Search results: l0

Sort order

180 models

P
Printablesmanolis

Monitor Case For 10'' Netbook Screen (N101L6-L0D)

This is a portable monitor made out of a screen from a broken netbook and a driver board I bought from eBay a few years ago. Print instructions The model of the netbook screen I used was N101L6-L0D and the particular driver board that I…

Downloads
104
Likes
20
Rating
5
P
PrintablesMW

OpenDTU Housing with 1,3 Zoll OLED, ESP32 NodeMCU and NRF24L01+

A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+

Downloads
101
Likes
6
Rating
0
P
PrintablesTim

Case openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+

Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…

Downloads
66
Likes
8
Rating
0
P
PrintablesPeter Farell

L0-LA59 or Lola

Remix of lo-La59 or Lola droid. Mandalorian Lola Droid (Homebrew) by stevem37 - Thingiverse

Downloads
64
Likes
11
Rating
0
P
PrintablesJones

Sól: OpenDTU (ESP32 / NRF24L01+) case

I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…

Downloads
1,351
Likes
70
Rating
5
P
PrintablesOxmstr

VL53L0X

Top lid can be secured by M3 × 6 mm screws. The module itself holds onto the prongs and is pushed down by the lid, can also use soldering iron to spread the plastic around and secure the board. For soldered wires only, no connectors.

Downloads
742
Likes
19
Rating
5
P
Printablesw3rN42

Mesh covers for Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners

These are two mesh covers to replace the original side panels of the Iceriver KS0 Pro, KS0 Ultra, AL0 and RX0 miners. The original side panels are completely closed and the cooling relies on the two small intake fans at the bottom of the…

Downloads
631
Likes
21
Rating
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003

Wall mount for Makita DCL286/CL003. STL file is already set for best orientation. Use a tiny bit of support for the first few layers. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Downloads
461
Likes
15
Rating
5
P
Printablesfoorschtbar

Case for openDTU Ahoy Breakout Board (ESP32 and NRF24L01)

A case for openDTU Breakout Board (PCB) with a ESP32 (38 Pin) and a NRF24L01+PA+LNA radio module. The Gerber files for the openDTU Breakout Board you could find on my GitHub page . Print instructions Parts 1x openDTU Breakout Board 1x…

Downloads
457
Likes
22
Rating
5
P
Printablesandruala

ESP32 nrf24l01+pa+lna bluetooth jammer BLE

I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…

Downloads
426
Likes
38
Rating
3
P
Printablesdjos_1475

KFL08 compatible housing for 608 bearing

Remix to make the bearing captive and improve tolerances - the original version did not account for 3D printing tolerances. Category: 3D Printer Parts

Downloads
407
Likes
27
Rating
5
P
PrintablesMuhahahihilan

Makita CL003G Vacuum Wall Mount

The distance between the screw holes is 80 mm. Screws should be 3,5 - 4 mm in width. FreeCAD file is included for customization. According to comments it fits some 18 V models like the XLC11 as well. Print info Filament: Generic PLA…

Downloads
400
Likes
51
Rating
5
P
Printablesw3rN42

Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miner spacer for better cooling

This is a 180mm x 200mm x 35mm spacer that fits the Iceriver Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners. By lifting up the miner the two intake fans at the bottom improve airflow and the whole metal case has improved heat…

Downloads
327
Likes
12
Rating
5
P
Printablesw3rN42

Air duct for 120mm fan on Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners

This air duct for the Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 miners is designed for mounting an external 120mm fan to lower operating temperatures in devices that are significantly overclocked. To install, the side panel is…

Downloads
302
Likes
15
Rating
0
P
PrintablesEHY_3dp

Mikrotik L009/RB5009 10-inch rackmount

Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.

Downloads
285
Likes
28
Rating
4.8
P
PrintablesAhmed Mohiuddin

nRF24L01 Mockup

This is a mockup of the nRF24L01 Radio Module.

