Search results: leather

Sort order

724 models

P
PrintablesSavageRodent

Leatherman Wave Holster - Delux

This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…

Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,184
Likes
190
Rating
4.93
P
PrintablesLubosH

Leather splitting, edge chamfer, cutting tool or just scrapper for utility knife

I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
60
Rating
0
P
PrintablesCatdad Workshop

tutorial: molded leather valet tray with 3D printed mold

Little known fact: I bought my first 3D printer so that I can print leather embossing stamps. This actually works pretty well if you are interested in it yourself. So to go back to my roots for a bit – and fitting with the Catch-All Trays…

Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant

Downloads
219
Likes
109
Rating
0
P
PrintablesBurnsie

Leatherman Bit Holder

I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
197
Likes
28
Rating
5

Leather stamp - Duck footprint

Leather stamp - Duck footprint Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
36
Rating
5
P
Printablesb4de4nd

Leatherman OHT molle case - No Support printable model

This model will carry your Leatherman OHT version clipped on to your favourite molle system. The model is made to print without support. I included the .3mf file, text is added in prusaslicer, and you can customize it to your own text or…

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
22
Rating
0
P
PrintablesBurnsie

Leatherman Pouch Accessories

The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…

Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
96
Likes
28
Rating
5
P
PrintablesPetr Honc

Leatherman ARC mod - toothpick and pin holder

Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
17
Rating
5
P
PrintablesFra Paschal

Stained Glass Holder - Leather Edge Dyeing & Drying Rack - Expandable Display

Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…

Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
25
Rating
0
P
PrintablesHighTechRedNeck

Leatherman Wave Holder Remixed

The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
7
Rating
5
P
PrintablesDP design

Stealth press leather Key-Bak remix

I didn't want to chop up the leather strap on the back of the Key-Bak, so I designed this holder: Less plastic Key-Bak doesn't stick out so far on the back I believe this will work with non-leather strap version as well Like the original…

Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
3
Rating
0
P
PrintablesArbre Designs

Leather Backpack Stiffener

Another request from my wife. She loves bags but this one was losing its shape when worn. After a few iterations, this one worked well. It could be printed in one piece if preferred. Printed in Elegoo PLA. Spine - 0.25mm layers, 15%…

Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
6
Rating
0
P
PrintablesJohn C

Leather Wet Mold

Hello, This is my contribution to a 3D printable leather wet molding system. I took a lot of the design queues from the readily purchasable www.BuckleGuy.com wet molds, but they didn't offer the sizes and variety I wanted. I'm a better 3D…

Downloads
1,781
Likes
285
Rating
4.67
P
Printablesyofi.blog

Leather or Hide texture or pattern roller

This is a high-resolution roller for putting a realistic leather/animal hide texture on clay. When printed, it's 14cm tall and produces life-scale leather texture, so it can be scaled down for smaller-scale leather.

Downloads
1,297
Likes
175
Rating
0
P
PrintablesJohan

Bic lighter leather case pattern

Wet mold your 2-3oz leather around the lighter and let it dry over night. Then glue/stitch around.

Downloads
1,153
Likes
118
Rating
5
P
Printablesmirabatek

Adjustable Leather Strap Cutter / Řezačka pásků

This is 3D printed version of classic adjustable leather strap cutter. The maximum leather thickness is around 5.5mm. You will also need following hardware: 9mm blade 3pcs M3 nuts 3pcs M3x15 screw 1pc M3x20 screw 1pc M6 nut 1pc M6x30 screw

Downloads
1,095
Likes
210
Rating
5
P
Printablesmartijntje42

Leatherman Toothpick for wave/charge/surge

A little toothpick which slots in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Print in layer thickness between 0.1 and 0.2mm for the best results use thinner layers. Use more than 3 walls so it will be…

Downloads
1,049
Likes
172
Rating
5
P
PrintablesUsername_65536

PDF pattern, STLs, and instructions for wet molding Buck 110/medium multitool sheath (Leatherman Fuse/Wingman)

STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…

Downloads
1,048
Likes
169
Rating
0
P
PrintablesJohnson Martin

Leatherback Sea Turtle Bust

This is the printable version of a Leatherback Sea Turtle I created for the Digital Life 3D Project . I test printed this model on my Ender 3 and now working on painting it. The main piece prints best with the head pointed upwards and the…

