Search results: laboratory

Sort order

137 models

P
PrintablesMakeroni

cable holder for 20 laboratory and test cables

cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…

Downloads
603
Likes
61
Rating
5
P
PrintablesScientia7

DIY laboratory glove box

I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…

Downloads
473
Likes
238
Rating
0
P
PrintablesDirk

Standart taper joint 29/32 chemical laboratory

This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…

Downloads
35
Likes
4
Rating
0
P
PrintablesGabriel

Laboratory test tube rack

No supports or brim required. It's completely print-in-place.

Downloads
15
Likes
6
Rating
0
P
Printablesvsaggiomo

Ultimate Laboratory Bench Organizer

Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…

Downloads
2,372
Likes
1,217
Rating
5
P
PrintablesWilko_SLO

Laboratory Tongs (Print in Place)

Print Z=0,2 perimeter=5 infill=50

Downloads
2,161
Likes
280
Rating
4

laboratory power supply 48v 6A (XY6020L)

RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…

Downloads
716
Likes
79
Rating
5
P
PrintablesPlants X Tech

COBLE - Collection Of Bespoke Laboratory Equipment

The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…

Downloads
708
Likes
240
Rating
4
P
PrintablesSlanjonok

GAZ 66 - KUNG, Workshop/Laboratory truck (1-160)

Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…

Downloads
402
Likes
42
Rating
0
P
PrintablesPeter H

DISPOSABLE LABORATORY FUNNELS FULLY PARAMETRIC VASE MODE

OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…

Downloads
308
Likes
92
Rating
5

laboratory clamp 90°

This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…

Downloads
300
Likes
74
Rating
5
P
PrintablesAkshay

Open Source Laboratory Rocker / Mixer / Shaker (Lab Rocker)

Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…

Downloads
270
Likes
151
Rating
5
P
Printableseurad

Dremel laboratory centrifuge

This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…

Downloads
249
Likes
161
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand clip 8mm / Laborstativ - Stativklammer 8 mm - 25mm

Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).

Downloads
243
Likes
44
Rating
5
P
PrintablesApe5Hit

Dialysis Clamp (Laboratory)

Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…

Downloads
241
Likes
14
Rating
0
P
PrintablesIsaac

Keychain SCP Secret Laboratory/Llavero SCP Secret Laboratory

Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.

Downloads
217
Likes
41
Rating
5
P
PrintablesZwapz

Adjustable Regulated Laboratory Power Supply SK60 SK120

A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…

Downloads
200
Likes
36
Rating
0
P
PrintablesMatthew B

250 mL Laboratory Flask Holder

250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…

Downloads
181
Likes
57
Rating
0
P
PrintablesJoe

Dexter from Dexter's Laboratory

Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…

Downloads
181
Likes
27
Rating
5
P
PrintablesNovator

RD RK6006 / DPS5020 and compatible DC-DC laboratory power supply case

Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.

Downloads
173
Likes
21
Rating
5

Laboratory sample holder, vacutainer vials holder, blood sample stand

Holder for 13 vacutainer vials, easy print, no support needed

Downloads
166
Likes
47
Rating
0
P
Printablesjakub

The Ultimate Laboratory Organizer!

The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading

Downloads
161
Likes
75
Rating
0
P

Business Cardholder, dental, laboratory, Atlas, Sphere

Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…

Downloads
161
Likes
24
Rating
5
P
PrintablesDroopas

Glass screw cap - laboratory GL18

A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering

Downloads
156
Likes
13
Rating
5
P
PrintablesToFe

Fun science: Universal laboratory stand

Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…

Downloads
153
Likes
60
Rating
0
P
PrintablesRogue_72

Laboratory Magnetic Beads Separation kit

When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…

Downloads
151
Likes
46
Rating
0
P
PrintablesJoe

Dee Dee from Dexter's Laboratory

Dee Dee from Dexter's Laboratory

Downloads
146
Likes
19
Rating
0
P
Printablesjakub

GRIDFINITY laboratory organizer

GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!

Downloads
142
Likes
53
Rating
0
P
PrintablesMasCreations

Laboratory Centrifuge

Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.

Downloads
141
Likes
61
Rating
0
P
PrintablesRealizzaIdee

Laboratory Vial Holders rack: a practical solution

I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…

Downloads
139
Likes
25
Rating
0
P
PrintablesUhrensohn

Holder for laboratory cable

A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!

