Search results: losc

Sort order

211 models

P
Printablesxiphmont

Replacement Feet/Pads for Tektronix TDS 500/600/700 series oscilloscopes

Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…

Downloads
127
Likes
4
Rating
4
P
Printablescmpxchg

Oscilloscope probe tweezer 4mm

One-handed differential probe for two-channel oscilloscope with math function. With dual acupunture-needle handle holes for alternative or additional pins pointing to same probe tips center location. With adjustment screw, M3 hex nuts and…

Downloads
115
Likes
35
Rating
5
P
Printablesballes

DS212 oscilloscope stand

A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…

Downloads
23
Likes
8
Rating
0
P
PrintablesSica

Hantek oscilloscope feet extender

The Hantek oscilloscope has rahter short front feet. I intended in putting a tray over it and the oscilloscope might have tipped over and fell. So this extensions for front feet are designed to stop any front swing. The feet are different…

Downloads
22
Likes
8
Rating
0
P
Printablesthree-spot

oscilloscope probe holder

oscilloscope probe holder Double sided tape is required for fix.

Downloads
496
Likes
70
Rating
4.86
P
PrintablesLyrkan

Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter

This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…

Downloads
432
Likes
83
Rating
5
P
Printablesv3li

Oscilloscope FSCOPE-500K & DSO-500K

Krabička pro osciloskop FSCOPE-500K a DSO-500K https://oscilloscope.fhdm.xyz/

Downloads
314
Likes
19
Rating
5
P
PrintablesBrien

Oscilloscope Probe Holder

I have a 4 channel Oscilloscope and this helps me keep them out of the way. I print multiples of them and mount them side by side so I can hang multiple probes, hats, etc…

Downloads
270
Likes
35
Rating
5

DS213 Oscilloscope Rugged Box (+ Stand)

I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…

Downloads
257
Likes
59
Rating
5
P
Printablesdoragasu

Stackable Gridfinity Holder for Rigol PVP2150 Oscilloscope Probe

I have uploaded Revision 2. The first model is the yellow one in the photographs. Revision 2 is the red one in the photographs. It has additional structures to place the oscilloscope probe tools.

Downloads
234
Likes
44
Rating
4.88
P
Printablesarminth

Cover for ZOYI (ZOTEK) ZT-703S Oscilloscope ports

Not much to say else. Just print it no supports needed in any filament type you like. Choose between text and no text version. OpenSCAD File included as ususal. Have fun!

Downloads
222
Likes
29
Rating
5
P
PrintablesKlave

Clips to hold oscilloscope probes to side of scope

To hold my scope probes so they don't clutter my workspace I made a clip that fits to the left-hand side of my Hantek DSO2D15 oscilloscope. Can be used for other scopes too, it fits the Hantek's PP150B probe and the P6100 probes commonly…

Downloads
216
Likes
27
Rating
5
P
PrintablesSimon

Cover plate for KORG Nu:Tekt NTS-2 Oscilloscope

The oscilloscope is well made, but the screen is not well protected, being surface mounted on top of the unit. Bigger buttons are also nicer to press. You can fit a thin screen protector under the bezel for additional protection (I used…

Downloads
215
Likes
23
Rating
0
P
Printablesskarfacegc

Gridfinity Test Lead / Oscilloscope Probe stand

Enough room to hold two pairs of oscilloscope probes or larger test leads / multimeter leads. The two smaller holes hold smaller clips or test leads. Turned out better than I was expecting. Have been looking for a solution other than a…

Downloads
207
Likes
31
Rating
5
P
PrintablesRod

Rigol Oscilloscope Cover

A travel cover for Rigol DHO8xx series of oscilloscopes. Designed-in support allow printing on any printer with a build volume ≥ 250mm x 250mm x 210mm, i.e. MK3S, Bambu X1C, P1S, etc. Many thanks to Slant 3D for the support tip that…

Downloads
205
Likes
18
Rating
4.5
P
Printablessuromark

Enclosure for DSO138 digital oscilloscope

An enclosure for the DSO138 oscilloscope with room for a 9V battery. Print Settings Printer: TronXY X5S Rafts: No Supports: Yes Resolution: 0.25 Infill: 15% Filament: Generic PLA Any Category: Electronics

