Low Poly Cat 2.0 (Decoration) (No Supports!)
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
- Downloads
- 48,117
- Likes
- 8,450
- Rating
- 4.92
30,337 models
Nice improvement on my previous low poly cat model. Made in Blender. Commercial Use: https://cults3d.com/:1308071 $1 Donation: https://cults3d.com/:1308029
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
A low poly model for 3D-printing of Rodin's Le Poète , The poet in English, and commonly know as The Thinker . Print instructions All three models somewhat complicated prints but the easy to print one uses bridges for the worst overhangs,…
This is a book stand for your library that makes it look like Yoda is holding your books using the Force. Since the models are separate and the pin holding the character in place is on the book stand part, you can also just print the Yoda…
Ghost Emoji Decorations! I hope you all have a spooky yet happy Halloween this year with these super cool Emoji Ghosts! Version 4 - 24/09/2023: Updated STL Files released. Added a thicker base for each 'foot' of the models, making it much…
I made this twist vase with OpenSCAD with the intention of making something that would reflect light from many angles while being rotated. It's an octagon that's been linearly extruded upwards with a bit of rotation every few millimeters.…
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
A low poly remix of McGybeer's Cute Mini Octopus, one of the best articulated designs that exists. This model can be printed without any supports, although you may want to use a brim if you don't have very good bed adhesion. Like this…
Halloween Mini Monster Trap >:D Print Recommendation: Material: PLA, PETG Infill: Grid Infill → claw holder (100%), all other parts (20%) Perimeters: 4 Perimeters Supports: No supports → With the exception of the plate! (Support on build…
This is a digital 3D printable model of Hornet’s Needle from the Hollow Knight Silksong video game. Designed as a human-sized cosplay prop! 😁 Features 2 versions - smooth and textured. 📦 Included Files STL (cut for 200mm printer beds) STL…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Advancent error planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :) Higher Poly by Noah1794:…
This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I…
This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
A very nice and modern indoor or outdoor flower/plant pot - easy to print in 2 or 3 layer vase mode. Your plants will love it! Happy printing! :)
Description: I loved the cat ghost that ncsandor made, so remixed it with a hollow body that should be big enough for a tealight. I also created a channel on the side to fit the wires for other lights. Printing: I printed my example with…
https://www.buymeacoffee.com/maxt ---------------------- ONE SERIES, ONE FAMILY Adult model but in standing position: Holiday Christmas Deer - Low Poly Adult model but in laying position: Laying Christmas Deer - Low Poly Youngster model:…
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
This has been remixed from https://www.thingiverse.com/thing:1615502 and turned into a picture frame. Parts Needed (4) M3*8 screws Print Settings Supports suggested for the opening of the photo. Layer height of 0.20 mm or smaller. 10%…
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Stay Puff Marshmallow Man.
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Easy to print catch-all tray, prefect for keeping track of your stuff or organizing screws! No need for any support and can also be scaled bigger or smaller right in Prusaslicer! Thanks for checking it out!
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
🎬 Preview Images: The preview renders showcase the clean low-poly geometry of the animal figures and demonstrate how the models look both as standalone sculptures and in realistic environments . They highlight the minimalist design,…
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
This is a danman's remix Halloween Crow. I printed this in Prusa Galaxy Black PLA. Head is separated into two pieces. There are prepared holes for 5mm diameter LEDs and also CR2032 battery holder is included. Head is glued by two small…
I designed this because I couldn't found any low-profile keycaps that would fit my Keychron K3. Print on a resin printer to get the best quality. I also added a version for filament printers with higher tolerances so it fits. I sliced it…
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
Hello world, Here is my new version of the Orthodox Cross as a Keychain in a new and “lighter” design. I hope you like and use it :-) Would be happy and grateful when you drop a like <3 and share your makes with the community! Amen &…
dekorace k vytvoření duchařské atmosféry
Wife needed this as a planter so I hollowed it out.