Downloads
991
Likes
139
Rating
5
P
PrintablesCoral

Mini Leather Couch

Here is a nice cozy well-loved leather couch. It's like the one we all had growing up that was nice and broken in to the perfect level of comfortable. Recommended print settings Layer Height: 0.2mm or less No supports needed This is a…

Downloads
881
Likes
99
Rating
4.83
P
PrintablesJack

Leather strap center finder/punch guide

This is a tool to help you find the centre line of a leather strap or belt, and then mark holes at an even spacing along that centre line. Ideal for making clean and professional looking belts, straps for harnesses or other tack. The…

Downloads
809
Likes
155
Rating
5
P
PrintablesMarcussy

PRESSLY the Leather Stitch Hole Puncher

Ever find it difficult to punch stitch holes in leather? Or afraid that you make too much noise hammering your fork punch and disturb your neighbours? PRESSLY can help! Using its arbour press style rack-and-pinion mechanism, you can…

Downloads
784
Likes
561
Rating
4
P
PrintablesTrehan

Belt end patterns for leatherwork

A set of two patterns used to cut nice end for belts and other leather pieces. The base width of the models is 20mm but it can be adjusted in any way you want in the slicer. A small organizer is also provided to keep them together. A 3mf…

Downloads
755
Likes
165
Rating
5
P
Printableskollonkuri

Leather stamp - Braid

Stamp for leather patterning

Downloads
708
Likes
164
Rating
4.5
P
PrintablesSitsero

Biker Leather Jacket Pencil Holder

Add a bold and edgy vibe to your workspace with this Biker Leather Jacket Pencil Holder ! Inspired by classic motorcycle fashion, this unique desk organizer combines attitude and functionality. Perfect for pens, pencils, brushes, or small…

Downloads
705
Likes
130
Rating
5
P
PrintablesTheViralDIY

Leatherman Wave Thumb Stud

After some testing found that shrinking the original down to 83.8% was a good fit. Also reoriented the part for printing Glued it in with super glue If you'd like to support me please check out my filament wishlist here Print Settings…

Downloads
675
Likes
83
Rating
5
P
PrintablesFustopeloso

Hogwarts leather stamp

Ready to use Hogwarts leather stamp. You need 2 pieces of flat wood and a screw clamp to stamp the image properly. Any other press will work anyway. Leave leather in water for a few minutes before clamp in position. Better to use a soft…

Downloads
672
Likes
129
Rating
4.67
P
PrintablesDaveNewman

Leatherman Bit Kit and Bit Driver Extender Pocket Organizer

This is a remix of my previous design for the Leatherman bit kit and ratchet driver pocket organizer found here . This new design is for the bit driver extender instead of the ratchet driver. It also now has positive retention for the bit…

Downloads
663
Likes
147
Rating
5
P
PrintablesGVC

Stitching Pony for Leather

This is a fairly simple stitching pony that is fully 3D printer, no hardware required, but you're probably better off buying a wooden one for like $20. This one only allows for clamping of small projects, like wallets. This is the first…

Downloads
635
Likes
178
Rating
5
P
PrintablesSoner Güler

Corner radius guide for leathercraft

4 different radius sizes exist. 1/2 inch 3/8 inch 1/4 inch 1/8 inch

Downloads
626
Likes
168
Rating
5
P
PrintablesGiorgioFoX

Thumb Tabs for Leatherman FREE P4 or P2

You can print this using whatever you want, I've obtained great results with PLA and TPU. No screw required, increase print to 102% if you use TPU to better and firmly fit into the blade. Buy me a coffee if you want to support me!

Downloads
601
Likes
72
Rating
5
P

Leatherman Wave Holder for Gridfinity

1x3 #gridfinity bin that fits a Leatherman Wave multitool. Remix of Zack Freedman's Gridfinity template. I'm adding this line on 1/14/2025 to prove to Makerworld that I am the original creator of this Leatherman Wave Gridfinity remix.

Downloads
595
Likes
99
Rating
5
P
PrintablesJohan

Watch Strap templates Leatherworking

Please note that these patterns are for the final size of the strap. You need to make sure you cut a bit longer leather in order for you to be able to glue and fold for the springbars. Use the pattern to get the correct final size and…

Downloads
574
Likes
71
Rating
0
P
Printableskollonkuri

Leather stamp - Triangle

Leather stamps for pattern

Downloads
574
Likes
128
Rating
3.33
P
PrintablesBre

Gridfinity for Leather Tools

These craft carts hold six by nine of the base frames. Visit Zack Freedman's Gridfinity library to access the original Gridifinity meshes and the frames or weighted baseplates baseplates. Leather Tools Featured Buckle Punch Burnishers…

Downloads
528
Likes
190
Rating
5
P
PrintablesScott Sieke

Leatherman Wave Holster

This is inspired by Adam Savage's aluminum Leatherman holster, but I have a 3D printer, not a metal shop.