Downloads
251
Likes
8
Rating
0
P
PrintablesPeluMan

Base termo Lumilagro T0376-L09U

SPA Base para termo marca Lumilagro modelo T0376-L09U Dimensiones: Øinterior 82 mm. Øexterior 87 mm. Altura: 23 mm. ENG Base for thermal bottle "Lumilagro" model: T0376-L09U Dimensions: internalØ 82 mm. externalØ 87 mm. Height: 23 mm.…

Downloads
246
Likes
6
Rating
0
P
PrintablesDeeDee

Universal Gl0ck frame holder for laser engraving

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm V-Profil holder 90°degrees: https://www.printables.com/model/1224577-universal-glock-frame-holder-with-90deg-degrees V-Profil holder 22°degrees:…

Downloads
242
Likes
45
Rating
0
P
PrintablesSuperb Tech

RC Remote Controller 8 Channel using ESP32 and NRF24L01

8 channel RC Remote Controller with 2 joysticks, 2 switches, and 4 push buttons Communication via ESP-NOW protocol (compatible with any ESP32 receiver) Extended range mode using NRF24L01 module Built-in rechargeable battery with low…

Downloads
219
Likes
56
Rating
0
P
PrintablesMaster Yoda

NRF24L01 M5Stack Case

This is a NRF24L01 case to use it with the M5Stack Plus 2. I did the case but the unit i bought sadly does not work propertly.

Downloads
192
Likes
36
Rating
5
P
PrintablesKIL0

KIL0 StageTool

Here I share my version of the so called Riggers Multi Tool. None of the ones to buy suited my needed so I created a new one for 3D printing. The multi tool contains the following fittings: M10 butterfly nut M6 butterfly nut 22 mm nut…

Downloads
182
Likes
34
Rating
5
P
PrintablesOskar_diy

ToF enclosure VL53L0X - GAGGIUINO

As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…

Downloads
177
Likes
11
Rating
0
P
PrintablesSimon

Makita 7.2V BL0715 Battery Holder/Tester

I have a Makita TD022D impact driver, which comes with two 7.2V batteries. There is no battery meter on the driver or the batteries (unlike the bigger 18V batteries). I use this to store the spare battery and to test the charge level.…

Downloads
175
Likes
15
Rating
0
P
Printablescarp3-noctem

openDTU / Ahoy with ESP-32S and NRF24L01+ Housing

Pressfit Housing for openDTU / ahoyDTU Datalogger. Made this to the smallest factor that makes sense. Used following Components to build: ESP-32S (used one from this set) NRF24L01+ (used one from this set) 6EA of the smallest Jumper Cable…

Downloads
164
Likes
7
Rating
0
P
PrintablesKaosuNeko

DEKO battery body 20V BT20XL01

DEKO battery body 20V BT20XL01 Please don't print this! This is not a battery case. This is an overall model DEKO battery 20V BT20XL01 created for remixes. Expect the appearance of adapters and storage systems ) Original: BT20XL01…

Downloads
161
Likes
10
Rating
0
P
PrintablesRobbert Laugs

The Star Wars L0-LA59 (Lola)

lola the droid from OBI-Wan Kenobi Series printable in sperate parts for the right coulours. everything clicks togethers, apart from the wings and the hinge the white and red wing part needs to be glued, and the hinge to the wing. if you…

Downloads
156
Likes
54
Rating
5
P
Printablest0b1

Test bracket for VL53L0X module

Test bracket for the VL53L0X ToF IR module from AZ-Delivery. I ordered a bunch of them and needed quite some tolerances for a model that fits them all. This was primarily a test print to verify if I got the dimensions right. OpenSCAD file…

Downloads
148
Likes
4
Rating
0
P
PrintablesCarWalkerMail

Suzuki Swift 2010-2017 78132-68L01 Roof Cover (ZC32S / ZC72S)

Based on OEM 78132-68L01 roof rack cover. You can engrave anything on it in the slicer or just use Your favorite printing plate to give it a finish You want. For short use/cold countries: PETG Recommended: ASA (ABS if painted)

Downloads
142
Likes
12
Rating
5
P
PrintablesMartin_au

Wall mount for Makita DCL286/CL003 - Version 2.

Version two - much better fit and a bit stronger. Print with the angled side downwards and a small layer height. Use 0.2mm layers on a 0.6mm nozzle, or 0.15 on a 0.4mm nozzle.