Downloads
185
Likes
19
Rating
4.8
P
Printablesuwezi

Loschenturm Bremerhaven

Dieser Leuchtturm ist eines der Wahrzeichen von Bremerhaven. Er steht auf dem Willy-Der Leuchtturm Bremerhaven (auch Alter Leuchtturm, Großer Leuchtturm, Simon-Loschen-Leuchtturm oder Loschenturm) steht als Bremerhaven Oberfeuer am Neuen…

Downloads
181
Likes
16
Rating
0
P
Printablesjonnybergdahl

Oscilloscope Probe Holders

This is a holder for oscilloscope probes. I have them screwed to a shelf above my workplace. Fusion360 design file included for easy remixing.

Downloads
180
Likes
16
Rating
5
P
PrintablesNullSense

Rigol DHO800 Oscilloscope Probe Holder

This custom-designed probe holder is made specifically for my Rigol DHO804 oscilloscope. It should work with any DHO800 series scope and possibly DHO900 series (need to verify). It provides a secure and convenient storage solution for…

Downloads
172
Likes
14
Rating
0
P
Printablesthree-spot

oscilloscope probe clip holder

oscilloscope probe clip holder

Downloads
158
Likes
31
Rating
5
P
PrintablesStefan

DSO154Pro oscilloscope case

This is a case to cover the sides and back of the Zeeweii DSO154Pro portable oscilloscope. It's meant to be pressure-fit, so you may need to adjust dimensions by 0.1 or 0.2mm depending on your printer's tolerances. There's also a small…

Downloads
155
Likes
15
Rating
5
P
PrintablesKyleTW

Oscilloscope Probe Holder Clips

These probe holders are deisgned to hold oscilloscope probes in place for debugging and testing. Use with 1/4oz adhesive wheel weights to help keep them stable along with 9mm OD rubber bumpers. The source design files for SOLIDWORKS and…

Downloads
149
Likes
37
Rating
5
P
PrintablesMarcin

DSO152 FNIRSI oscilloscope box (120x200)

Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…

Downloads
148
Likes
31
Rating
5
P
PrintablesDerKipo

Scoppy Oscilloscope Casing

Takes a raspberry pi pico on a breadboard (the standard small size ones, 35x45x10mm) in the back, standard 6mm banana-plugs in the front, and a phone up to 13 mm thick.

Downloads
145
Likes
11
Rating
0
P
PrintableschiptronCZ

Oscilloscope probe holder / Držák osciloskopických sond

Several models of oscilloscope probe holders. Version for gluing or screwing and the height of the holder is 12mm. The holder is designed for probes with a diameter of 10mm. ---------------------------- Několik modelů držáků…

Downloads
143
Likes
12
Rating
4

Lille Olympique Sporting Club (LOSC) coaster or plaque

"Lille" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till 6mm Blue 6.2 - 6.4 White 6.6 - end

Downloads
133
Likes
9
Rating
5
P
PrintablesVladimír Waas

Case for Osciloscope Scoopy (board DSO/FSCOPE-500K)

Case for Osciloscope with support for Mobile or Tablet

Downloads
132
Likes
17
Rating
0
P
PrintablesBubble O Bill

FNIRSI 1013D Oscilloscope Cover

Front screen cover for the FNIRSI 1013D Oscilloscope to protect the touch screen while in your backpack or tool bag. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 15 Filament: PolyMaker PLA Notes:…

Downloads
126
Likes
12
Rating
0
P
Printablesken830

Rigol MSO5000 Series Oscilloscope VESA Mount

This is a VESA mount adapter for the Rigol MSO5000 series Oscilloscope. Mounting the scope above your work surface increases flexibility, frees up space, and puts the scope at eye-level. Tool-less mounting of the oscilloscope,…

Downloads
125
Likes
22
Rating
5
P
Printablesseanmurf

FNIRSI oscilloscope case (138-pro)

This case attaches with slightly longer bolts in the rear of the oscilloscope. Keeps all pcb layers, just added to rear and provides side covering. Much easier to use and hold now.

Downloads
120
Likes
5
Rating
5
P
PrintablesKarlos

Knob for Rigol oscilloscope

Replacement knob for broken one on Rigol oscilloscope. 6mm shaft. Printed in white filament PM. Print instructions: Layer height 0,1mm, no supports.