Downloads
517
Likes
92
Rating
5
P
PrintablesDaveNewman

Leatherman Bit Kit and Ratchet Pocket Organizer

This model organizes the Leatherman bit kit and ratchet driver so that you can carry it in your pocket easily. It is a single file. I printed mine in Prusament PC blend with carbon fiber filament on a Prusa i3 mk3s+. Both bit kit cards…

Downloads
501
Likes
112
Rating
5
P
PrintablesPractiPrint

Leatherman Arc Holster (With Bit Storage)

I remixed the popular Free P4 bit holder to hold the new Leatherman Arc and include a positive retention bit holder as well. The print is a bit bulky, but I've used it for a few months now and it was indispensable while remodeling my…

Downloads
498
Likes
55
Rating
5
P
PrintablesAmdy

Leather mold for pen holder

Leather mold for pen holder

Downloads
492
Likes
145
Rating
5
P
Printablesdtphantom

Skadis Leatherman Holder

Uses the dovetail system to attach to the skadis system. Recommend printing at 0.2mm layer height otherwise the dovetails will be too tight.

Downloads
489
Likes
137
Rating
4.7
P
PrintablesMBanawan

Leatherman Arc Saw/File Thumb Stud

I wanted to be able to open the file and saw on my Leatherman Arc with my thumb so printed a simple insert. It would probably be more comfortable to print out of TPU (scale up 1-2% if you do for a snug fit) but I printed it normal scale…

Downloads
469
Likes
65
Rating
5
P
PrintablesWeefz

Stitching Punch Aid Plate for Leather

A simple hand tool that helps you pull stitch chisels out of the leather without damaging anything. 60mm x 35mm x 40mm Very lightweight. Works perfectly with cheap beginner stitch punches/chisels. Leave a comment if you try it with more…

Downloads
458
Likes
132
Rating
5
P
Printablestomeparker

Make a simple wallet - Leatherwork for beginners

A friend of mine owned this style of wallet ( 1 , 2 ). There's no stitching or gluing required to make the wallet, so it was simple enough to attempt as my first leatherwork project. Years later, I still use it and would recommend others…

Downloads
446
Likes
115
Rating
5
P
PrintablesAndrew London

Slim Leatherman Bit Kit Holder Remix

I wanted to make a more compact bit kit holder for the leatherman bits since the original ones that it comes with are bulky and take up a lot of thickness in a sheath. I modified a model I found and added an extra spot for the micro…

Downloads
444
Likes
63
Rating
4.75
P
PrintablesPrinted Bits

Leather Armchair

Another timeless piece a classic leather armchair Legs are printed separately and glued

Downloads
440
Likes
81
Rating
5
P
PrintablesUsername_65536

Mold and Forms for large (Supertool) sized Leatherman

Parts to wet mold leather and make a large multitool case/sheath. Finished inside dimensions are 4.5 x 1.5 x .75” (114 x 38 x 19mm) . BaseForm, Form, Mold, FormTrim, and Jig for a large Leatherman. Only the Form and Jig are needed but the…

Downloads
437
Likes
69
Rating
0
P
Printabless0171568

Airpods pro leather case set

A set of printed parts to form your own airpods pro case. All you need are these parts, a patch of leather and some tiny clamps. You have to wet the leather by placing it in a bowl of water for a couple of minutes. After that, you place 2…

Downloads
404
Likes
64
Rating
5
P
PrintablesEchteTim

Leatherman Surge Thumb Stud (Press Fit)

Handy thumb stud for the Leatherman Surge knife to easily gain acces to both of your knifes. The tolerances are made for press fit It is possible to secure it with some super glue, but not needed :) Printing settings layer height is not…

Downloads
403
Likes
35
Rating
5
P
Printablestitleunknown

(REMIX) PRESSLY the Leather Stitch Hole Puncher

Remixed the original design to have a better axle and handle attachment system. Also, include Fusion360 file.

Downloads
395
Likes
81
Rating
5
P
PrintablesJason Collins

Xtool F1 Leather Patch Jig

This is a jig for the 3x2in (76x51mm) rectangle and the 2.5" (63mm) round leatherette patches. It also has a handle for easy removal. I would really like to see your makes and hear from you about how it worked out.