Downloads
133
Likes
10
Rating
5
P
PrintablesFORMAstudios

Lamp kit for Ikea Strala Cord Set - FORMAstudios L004

L004 Custom enclosure for the Ikea Strala Cord Set. Or comparable E14 Cord Set. IKEA STRALA CORD SET Designed with a focus on minimalism and functionality, this 3D model combines clean aesthetics with practical usability. Perfect for…

Downloads
132
Likes
54
Rating
5
P
PrintablesBubTec

Bungee Goodman Handle for Wurkkos DL07 V3 (Scuba Diving Light)

Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…

Downloads
132
Likes
34
Rating
0
P
Printablesseekerbot

Box / case / housing for Wemos D1 mini and NRF24L01+ (for Ahoy project - Hoymiles solar inverter communication)

Some people got together to hack the communication protocol of a popular micro inverter by hoymiles so that you can see the internal values and send them on via MQTT. You can find the conversation here (in German) and the code here . I…

Downloads
125
Likes
6
Rating
0
P
PrintablesThor Sten

Iceriver case for KS0, AL0 and RXD with 120mm fan & mountable

You can mount the case on a wall or under a desk. Both sides are identical and can put together with the frame. The bracket can slide over the frame and also fits mit snap-in. Alternatively you can print the frame with rails for a voltage…

Downloads
115
Likes
5
Rating
0
P
Printables33K121
18+

The source marked this model as adult content.

Downloads
114
Likes
12
Rating
2
P
PrintablesMrBlue

Hoymiles DTU für D1Mini + NRF24L01+

Ein kleines Gehäuse, passend für D1mini V2 (muss mit Heißkleber fixiert werden) und D1mini V3 (Kann mit 2x2mm Schrauben verschraubt werden). Zusätzlich kann man das NRF24L01+ Modul mit Heißkleber auf dem Block an der Seite fixieren.

Downloads
112
Likes
9
Rating
0
P
PrintablesDorffMeister

Housing for VL53L0X Time-of-Flight (TOF) sensor

Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…

Downloads
111
Likes
5
Rating
0
P
Printableskaiha

Remix of wasyl00 Quest 3 table tennis adapter

Update 12.12.23 - Add model A.1 and B.1, requested by a fellow, which adds 10mm of vertical space but maintains the same thickness as the original version. ---------------- I did this remix for 3 reasons. First, I want more space on the…

Downloads
109
Likes
13
Rating
5
P
PrintablesoXiVanisher

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D

DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles

Downloads
106
Likes
5
Rating
0
P
PrintablesKaosuNeko

DEKO battery BT20XL01 (Makita BL18x0B compatible) wall holder

DEKO battery BT20XL01 20V wall holder Your printer must be calibrated. You will need support. This adapter is compatible with Makita batteries BL1850B, BL1840B, BL1830B and their analogues: DEKO BT20XL01 and 388VF. Original: BT20XL01…

Downloads
106
Likes
16
Rating
0
P
Printablesezxzeng

clip for wasyl00v2.0 table tennis adapter

Made a clip to replace the screw for the wasyl00v2.0 table tennis adapter onshape document link in case the angle is different for your print. Just edit the variables as needed credit for the idea Edit: added a second version with bumps…

Downloads
104
Likes
11
Rating
5
P
PrintablesRackOverflow

High-Strength Parametric Wall Mount for Magicubic L018

A robust, precision-engineered wall mount for the Magicubic L018 projector. This isn't just another bracket; it's a fully parametric model designed for extreme strength (using 5 wall perimeters), a clean "floating" aesthetic, and a 100%…

Downloads
103
Likes
10
Rating
0
P
PrintablesAtrica3D

NRF24L01 Flipper zero case

Following RJ019s method to build this module. Apparently i dont know left from right, so i accitentally built the module with the antenna on the “wrong” side, so to avoid me plugging it in wrong and blowing stuff up, i had to add the side…

Downloads
102
Likes
19
Rating
5
P
PrintablesOFreddy

Housing for TFT and ESP8266 with RF24L01

This is a Model for a specialzed housing for my project on github. https://github.com/OFreddy/wifi-tft-rf24L01 It is printed using Prusament PETG, needs no support with 0.2 mm layer height.

