Counting matching models…
Designed for a college dorm room lofted bed, this organizer tray is meant to attach to the safety rail. It is provided as multiple components for easy printing (and colour coordinating). Several different sizes are provided for the…
Print approx. €9.63–€11.77 excl. taxPreliminary estimate for one variant
This is a simple but sturdy hook that clips securely on to the 42mm x 42mm rails of an Ikea KURA bed. I printed it in PLA, but other materials might work even better. It has no problem holding towels, robes, headphone or even a bag full…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
The bracket was designed for a roof with a 50deg pitch. It may not work on really shallow roofs. It prints without supports. As there are no fillets between the bracket and the plate (in was a hack in a hurry, there is an issue with…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the Loftyo figure! The incredibly articulate, insanely expressive action figure for displaying, playing, and animating. This figure is the result of five basic craft prototypes, hundreds of hours spent learning blender and 3-D…
GONE ARE THE HORRORS OF THE 3MF! The loftyo figure, now as a downloadable STL! Enjoy!
My takes on the NPCs and Creatures from Van Richten's Guide to Ravenloft are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
First take the face plates and glue a piece of magnet sheet inside it. For the neck glue one to the front and done. you can draw two half's of two different expressions on piece of paper and glue it on the face plates put all the pieces…
if it breaks I don't why because mine works fine
this is just a frame so I have not added any cardboard this is in case you dont want to edit your lego peices.
you're about to get so loftied
This is the lofty 13 a combination of the lofty mech and the dummy 13. Sadly you can only use ABS or PETG on this print. The reason being PLA is to soft and brittle. When assembling the Lofty 13 make sure and go slow because while I was…
My little sister's hamsters needed a new house, so I made them one. The example on the picture was printed with Wood PLA, 10% Infill and 0.2 Layer Height. Good prints! Note: A second version of the ramp is available, since the first one…
Gone again are the horrors of the 3MF! The Loftyo figure - now separated for easier multicolour printing - now as STL files! The files are named, and you will need one of each, however choose either with or without magnets for the head…
Designed to slot over the safety rail of a bed loft / bunk bed. Multiple sizes available to best fit the rail. Tension screw provided as separate model. Due to the size, this is a challenging print. Print on a side, using supports to…
Loftyos hand expansion pack
This is a remix of Jackharvest's Bed Shelf. I already printed a couple of those and they work great, but found my kid quickly filled up the available space. With this remix I slightly rounded the edges so hopefully banging your head into…
Tired of the same hands? Then look no further! Brand new hands for your Loftyo! Whats not to love? Print either Loftyo All Hands or ones of your preference!
A small shelf that fits perfectly as a bedside table for the Ikea Småstad loft bed. The model include the base and a border that you glue on top so that things don't fall down. There are models for a left- and a right hand shelf depending…
Do you want the hand expansion pack for the lofty action figures look no futher
the newest thing to be spit out by the What The Mutt Studios 3D Design Division, this is the Lofty version of the new loftyo by Lofty! while there are a few other Lofty Loftyos made by very talented people, I wanted to: 1. make my own for…
Here is a lofted twisting trellis in a pentagon shape for your garden plants! I include both a single & 4-tier trellis. You can print just a single trellis, a 4-tier, or print out many single ones and stack them to the height you desire!…
This is the buff torso to lofty don't forget to take a picture and show it to me
repo loftyo this is a fixed one because the first one was messed up
Loft Studios has made Brody animes infamous swoosh and to complete the trio I made hamination I have looked though all the video's w/ Brody and swoosh and I can say that my model is extremely accurate to loft studios Also you can not use…
lofty armour MKll! this is a 3d printed version of the lofty armour. you can stick carboard around it to make it look better, if you want to know how to make it look like the lofty armour, click loft studios tutorial on youtube
This is the lofty version of the loftyo, with round face pieces, and extra hands.
Guilded guy is the first figure where one face piece can equal multiple faces
This is a recreation of the Loftyos faces from Kickstarter (including the exclusive ones). It features two more faces
It's a Loftyo attachment, enjoy making it kind of look like swoosh. You do need to get the ball that slides into the hair peace because I re-used it. Also, you'll need to rotate it 90 degrees because I modeled it upright.
nice and fast Game-Terrain Printing you can even just change color ground-House-roofe DONE Have Fun LEAVE a LIKE as you Download !!! Please see the other Stuff here i made ALL FREE Download !!