Downloads
393
Likes
54
Rating
5
P
Printablesbarelyanything

Leatherman Bit Kit Verbinder

This takes 2 M3x20mm screw and nut to keep the Bit Kit together.

Downloads
390
Likes
91
Rating
4.86

Leather stamp - Duck

Leather stamp - Duck Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done

Downloads
373
Likes
89
Rating
5
P
PrintablesGareth Perrault

Leatherman Bit Case

Print times: Latch- 6m35s 3.96grams Body- 56m34s 33.33grams Print Instructions: Print in default orientation. No Supports needed. 2x walls. 10-20% infill. I printed in Bambu Matte PLA, but this should work with most materials.

Downloads
371
Likes
128
Rating
4.75

Edge polisher for leather

Edge polisher for leather. Suitable for all leather thicknesses.

Downloads
370
Likes
118
Rating
5
P
PrintablesGuillaume

Airpods Gen2 Leather case Mold

print the "corp 1" with support, print the "corp 2 " twice. saok your 2 piece of leather, and press a sandwich: corp 2 leather piece first corp 1 leather piece second corp 2 let dry the sandwich with pressure at least 24 hours. you have…

Downloads
362
Likes
91
Rating
0
P
PrintablesVladimír Waas

Leatherman Wave holder for Honeycomb storage wall

Leatherman Wave holder for Honeycomb storage wall

Downloads
360
Likes
77
Rating
5
P
Printableskollonkuri

Leather stamp - V

Want to try to create 3d models for some leather stamps. should be 100% infill and 3 side layers (if fits :D) to handle the hits.

Downloads
352
Likes
65
Rating
0
P
PrintablesCold Iron Forge

Leather tool and stamp holder

This is only 1mm thick so it's pretty flimsy. If I find a better balance between speed to print and strength I'll upload that version. This one does work just flexes when you pick it up while full.

Downloads
344
Likes
65
Rating
0
P
PrintablesMike2121

Leatherman Wingman Holster Refined

I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…

Downloads
335
Likes
46
Rating
3.67
P
PrintablesSascha

Leather Stamp

a little Leather Stamp

Downloads
335
Likes
64
Rating
5
P
PrintablesJohn Weaver

Leatherman Ratchet Handle

While this is my original print design, it is modeled after a similar production model for sale on another site. I am not affiliated with that product or producer, and I'm sure that product is of exceptional quality. This is just my…

Downloads
328
Likes
81
Rating
5
P
Printablesbambooknife

Leather mold for pen holder

Leather mold for pen holder.

Downloads
328
Likes
43
Rating
0
P
PrintablesModel Magic

The Terminator - T-800 Black Leather - 1984-FIXED

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
327
Likes
52
Rating
5
P
Printablesecht_fein_mann

Leatherman Charge TTi belt holster

Loosely inspired by Adam Savages Youtube video about making a belt holster from aluminium, I created this holster for my Leatherman Charge TTi. Belt size: up to 40mm wide and 3mm thick, but feel free to contact me if you would like a…

Downloads
324
Likes
21
Rating
5
P
PrintablesThe Weezel

Female Tiefling Rogue Studded Leather - Hymn

A character I play in a regular tabletop game. The base is designed for standard one-inch squares. The rest of the model is larger than a typical miniature due to being of human proportion and shrinking that down to 28mm size makes legs…

Downloads
318
Likes
23
Rating
0
P
Printableskollonkuri

Leather stamp - Circle

Leather stamp for pattern

Downloads
311
Likes
73
Rating
5
P
PrintablesTypical Titan

Leatherman Wingman easy open thumb tab

Easy open tab for the leatherman wingman utility knife. I got tired of trying to open it one handed and decided it needed an upgrade. Slight interference fit, meant to be lightly hammered or pressed into place to hold it in. I used a vice…

Downloads
310
Likes
38
Rating
5
P

Gridfinity - Leatherman Surge

The tool rocks a little in the bin, but works good enough for me. Feel free to improve on the design, step file is provided.

