2,788 models
Easy to 3D print security cover for enhanced privacy with your handy Logitech StreamCam C980. No glue, just click the cover into the frame hinge and mount it on the camera. Easy to open, easy to stay close. Printed in cca 30–40 minutes…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Original on Thingiverse: https://www.thingiverse.com/thing:4177079
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for PETGSource material: PET
A two piece lens cover for the Logitech StreamCam. Use any bit of filament, 1.75 mm, as a pin for the hinge. Can be printed without support
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…
Print approx. €5.22–€6.37 excl. taxPreliminary estimate for PETGSource material: PET
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
This is a remote control holder to fix on a aluminium extrusion of a simrig. You will need two M6 counter sink screws. If you like the print profiles, please consider rating them. Thanks :-)
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
When the rubber on your mouse has decayed more dramatically than my will to work after vacation — it’s time to 3D print a fresh shell for those sweaty gaming sessions
Print approx. €6.23–€7.61 excl. taxPreliminary estimate for one variant
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
20 deg stand for a M70 Logitech trackball
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
I was looking for a way to mount the Logitech C920 Pro inside the Original Prusa Enclosure . With the help of Markus and his Slim Mount Base , I modeled up a corner mount in front of the LED strip of the Original Prusa Enclosure . It is…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
This is a holder for a logitech meetup, so that you can place it on top of a TV. You simply slide 2 of these holders onto the logitech meetup, and then you can place it on top of a TV. It might not work on every tv, but should work on…
Print approx. €4.03–€4.93 excl. taxPreliminary estimate for one variant
Bit of a mash up I was already using the X-axis cable strain relief clip, so I incorporated geektoybox’s C270 webcam mount. Perfect for spaghetti detective or general nozzle/print checking. Added an extra 10mm offset towards the rear to…
Print approx. €0.99–€1.22 excl. taxPreliminary estimate for PETGSource material: PET
There are many webcam mounts available - unfortunately, I couldn't find one to raise a Logitech Brio 105 on my DELL U2722DE - so I measured and constructed my own :) I printed sideways with supports, see pictures
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Simple camera mount for Voron no supports needed Necessary screws: 3x M3x8 1x M3x20 2x M3 hammer nut
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for PETGSource material: PET
This is a cover that slides over the existing x-axis tensioner and does not require any hardware or modifications to secure to the machine. Use an M3x30mm bolt to self-tap the threads holding the camera to the mount.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
I printed in PLA 0.3 draft layer height with brims. I had to clean up magnet holes a bit before magnets fit snugly in. There was a bit of a gap between front and back so I used a soldering iron to further sink the magnets in place. One…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for one variant
My kid has a laptop for school this year and wanted a wireless mouse.. I am letting them use my Logitech M557 travel mouse, but I wanted a case for them to use to protect it.. Photos mounted in Fusion360 as a Canvas, some design later,…
Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant
I used the last version of my keyboard foot successfully until we got a new cat who flopped his entire 14lbs onto the bottom edge of my keyboard. This resulted in these tiny molded plastic stabilizing fins to break off on one side of the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Ножка для клавиатуры Logitech Deluxe 250 Leg для клавиатуры Logitech Deluxe 250. Обе ноги зеркальные. На одном столе. Печатайте с опорой со стола.