Downloads
100
Likes
12
Rating
0
P
PrintablesDeeDee

Universal Gl0ck frame holder with 90° degrees

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm https://www.printables.com/model/779464-universal-glock-frame-holder-for-laser-engraving V-Profil holder 22°degrees:…

Downloads
98
Likes
23
Rating
0
P
Printablesw3rN42

Air duct for 120mm fan on Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0

This air duct for the Iceriver KS0, KS0 Pro, KS0 Ultra, AL0 and RX0 Miners is designed for mounting an external 120mm fan to lower operating temperatures in devices that are significantly overclocked. To install, just push the air duct…

Downloads
96
Likes
9
Rating
0
P
PrintablesDamian Mróz

GEPRC Cinelog 30 V3 GPS Matek M10Q & 3901-L0X

Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back. Important info about GPS! Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS. Can also hold DJI O4 Pro…

Downloads
96
Likes
9
Rating
0
P
PrintablesDeeDee

Universal Gl0ck frame holder with 22° degrees

Suitable for all generations of Glock frames, AL V-profil 20x20, profile length 200mm https://www.printables.com/model/779464-universal-glock-frame-holder-for-laser-engraving V-Profil holder 90°degrees:…

Downloads
93
Likes
21
Rating
0
P
PrintablesMcGr3g0r

VL53L0X TOF sensor

This is chassis for VL53L0X Time of Flight distance sensor for my INAV 6.1 based F450 type drone to use as range finder. Use M4 nut and screw DIN 912 type (imbus) to connect dist_bdy4_top with dist_bdy3_top. Parts dist_bdy1_bottom,…

Downloads
90
Likes
4
Rating
0
P
PrintablesMaking Changes

Ford F-150 (2009-2014) Upper Dash Mat/Tray 9L34-15044L06-A B

This is a replacement part for the upper dash mat in a Ford F-150 year 2009-2014. Part 9L34-15044L06-A B Seems the original deteriorates in the sun and the OEM part disintegrated during a simple vacuuming. Replacements are available but…

Downloads
79
Likes
24
Rating
0
P
Printablesexplorentinker

TB6612FNG Motor Driver and NRF24L01 Container

This is a combined container for both TB6612FNG and NRF24L01 for a more compact setup for the custom remote control receiver for RC. There are three (3) files in this 1) one with bottom opening for motor driver and normal NRF24L01 version…

Downloads
79
Likes
0
Rating
0
P
Printableszeroxx00

RAVEMEN CL01 go pro mount

I made an adapter to gopro for my bicycle light RAVEMEN.

Downloads
77
Likes
4
Rating
0
P
PrintablesSmeltie

Vl53l0x Separator

The Vl53l0x is what's known as a time of flight sensor. This sensor can measure a distance using a laser! However these sensor are well.. sensitive and can detect a transparent visor pretty easily. As it is usually not possible to place…

Downloads
75
Likes
7
Rating
0
P
Printablescarbo
Downloads
75
Likes
3
Rating
0
P
PrintablesblindMoe

25XL037 10mm bore timing belt pulley

TinkerCad Link: https://www.tinkercad.com/things/9NUnae6U8LJ I created this for use with the Rotary 4th axis for CNC. There are holes that can be tapped for M3 to tighten the timing gear down onto the 10mm shaft / bolt. I drilled a…

Downloads
72
Likes
3
Rating
0
P
PrintablesSalubra

NRF24L01 Flipper Zero case with led hole

Added a hole for led indication

Downloads
71
Likes
12
Rating
0
P
PrintablesPHabermehl

fischertechnik Distance Sensor GY-VL53L0XV2V case

A fischertechnik compatible case for the shown Distance Sensor Breakout GY-VL53L0XV2V Category: Construction Toys

Downloads
70
Likes
2
Rating
0
P
Printablesexplorentinker

NRF24L01 Containers

This is set of NRF24L01 containers that can be used to hold for integration with remote controls. Options: no inserts - can be used with glue support for 2.5mm inner diameter inserts with respective distances between holes as 24mm (width)…

Downloads
68
Likes
6
Rating
0
P
PrintablesYe_Sterday

VL53L0X Magnetic Enclosure for Gaggia Classic / Gaggiuino

If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…

Downloads
68
Likes
13
Rating
0
P
Printablesiddofroom

ESP32 + TOF Sensor (VL53L0X) Box

a small boxs that hold ESP32 with Time Of Flight sensor, with multi state buttons

Downloads
67
Likes
4
Rating
0
P
Printablesbatteria_

Open DTU esp32-S3 NRF24L01+ case

Compact case for an esp32-s3 dev, NRF24L01+ with external antenna, no screw required. ESP and NRF24L01 must not have pin header soldered to fit inside the case, both usb-c ports are available.