Downloads
304
Likes
96
Rating
4.75
P
Printableskollonkuri

Leather stamp - Shield

Stamp for leather patterning

Downloads
300
Likes
73
Rating
4
P
PrintablesMaz Z

Leatherman Surge Holster + Dual Bitkit

Angepasste Holster Version von 3D-Designer_AT für das Leatherman Surge mit beiden Bitkit haltern und für Gürtel bis 55mm Category: Tools

Downloads
294
Likes
45
Rating
5
P
PrintablesVaclav Poduska

Leather stitching marker

These stitch markers works same as your wing dividers for marking a stitching line onto the leather surface. The advantage is that these are set to the same distance all the time. You can change wing dividers between projects and you…

Downloads
292
Likes
69
Rating
5
P
PrintablesBre

Leather Wet Mold

8" x 6" x 3" Rounded Edge Wet Mold for Leather Crafting

Downloads
290
Likes
88
Rating
0
P
PrintablesZneuzity

Lanyard ring leatherman & toothpick for wave charge surge knife tool V2

Simple Toothpick with (or without) lanyard ring. Tool that fits in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Version with ring and without. Longer toothpick and short. Do not care about material, you…

Downloads
278
Likes
40
Rating
5
P
PrintablesJesse

Leatherman FREE P2/P4 Hex 1/4" and 1/8" Socket Adapter

Leatherman FREE P2 / P4 multi-tool adapter that uses the Philips head screw driver to allow any hex 1/4" (6.35mm) screw driver bit to mounted. The adapter can be stored on the clip. The assembly still fits inside the nylon carrying case.…

Downloads
273
Likes
61
Rating
5
P
Printablesryzellon

Pressly leather punch re-remix with 3, 4, 5 and 6 mm hot-swappable punch plates

I liked the changes that @titleunknown_285431 made to the Pressly by @Wallnutts_278875 , but I didn't have a heat-set insert for the ¼" bolt and I didn't feel that a single slot for the punch tines would work well for my purposes. I also…

Downloads
272
Likes
78
Rating
0
P
PrintablesChiefTK

Leatherman Flat Bit Pocket Screwdriver Kit

This is a remix of schutz's Pocket Screwdriver Kit. This kit holds ten of the flat Leatherman driver bits. They fit well in the elastic loops on the side of my nylon Leatherman sheath. I added extrusions for six 5mm x 1mm disc magnets to…

Downloads
268
Likes
48
Rating
4.5
P
PrintablesJay Peero

Leather Burnishing Tool w/ Heat Inserts

A leatherworking burnishing tool that attaches to a drill. *You will need an M.3 or M.4 brass inserts (whichever works, I used M.4), a corresponding headless bolt, and a lock nut of the same size. * To assemble: 1. Use heat to press a…

Downloads
265
Likes
67
Rating
4
P
PrintablesNabru

Leather Punch set organizer

Leather Punch set organizer for standard Leather Punch Sets. This is simply made to keep the Punches from rolling around my Leather tool kit.

Downloads
263
Likes
77
Rating
5
P
PrintablesTom_Designs

Leatherman Surge Quick release Holster

Geometry completely redesigned to accommodate the latest Leatherman Surge utilizing effortless retention. The tool slips in under its own weight and is held in place securely. Can be pulled out quickly and easily by pulling it up through…

Downloads
262
Likes
34
Rating
5
P
PrintablesWindArrow3d

Holster for Leatherman Surge with bit kit

I work in the Wind industry, and I have found that my Surge + full bit kit are endlessly useful as an EDC. Years ago I made a holster out of Polymorph, and it worked great. I always planned to design a holster for 3d printing, but I…

Downloads
255
Likes
34
Rating
0
P
PrintablesSprakle

Clampable Leather Stitching Pony

If you need a stitching pony for leatherwork but already have a bench vice, this is a simpler alternative that takes advantage of your vice! Just place your workpiece inside the plastic clamp, then place the clamp inside your bench vice…

Downloads
253
Likes
64
Rating
5
P
PrintablesLuggi

Leatherman Surge Thumb Stud

I added a hole on the underside of this model so that it doesn't get pushed out when opening it.

Downloads
253
Likes
30
Rating
0
P
PrintablesJohan

Leather wallet pattern

Pattern for a Leather wallet that can hold 2-4 cards

Downloads
248
Likes
69
Rating
5
P
PrintablesJack

Chinese Leather Shoe Patcher foot

Taking inspiration (but building from scratch) from Stoubian's zipper foot - this foot allows much closer alignment of a guide - meaning straight stitch lines as close as 2.5mm from an edge. Version 13 is updated with reduced stress…

Downloads
246
Likes
44
Rating
0
P
PrintablesKuch

Leatherman Arc Bit Holder

A Leatherman bit holder for the Arc. Picks up the fasteners for the pocket clip. Shown printed at .1mm layer height out of Polycarbonate with a .6mm nozzle.