Downloads
119
Likes
5
Rating
0
P
PrintablesUilHurtUrself

Tektronix TDS Oscilloscope Feet

Printed in standard PLA with low layer height (0.8mm height took 1 hour) and 55% infill. Tight fit. Print two so they match!

Downloads
118
Likes
4
Rating
0
P
PrintablesEXON

Standard Australian Pallet (CHEP/LOSCAM)

Just a standard 1165 x 1165 x 150mm Australian pallet. Import into your favorite slicer and then reduce the model size. 5% works perfectly if you are printing a pallet for your Bunnings/Hammerbarn forklift model. Printed pretty well on a…

Downloads
113
Likes
8
Rating
5
P
PrintablesRené

Katzenkloschaufel

Eine Schaufel für das Katzenklo. Mit stützen und 0,2layer

Downloads
110
Likes
4
Rating
4.5
P
Printablesgadjet

Rigol Oscilloscope DHo 800/900 series rear fan mount

I have a Rigol DHO914 Oscilloscope and I find the fan noise annoying so I designed a rear mounted adapter to mount a larger fan, using the VESA mount screws on the rear of the scope. I used a Noctua slim (15mm) 92mm fan NF-A9x14 PWM but…

Downloads
106
Likes
9
Rating
0
P
Printablesthree-spot

Helping hands oscilloscope probes

Helping hands oscilloscope probes REGOL PVP3150 Probe Two AA batteries are used as weights

Downloads
106
Likes
29
Rating
5
P
Printablesnu dota

Tektronix oscilloscope knobs and button

A set of 3D models of knobs and buttons for the Tektronix TDS210 oscilloscope . Also may be suitable for other Tektronix oscilloscope models. The set includes: Tektronix knob mini – small knob; Tektronix knob – large knob; Tektronix…

Downloads
105
Likes
5
Rating
0
P
Printablesbogdankecman

Probe holder for your oscilloscope

The adaptation of previous script. The ends can now be made stronger and you can rotate the object so when printed on a side you get much more strength to hold the tools. Instructions print attach use enjoy :) (after printing this type of…

Downloads
103
Likes
6
Rating
5
P
Printableschuyskywalker

DSO152 Oscilloscope Case

Picked up a DSO152 Oscilloscope and it came in a box; here's a nice way to keep it. This one is large enough to hold the “deluxe” version with the nicer probe, so if you skipped that, you could probably shrink this down quite a bit. You…

Downloads
103
Likes
9
Rating
5
P
PrintablesMegaCadler

Case stand for DSO138 Oscilloscope with 9V battery

I updated the back of the Scope stand to include a 9V battery. The front part comes from https://www.thingiverse.com/thing:959009 Category: Electronics

Downloads
96
Likes
6
Rating
5
P
PrintablesSteveW91

Wall holder for Zoyi ZT-702S Multimeter Oscilloscope

A remix of mbmelectronic's model that can be fixed to a wall with screws through the holes

Downloads
96
Likes
8
Rating
5
P

Oscilloscope Knob - Tek

I cracked a knob on my old Tek TDS220 scope so I made this. It is a tight fit. It might work on yours too. Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.1 Infill: 11 Category: Electronics

Downloads
95
Likes
7
Rating
0
P
PrintablesMark Harris

Digital Multimeter/Oscilloscope Probe Holder for 2020 Extrusion

This versatile 3D printed model is designed to securely hold your oscilloscope or multimeter probes, offering a practical solution for wire management and easy accessibility. The multimeter probe holder boasts a universal design, ensuring…

Downloads
94
Likes
20
Rating
0
P
PrintablesHenry

Oscilloscope Probe Box - MMU

For all your messy o-scope storage needs! Internal dimensions of the box are 125 x 200 x 80mm (box = 50, lid = 30). For assembly, you'll need M3 screws. Four M3x30mm (hinges and latches) and two M3x35 (latch catch/handle) Three lids are…

Downloads
93
Likes
28
Rating
5
P
Printablesseed49

Fnirsi DSO-TC2 or DSO-TC3 Gridfinity 3x3 Box Mini Digital Oscilloscope Transistor tester

Gridfinity box for Fnirsi DSO-TC2/TC3 Mini Digital Oscilloscope 2 Storage for USB-C Cable / 3x test Hook / crocodile clip 1 Storage for BNC adapter Gridfinity 3x3 size