Basic face pack for the Loftyo figure based off WTMS's original design. Print Settings: Layer height: 0.2 mm or lower Supports: No Brim: If needed Additional notes: I like to scale to 101% for a slightly looser fit and easier assembly.…
Included are 3 sizes 21 mm, 26mm, and 31mm A STEP file is included for custom sizes or you can scale it in your slicer Print with 4 perimeters for strength. I'm able to hang my heavy backpack with out a problem
Simplified on blender
A sturdy accessory to the kids loft bed from Ikea. Great for backpacks and other heavy stuff that you want to remove from the floor. Print in PLA or PETG and 0.2 layer height
Instead of a 3mf file it's a stl file
Spent some time looking for hands that could hold weapons, then slimmed down the existing ones I found on the Lofty skin (remix source tab). UPDATE: I have found the hands on the Lofty skin are in fact stolen, I have provided the original…
Print with support and 100% infill for extra strength. Use gently. Use at your own risk.
The new loftyo armor mk2! i wasnt satisfied with the first model, so i upgraded it with cooler weapons, and more armor parts! of course upgrading some things aswell ;)
Is your loftyo bored of being a regular figure? Well, not anymore! Now he can fly with a cool jetpack and he has Rocket launchers! A blade! Machine guns! And A cool helmet with custom faces! Photos soon!
a machine gun arm for the new loftyo figure
A full mashup of all my previous models. Includes everything to upgrade your Loftyo to the Underpaid/Overpaid Assistant, and more! Included: Underpaid Assistant Face Pack Overpaid Assistant Face Pack Buff Torso Display Stand w/ Ring Base…
As the insert of the D&D board games are, to put it mildly, "less than ideal", I decided to make my own. Borrowed the cards inserts from thingiverse , but made the rest myself.
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder. The loft ladder is quite old and the manufacturers label has long since gone. I think it was made by ABRU. There are four…
so I made the stick figure so I could also make raxdflipnote
Giant anime swords are cool and all, but they're totally impractical for actual use and even just storage. Luckily, action figure scale blades aren't really heavy! This is also compatible with all of soozafone's 13 Series of figures,…
Created this out of a need so that my daughter had a cup holder and something to hold her remote. Only needs supports under the part that holds itself on the loft bed rail. 20% Infill does great!
Clips on to the railing rather tightly. I've printed it both with and without supports (build plate only), on it's side. Turned out good enough, bit rougher without supports, as shown in the photo (before cleaning up rest of the…
The design comes with cord-holding attachments and fits phones 7.5in x 4in. Install by sliding over the metal frame of the bed, similar to the guardrails normally provided by your University. Supports: None Weight: ~90g Layer height:…
The 3D printed pendant lamp in an industrial lantern style is a versatile lighting fixture that comes with parts for two different configurations: One Shade Version : Two Shade Version :
Needed some face templates for the Loftyo (I'm bad at drawing XD), so I modeled some for the UDPA (Underpaid Assistant), since it's my favorite Loftyo model. Update Log 23/07/2026: Added new files for more detailed printing. Settings:…
Dad broke one of the feet on his loft ladder, so I designed a new one in Tinkercad. Hopefully someone has the same brand and will find this useful in future! Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0.12 Infill: 100%…
I needed some more faces for my Garrett Loftyo, so I modeled some simple ones. Print Settings: Layer height: 0.2 mm or less Supports: No Brim: If needed Additional Notes: The model in the thumbnail is this one made by @supergood24. Happy…
Universal Osvac to square (66mm * 66mm) adapter. Holes for M4 screws (60mm apart)
Does your loftyo figure not stand or fly well now you can with the Loftyo stand. You print the stand and as many joints as you need to make your figure fly, stand, fight, or any other wakey thing. Please post your makes so I can see all…
Here is the new version of my Sonic figure!!! and a brand new SUPER SONIC MODEL!!!!
the newest thing to be spit out by the What The Mutt Studios 3D Design Division, this is a face thing for the Loftyos! below is the link to the model in TinkerCAD so you can modify it. I wanted indentations to make coloring in the slicer…
a car for loftyos and also pls print in petg also heres original link https://makerworld.com/en/models/2294753-the-carboard#profileId-2504161
This is my version of Loftyos Sonic! hope you guys like him!!!!