Downloads
243
Likes
31
Rating
0
P
PrintablesJames Mayor

Tool holders for leathercraft tools for IKEA Skadis (SUMS)

An easy way to organise tools using the IKEA Skadis boards. Custom designed around leather craft tools. In three variations: Regular wooden handle Front-loaded in the tool holder, for the usual wooden-handled Ivan leather craft tools.…

Downloads
238
Likes
56
Rating
0
P
PrintablesMewraz

Gridfinity 1x3x3 Leatherman ARC

Gridfinity bin for Leatherman ARC. Tool is easy to pick up and under the tool there is a handle to pick up the bin. Pictures show a print with color change at the top 5 layers. Also ironing is turned on for smoother top surface.

Downloads
238
Likes
44
Rating
5
P
PrintablesModel Magic

The Texas Chainsaw Massacre - Leatherface - 1974

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
237
Likes
35
Rating
0
P
PrintablesBrad Bennett

leatherman screw driver handle

the leatherman wave is an amazing tool but not the greatest screwdriver but i love the leatherman screwdriver bit set with the extensions so i design this screwdriver handle that accepts the leatherman bit/extensions and now its my…

Downloads
237
Likes
54
Rating
4.75
P
Printablesh00rj

Leatherman Skeletool Hammerbits Mod

Remixed the Skeletool hammer to hold 2 extra bits in the carabiner/bottle opener. The bottom part snaps in place. v2 already available extra plastic around the pin-hole & less… uhhh “glitches”? The model is smoother, fits better & more…

Downloads
235
Likes
39
Rating
5
P
Printableswieli

Stitching Pony For Leather

Description This is a stitching pony for leatherwork / leathercraft or other stitching activities. It folds into itself for easy storage. It is designed to be a long-lasting item that can withstand some abuse while not breaking the bank…

Downloads
235
Likes
67
Rating
5
P
Printablesceo51378

Leatherman Free T4 Thumbstud

Thumbstud for Leatherman Free T series multitools

Downloads
222
Likes
27
Rating
5
P
Printableseastwg

Leatherman Bit Driver

Whilst great for emergencies, using the bit holder on the Leatherman® Tool can be a bit awkward so designed this compatible accessory to complement my Leatherman® Tool & Bit Set. I found most success printing handle first in PLA with…

Downloads
220
Likes
46
Rating
5
P
Printables3DSpenny

Gridfinity Leatherman Signal Storage

Storage for the Leatherman Signal compatible with the Gridfinity system by ZackFreedman . Grid size: 1x3x6 Note that fitment was designed with the pocket clip installed. Depending on which side you display, the Leatherman will orient…

Downloads
220
Likes
54
Rating
5
P
PrintablesPolymerToad

Leather Lace Skiver

This is a leather lace and strap splitting tool. It takes a standard utility knife blade. You'll also need two M3x14 (or longer) screws and two M3 hex nuts. You can adjust the thickness of the leather by choosing between the 2 different…

Downloads
219
Likes
34
Rating
5

Leather stamp - Deer with a doe 2

Leather stamp - Deer with a doe 2 Easy to use. 1. Moisten the leather with a wet cloth 2. Attach the leather stamp 3. Tighten the clamp and wait a few seconds 4. Done

Downloads
218
Likes
54
Rating
0
P
PrintablesGilly

Leatherman raptor shears belt holder (Multiple Sizes)

Recommended printing in 100% infill, Variable layer heights. The teeth being finer layer heights, PETG or PLA has worked nicely for me, Ender 3, Prusa Mini & Mk3 can print without supports, but its better with. I work for the ambulance…

Downloads
215
Likes
53
Rating
0
P
PrintablesMichael

Tormek Leather Honing Wheel LA-220 Alternative

This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…

Downloads
212
Likes
31
Rating
5
P
PrintablesAlex Don

Leatherman Arc Slide Belt Holster

I wanted to find a leatherman arc holster for my leatherman. I couldn't find one online, but I found a couple of models I could combine and create the thing I am searching for. Took me sec but I got it working. Main model I got from the…

Downloads
212
Likes
22
Rating
0
P
PrintablesPLAprinter

Leather shoe(generated by Revopoint POP)

This Leather shoe model was made by Revopoint POP. If you want to get more models like it, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Printer Brand: FlashForge Printer: Adventurer 3 **Rafts:** No Supports: No…

Downloads
211
Likes
19
Rating
5