Downloads
91
Likes
16
Rating
5
P
PrintablesTomatendose

Probe holder for VESA Oscilloscope

I have created a holder for four measuring tips. These can be attached to the VESA screw points of the oscilloscope. The negative of the probes is adapted for Rigol DHO probes. It is suitable for VESA 100x100 mm You need 2x M4 threaded…

Downloads
90
Likes
13
Rating
5
P
PrintablesMike

Oscilloscope probe organizer - smaller version

I like the original design, but it was too wide for my compact size oscilloscope and I had not enough desk space for it. So I came up with this version. It has a footprint of 324x200mm and is intended to be used with smaller oscilloscopes…

Downloads
79
Likes
13
Rating
0
P
PrintablesDr. Kropp

Rigol DHO800/900 Oscilloscope Stand with Probe Storage

This stand is a pair of parts (right and left) that snap into place on the bottom of the DHO800/900 oscilloscope to raise it about 4 inches and tip it back to make it easier to view. No screws or spacers needed, it clips firmly into place…

Downloads
79
Likes
23
Rating
4.67
P
PrintablesDmytro

FNIRSI DPOX180H Oscilloscope Rugged Box

This inserts should be use with Rugged Box Parametric V2 model made by @Whity You will need the original packaging to use it as an oscilloscope holder in the box. Rugged Box Parametric V2 parameters: InnerBoxDepth 185 mm InnerBoxWidth…

Downloads
78
Likes
5
Rating
5
P
Printablesqu4k3

(Remix) Case for Osciloscope Scoppy (board DSO/FSCOPE-500K)

Remix of Case for Osciloscope Scoppy from VladimirWaas_694872 This case accommodates the DSO/FSCOPE-500K boards from FHDM. The boards are based on the Raspberry Pi Pico and function as front-end for the Scoppy Oscilloscope firmware, which…

Downloads
75
Likes
5
Rating
0
P
Printablesblmak

Rigol 1054 oscilloscope probe tray

This probe tray is designed to store the probes of the Rigol 1054Z, Just because I didn't like the bags provided. The trays are stackable and comes with a lit for the one on the top. Category: Tool Holders & Boxes

Downloads
69
Likes
13
Rating
4
P
Printablesfaultedlogic

Tektronix 2225 Oscilloscope control knob

I bought my Tektronix 50 MHz scope used a few years back. It came missing the control knob for trigger level. I would frequently swap the "holdoff" knob, located directly below it, until one day, one of the two prongs seating the knob…

Downloads
67
Likes
2
Rating
0
P
Printables7FM

Hantek Oscilloscope Probe Mounts

Finally a proper way of storing my hantek oscilloscope with its probes. No support needed :) Category: Electronics

Downloads
65
Likes
8
Rating
0
P
PrintablesS-T-O-N-E

Humidor for cigarello box | Humidor für Zigarelloschachtel

Dies ist ein kleiner Humidor, der in eine Zigarelloschachtel passt. Gefüllt wird der Humidor mit Befeuchterkristallen aus Acrylpolymere, diese findet ihr bei den bekannten Onlinehändlern. Neue Version! Dank der Inspiration von hpolack die…

Downloads
64
Likes
9
Rating
5
P
PrintablesDuck

Oscilloscope Probe to Wire Adapter for Rigol

Oscilloscope probe to wire adapter For Rigol probes (PVP2150, DS1054Z) This allows for a soldered probe connection with minimized lead inductance. Heavily inspired by https://www.thingiverse.com/thing:4935122 Oscilloscope Probe to Wire…

Downloads
64
Likes
12
Rating
0
P
PrintablesFloppy Lab

Oscilloscope probe holder

Oscilloscope probe holder V1 This oscilloscope probe holder is great for keeping all laboratory probes organised. More than one type of mounting is available: Mounting via M4 countersunk head screw U-profile bar mounting Hook version: A…

Downloads
64
Likes
11
Rating
5
P
Printablesoverflo

Oscilloscobe probe mount

I made a snap-in mount for our 4 probe rigol 1074Z It works very well. OpenSCAD source is also available here. Enjoy :* Category: Electronics