Downloads
129
Likes
15
Rating
0
P
PrintablesDalama

Laboratory Peristaltic Pump

This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…

Downloads
125
Likes
39
Rating
0
P
PrintablesJoe

Dexter from Dexter's Laboratory

Dexter from Dexter's Laboratory

Downloads
123
Likes
27
Rating
0
P
PrintablesLucian Brandus

DC-DC regulated laboratory power supply and meter

DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.

Downloads
113
Likes
17
Rating
5
P
PrintablesSpater

Multi-tubes rack for 50mL, 15mL and 1.5mL laboratory tubes

Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…

Downloads
111
Likes
18
Rating
0
P
Printablespfuscher666

Breadboard holder with laboratory plugs

Breadboard holder with laboratory plugs Breadboard:…

Downloads
109
Likes
43
Rating
0
P
PrintablesAnton Batrakov

Monument to the laboratory mouse (mouse knits DNA)

The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…

Downloads
105
Likes
8
Rating
0

laboratory clamp parallel

This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…

Downloads
98
Likes
41
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand - Base Plate / Laborstativ - Stativplatte 8 mm

Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…

Downloads
98
Likes
17
Rating
0
P
PrintablesJuráš Ch.

Laboratory tubes dryer

PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm

Downloads
92
Likes
26
Rating
0
P
PrintablesIngenuity

Laboratory Vial Tube Holder

Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…

Downloads
91
Likes
24
Rating
0
P
PrintablesBecker Thorne

HAWKINS NATIONAL LABORATORY SIGN

HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos

Downloads
84
Likes
14
Rating
0
P
Printablesbyrhn

Universal Multi-Size Laboratory Tube Organizer

Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…

Downloads
72
Likes
12
Rating
0
P
Printablesduesentrieb

Laboratory Glassware Crossover NS14 / GL14

Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…

Downloads
72
Likes
5
Rating
0
P
PrintablesDrBenC

Laboratory Vial Organiser Quick Print (13mm, 19mm, 26mm)

A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…

Downloads
70
Likes
22
Rating
0
P
PrintablesHráďa

Laboratory test glass tube

Just a normal chemical laboratory glass tube, but with the screw.

Downloads
69
Likes
5
Rating
5
P
Printables3DTux

laboratory cable holder (rounded, size options)

Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!

Downloads
68
Likes
7
Rating
0
P
PrintablesJDMaker3D

laboratory test tubes

El archivo STL viene en una escala algo pequeña, pero se puede escalar en tu laminador preferido si así deseas.

Downloads
67
Likes
6
Rating
0
P
PrintablesFaceHaver

Long Chemical Laboratory Powder Scoop

I like the original lab scoop , but it was a little short, and I found the print layers lead to powder getting stuck more than is ideal. Made it longer and made two versions, the closed-head one should prevent stuff getting stuck as much…

Downloads
66
Likes
8
Rating
0
P
PrintablesOpen-Laboratory

Laboratory Stand 8 mm - Funnel Holder 80 mm / Laborstativ 8 mm - Trichterhalter 80 mm

Trichterhalter für 8 mm Laborstativ. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthe

Downloads
64
Likes
4
Rating
0
P
Printableszouhar

laboratory/microscope glass box

laboratory/microscope glass box for storing glass with tissue sample

Downloads
61
Likes
15
Rating
0
P
Printableskl4appdrachen

laboratory cable holder

Printed on an FDM printer with 4 wallcounts and 50% infill.

Downloads
61
Likes
6
Rating
0

4 x laboratory clamp parallel

This is a useful laboratory clamp to connect 4 pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version this is a simpel parallel version you…

Downloads
58
Likes
19
Rating
0
P
PrintablesTeddan85

Laboratory Burette Holder with Clamp

An easy to print and assemble to be used directly, be for school project or at home. Takes a small place when in storage. Laboratory Burette Holder, including an clamp for test tubes. One of the must have in the home laboratory, school…

Downloads
57
Likes
12
Rating
0

Ultimate Laboratory Stand

A stand for small objects in your laboratory. I designed it for test tubes, but it can be used for almost anything small and cylindrical. If you have more than one, you can easily link them together for a tidier bench. You will need some…

Downloads
56
Likes
33
Rating
4
P
PrintablesArcher

Laboratory Pegboard Drying Rack - Wall Mounted

This is a lab drying rack with a metal backplate. Aimed to be sleek, made of stainless steel with plastic pegs. Inspired from systems for sale online from lab supply stores that sell for thousands of dollars. Print the pegs with 100%…

Downloads
55
Likes
13
Rating
0
P
PrintablesNikita Kvak

Laboratory test tube stand

Это подставка для пробирок!

