor Staub und Schmutz geschützt werden.
This model is designed to be easy to print—no supports needed and fully compatible with standard PLA. I printed it on a Creality CR-10 300 using a 0.4 mm nozzle. Print settings were as follows: Nozzle temperature: 220 °C Bed temperature:…
Das ursprungliche Modell war gut, aber mir hat genervt, daß die Lichtleiste ständich leuchtet. Außerdem ich wollte, daß die Abdeckung feste am Bildschirm haltete. Das alles habe ich in diese Model angebracht. Druckeinstellungen: PLA/PETG…
The pack was meant for decorative purposes. All parts are interchangeable, insert core and glue it. Original upload date: 2023 Dec. 14 Updated Jan. 11, Core pieces.
------------------------------------- NEW AND UPDATED VERSION HERE: > Version 2 < ---------------------------------------- Kunai fidget spinner toy. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale…
Kunai fidget spinner toy V2. Fixed for better printing. Ball bearing made with 14 airsoft 6mm BBs. Free spinning with pretty low friction. Scale by 0.4% (100.4) for PLA or whatever the shrinkage of your material is. Best printed with PETG…
Modified from WF3Ds to fit the one from the game a bit more and to make painting a tad bit easier. Recommended printing vertically with supports (tree supports work wonders on this). NOTE: some printers can handle the overhang with no…
I remixed Damascus2A's MLOK Handstop V1 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Damascus_2a:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1mm Infill: 99% Walls: 10+…
Found this model on thingiverse and did not found it here so to promote or attribute this artist here is the link to the original file https://www.thingiverse.com/thing:4871206
I remixed the Wushu grip from Maverick0197 to have the Die Free Kung Fu Grip texture. https://odysee.com/@Maverick0197:1/WushuGrip:6 https://diefree.com/kung-fu-grip/ Below are my recommended print settings: Resolution: 0.1-0.2mm Infill:…
Finger fits in hole and is able to spin around. Has "Watermark" to show it was made by me. Print Settings Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2mm Infill: 15% Notes: Tree or normal supports, doesn't matter. Category:…
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
This model can be printed in 1 part or 2 parts. 2 parts uses much less plastic because of no supports but it is a hassle to glue together. Enjoy! Cover Photo by @Roiku
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
Original Part : https://www.thingiverse.com/thing:4894625/files
Here is Kiriko Kunai from overwatch 2. I have split the knife into 2 parts and added 2 2mm holes for alignment. For stuff like this I like to use 2 pieces of filament. Im not sure the true scale of her kunai, but they normally range from…
This is an original design of a oyster mushroom character. Modeled in blender and printed with Prusa Mini. Printed with white PLA and wood filament as the base. You can choose to print it whole or print it in separate parts. All model…
Print two times this half with two connectors and than glue them together :-)
Shuriken and Kunai Hey maker! 👋 A simple and highly printable ninja set. Features: Easy to print design. Print two copies and stick them together for full effect. Great for display or cosplay props. Printing Tips: Print flat for best…
Kunaï Naruto anime style (full size 320mm) + 3 mm diameter pins (Please note attention that some pins have to be cutted to fit properly) Printed with ABS so this can be glued and smoothed with aceton. Shelf has been added for a good…
For the massive weebs out there. This is a high quality, 1:1 accurate version of the Spy's Conniver's Kunai from Team fortress 2. Designed as a prop replica (not a weapon), that you can simply print and put together. full size : 34.6cm x…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
En Naruto, el Kunai se usa casi exclusivamente para el combate. Pudiendo servir como arma arrojadiza, arma cuerpo a cuerpo e incluso para fabricar o formar parte de trampas ninja. Debido a su aerodinámica forma, este arma siempre golpeará…
Enjoy my design of the Kunai used in the anime Naruto! I've looked through numerous sites for a Kunai file that looked accurate to the anime and was comfortable in the hand. Granted, any designs in cartoons/anime will vary from episode to…
I printed in PETG with a 20% infill, triangle pattern. Bottom is optional, but print with 0 bottom layers, 10% hexagon infill. May experiment with 2 part silicone as a bottom.
For best results, print in a temp resistant material. Print at 100% infill for max strength. Supply your own MLOK nuts/bolts. I used these: https://www.amazon.com/gp/product/B0CXJDDKR3
Model fixed to store normal size Joints and prevent the premature damage. 🥶 You can also download my other models. 👇👇👇👇 https://www.printables.com/es/model/490432-joint-holder https://www.printables.com/es/model/534140-ufo-joint-holder
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
This model is one single body, and is only possible to print in multiple colors with platform's like Bambu Lab's AMS or Prusa's MMU. A multi-part version will be released soon (ON THIS PAGE) for printers that don't have this capability.
English Description of the 3D-Printed Desk Cable Pass-through: Purpose and Hole Diameter: The cable pass-through is designed to route cables neatly through an 80 mm hole diameter in desks, shelves, or work surfaces. Modular Design: The…
Mortal Kombat X's (2015) version of Scorpion's spear/kunai.
