160 models
Make Grizzly Bear Tracks You can use this model grizzly bear paw print for realistic footprints for education, learning about animal sign or for pranks. This is designed to make life-like tracks in sand, snow or mud and left and right…
Print approx. €4.62–€5.65 excl. taxPreliminary estimate for one variant
My Best Six Million Dollar Man Plate. Variable layer height also required uses two layers.
Print approx. €7.71–€9.43 excl. taxPreliminary estimate for one variant
A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…
Use case This buckle for a one-inch strap can be used anywhere where you would otherwise use the common strap buckles with the two hocks, that are released by pressing in from both sides. From a functional point of view, my design…
A rugged looking stackable tray to store small items. One of the faces has a dedicated space to stick labels on. Overall dimensions are 18.2 x 15.2 x 3.2 cm. Comes in 2 versions - with or without dividers. If you enjoyed this model, check…
This is a small, sturdy laundry basket—perfect for organizing little things around the house. Whether you use it for laundry, desk clutter, toys, or just as a mini prop, it’s a handy print with a clean, familiar design. Print size: 13.5…
Looking Glass Tray-packing puzzle by Stewart Coffin (STC #184-A) Pack six pieces into an obstructed tray. Looking Glass is one of many tray-packing puzzles by Stewart Coffin. It's somewhat unusual in that the pieces enter through a slit…
Do you have something to hide and is your roommate afraid of spiders? Then use this knob….. Or just because you like such a knob or spiders. To operate you have to grab the spider by the lower body. Original design. The model I used for…
MORE: https://cults3d.com/es/usuarios/DIEGOROLANDO93D
♫ But you've got to Make your own kind of music Sing your own special song ♫ From talented 3D artist Luana Ferreira, aka @3dmvl , OpenFigure3D brings you these exclusive bust statues of the popular Nicholas Cage & Pedro Pascal meme !…
This is an easily 3D printable bird feeder that can be mounted with zip ties from the back or bottom. The overall look was inspired by this model: https://www.printables.com/model/48520-bird-feeder Based on this I made my own version that…
very easy good looking rock
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
So, here's another frontend for the XShot Motorized Piston Pump. Took me about 13 attempts, but the geometry of the frontend should very closely match the front end of the body. The main differences come down to me not really like the…
Can be printed while standing. The eyes and the mouth can be colored in black (or printed in black if your printer can do it).
It's a real-looking Christmas tree!
Printed with the Neptune 3 Pro in black PLA with 2mm layer hight.
Articulated Fidget with eyes that can see thru you! Spooky! ;)
This is a soap holder with a double-bottom design. Water drains from the soap into the lower reservoir, which can be easily emptied when needed. Print settings: material: PLA or PETG (PETG is better for holding water) layer height: 0.2mm
Divided in multiple, easy to print parts.
Simon's cat figure, looking under legs.
Tips for printing: Supports: Yes (tree) Layer height: 0.16mm (optimal) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: No Colors and filament I used (5 Color Version): PLA / Marmor - for the egg PLA /…
A chicken feeder. Designed to make your hens feel like they're (already) in heaven, or at least in broth. Meticulously designed based on Leonardo DaVinci's lost sketches, tested and approved by former NASA engineers. Give your chickens…
It should fit most playing card but if you have thicker tuck case might need to modify the file to your playing card. As i tested with my collection it fit all the standard Bicycle Playing Cards
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
Lillies made for creating stained glass type window hanger. Printed at .3mm with PLA (ignore all the stringing, humidity shot up in Ontario, Canada)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #7 (0.58mm) swap to White for the rest.
Funny Sign - "Many people are too judgemental, I can tell just by looking at them", multi colour wall art print, printed in ZIRO PLA Twinkling Black and Sunlu Matte white PLA. For more funny signs see my (growing) collection of them here…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A fish I made playing around in blender. That's it. It doesn't do anything even by the low standards that fish set. Do what you want with/to it, I won't judge. If you also have terrible taste in fish and decide to print it, I had success…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Stretched it to be as wide as it would be if the grips were assembled with the screen.