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Español: Soporte de webcam Logitech C170 para la Ender 3 Pro. Este soporte está modificado para que no choque con la cama caliente. (Ver fotos) English: Logitech C170 webcam support for the Ender 3 Pro. This support is modified so that it…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
The small slit at the left edge of the camera opening allows to see the activity indicator without opening the slider. For the print, supports are necessary for the “Back” piece. Assembly Insert the slider into the indentation of the…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Printed using PLA.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This is a remix of my previously posted print Privacy Cover for the Logitech C610 Webcam that adds an eye when the cover is open for a constant reminder that one could be being watched. Print instructions Load Galaxy Black in spool #2,…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
I somehow had nowhere to put the mice, and you really don't want two mice on a mouse pad when you only have one hand to control the mouse. Mouse models are enlarged to 101 % of the original for stand purposes. I recommend printing with…
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
Re creation (not remix) of https://www.printables.com/model/216076-tightening-key-for-the-logitech-driving-force-gt-w Made for easier printing and added comfort Printed at 0.2mm layer height with 30% zigzag infill Also added .ipj file for…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Logitech C902 Webcam Cover - Sleek and Functional Privacy Solution Protect your privacy in style with this custom-designed webcam cover for the Logitech C902. This 3D-printed accessory is the perfect blend of practicality and aesthetics,…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Its a tight fit so that the cable stays where its supposed to You may need some extra tape on the back(probably not): To mount it just put some tape on the bottom: Here is the cable from AliExpress:…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Caution there a different sizes of those legs. Mine was 20mm wide and 26mm long.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
The Logitech G535 headset features a swappable headband, but many affordable (and even some pricier) aftermarket bands tend to fit loosely and slip off easily. This small part provides a simple, reliable solution to keep the band securely…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
The battery you can usually find on replacement parts sellers is smaller than the original. It can jostle around if you bang your head as hard as I do when listening to music. Features: Printable in vase mode; Cutout for easy access to…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
UPDATE: I've redesigned my own version of this from scratch, you can find it here: https://www.printables.com/model/800917-logitech-g-shifter-gated-manual-and-shift-knob I remixed the model by simply combining the 'base' and 'top' part…
UPDATE: I reorganized the files so they are easy to find in chronological order for printing and changed some file names for better understanding. I deleted the back plate file from the project due to confusion about what to print. I also…
Designed to be as simple as possible and perfectly functional. Easy to install and works wonderfully. I'm selling this model on my Etsy, the CC license is non-commerical for anyone else:…
Clam shell protective case for Logitech MX Master 3 & 3S. Magents Fits together with either four 4x4mm or 6x3mm magnets. Choose the right files below. Location Pegs Cut 2x 8mm lengths of 1.75mm filament. Press fit or glue into the small…
This is a remix F1 Style Steering wheel for the Logitech G29, now allowing you to print the centre part in only one piece making it easier, faster and stronger to print. 3 parts to print: 1x “G29_Center” 1x “G29_Handles_Back” 1x…
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…
Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…
FINALLY FINISHED I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! Background Story This Model was initially made for school and then continued in my…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
Prints without supports. I used 0.16mm layer height with 15% infill.
Use original screw to secure on shifter. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Anycubic PLA Grey Notes: Any material does the trick. Category: Gadgets
I've recently encountered some technical difficulties with Printables and Stripe, which means I can't sell the complete version of this model with the screw holes right now. I'm actively working to resolve these issues and hope to set up…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
The model can be printed with PLA or PETG, the orientation is clear, no supports are required. Layer thickness of .2 mm is suggested, with 3 lines for the walls. The infill is not relevant because the thickness is a little more than 2 mm,…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…
Update: Added a tolerance test based on feedback from makes. Please check fit with this part and adjust XY scale for desired fit before printing the whole part. Background I took the basic design from my M12x1.75mm shift knob and adapted…
Please keep in mind that this only fits the GPX 2. Enable tree support for cleaner screw holes and easy removal. Can be printed out of any material, preferably stiffer ones, but still very usable even with PLA. Base alone saves around 8g…
This is my take on building the perfect gaming mouse. Just 27 grams, without sacrificing ergonomics. It’s based on the Logitech Superlight 2, and in my opinion, it carries the legacy that Logitech has built over the past two decades far…
