7,329 models
This mini basket ball can be fully printed in pla and bounce very well from any (reasonable) height. I've found it works perfectly for indoor games such as passage cricket or any other creative indoor games. This ball was inspired by the…
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
I got a model of Toothless How to Train Your Dragon and used the new paint on color change of the Prusa slicer to turn it into Thunder of the new show Dragons: The Nine Realm s. If you prefer Toothless just remove all the colors or just…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for one variant
Did you lose/break the lace lock on your shoes, coat, sweatpants, hoodie, or camping gear? Did they not come with one to begin with? Say goodbye to self-untying shoes and slowly descending sweatpants with this 100% 3D printed gadget.…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
Headless Jack by https://aidinsalsabili.com/ This dude has some wicked stuff check it out. If you are using a resin printer The original from the sketchfab site should work with minor adjustments. lots more detail. before the addition of…
Print approx. €28.00–€34.22 excl. taxPreliminary estimate for one variant
Interactive Gear Board is a versatile, interactive building platform designed for limitless creativity and hands-on learning. The board features a modular grid with snap-in connectors for gears, rails, and other components, allowing users…
Print approx. €6.53–€7.99 excl. taxPreliminary estimate for one variant
Incredible range - incredibly dumb. “So cool!” - Nobody
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for one variant
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
F-14 Tomcat US Navy Fighter Jet (Made Horizontal For Less Support And Smooth Print)
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for one variant
Remix von https://www.thingiverse.com/thing:4599572 Schriftzug auf BMW abgeändert. Erweiterung bzw. Austauschteil für den Original Schieber am Wireless Charger. Passend auch für F3x, F8x und I01 (I3) mit Wireless Charging Ablage. Die…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
When my Friends and family members ask about what else can be 3d printed that isn´t a toy, (I mostly print toys and puzzles at home) I show them what I print for work, (mostly tools and gages) that's why this little and useful item came…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Video of the make The Supportless Cute Dancing Fox Figurine created by Macroglossum is now available for 3 color printing on bambustudio! Follow me on Instagram / TikTok / Facebook / Beacons Discover My Best 3D Models Axe Magnet Tank Toy…
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
I recommend using my gcode if you have a Prusa. PLA Lightning infill no supports 0.15 mm layers
Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant
I printed this in PETG on my Prusa Mini+ with 0.15mm layer height and no supports. Make sure to let it cool before taking it off the print bed so it doesn't bend.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
Hi all, this is a Mount for Amazon Alexa Echo Dot 5th Generation. You can slide the power plug into the mount and then plug it into the socket. No need for screws or glue. Supports are only needed for the cable holder. This is my first…
Print approx. €4.00–€4.88 excl. taxPreliminary estimate for one variant
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
Printing and adding to your used PET bottle and watering your plants is easy. Update 3/19/2022: Added file with brim for those having bed adhesion issues. Update 3/22/2022: I added a file with a brim and spike with only one hole.
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
Airless or Beanless Hacky-Sack. --TPU - Med-Hard. Version 2: hack.obj hack.3mf. I will keep the old hackeysack.3mf up. If Someone would not mind printing in in tpu and giving the old version a try and test run with TPU that would be…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
This is a remix of the model by Derailed3D. Schnipp already did a remix with a thicker tail as well, but I changed the shape of the final bump a little so you can decide between the two which you like best. Please disregard the different…
Print approx. €15.31–€18.72 excl. taxPreliminary estimate for one variant
Cut the thumb grip in half to shorten print time and clean up the look a bit. Printed in Overture Matte Black PLA with no supports on my mini.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is a remix I designed based on the useless box project provided by JustAddFilament in their kit. I added a fun little guy inside who will be closing the box and added a out of this world design to the outside.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Prusa Balance Game is great and the Prusa Balance Game Box is a great way to pack it. However, the Prusa Balance Game Box requires quite a lot of material. I have slightly adjusted the model by making the walls of the box thinner near the…
Print approx. €6.94–€8.49 excl. taxPreliminary estimate for one variant
Conically sliced (16°) Overhang Tower for the Prusa Mini. Download the attached GCode file and directly print it. The procedure used is described here: https://www.cnckitchen.com/blog/guide-how-to-use-conical-slicing Might also work on…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Hot Glue Gun Stand Support less Print in PETG
Print approx. €7.04–€8.60 excl. taxPreliminary estimate for PETGSource material: PET
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
First, some explanation. It's been over a year since I released the original model and because it's been kinda popular and I improved the design, I'm uploading it too. This one is designed for PETG, the original is for PLA. I originally…
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for PETGSource material: PET
This model is 3 inches in Diameter and 1 inch tall. its thickness is 0.2 inches and the distance between the removed hexagons is 0.1 Inches. This model was printed in 2 parts and superglued together. I would recommend printing with a…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for one variant
I created and released a few sets of #NoWalls Dungeon Tiles that use the OpenLock form factor. During development I wanted to try out the 5mm magnetic balls for easy connections without the OpenLock clips. I came up with a small…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
A Remix of a fine acessoire of a pool liege THE Benefit is NO Support prints in 22min at 60mm/sec PRUSAMENT PLA The Part can be Clued in Diferent ANGLES so it looks like more Individuel REAL Pool Live Enjoy
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Print approx. €11.34–€13.86 excl. taxPreliminary estimate for PETGSource material: PET
Mount to to put a pair of Sennheiser G3 receivers on a camera. One receiver snaps on the print, the second one is attached using a Sennheiser CA2 Shoemount Adapter for EW Series Camera Mountable Receivers. Uses a heat set ¼-20 insert in…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Holds the yootech wireless charger and phone for viewing while charging.