This was supposed to be the original model, and the barrel from the previous model was supposed to be alone, but my father placed the barrel on the chassis, so we liked that a separate model was created. The chassis and wheels are…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
I created a version 2 that is solid instead of hollow. If you rotate the model so the teeth are straight up, the slicer will have no errors. Additionally no supports or brims are needed to successfully print.
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
This is a 12 piece jigsaw puzzle based on the Peano-Gosper curve , also known as the "Flowsnake". The Flowsnake fractal creates a snake-like path that never crosses. The path fills the complete space of a “Gosper island”, which resembles…
A whale shark model in low-poly style. Default orientation set the mouth part downwards. The model could be unstable during printing since it has a small bed side. Support materials or brims would prevent it from collapsing. GCODE set up…
🐾 Abstract Minimal Animals – Pets Set (Low Poly) This set includes four minimalist low-poly pet figures designed in a clean, modern geometric style: Dog, Cat, Rabbit, and Hamster. The models are intentionally highly simplified, focusing…
Remix of the model "Candy Skull Bowl" by Geoffro. It is a classic closed skull now. Single and multi-material versions included. Original model by Geoffro (HEX3D): https://www.thingiverse.com/thing:2595811 . Voronoi version added (3MF).…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
Be sure to upload makes!
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
The GCODE file contains a model in vase mode with dimensions X 100mm, Y 100mm, Z 60mm. Thickness and flow of the outer wall 0.65mm 150%, bottom of the pot 1.08mm, initial layer 0.28mm.
If you like to dry leaves and flowers for their preservation, I suggest you build this press. Perhaps, it can also be useful for other tasks. The pieces are designed to fit solidly and have no looseness. You may need to remove the burrs…
I created this remix because the original version was a bit larger than I needed, and I wanted to fit the cables in more snug. The original also broke when I went to attach the zip-ties, one bit snapped off. It was still usable, but I…
Motion Follow Eye Animatronics. This Arduino project uses an Optical Flow Sensor (ADNS3080) to capture movement. Then translate the data to move servo's making it look as eyes are following moving object. full project:…
Please click ❤LIKE❤ if you appreciate my work 😊 Bring a touch of art and symbolism into your space with this unique 3D model – a vase shaped like two hands holding a planter . This sculptural form not only beautifully showcases your…
I was looking for a low profile CNC clamps, which clamps material from the side of the material, not from the top. I wanted to have access to all the top surface while milling, not covered by any clamps. My clamps has 15deg angle, so they…
💀 Halloween Chibi #4 – Little Grim Reaper Meet the fourth character of my Halloween Chibi Collection! This adorable little Grim Reaper combines a spooky Halloween theme with a cute and friendly chibi design. With its oversized skull,…
Since I'm totally into the vase mode, I've designed a few vases in Fusion360 and am excited to share them with you as well. This vase gets more open at the top, is slightly twisted and has a chic triangle pattern. Size: 118mm wide and…
Spiral Mode/Vase Mode You can print it with: Nozzle 0.4/0.6/0.8mm (You can print 0.8mm line width with 0.4/0.6 mm nozzle) Layer Height 0.2mm/0.4mm (Recommended) Bottom Layers 4-10 Layers Scale it as you like :) happy fall season
Description I wanted something that could elevate my MacBook Pro 13" while letting me close the lid. Many other “elevators” hooked onto the sides of the laptop, preventing the screen from closing. Version 1 : a simple rounded bar, width…
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
I made a complete new version because i thought it needs to be more stable :)
🐘 Abstract Minimal Animals – Wild Safari Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Lion, Elephant, Giraffe, and Zebra. The models are intentionally highly…
Goku in Halloween in Fox Costume. Added Goku2.3mf and associated gcode on 8/30.2023. overall .4 offset with extra .6 offset at base of tail. From: Dragon Ball FighterZ. Added deep UV Textures.