Update 01.01.2022: ich hab das Design nochmal etwas angepasst und verbessert. Update 01.01.2021: I adjusted and improved the design a bit.…
My Step-Dad worked in the Lockheed Skunkworks when they were developing the F-117 - though he swears he didn't work on it. (wink wink) Anyway, I made this for him as a Christmas gift - and printed it 'transparent' because it was…
Der Opel Rocks-E und der Citroen Ami haben das Problem, dass es im Winter recht zugig ist. Der Fahrtwind sammelt sich in der Türgriffmulde und zieht durch das Schloss in die Tür. An der Lasche zum Schließen der Tür ist eine Öffnung. Dort…
Hallo Es sind Abdeckungen für meine Fenster. Mit Zeit werden die gelber und sehen einfach hässlich aus. Also abgebacht und nachgezeichnet. Richtige zu kaufen ist auch nicht immer so einfach. Besonders wenn man einen 3D Drucker besitzt…
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
IF YOU ARE CONFUSED BY ALL MODELS READ THE END OF THE DESCRIPTION FOR ALL COMBINATIONS FOR PRINTING !!! Some other models in Naruto Collection : Kunai Shuriken Flying Raijin Kunai Dimensions (total): Length : 30.00 cm Width : 9.80 cm…
DE: Eine Radnabenabdeckung für viele Felgen mit einem Durchmesser von 60mm. Bilder folgen bald! ________________________________________________________________________________________________________________ EN: A hub cap cover for many…
Hier kannst du dir eine Abdeckung für deine Mutter drucken. Ausgelegt ist die Abdeckung für SW17. Du kannst diese Abdeckung jedoch problemlos auf jede beliebige Größe skalieren. Viel Freude mit dieser Abdeckung ich bin sehr zufrieden.
Spring cover for the brewing group of Siemens EQ 6, 7 and 8 coffee maker Federabdeckung für die Brühgruppe der Siemens EQ 6, 7 und 8 Kaffeemaschinen Print with support / ;it Stützmaerial drucken
noch eine AHK Abdeckung - Schädel mit Hörnern gedruckt in ASA oder ABS 0,2 mit min 4 Wänden und 35% Infill
ENG: I made these parts a while ago. there are versions for 4mm and 5mm thick glass. I own a lot of small fish tanks that came without cover. my printers (FLSUN Q5 and Anycubic 2 Pro) were able to print the parts without support and…
I wanted a classy cover for the trailer hitch. I should not only protect the hitch, after some bruises I decided, my shins need protection too. The Cover has a wide edge with only 10% infill, so it is hopefully a crumple zone. The Cover…
Are you brave enough to consume the king of curses? 😈👹 Calling all Jujutsu Kaisen fans! Bring the ultimate cursed object into the real world with this hyper-realistic replica of Sukuna's finger. From its repulsive fleshy texture to its…
Ich habe den Halter für den neuen OOONO No2 angepasst, weil es diesen so noch nicht gab. Der neue OOONO No2 hat nur 2 kleine Magnete auf der Rückseite, diese empfinde ich als zu klein, um diesen sicher zu befestigen. Den Clip, eigentlich…
Hallo, Mit der Abdeckung soll die RTK Station vor Umwelteinflüssen wie starkem Regen und Hagel geschützt werden. Die Abdeckung hat 3 Haltezapfen und kann damit sauber fixiert werden Der Remix dieser Datei hat eine 5mm tiefer Überlappung…
Better version: https://cults3d.com/en/3d-model/gadget/minato-s-kunai-guliwer06 This is replica of Minato's kunai from anime "Naruto". Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 15% Filament: Colorfil PLA…
For dual color switch filament at layer 18
Die Abdeckkappen für meine Anhängerkupplung gingen alle Nase lang kaputt - das Plastik ist gebrochen. Oder ich habe sie verloren. Also habe ich mir eine aus TPU gedruckt. Damit sitzt die Abdeckung stramm auf der Kupplung. Möchten Sie in…
Feel free to use for your cosplays, to stick it to walls, to toy around with it and so on. It comes in three variations.
Die Steckdose wird in 2 Teile unterteilt das man sich die stütz Struktur sparen kann. Die Zwei Teile werden einfach mit Sekunden Kleber verklebt. Empfohlenes Filament PETG V0. Selbstlöschendes Filament extra für Elektronischen gebrauch
This cartridge case is designed to fit revision 1 of the Kung Fu Flash cartridge for the Commodore 64. For the included "key caps" to fit, use tactile switches with a height of 5 mm. The right most cap shown in the photos was printed…
I really liked V1 of the Wushu grip by @MAverik0197, but I awaus prefered the stipple pattern of the @SCout339 version. So when Maveric was kind enough to release a hollow version of the V1 upon my request ,I decided to make a hollow…
This is model of Kunai - throwable cold weapon depicted in comic series Naruto. There are two models - full, which is actual model of the Kunai, and half, for easier print. print it twice and glue together. There are no special…