Downloads
53
Likes
14
Rating
0
P
PrintablesFuzzyRaptor

Monument to the laboratory animal

In memory to the animals that contributed to science

Downloads
50
Likes
21
Rating
0
P
Printablesschaloule

Screw cap for DIN 55 laboratory bottle

I use those brown 500ml glas lab bottles to store my tea. The original caps are made of black bakelite which breaks quite easily. So I made this cap which also takes the sealing insert of the original cap. I printed from PLA with 2 walls…

Downloads
46
Likes
0
Rating
0
P
PrintablesFolmelord

Open laboratory Tube Rack – test tube stand

This model is an open laboratory stand for test tubes / laboratory tubes. It is designed for clear storage and easy handling of tubes directly on a lab bench, in a classroom, or in a home lab. The construction is a single compact piece…

Downloads
46
Likes
13
Rating
0
P
PrintablesDr.Pavlov

Сontainer for laboratory glasses

Сontainer for laboratory glasses. They use magnets 5Х2.

Downloads
44
Likes
8
Rating
0
P
Printablesimba print

Geekvape Wenax S3 Stand - Magic Laboratory

Geekvape Wenax S3 Stand - Magic Laboratory A Stand for Geekvape Wenax S3 e cigarette. Stylish, handy and exaclty your thing! It holdes your Geekvape Wenax S3 nice, but has some space for tollerances or possible sleeves you may put over…

Downloads
41
Likes
4
Rating
5
P
PrintablesAlex@APTO

Hooks for laboratory cables with space for attachments | Haken für Laborkabel mit Platz für Zubehör

(english below) Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör. Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG…

Downloads
40
Likes
5
Rating
0
P
Printablespatrik

laboratory set with futures

laboratory set with futures

Downloads
40
Likes
7
Rating
0
P
PrintablesKrokodyl

Small laboratory 50mL beaker from polypropylene

Premise Sometimes glass is not the best material in laboratory. Specifically if you work with resins or materials which could destroy the glassware. For this reason polypropylene (PP) equipment can be used. This beaker serves mainly as a…

Downloads
39
Likes
2
Rating
5
P
PrintablesOpen-Laboratory

Laboratory Stand - Clamp 8 mm / Laborstativ - Stativklammer 8mm

Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).

Downloads
39
Likes
6
Rating
4
P
Printablesn.leinad

Incubating Laboratory Bio-Rocker

Laboratory rockers are widely used throughout research in both physics, biology, and chemistry to mix and agitate liquid solutions and suspensions. One area of research that puts extra requirements on the rocker, is biofilm growth…

Downloads
36
Likes
25
Rating
0
P
PrintablesJangy

Robo Dexo 3000 (Robot from Dexter's Laboratory)

Robo Dexo 3000 (Robot from Dexter's Laboratory) Multi colour parts (MMU) Most of the parts are printed with PLA Deep Aluminium by PanTech Category: Sculptures

Downloads
35
Likes
9
Rating
0
P
PrintablesJPN_FI

Portable laboratory power supply (battery & AC) under the $20

Assuming you have old laptop power bricks and/or Ryobi battery to spare. XYS3590 is affordable buck converter up to 36V/5.1A -80W This box housing two laptop power bricks 16V&19.5V = 36.5V/4.5A connected serial. The power bricks' plastic…

Downloads
34
Likes
11
Rating
0

Mobile scanner holder (laboratory)

Manufacturing instructions: Material: PETG 3D Printer: FDM 3D printer, average print time 20h (input shaper enabled on MK4). Slicer settings: 0.2mm layer height, 4 perimeters, no supports, legs are recommended to print in vertical…