Print in vase mode. The GCODE file contains a scale model with dimensions X 80, Y 80, Z 60. Outer wall width 0.65, outer wall flow 150%, base thickness 1.08mm, initial layer thickness 0.28mm, main layer height 0.2mm.
Printed with 0,2mm layer, 15% infill. Very easy to print. Scale it up or down as you need :) I’ll be glad if you share your print! NEW: Print a friend for your bird: bunny
2 monkeys that look like they are supporting something. Please note that the printed monkeys are not heavy enough to hold unstable books. If anyone wants to know: In the pictures the monkeys were printed from Prusament PLA Blend Viva La…
It is a model that needs to be assembled. I use four latches. I have added skirts for this Gcode. If you don't need You can use STL to modify it yourself.
A set of three different geometric flower pots, ready to print in Spiral Vase mode! Large: 13cm Medium: 10cm Small: 5cm Print instructions Best printed in prusament galaxy black in Spiral Vase mode 0.2mm layerheight!
Paint Pouring Flower with 10 spouts. The Flowers dimensions are approximately; 70x30 mm. This Flower features unique holding tabs on top to allow easy lifting from the canvas after its used for pouring paint! I recommend printing with a…
Vampire Teeth – 3D-Printed Halloween Accessory Perfect for your vampire costume: these lightweight, reusable vampire teeth are 3D-printed and, with PLA Glow , deliver a spooky glow-in-the-dark effect. Easy to print, quick to assemble, and…
Print Settings Material: Spectrum - Rust Copper Pla Nozzle: 0.4mm Layerheight: 0.2mm Supports: None Permiters: 3 For Mini Settings Printer Settings - Extruder Length: 1.2 Retraction Speed: 40 Retract amount before wipe: 0 This is…
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
Thanks to 3D Printy for the bobble models, and sb43201 for the original Santa Claus model that was remixed by so many others. The original Santa Claus can still be found on Thingiverse: https://www.thingiverse.com/thing:2702723 This took…
Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…
Infill: 10% Supports: 55.0° everywhere Layer hight: 0.2mm X-Size: 35mm Estimated printing time: 2H Wight: 14g
Use tree supports on build plate only + rear seam position. Introducing the Low Poly Thinker, a modern take on the classic sculpture! Standing at 115 mm tall, this geometric masterpiece is perfect for art enthusiasts and fans of…
This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…
Voici un porte carte de visite original qui vous permettra de décorer votre espace de travail avec un objet utile et beau. La conception est simple et peut-être facilement modifiable.
Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
Meshes for bonsai pots or flower pots, round Ø 41,5 mm and square 41,5 x 41,5 mm
Für den Stiel habe ich Blumendraht verwendet. Die löcher dafür müssen in der Blüte und im Blatt etwas aufgebohrt werden. Das Blatt ist schwirig zu drucken, ich habe mehrere auf einmal gedruckt, da sollte es kein Problem sein.
Nozzle: 0.4mm Layer: 0.2 (Recommended) Scale it as you like :)
Introduction: Photographic bellows is a very efficient tool that allows to achieve high magnification ratios with pretty much every lens. Below you can see a gif composed of three images taken using Cosina COSINON AUTO MC f/2.8 135 which…
Prevents things (usually my pants or shirt) from getting sucked into the air intake. Snap-in fit, removable Suggested print settings: - 0.20mm QUALITY - Prusament PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 20% -…
Inspired by LXO's fantastic “lowest poly thinker” (https://www.printables.com/de/model/1165-lowest-poly-the-thinker) (you should really check it out, it is probably my favourite 3d-model) i decided to create my own lowest poly statue, so…
Meet Mini Pillow Buddy , the fluffiest little companion that never needs fluffing! 💤✨ ✅ Ultra-Lightweight & Tiny – Weighs only 0.3 grams! ✅ Perfect for Desks, Shelves & Collectibles – A comforting addition to any space ✅ Fast Print Time –…