Downloads
65
Likes
4
Rating
0
P
Printableswinqooq

Front panel for "IS-IL03-IP5328-v1.2"

IS-IL03-IP5328-v1.2 - A power bank board that can be bought on the Internet and made into a power bank based on it. I only needed the front panel to repair the power bank. P.S.: Micro USB doesn't fit a bit - you'll have to cut it with a…

Downloads
62
Likes
5
Rating
0
P
PrintablesChee Yong

ESP32 C3 Mini OLED with nRF24L01

Simple enclosure for ESP32 C3 Mini OLED and x2 nRF24L01 wireless transceiver module. The hump on the top cover is meant for 10uF 50v or similar size capacitor that are soldered onto the VCC & GND of the nRF24L01 for stable performance.…

Downloads
60
Likes
8
Rating
0
P
Printablesfraggy

Case for Wemos D1 Mini and NRF24L01+

This is a simple housing for an AhoyDTU with unsoldered PINs. The Wemos D1 Mini and NRF24L01+ have to be pushed into the housing with a little pressure, then everything fits very tightly.

Downloads
59
Likes
3
Rating
0
P
PrintablesTony MaHoney

RingBot H4L0

I wanted to try out different types of mechanical joints. My goal was to make it fit around my finger. Of course, you can also use H4L0 without a finger. Perhaps H4L0 will adorn the finger of a chosen one in the near future. Who could say…

Downloads
58
Likes
18
Rating
5
P
PrintablesFelix Fischer

Z Lead screw top support (KFL08 flanged bearing mount) for Ender 3/v2/Pro

While it might not really be necessary on an Ender 3 to fix the z-screws at the top, I got the flanged bearings anyway when purchasing a second lead screw ( Amazon link ), so I wanted to at least put them to use. The bearing must be slid…

Downloads
55
Likes
9
Rating
5
P
PrintablesMilton Osorio

Matek Optical Flow & Lidar Sensor 3901-L0X 3901 PMW3901

Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…

Downloads
55
Likes
2
Rating
0
P
Printablesltmirel

RC 1:16 with Arduino and NRF24L01

had a RC shell from the Nikko RC series and wanted control from Arduino used this model's steering design and mostly scaled the parts from 1:28 to 1:16 (175%) and did the necessary changes for a 1:16 scale model. use M3x10, M3x16 and…

Downloads
54
Likes
10
Rating
0
P
Printablesjoostama

Royal Enfield Himalayan Handlebar Bushing RAL00363

I ripped my bushings in a crash. now got new ones but decided to recreate them to have some spares on the bike when needed. RE part number RAL00363.

Downloads
52
Likes
2
Rating
0
P
PrintablesXpyct

Mikrotik RB5009/L009 45 degree stand

This is simple but usefull stand for Mikrotik RB5009/L009 routers which allows you to place your router anywhere above your height and be able to see all link LEDs and plug/unplug links. Also the plank there has a lot of holes for proper…

Downloads
49
Likes
5
Rating
0
P

L01 Lamp - Compatible with BambuLab light kits

Nifty lamp compatible with two BambuLab kits (you only need one): https://eu.store.bambulab.com/products/led-lamp-kit-001 → Wired, stronger https://eu.store.bambulab.com/products/remote-controlled-16-color-rgbw-puck-lights → Wireless,…

Downloads
49
Likes
11
Rating
0
P
PrintablesM. Tops

Xanes SFL02 Bicycle Light Mount

Xanes SFL02 Bicycle Light Mount https://www.banggood.com/XANES-SFL02-600LM-T6-Smart-Induction-Bicycle-Light-IPX4-USB-Rechargeable-80-Large-Flood-Light-p-1175110.html

Downloads
49
Likes
6
Rating
0
P
Printablesleonek

iNap Malinka, your NRF24L01 transmitter that can play pokemon!