Downloads
33
Likes
16
Rating
0
P
Printablescrayzo

Riden/Vislone 3x Laboratory Power Supply Flat & Flexible for Pegboards

I have been looking for a long time for a triple laboratory power supply (meaning: being able to set three different output voltages) that is not deep, but flat, so that it can be mounted on the wall or (as in this case) on a pegboard to…

Downloads
33
Likes
12
Rating
0
P
Printablesnouzamarek

Organizer not only for the laboratory

0,28 mm, 4 wall, 15% infill Bambu P1S

Downloads
33
Likes
8
Rating
0
P
PrintablesJangy

Robo Dexo 3000 (Robot from Dexter's Laboratory)

Robo Dexo 3000 (Robot from Dexter's Laboratory) You will need to enlarge the model for an FDM printer. Support file is for a resin printer with all the supports and hollowed Category: Sculptures

Downloads
32
Likes
7
Rating
0
P
PrintablesRakiet

Drip stand for laboratory vessels

I made all prints with 15% infill. The material tested is pet-g. Optimal printing position: leg, single connector, double connector, middle leg grip. For a more secure mounting on the table, you can use a brim

Downloads
32
Likes
9
Rating
0
P
PrintablesJan Lukeš

DPS5005 laboratory PSU box

I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…

Downloads
30
Likes
13
Rating
0
P
PrintablesAchileusCZE

ATX Bench Power Supply – Adjustable DIY Laboratory PSU

DIY ATX Bench Power Supply enclosure designed to convert a standard PC ATX power supply into a practical and compact laboratory power supply for electronics work. The front panel is designed for multiple output terminals, individual fuse…

Downloads
30
Likes
4
Rating
0
P
PrintablesMJ

Tube Rack (Laboratory Tube Stand)

printed in ABS+ for more strength and stability Dimensions: 110*40*40 good for tubes with 15mm diameter.

Downloads
29
Likes
8
Rating
0
P
PrintablesRogue_72

Field and laboratory tested Biological and Chemical modular sampling, transport and storage kits.

Many sampling strategies during biological or chemical incidents require custom-made solutions, which can become quite expensive when scaling up during epidemics or environmental disasters. As a result, innovative and practical solutions…

Downloads
29
Likes
14
Rating
0
P
PrintablesAndy Williams

Laboratory multisized tube rack

Working in a Biosafety Cabinet, you have very little room. You already have flask, tubes, media, pipettes, pipette tips, and all those racks to hold the tubes! I decided to make a rack that would hold multiple-sized tubes while I worked,…

Downloads
27
Likes
0
Rating
0
P
PrintablesErin Harris

Laboratory cotton swab holder

Laboratory organization rack for sterile cotton swabs and tubes/vials. Fits a package of sterile cotton tipped applicators plus 2-3 tubes/vials. Great for sample collection or surgery prep! Could also fit pens, post its, etc. Can also be…

Downloads
27
Likes
10
Rating
0
P
PrintablesLed Gremlin

The Beat Laboratory Sign

Don't touch my drum set!

Downloads
25
Likes
6
Rating
0
P
PrintablesJake

Laboratory Drawer organizer for low clearance drawers; hold 20-mL scintillation vials, tweezers, gel-pak boxes

I made this drawer organizer insert to fit a drawer in my lab. It has no bottom to allow clearance for 20 mL scintillation vials to sit inside and still let the drawer close as it is a narrow drawer. The model should be parametric in that…

Downloads
24
Likes
9
Rating
5
P
Printablesllanterner

Laboratory probe supports / Soportes sondas laboratorio

Los soportes originales son universales y no encajan bien en todas las sondas. Esto provoca roturas en el soporte y problemas en las mediciones. Por ello hice estos soportes adecuados para los diferentes tipos de sondas que se ven en la…

Downloads
24
Likes
13
Rating
0
P
PrintablesJosh

Laboratory coverslip display box

This model is an easy to print display box for laboratory coverslip. I modeled the two part that hold the coverslip apart from the box so you don't have the staircase effects to hold correctly the coverslips. All the part from the model…

Downloads
24
Likes
3
Rating
0
P
PrintablesMonsieur-Pierre

Severus Snape Potions Laboratory Diorama 3D Model

💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D diorama inspired by Severus Snape working…