Downloads
63
Likes
8
Rating
5
P
PrintablesMiaoucat

Coaxial Attenuator Box , coax BNC Ham radio DPDT DTDP switch oscilloscope fox hunting RDF spectrum attenuators analyzer

[Simple Attenuator Box] with 5 stage, for BNC connectors very useful for Osciloscope, Fox Hunting, Audio Tweaking/Freaking, Ham Radio… i plan on using Dymo tape on the face to mark the attenuation values. Material: 2X BNC connector 5X set…

Downloads
59
Likes
17
Rating
0
P
PrintablesAB27

PCBite SQxx0 oscilloscope probe insert

This is a remix of @uSD_cardlord_2322350's inserts for the SQ10 probes, so that you can also store the similar oscilloscope probes in a rugged box. The remix is a bit quick and dirty in terms of details, as I didn't have much time. But…

Downloads
57
Likes
10
Rating
5
P
PrintablesGerryPB

Oscilloscope Probe Tray

I designed this tray to nicely store my Hameg Oscilloscope Probes. It will likely work with many makes of probes or you can modify it with the included fusion 360 file. It is stackable. You can experiment with different printer settings…

Downloads
56
Likes
11
Rating
5
P
PrintablesRuddO

Zoji ZT0375 oscilloscope / multimeter holder for Gridfinity

I made a Gridfinity-based holder for the popular and cheap Zoji oscilloscope. A few other accessories are supplied in the 3MF and FCStd files as well. With magnets on both the holder and the base, the device stays firmly in place and is…

Downloads
53
Likes
11
Rating
0
P
Printablesgrbgrb

Foot for rigol DS1000Z series oscilloscopes

Replacement foot for Rigol DS1000Z series oscilloscopes (ds1054z, ds1074z, ds1104z). The angles, dimensions and the flappy action are similar enough to the original feet, so you can just replace one of them. I also used a 2mm steel axle…

Downloads
52
Likes
3
Rating
0
P
Printablesgadjet

3 port USB hub for Rigol DHO800/900 series Oscilloscopes

******* PCB for USB A plug temporarily removed due to an error ******* This is an enclosure for a 3 port USB extension hub to fit to a RIGOL DHO800/900 series Oscilloscope allowing three devices to be used with the single USB port whilst…

Downloads
50
Likes
13
Rating
0
P
PrintablesTatiana Ivanov

Tektronix 2230 oscilloscope front cover

Tektronix 2230 oscilloscope front cover Snap on front cover for Tektronix 2230 oscilloscope. Printed in two halves plus clips and connector for glue. Based on an ebay listing for an authentic front cover, this should fit models: 2213,…

Downloads
49
Likes
2
Rating
5
P
PrintablesIra S

Case for Sainsmart DSO138 Oscilloscope Board

This is a case for the Sainsmart DSO138 Digital Storage Oscilloscope board. All switches are accessible. The range slider switches have extenders on the left. Function push buttons on the right are molded into the case. Probe and power…

Downloads
48
Likes
5
Rating
0
P
PrintablesWooddab

Stand for Zoyi ZT-703S Oscilloscope/Multimeter

This is a simple replacement stand for the Zoyi/Zotec ZT-703S. It may work with the ZT-702 as well but I don't have one to test with. I print it standing vertically with the top hinge side on the heatbed but you may find another…

Downloads
48
Likes
5
Rating
5
P
PrintablesMalik Ruziev

Fan Mount Adapter for Rigol DHO800 Oscilloscope (92mm Be Quiet! Fan)

The adapter helps improve airflow and device cooling under prolonged use or high ambient temperature. Designed to be installed without modifying the oscilloscope — it uses existing screw points and aligns with the stock vent grid. Fan…

Downloads
48
Likes
1
Rating
0
P
PrintablesBigKingLui

Katzenkloschaufel

Schaufel für Katzentoilette

Downloads
48
Likes
0
Rating
0
P
Printables3Dpetr_kolos

Skadis osciloscope holder

Simple UNI-T osciloscope holder for Ikea skadis. https://x.com/3Dpetr_kolos

Downloads
48
Likes
16
Rating
5
P
PrintablesAeraCura

10x lock for Oscilloscope probe

Locks the probe in the 10x position saving the headache of having to constantly check.