First layer depth 0.16mm then 0.08mm for all other layers. Filament: SUNLU PETG BLACK - 1st layer up to and including layer 5. SUNLU PETG GREY - 6th layer up to and including layer 10. SUNLU PETG SKY BLUE - 11th layer up to and including…
2D looking giraffe as a wall decoration. STL in the attachment and in the photos is about 100mm x 76mm. If you need a larger size, just resize in your slicer. You need a piece of double sided tape to attach it to the wall. It can also be…
A realistic-looking house key model designed for multi-purpose use. This key doesn't open anything, but it looks like it could. Perfect as a photography prop when you don’t want to show your real keys in pictures—keep your privacy while…
magnets should be pressure fitting
A simple yet optimized for 3d printing model of strawberry supports. Also available for printing in stacks. PETG is suggested since it can withstand outdoor conditions way better than PLA. Models: Initial release Strawberry support split…
Feel free to scale up or down. Material: R3D - PLA Blue Glow / Azure Film - PLA Silk Sand 1Kg Nozzle: 0.4mm Layerheight : 0.2mm Support: Automatic, or Custom Seam: Yes, draw it to the back of the model Infill: Lightning (for filament…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Hinges Medieval looking 2 sizes DXF for laser cutting 2 sizes and 2 versions Print Settings Printer Brand: Creality Printer: K1 Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Tangled.com PLA Black Notes: Hinges Medieval…
Print in vase mode. I printed with 0.4mm nozzle. Different nozzle sizes will also work but change the appearance slightly. I recommende at least 4 bottom layers for bottom stability. I use prusaslicer, I do not know it it works also with…
These bookends are based on generative design, which lets you make unique organic shapes optimized for strength and mass. I made this symmetrical for aesthetic reasons, and I think it looks rather pretty. It has also been designed not to…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Asian looking lamp inspired by the lamps in Liyue. Separated into parts for easy printing. Update: resized
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used: Devil Design PLA Black Devil Design PLA Dark Gray Devil Design PLA Beige Devil Design PLA Gray Devil Design PLA White Printing instructions:…
I wanted simple press/push-wallmount for everything on my dyson v6, which also looks nice and elegant, and uses as less material as possible. So i came up with this 3 designs. I always used the most simple form or diameter i could find,…
i remixed this model so there is an window in it . you can cut an piece of acrylic or use the print glass methode. measurements are 120 mm x 120 mm use acrylic and otherwise print it yourself…
I didn't make this design intentionally but I really like it so I'll give it to you. But i intentionally made it so you'll be able to print it withou supports. Just make sure, that the overhang is printed at 45 degree so they are shorter.
I wanted to make a sci-fi looking coaster since I hadn't seen one on here so in case someone, somewhere had the exact same thought I did, which is “my drinks would taste so much better resting on an over-the-top, over-designed coaster…”,…
Start with White, then Grey, last go Black. 3 colors/ 2 changes total. Banksy Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/359901 Link to all multicolor art:…
Cozy looking bird feeder with semi-transparent back wall and windows. Link to the onshape file:…
Asian looking lamp inspired by the lamps in Liyue. Separated into multiple parts for easy printing with few supports. Update: resized
Side pods, bushing for the club racer hero plus and modified rear and top pods from Simon Britton with some added fastener clearance. I printed this on my Bambu Lab with the 0.4mm nozzle and it came out great. Used a high temp material…
This is a little edit I did to a good and working battery holder by jgillick. All I did was cover the front and added the letters "AA". Hope you enjoy this remix! Print Settings Printer: 3DWOX Rafts: Yes Supports: No Notes: Works fine to…
It's a happy kitten with a big smile, that is standing on the tree stump and reaching out with its front paws for a hug. Very detailed figurine with supports that are easy to remove. Supports are easy to remove. The whole print takes…
Monkey looking away meme Bookmark the Size : 80 x 45 x 1 mm Please share your opinion and feedback for the design :) I hope you like the design and you can visit my profile for more designs
Introduction: Hi!! This is my second model, which I have made by myself😁. This is a demonic goofy-looking dragonfly that rotates its wing with air current. It can be planted on gardens, rooftop or inside home. Dragonflies are known to…
For printing the magnet frog you need to slice the 3mf file with prusa slicer. A 10x3 mm round magnet fits here. The ChubbyFrog is an easy print
March 2023 update: I retrofitted the design of my bigger bulb phone stand to this smaller version by adding a bottom to the slots to improve stability. Also I made the top part of the screw straight (again for better stability).…
When Zedaph and crew released the game "Is That Sheep Looking At Me?" and made a printable version available, I decided I needed a 3D printed token to go with it. So with their permission, I present my version of the coin! The token is…
Another lamp inspired by the game Genshin Impact. This one has a hole for a wire or similar, so the top will “float” in the air above. If you print it at original scale, the hole will fit a wire with a diameter of 1 mm - this is what most…
A Godzilla looking Dragon Medallion about 7 inch round and half inch tall with details at about 1/4 inch The model embossing is in sections of 6mm 6mm solid round base 6mm Dragon design 205mm round (This can of course be scaled) I've had…
Also suitable for bigger and heavier phones, I use it with an iphone 13 pro max. Printed with Prusament PLA Galaxy Black.