Downloads
23
Likes
3
Rating
0
P
PrintablesToFe

Fun science: laboratory scales from force sensor

How to build a laboratory scales from the PASCO or Vernier force sensor :-). BOM: 1x screw M5x45 mm 1x nut M5 1x PASCO force sensor PS-2104 or PS-2189 (or Vernier force sensor DFS-BTA) Print Settings Printer: Molestock Rafts: No Supports:…

Downloads
22
Likes
6
Rating
0
P
PrintablesINVESTEGATE

Oubel Labornetzteil Füße - Laboratory Power Supply long feet

This are long feet for the Laboratory Power Supply of Oubel. Print 2 of them. Find the Laboratory Power Supply of Oubel on Amazon: https://amzn.eu/d/eW0wxDu

Downloads
22
Likes
0
Rating
0
P
PrintablesJana Kudelová

Sampling bowels for the laboratory

Bowls for storing chemical or other laboratory samples. A tray for teaspoons and tweezers is included.

Downloads
22
Likes
5
Rating
3
P
PrintablesEngineer

USB HUB for laboratory power supply

USB HUB Print settings: PETG Nozzle: 0.4mm Layer: 0.2mm Infill: 100% Support: YES Be careful with electronic parts! I'm not responsible for what you do!

Downloads
21
Likes
4
Rating
0
P
PrintablesLibor Baraňák

Laboratory table

It is a laboratory table made of 20x20x1.5 aluminum profiles made of www.aluhobby.cz and connectors printed on a 3D printer. The table is equipped with 2 shelves 1000x500x19 mm. The table is used for mounting a small distillation column…

Downloads
21
Likes
7
Rating
0
P
Printablesomiedude

Dexter's Laboratory Magnet (multi-color)(8x3mm magnets)

Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…

Downloads
20
Likes
4
Rating
0
P
PrintablesLowPolyFigures

Low Poly Laboratory Table

Low Poly Laboratory Table

Downloads
20
Likes
0
Rating
0
P
PrintablesJana Kudelová

Sampling bowels for the laboratory

Bowls for storing chemical or other laboratory samples. A tray for teaspoons and tweezers is included.

Downloads
20
Likes
3
Rating
0
P
Printablesprojektdruk3d

Round Bottom Laboratory Flask

A hollow, one-piece round-bottom flask replica for chemistry displays, classroom demonstrations, cosplay and theater props. Clear or translucent filament gives it a glass-like appearance, and LED lights can be placed inside for…

Downloads
19
Likes
5
Rating
0
P
PrintablesDavidVC

Laboratory UV Lamp Stand for Vilber-Lourmat VL-6LC

We needed a proper stand for the UV lamp we use in our lab to analyze TLC plates because of safety concerns with a homemade cardboard box. A commercial stand can be quite expensive and it does not provide a real cover to minimize exposure…

Downloads
18
Likes
7
Rating
0
P
PrintablesMike

Open-source Laboratory Thermometer - Alpha version

See https://github.com/michael-dark/Open-Source-Thermometer for more info. This is the alpha version of an internet-connected thermometer, designed to monitor fridges, freezers, incubators, etc. to ensure proper temperature. It logs…

Downloads
18
Likes
12
Rating
0
P
PrintablesMysteri0Sam

Palm Laboratory Game Card Holder

A simple remix of Stef26's card holder for Palm Island I found on Thingiverse. The game cards can get a bit tiring to hold, especially when you have four ressource cards sideways. The holder makes the game much more confortable to play. I…

Downloads
17
Likes
3
Rating
0
P
PrintablesLowPolyFigures

Low Poly Laboratory Microscope

Low Poly Laboratory Microscope

Downloads
15
Likes
2
Rating
0
P
PrintablesCNES

Dragonfly by The Johns Hopkins University Applied Physics Laboratory (APL)

=== English version below the French description === Description (French version) Ce modèle représente Dragonfly (« libellule » en français), un drone volant dédié à l’exploration de la surface de Titan, la plus grande lune de Saturne et…

Downloads
15
Likes
2
Rating
5
P
PrintablesMetti

Stand for Laboratory power RND 320-KA3005D

Stand for Laboratory power supply, 30V, 5A, 150W, Adjustable, CEE 7/7, RND Lab https://www.distrelec.ch/de/labornetzgeraet-30v-5a-150w-einstellbar-cee-rnd-lab-rnd-320-ka3005d/p/30061863

Downloads
15
Likes
0
Rating
0