✨ Welcome to the iNap Malinka main page! ✨ iNap Malinka was mostly made as a decent Raspberry Pi based NRF24L01 transmitter. But as it turns out you can play some games on it as well! It's a small DIY handheld that runs RetroPie so any…

Downloads
47
Likes
13
Rating
0
P
PrintablesLUC4R4T0R

Makita DCL286/CL003/XLC11/GLC03Z cordless vacuum wall mount with dedicated extension-tube holder

You want to wall-mount your cordless vacuum and do not use the extension regularily? Look no further and print this design! Print this model with the large angled side (front bottom) facing down. This is a remix of an original design by…

Downloads
46
Likes
4
Rating
0
P
PrintablesControforme

Portable 17" laptop display enclosure (HP DV7 N17306 -L02)

This is an enclosure for a 17" HP Pavillion DV7 (2011) Display. Display part number: N17306 -L02 IMPORTANT NOTE: The display can be rotated max to 30 degrees, after that the cable disconnects. I'm planning to work on a rev2 that supports…

Downloads
43
Likes
19
Rating
0
P
PrintablesEHY_3dp

Mikrotik L009/RB5009 cable guide tunnel

A cable guide tunnel which is compatible with Mikrotik L009/RB5009 with K-79 rackmount in high density environment.

Downloads
42
Likes
6
Rating
0
P
PrintablesRübenprint

Adapter Makita CL001G

Adapter for the click mechanism from the makita CL001G and all models with the same machanism. I think nearly all of them have the same mechanism.

Downloads
42
Likes
5
Rating
0
P
PrintablesHoge

Oil Tank Level Sensor Enclosure (ESP D1 Mini+ VL53L0XV2)

This 3D-printed enclosure is designed for an ESP module ( D1 Mini ) and a VL53L0XV2 time-of-flight sensor for monitoring the oil tank level of a heating system. The model is designed for an oil tank with a BSP G1 1/2 thread but can be…

Downloads
41
Likes
2
Rating
0
P
PrintablesSpar-Fuchs24.de

Uncl0ggbuddy Sicherheitskappe

DEUTSCH: Hallo Füchse, wir hoffen, dass es euch allen gut geht und ihr euren Uncl0ggbuddy in vollen Zügen genießt! Wir haben eine STL-Datei erstellt, mit der ihr eurem Uncl0ggbuddy eine Sicherheitskappe verleihen könnt. Ihr könnt nun eure…

Downloads
39
Likes
4
Rating
0
P
PrintablesDimation

Clips for Nissan roof rails 738524cl0a-05

Clips for Nissan roof rails 738524cl0a-05

Downloads
38
Likes
2
Rating
0
P

Audi Q7 (4L) Rear Door Sun Blind Clip / Hook – OEM 4L0861333

Replacement pull tab (clip/hook) for the rear door manual sunshade on the Audi Q7 (4L) . This model was created to replace the fragile factory part using precise measurements and 3D data. The design is based on a high-resolution 3D scan…

Downloads
38
Likes
3
Rating
5
P
PrintablesJorisFRST

Makita BL0715 battery wall mount

Makita BL0715 battery wall mount

Downloads
38
Likes
3
Rating
0
P
PrintablesMARK

HELL0WEEN PUMPKIN KEYCHAIN (TWO SIDE)

Keychain HELL0WEEN PUMPKIN

Downloads
36
Likes
4
Rating
5
P
PrintableswithanHdammit

QwiicBus I2C Extender endpoint with VL53L0X ToF

This is the case I designed for the QwiicBus I2C Extender endpoint with the VL53L0X Time of Flight (ToF) sensor. This was designed for the side distance sensor for ResinChem Tech's Parking Assist project. I built the original Parking…

Downloads
34
Likes
2
Rating
0
P
PrintablesWestblokker

Mikrotik L009/RB5009 10-inch rackmount with M3

I had M3 on hand so I remixed it to use that. Also made three versions 1. 1 HE, same as the orignal 2. 0.66 HE, to cover 2 squares 3. Tiny, is the same height as RB5009. This version is the on in the picture.