Print approx. €3.75–€4.58 excl. taxPreliminary estimate for PETGSource material: PET
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
I bought a new phone and had wireless charging from the old phone. Seeing the prices for wireless charging stands, I decided to make my own. This stand is designed for use with the Samsung S22 Ultra in Clear Standing Cover but I think it…
Print approx. €7.13–€8.71 excl. taxPreliminary estimate for one variant
Print approx. €9.14–€11.17 excl. taxPreliminary estimate for PETGSource material: PET
Fixed and sculpted some details that got washed out during clean up. "Motherless by George Lawson" (https://skfb.ly/oJ7PE) by Vision Fountain is licensed under CC Attribution-NonCommercial-ShareAlike…
Print approx. €18.43–€22.53 excl. taxPreliminary estimate for one variant
I frequently make quick use of my cordless Dremel tool and like to have it handy. Previously I hung it on a wall using the included metal hoop but that always left it facing away from me (so turning it on and off and controlling the speed…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Just something fun I made in Blender. Super easy to print. No supports required. If you are worried about bed adhesion with the feet, just add a raft with 2 or 3 layers. Nothing fancy. Any filament should work. PLA, ASA, PETG, PC, even…
Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant
Sony Pulse 3D Wireless Headset holder Print on "it's back" with 10% gyroid/grid infill and grid support from build plate only. This headset module couples with the adapater biltema (or the vanilla adapter ) so You need to print this…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for one variant
Use it to connect Cinetic Big Ball (CY22) appliances to wiress Dyson vacuum cleaner.
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for PETGSource material: PET
On reading the comments from the original it appeared the screw holes were being reported as to small. https://www.prusaprinters.org/prints/55082-universal-cordless-drill-hanger So before printing I added an extra screw hole and increased…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Phone holder on wireless charger pad for Volkswagen Golf Mk8. Holds iPhone mini on the centre of the charger. Without this holder is iPhone mini too small to stay on right charging position. The most suitable material for printing is…
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Here is my doserless mod for my Mazzer Super Jolly grinder. This grinder is an older version with a different sized motor cover cutout. Therefore I have made my own cover for it. The coffee shoot is a 32.5mm steel tube that I cut to size.…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
This is a remix of the Samsung Trio Wireless Charger Stand by thesneak155 . I made the adjustments below. No support is needed for the landscape attachment, but painted-on support for a small arch at the back of the stand I added a part…
Print approx. €356.35–€435.54 excl. taxPreliminary estimate for one variant
This is only the clamping part of my One-Hand Clamp Mod which allows the use of Bessey EZM and Wolfcraft Pro M directly on your perforated grid plate Workbench. This version works without an endstop and therefor doesn't need any Screws.…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
There are many reels like this out there for Paterson tanks. I prefer steel tanks, so this is my version. Print 2 each of Plug, Top, outerTube, and Teeth, and 1 centerTube. The parts should press fit together. Depending on your printer's…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…
Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant
Copact Stand for Samsung wireless watch charger. Its designed for originalwireless charger from samsung. We tested it with charger from Samsung galaxy active and samsung galaxy Watch4. I printed it with TPU, but PLA or PETG work well. PLA…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
This is a design I made for both the Year of the Dragon and for valentines, I just wanted to one design for both! This model is print in place, no supports needed. Works well in PLA or PETG. Bambu 3MF and .blend file included. Sculpted in…
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
to print the one piece scraper pause the print and install the blade with painters tape
Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant
Two vesions of handle for Yato yt-04645 keyless drill chuck . To assemble two M3x18 mm socket head screws are needed and two M3 nylon lock nuts. Screws holds chuck in position. Material: PLA, PET-G, etc Infill: at least 30% Layer high:…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
Super easy print! Just fill the print bed and go! I recommend printing with Smaller Layer Heights to keep the rigidity of PLA with 100% Infill . Please feel free to play around and let me know if you feel like any other materials work…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Just a quick design to hold my heltec board. You can use the 4pc. M2 screws & nuts which come with the board (but a bit longer screws 6-8mm would fit better), so no additional parts are needed.