Downloads
47
Likes
12
Rating
5
P
Printables2wenty2wo

Multiboard - Multiconnect Mount for Zoyi ZT-702S / Xeast XE-702S Multimeter Oscilloscope

This will mount a Zoyi ZT-702S or Xeast XE-702S (same product just different branding) to Multiboard using Multiconnect. You will need to print the Multiconnect connectors here:…

Downloads
46
Likes
5
Rating
0
P
PrintablesOlloG

BNC Caps for ZT-703S Oscilloscope Multimeter

No Support…just print it :-) Two alternatives… use what you like.

Downloads
46
Likes
5
Rating
0
P
PrintablesUser0180

Rigol RM-DS1000Z Oscilloscope Probe Holder

These are probe holders for Rigol RM-DS1000Z rack kit. 4x M4x12 or M4x14 countersunk screws are needed for mounting. Designed for RP2200 probes.

Downloads
45
Likes
7
Rating
4
P
Printablesmetacollin

1:6 Barbie Scale Oscilloscope

Intended for resin printers. Barbie scale oscilloscope with sine wave on the screen. Category: Toy & Game Accessories

Downloads
45
Likes
10
Rating
0
P
PrintablesAeraCura

DS1104 Oscilloscope probe color band

O'scope came with 4 color bands, none of which matched the dark-blue of channel 4.

Downloads
44
Likes
6
Rating
5
P
PrintablesFipsthedog

HP Oscilloscope Feet - Designed for Analog Oscilloscope 1740A

print two of each. Includes recess for the power cord.

Downloads
44
Likes
4
Rating
5
P
PrintablesPedja

DS212/DSO212/DSO202 Oscilloscope Mini Stand

Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…

Downloads
44
Likes
3
Rating
0
P
Printables1g0rb

Rigol MSO1074 oscilloscope rack mount

Rack mount for the Rigol MSO1074Z oscilloscope - should fit other models from 1000Z series too like DS1xxx, MSO1xxx (check your model's dimensions). Official rack mount kit is quite expensive (around 250€) so I made this one. It also…

Downloads
44
Likes
7
Rating
0
P
PrintablesDamianB2

Oscilloscope Probe to Wire Adapter

Sometimes, when using an oscilloscope, it is desirable to be able to get the probe attached to the PCB. This may be to lower the loop inductance of the ground lead or just because the probe is difficult to hold in place. This adapter…

Downloads
43
Likes
11
Rating
5
P
PrintablesBri's Prints

Case for DSO138 Pocket Oscilloscope

Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.

Downloads
43
Likes
2
Rating
0
P
PrintablesAmitesh Singh

Oscilloscope BNC connector Cover

Oscilloscope BNC Connector cover Protect Oscilloscope BNC connectors from rusting/environmental factors

Downloads
42
Likes
7
Rating
0
P
PrintablesRossosaurus

DSO150 Oscilloscope LiPo Battery Case

The DSO150 is a great small form factor oscilloscope marketed as being portable. This would be great except for one thing. Most versions are sold with no battery and require you to use an external 9V. In my experience your average 9V…

Downloads
42
Likes
4
Rating
0
P
PrintablesSoulWager

Oscilloscope probe holder and tray

Clip version needs to be printed on back, with support material for the wire rack. May need to resize clip depending on the thickness of whatever you're clipping it to. Currently sized for a 12mm or ½" thick shelf. Other versions can be…

Downloads
42
Likes
4
Rating
5
P
Printablesgdavies

4 Channel Oscilloscope Probe holder- 3x 12mm, 1x 9mm

Remix of 4 channel oscilloscope probe holder. I needed to hold 1x 9mm probe as well as 12mm probes, so I made the last one smaller. I also made a flat base so you can sandwich between the oscilloscope and the shelf. Category: Electronics

Downloads
41
Likes
7
Rating
5
P
PrintablesNupsDesigns

Oscilloscope Probe Tip Cover

OpenSCAD implementation of parametric tip cover for scope probes. This is an accessory usually bundled with probes, but they're tiny and prone to be lost and, above all and in my experience, they have a section with larger diameter than…

Downloads
39
Likes
14
Rating
0
P
Printablesbogdankecman

Probe holder for your oscilloscope

Simple parametric object that can be used as a probe holder. Parameters to the module are number of probes to hold (4 probes by default) height of the holder (20mm by default) Instructions Print screw or glue use Category: Other