This was printed on the Monoprice 3D printer with Hatchbox 1.75 mm True White PLA. No supports are needed, just make sure you have vase mode turned on! For the paint job, use cobalt blue (or any other colour) and hit a wet paint brush…
One of the feet on my IKEA Tuffing loft bed broke and I needed a replacement.
Dimensions work for most iPhones but are easily adjustable in the f3d file attached. Me and my friends found it very useful.
This is a simple light cover that fits over standard fittings designed for DIY covers and lamp shades. It was specifically designed for the wall-mounted lights on the outside of my house, but you could use it in other ways. Easy to 3D…
Needed a cup holder for an IKEA loft bed (Storå), so I made one. It sits quite securely over the wooden plank, but I've included a screw hole in case you want to screw it in for an extra secure fit. I made this to fit a specific water…
Shelf for SVARTA Ikea loft bed All printable, no extra bolt or glue required. Box size: 13cm * 21cm Small notches around the box for sturdy fix.
I printed with gyroid infill, 55%.
Build with baseplate support with the round key upwards. I used an 0.2mm layer height and printed in epa-cf but other strong filaments will also work such as PETG. Recommend 3 perimeters and 30% infill.
Soporte para mando de luz led en cama alta SVÄRTA loft de Ikea, impreso en petg.
Here is my attempt at a box insert for Horrified D&D Ravenloft. I used the measurements from my Horrified D&D box insert because I knew it would fit the box. That one was made using FreeCAD. This time I used Fusion. This one tripped me up…
Phone holder designed for lofted beds. Works with all lofted beds by attaching to the ladder. Comes with cord clip for when phone is not being stored. Comes with cord slot for charging with phone in the holder. Printing 120g 0.2mm layer…
yellow lofty repo props
Changes: Added a top, back and sides to the original Loftyo head. Removed magnet slots. Images are of the Loftyo figure printed at 150% scale.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
When our son got a new bunk bed, he wanted to find a way to be able to keep his water bottle near him so added a cup holder to a bunk bed hook. The hook was a perfect fit.
it's just some hands that are magnetic for lofty
This is an indoor golf disc that works well as a putter. It is about 75mm in diameter and weighs about 11 grams in PLA. It's over 14mm high which makes it slow. It is reliably understable. It doesn't work very well outdoors. This disc is…
I modified the upper arm of an amazing stand for Dummy 13, now it fits the back socket of The Loftyo Figure. The rest of the pieces are the same. Print Settings: 0.2 mm or less layer height No supports I used PLA for this, though PETG is…
Adds a raspberry pi over the "new" Woodpecker CNC controller for CNC3018 machines and others alike. It was designed to be held by the existing screw holes of the clear case. Fit is tight. it will be held just by pressure. Two versions…
My daughter has a loft bed with a slatted frame. Underneath is a couch ant thus she asked for a way to fix her LED decoration below the bed. I quickly designed these hooks that clip around the sprung slats of the bed (slats 54,5 mm wide…
Loft: Loft floor is raised 100mm above top of printer to prevent sharp bends in filament path. Loft is fully enclosed to keep humidity down, and also to keep heat in the print chamber below. There is a temp/humidity sensor in the loft and…
This is a studmation's lofty but as a 3d printed model. There are extra face pieces and hand pieces. I know that the hands are the Dummy 13 hands, They are a little hard to put on but it works. thank you!!! Instructions on…
After fitting my new Loft hatch from Jupiter Blue, I found it was a stretch to open the hatch and impossible for my partner to open. So I made an attachment that connects to the 12mm aluminium box section of the pole for the loft ladder.…
lampe wurde verbessert Lamp has been improved
Fully parametric Raspberry Pi 3 mount for a CNC endmill mainboard with a 90mm x 75mm bolt spacing. Mine's a Vevor 3018 CNC but the 3MF/STL files will VERY probably fit other sizes of CNC's as long as the mainboard bolt spacing fits those…
Provides additional support in the loft side of spot lights where insulation is too heavy for the spring clips and pushes the light away from the ceiling. The loft insulation can now sit on top of the printed part and not push the light…
Simple yet lofted/lobed vase. Not much else to say. Print one at 200% and give it to your partner with some long-stemmed roses for all the time and money you put into 3D printing. ;)
Another vase designed on SolidWorks for holding flowers. No supports required.