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
There are many reels like this out there for Paterson tanks. I prefer steel tanks, so this is my version. Print 2 each of Plug, Top, outerTube, and Teeth, and 1 centerTube. Included gcode is a complete reel as a single print in Hatchbox…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Remix of: https://www.thingiverse.com/thing:4615791 Serverless Framework Brass Knuckles. Follow me for more Serverless stuff on Twitter: https://twitter.com/FilipPyrek Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports:…
Print approx. €8.64–€10.56 excl. taxPreliminary estimate for one variant
General description The adapter is mainly created for use with a peristaltic pump , where I didnt want to press the power button of the screwdriver for a while to keep constant speed. Using the adapter allows to adjust speed to your needs…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Very useless mug. Printed with PLA. Print information: 0,2 mm layer height, 0,4 mm nozzle, 20% infill, printed with supports under the mug handle. It can be printed smaller just as a funny decoration. Printed on Ender 3v2. With direct…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
This is designed specific to the dimension on the Normcore Breville espresso machine portafilter. The Normcore portafilter was slightly different than the Breville portafilters and using other funnels didn't quite fit. The inside…
Print approx. €3.18–€3.89 excl. taxPreliminary estimate for PETGSource material: PET
“Hexed pattern, download it while you can! No print profile because why would you print this for a prusa if you have a bambu? silly”
Print approx. €12.40–€15.16 excl. taxPreliminary estimate for PETGSource material: PET
Print approx. €9.39–€11.47 excl. taxPreliminary estimate for PETGSource material: PET
I was bored so I just tried new software. This is what came out of it. wire dodecahedron in dodecahedron…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for PETGSource material: PET
Remixed from the original, which fit the rack great (even without zip ties), but was a little tall, and I thought the screw on bottom issue could be solved. You'll need supports under the part that attaches to the rack (which I included…
Print approx. €6.27–€7.66 excl. taxPreliminary estimate for one variant
This is TS-FT002 holder suitable for inside of the retention tank. I recommend ABS, supports required only on build plate. When you will put TS-FT002 inside retention tank, ensure you at least coat the PCB eg. with nail polish, eg. like…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) Experience the serenity and grace of the Holy Mother with this finely crafted 3D printable model. This beautiful figure depicts the Virgin Mary in a peaceful, prayerful pose, radiating divine…
Print approx. €16.44–€20.10 excl. taxPreliminary estimate for one variant
This is an add-on for Makita Cordless Power Tools that can be used to automatically start your vacuum cleaner when the tool starts. It does this by monitoring the current being drawn from the battery and sending radio signals to an…
Print approx. €8.30–€10.15 excl. taxPreliminary estimate for PETGSource material: PET
The original case broke after I dropped it. Four 28mm ice cubes fit in the case. Print in given orientation.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
A week ago, I started working for a new employer and, to my surprise, I received a company phone – an iPhone 16. Since its use is limited to confirming logins to company systems, I thought it would be a good idea to have it on my computer…
Print approx. €4.26–€5.21 excl. taxPreliminary estimate for one variant
Bring a touch of modern elegance to your space with this Geometric Twisted Heart Vase . This model features a unique architectural transition, starting from a solid hexagonal base and gracefully spiraling into a perfect heart shape at the…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Handle for keyless drill chuck 0,3-3mm hex 1/4" shaft To secure chuck in handle M2,5x8 countersink screw is needed. Material: PLA, PET-G, etc. Layer high: 0,2 or lower Supports are needed under the shaft hole.
Print approx. €1.34–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
Similar model as the original. It can be used for lager pictures. The wall mount is attached to the picture with thin double-sided tape. Use a 4 mm round-head screw to attach the hanger to your wall. On the photos, you see a 70 cm x 50 cm…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for PETGSource material: PET
Original onShape project: https://cad.onshape.com/documents/0c3b8288c7b92d178ec1f3ff/w/b7a05d6d8787b131fd44b065/e/38e3f2fc0970434ac8e5aed7?renderMode=0&uiState=68fe239e2195008bbebe03d0
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Contactless sticker for airbank
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
To print from STL make the oIn board game Stationfall there is only a token for a antimatter. This antimatter looks like that one on that token. Useful when you have 3D figures for this game. To print from STL make the object bigger 606%…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Picture with the blessing "Asher Yazer", to hang outside the bathroom. With option for messengers on the back. Based on the frame I created: https://www.printables.com/model/1233489-picture-frame Gcode for printing attached - not yet…
Print approx. €11.25–€13.75 excl. taxPreliminary estimate for one variant
Insert the cylinder Glue the sides Glue the handle You can also glue the bottom :o). Changes: 20231124 - uploaded new files for bottom part
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Wall Holder for Cordless Screwdriver Set In 4 different Variants. With logo for WORX, KS-Tools and Kiprim as Well, without LOGO. Happy Printing… Set on Picture: KS-Tools 515.3699 Printed on: Original MK3S+ Filament: NOYES PLA Grey
Print approx. €14.45–€17.66 excl. taxPreliminary estimate for one variant
Simple manual m10 winder for hammerless tent pegs (https://www.printables.com/model/721456-hammerless-tent-peg) Printed in PLA with 4 walls and 100% infill as a prototype and haven't broken it yet!