Downloads
39
Likes
4
Rating
0
P
Printables3dloh

DSO154 pro oscilloscope case with magnets

No special printing options. This case is a kind of slide on cover case without snapping. So if you print it it could be snug fit togehter or need glue at some points. I have put the freecad file online, so you can remix the model for…

Downloads
37
Likes
2
Rating
5
P
PrintablesMiaoucat

BNC switch antenna oscilloscope coax HAM radio box

better pictures coming later. this is a simple box that has 3 BNC in the back and a single ON/ON double switch in the front. very useful for all kinds of application! from antenna testing to plugging multiple things onto your…

Downloads
35
Likes
6
Rating
0
P
PrintablesMegaCadler

Stand for DSO shell Oscilloscope with 9V battery

Stand for comfortable use if the DIY Scope shell. Includes hole for 9V battery. There are 2 versions: In DSO-ScopeStand2.stl you push the connector of the 9V battery through the hole. If your connector is too big for the hole then use…

Downloads
34
Likes
3
Rating
0
P
PrintablesPablo Fernandez

FNIRSI-1014D Osciloscope French Cleat Holder

This model is pretty big. The french cleat part is a separate body that needs to be screwed into the main body, so it's at least two parts. But since those parts are very long, I included both versions, one being a single body, and one…

Downloads
32
Likes
3
Rating
0
P
PrintablesHKOCH

Rigol Oscilloscope Shelf Bracket

This system helps keep the Rigol Oscilloscope in place on the shelf when you either touch buttons or attach/detach the oscilloscope probes You need to print: A: 2xRigol frame B: 2xFrame_stopper C: 1xArm_NEW D: 1xBack suspender Screews…

Downloads
32
Likes
3
Rating
0
P
PrintablesEasy Target

DSO138 Oscilloscope stable stand and probe rack

A stand for the DSO138 oscilloscope with the (standard?) acrylic case. Heavy enough that it does not slide around the worktop as you connect it up ;-). I also incorporated some storage for probes etc. All the ports and connections are…

Downloads
31
Likes
6
Rating
0

DSO152 FNIRSI oscilloscope box Latch Remix

Loved the original model, but the latches were too tall for the box. It looked like others had this issue, as well. Rather than having everyone have to solve this on their own, I just made one for the masses. I shortened them up a little.…

Downloads
31
Likes
4
Rating
0
P

Skadis Holder for Hantek 2D42 Oscilloscope

This design allows you to get stuff (oscilloscope) off your bench and on your Skadis board where it belongs. This has hex holes to help save some filament. It may also fit other similar models as well. Make sure to check the measurements…

Downloads
30
Likes
4
Rating
0
P
Printablesmhwlng

4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes

4.3U 19 inch rack front panel mount for Rigol DHO800/DHO900 oscilloscopes These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 4.3U apart. Print the two halves of the front panel…

Downloads
29
Likes
14
Rating
0
P
PrintablesAeraCura

DS1104 Oscilloscope AUTO button cover

Got tired of accidently pressing the AUTO button and decided to do something about it.

Downloads
29
Likes
10
Rating
5
P
PrintablesThomCraft3D

Porte clé du LOSC

Porte clé du logo original du club de foot de Lille, le LOSC.

Downloads
28
Likes
1
Rating
0
P
PrintablesJDP

Rear feet for Tektronix 468 oscilloscope

This is the first file I have ever shared. Just replacement feet for a tektronix model 468 oscilloscope manufactured from 1980 to 1985. I increased layers and added fill to add strength. I hope someone finds this useful. Any tips from…

Downloads
28
Likes
1
Rating
5
P
PrintablesMicrocarpentry

Eurorack rail clip for oscilloscope

Clip to hold the inexpensive FNIRSI-138 oscilloscope to a Eurorack rail. I use a 3D-printed 42HP rail I designed.

Downloads
28
Likes
5
Rating
0
P
PrintablesDanielBog

Oscilloscope Wireframe Art

A dimensionally accurate model of a DSOX1204G Keysight oscilloscope with a minimalist frame. Warning! The lines are very thin in some cases, and you may need to play with your feature size settings for them to print. Ideally I'll come…

Downloads
28
Likes
17
Rating
0