Downloads
34
Likes
5
Rating
5
P
PrintablesKevin Barker

Gridfinity Bins for Makita 7.2v Battery (BL0715)

BL0715 is perhaps the rarest Makita battery since it is only used in a couple screwdrivers (DF012D and TD022DSE) and a flashlight that appears to be only sold in Japan. I designed two bins, one for storing the battery vertically and one…

Downloads
33
Likes
10
Rating
0
P
Printablesmatthijsbos

Corner Mount for TOF200C-VL53L0X Sensor

Bracket for 45-degree mounting of TOF200C-VL53L0X TOF sensor in a corner. Sensor is held in place with a bit of glue. Onshape document:…

Downloads
33
Likes
1
Rating
0
P
PrintablesArpee

Mikrotik RB 5009 / l009 DIN mount bracket

Print it twice for every routerboard - needs M4x10 bolts - no nut needed. Its designed for RB 5009 or l009

Downloads
33
Likes
6
Rating
0
P
Printablesbenhoad

Hooli Gavin Belson Signature Edition Box 3 - Silverstone ML08 faceplate

For more infomation on the creation of it see my blog post. Added SVG for laser cutting logos - the one file has both cut-through and embossed versions of the signature and hooli logo; in my version i opted to has the hooli logo embossed…

Downloads
30
Likes
17
Rating
0
P
Printablestada66

Wall mount for Orico FL01-BK-BP USB hub

A simple two piece wall mount for the Orico FL01-BK-BP USB hub. One side goes over the cable and one over a USB port. Accommodates 4 6mm wide countersunk screws

Downloads
30
Likes
3
Rating
0
P
PrintablesJohn Pang

PL08N Inductive Probe Mount for Hero Me Gen 5

This model allows you to mount a PL08 Inductive Probe, to a Hero Me Gen 5 series Hotend suite.

Downloads
30
Likes
4
Rating
0
P
PrintablesMew

Project l0ckcr4ck3r

Was recently featured on hackaday . More information about the project can be found on my github .

Downloads
29
Likes
8
Rating
0
P
PrintablesTinkerbits

LEGO compatible GY-VL53L0XV2 Time of Flight Adapter

This adapter allows mounting the GY-VL53L0XV2 TOF Laser Distance Module to your own LEGO compatible models. Just snip the "ear" holes of the PCB before you insert the module into the printed adapter. Printing: PLA, 0.4mm nozzle, 2-3…

Downloads
27
Likes
2
Rating
0
P

Makita BL0715 battery replacement plastic cover

Replacement plastic cover for Makita BL0715 battery. The included STL files are pre-oriented for optimal print results. Supports are required for proper printing. I had adhesion issues with the lock_1 and lock_2 parts, so I recommend…

Downloads
26
Likes
5
Rating
0
P
PrintablesServError

IDS AL00037 Camera 1/4 inch adapter

Stand adapter for an IDS UI-3280CP Rev. 2 and possibly others to mount on any 1/4" thread platform.

Downloads
26
Likes
0
Rating
0
P
PrintablesJakub Koreň

Magcubic L018 Projector Lens Cap

A protective push-fit lens cap designed specifically for the Magcubic 650ANSI L018 Projector. It features a push-fit mechanism that grips both the inner and outer walls of the projector's plastic lens bezel. The bottom side includes a…

Downloads
22
Likes
0
Rating
0
P
Printablesruta

Front Rear Wheel Seat, C-Shaped Vehicle Seat RL022 Compatible: Raalro 1:14 Red Buggy/Truggy

it is a small model print 100 percent infill and high res I made this to print in metal through JLC3d because the original ones broke and were fragile

Downloads
21
Likes
5
Rating
0
P
Printablesmrog

Speed-Feed 400 adapters for Greenworks ST80L00 trimmer

I wanted a better head on my Greenworks ST80L00 trimmer. The problem is, the "universal" heads don't fit without some help. I bought a Speed-Feed 400 kit and figured out how to make it work. I printed the adapters using PETG with 100%…

Downloads
21
Likes
1
Rating
0
P
PrintablesEnable 3D

Tray Cup Holder - Hack for IKEA TILLGANG I TL03

3D Model of Tray Cup Holder Compatible with - IKEA TILLGANG (Article Number 104.199.50) Hack for IKEA product to improve user experience Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model…

Downloads
20
Likes
6
Rating
5
P
Printablesmrc3

Replacement saw to dust bag coupling for Makita XSL06 XSL03, and XSL04

Purchased Makita XSL06 saw used and it did not come with a dust bag. So purchased the dust bag, but required a coupler to attach the bag to the saw, which was discontinued. So made this. The long side is tapered slightly and fits into the…

Downloads
20
Likes
0
Rating
0