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
I needed something to keep my Aquarium Python hose from getting a kink in it while doing water changes. Normally the hose lays across the tank rim and gets a kink in it slowing down the process. This simple solution keeps a nice curve to…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
Easy-to-print Baseus Simple Wireless Charger mount meant for epic Honeycomb storage wall . I designed this accessory for Baseus Simple Wireless Charger (Updated Version) (exact model: BSWC-P10C ), but it should work for any round wireless…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Supportless Remix of edmars Hotend Holder. This is just the holder for 4 hotends, you will need to download the labels from edmars original model: https://www.printables.com/model/792420-mk4-hotend-holder-support-honeycomb-storage-wall-s
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
Name tag for you to give to your Alessia! Use the loop in the A to attach to anything you want! backpacks, rear view mirror, water bottles, you name it! recommended to print in a flex filament to not make as much noise when knocked into…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Holder for a tedeligo remote control. To get the remote out of the holder you can push the keyholder up. Printed in PETG; Nozzle 0,4mm; 0,2mmlayer hight; 5 layers wall, bottom, top; 25%infill; support everywhere. Printed flat to get the…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Držák pro přesné uchycení telefonu pro bezdrátové nabíjení Huawei.
Print approx. €0.85–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
The idea was to print two identical halves, glue them together, and fasten them where the entrances to the hutch and to the pen meet. But these bunnies are conniving buggers. They soon proved this arrangement insufficient to contain them.…
Print approx. €13.77–€16.83 excl. taxPreliminary estimate for one variant
Absolutely love the idea by @LeonH for the monster trays and other card holders. I printed all in PLA (prusament galaxy black / eSun fire red / eSun white/Sunlu green (turquoise)) with 0.6 nozzle and 0.3mm layer height (text with 0.2mm).…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
1/4 " Jess Em Jig The stainless steel Jess Em doweling jig (thin) are good jigs. In some situations, the jig is too thin to locate on a dowel to drill mating holes. This spacer shims up the jig so you can locate on the dowel. This shim…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
Adapter for inflating Sleeping pad with PARKSIDE air pump, I use PCTG and 0,25 nozzle
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading “Bless this Mess”. Not an uncommon request, somehow. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
The original battery cover on the VEX 123 Coder uses a screw. This design simply pops into place, no screw required. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes Support Type: Organic/Tree, on build…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Motivation I purchased a Thermoworks RFX Wireless Probe Starter Kit and wanted a dock to efficiently store and transport the probes in their charging blocks between the kitchen and my grill. Solution Design a custom Gridficiency-based…
Print approx. €4.03–€4.92 excl. taxPreliminary estimate for PETGSource material: PET
This is a wireless hand control box for ONSTEP telecscope GOTO system. Note that there are various momentary tactile push button switches, and one needs to modify those caps for his own choices. (e.g.,…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Versiering van een flessendrager met bloempotjes. Ik heb de potjes vernist aan de buiten kant met blinkende vernis. Aan de binnenkant heb ik zwarte lak ferv gebruikt tegen water lekkages. Decorating a bottle holder with flowerpots. I…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
I purchased a CLLENA AC to DC Converter (20A 250W 110V~240V to 12V) with a Car Cigarette Lighter Socket to operate my IGLOO ICELESS cooler when not in the automobile. Designed this organizer to hold the power supply and cords on the…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for PETGSource material: PET
See www.BirdWatchAI.com for all of the details on how to setup the software. Free download. You can print/build it all yourself, or purchase a setup kit. See the live community feed of feeders currently running the BirdwatchAI software at…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Screwless Cover for 100×100 mm Flush-Mount Junction Boxes This blank cover simply pushes into the box. Each side has a flexible tab with a snap nose that presses against the inner wall of the box and holds the cover in place. Handy when…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
![Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]](https://media.printables.com/media/prints/708849/images/5560717_ae14a831-061b-4090-9d33-a60d35514964_04cd4bb4-c195-4a5b-b810-5629f3b2daa1/perspective.png)