Basic case for Logitech MX Master 3. Snaps together with two 6x3mm magnets. The Magnets should be a push fit. EDIT 23.04.2022: I added the raw STL files as requested by albza EDIT 24.02.2025: Added a V2 where the pockets for the magnet…
LogitechG305 Mod compilation. You will find everything you need to fully modify your G305 and tinker with it to your hearts content… or maybe just create your own mods :D Update 2022.7.6 : Added more mods including an insane 20-30gr mod…
Easy to print F1 style wheel. Goes together with glue/epoxy, or if you want the ability to change handles you can use Qty 4 M3x14 screws, Qty 4 M3 nuts, and Qty 8 M3 washers. This design was tested on a G29, but likely fits on G27/G920.…
I had my logiTech headset for a few years but the plastic caps broke and i wasnt able to find any replacements, since the last version that i uploaded i have added two small pins to the inside cap the pins hold the metal part that is in…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Logitech G923 Xbox F1 wheel
Keyboard feet for logitech k270 Printed in PLA
Modified from an existing design, fits with a 5mm x 3mm circular magnet. Glue needed by the way if you want the magnet to not fall off whenever you take finger rest off, since I made the hole to be 5.5mm wide. If you'd like it to fit with…
you can print it without supports use some 1.75mm filament for the hinges
Print however you want to, my settings were pla .4mm nozzle with .15 layer height. The circular hole is designed to accept a 6mmx2mm magnet glued in place(there is a magnet in the mouse so really any small piece of metal glued there…
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
Since Logitech doesn't provide any spare keycaps for the MX Keys keyboard, and I didn't want to buy a completely new keyboard I decided to try and make a replacement my self. Once installed it works and feels just like the original. As…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
A print-in-place replica of the original logitech cover. Print instructions Printed on my MK3S in PLA at 200um layer height and no support. Update 20210207: On the first version, the lid did not close perfectly. I have slimmed the lid by…
The camera is angled down by 3 degrees. To use this you need a 15mm or so M3 bolt, and a couple of M5x8 bolts and T slot nuts. Remove the monitor bracket from the camera, the mount then fits in place of the monitor bracket. Note the…
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
The foot / leg on a Logitech keyboard broke, this is a replacement. In one of the photos I have shown the original foot (grey) and the replacement (black) side by side.
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
Saw this video by Optimum on a super lightweight mouse mod and wanted to make my own perfect mouse - both super lightweight and the productivity of my MX Master. The result ends up being 60g total, and retains pretty much all of its…
The original model was perfect for the 92 base size keys, but the other 18 keys all had additional sizes. Popped off measured and tested all of the other sizes and they all fit and work. Caps was the most tricky, but what Ive got here…
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
Original description: https://blog.exz.me/post/logitech-g604-mouse-scan-data-and-rubber-replacement/ See original upload for links to scans themself https://www.thingiverse.com/thing:6569173/files
Case for the Logitech MX Master 3 and its wireless receiver. 8 6x3mm magnets needed.
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
Update [23.7.2025] added versions for 25mm and 20mm long screws. *Added at the request of @SamC_3382651, I haven't printed them personally, but they should work without problems. Hello. I have a Logitech G Pro Wireless…
This is universal smart knob for Logitech MX keyboards I designed for Logitech MX Keyboard Adaptive Add-ons contest. How it works: The knob converts rotational motion into physical key presses. Turning it clockwise presses the right key,…
🔁 Compatibility The 3D prints can be used on any Logitech G29 , Logitech G920 and Logitech G923 . The only print that's specific to a Logitech variant, is the lower bezel , which at the moment is available only for the G29, or PS4/PS5…
Reupload of a popular wheel mod for Logitech G racing wheels. This includes everything you need to print it and get racing. G920 Tutorial - This is the video I used to figure out how to install the wheel. When reassembling, don't install…
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
This model is inspired by this adapter: https://cults3d.com/en/3d-model/game/adaptador-secuencial-logitech-g29-g27-sequential-adapter-logitech-g29-g27. The model is good but I wanted it to be more tight fitting and to be able to use…
Wheel center hub replacement faceplate with Nissan GT-R logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (red recommended). Remove the screws on the original center…
I accidently broke my feet on my keyboard, Logitech K850. I couldn't find replacement parts so I modeled these using SketchUp and created the STL files for both the 4 and 8 degree feet. Support is needed for the the pin alone.
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Simple legs I designed and have been using for over a year now
One evening I was on the rear deck and picked up my iPad Pro and accidentally knocked the Pencil from the magnetic mount on the side of it. The $130 Pencil fell through the spacing in the deck boards and into a damp, dirty crawl space.…
Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…