Easy to print and assemble, good looking filament rack using 10mm aluminium pipe
This is a 1 by 1 by 2 gridfinity holder for an eyepiece.
A small vintage looking TV wall shelf. Category: Art
Vintage Looking Alarm Clock using Quartz movement movement: https:// amzn.to/3R4ioHD
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 235.99x147.86mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.6mm and the Actual Depth is 2.7mm…
Print and scale as desired. Drucken und Skalieren nach belieben.
Do not print AND I MEAN IT
Drucken und Skalieren nach belieben. Print and scale as desired.
Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license: Patreon Portfolio at https://marjers.com/ Tools I use: Acrylic paint pens for painted models, blade cutters for…
Shoutout to MilSpec Aviation for inspiring me with their “Bambulab P1S Poop Chute”. Not marked as a remix because I made mine from scratch and the models are quite different. My Bambu P1S printer is tucked tightly in the corner of my…
In the GDR and the USSR, a children’s building set called Grossblock was quite popular. It was produced from 1970 to 1989 by the factory VEB Plastspielwaren (Plaspi) in the town of Waltershausen, Thuringia , GDR. Today, it’s hard to find…
Looking Toward Heaven is the second model in the Eternal Grace Collection , a series of religious busts inspired by faith, hope and devotion. This detailed bust portrays Jesus raising His gaze toward heaven, capturing a powerful moment of…
Print settings: infill: As you want (doesn't matter) layer height: 0.2 mm supports: No Enjoy your futuristic looking printer 😎 PLEASE GIVE IT A LIKE! 👍
DIY Fume Extractor – Efficient Design for Makers and Tinkerers This DIY fume extractor is designed to handle fumes and smoke from soldering and other small-scale projects. While it’s not the most compact unit, its optimized design ensures…
This is a cool looking dragon. it will need a lot of support but it looks cool
I wanted to put MMU3 on my CORE One and I used model from dancan13f , but because of my space I needed the MMU3 to have the input PTFE tubes from top, so I have created opposite angle, than is the original. You need to print at least the…
45RPM with standard dimensions (0.75in tall though to show off the design). Print according to your regular print parameters, any infill above 10% should be fine. Most printers should be able to print all of them at once, one at a time.
This is a wierd looking car I made while learning fusion 360
I DIDN'T MEAN TO PUSH ALL YOUR BUTTONS. I WAS LOOKING FOR MUTE. SIGN Category: Signs & Logos
Etsy Premium Designs & Bundles & Commercial License : https://mayy3d.etsy.com Commercial License and STL Membership : https://than.gs/u/7138811 Capture an attentive moment in nature with this raven looking up STL. A raised head,…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 180x180mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
I created this design, which is a toothbrush holder in the shape of a human tooth. The design is simple, and I made each piece separately to be printed in the colors of your choice. Check my Patreon to get my latest project:…
printed all with cura res-0.2mm infill-50% no-supports
Cute Pumpkin Emoji Keychain to carry with you during Halloween!
This is a selection of camera pods for the Sine qua non that can be fitted to the fuselage in the mold of (and thus instead of) the back access cover, so they can arbitrarily be attached, detached, and exchanged in less than a minute. The…
After several iterations and testing, this is the one that worked best for me.
I wanted to put my Looking Glass: Portrait on a riser on my desk so it is nearer eye level, but this ruined the illusion a bit, so I designed and printed this angled base (using the 17.5* version for my application). Fits to the bottom of…
Capture elegance in motion with this stunning 3D printable figurine that brings graceful beauty to any space. This meticulously crafted STL model showcases a woman in a captivating pose, glancing back over her shoulder with flowing hair…
My wife wanted a tree topper that looked something like this: Print two of everything and superglue. For each gem, print the file twice and superglue together.
Project: Hot Springs AR 2 Looking up tree Hueforge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 173x230.67mm in size You may print at higher layer heights below the Min Depth of 0.48mm…
First of all, the default size is really small, and assembly can be infuriating. If you care about that, feel free to upscale to 150% or even 200%; the model will still work. There are three pipe sizes to be used. As seen in the photos,…
![Rugged (looking) Stackable Tray [2 versions available]](https://media.printables.com/media/prints/0ceb978a-83bd-4818-88db-4713d60f1e8c/images/13603041_a4560b7c-742f-4671-b3a5-dee4025cb89a_e346db02-35cc-4b65-a329-5d85f4eed984/stackable-tray-poster-1.jpg)
![DragonFly Windmill [Lesser goofy-looking Demon Windmill]](https://media.printables.com/media/prints/972041/images/7416572_5069d820-e5d0-46de-8807-b96b6397be3d_f7e510a6-428c-48e6-80e7-e758fc54da91/img20240812135004.jpg)
