Search results: lrc

Sort order

116 models

P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 21x21mm GPS module such as HGLRC M100-5883

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…

Downloads
1,106
Likes
44
Rating
5
P
PrintablesBooomit

HGLRC M100 GPS Mount

A simple mount for the HGLRC M100 GPS module. Versions: - Plain - Flightory Mini Plank Hatch fitted

Downloads
332
Likes
19
Rating
5
P
PrintablesSzymon Szpularz

Volador VX5 T700 GPS Mount HGLRC M100 5883 and other

GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3

Downloads
285
Likes
17
Rating
0
P
PrintablesDmytro

HGLRC M100 GPS zip tie mount

HGLRC M100-5883 GPS zip tie mount for a FPV frame. This model is designed to fit securely on the top plate of the GepRC Mark4 7" drone frame. Recommended Print Settings: Material: TPU or ELASTAN (TPU 95A used in this case) Infill: 20%…

Downloads
272
Likes
10
Rating
0
P
PrintablesAlex

SpeedyBee Mario 5 GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI

This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 15x15 mm HGLRC M100-MINI GPS module on a SpeedyBee Mario 5 frame.

Downloads
269
Likes
20
Rating
5
P
PrintablesdnL

Cinelog 30 v3 & HGLRC m100 pro GPS Mount

Printed with PETG with .1 layer height. The MAG Alignment in Betaflight should be set to CW 90° in the config tab. But also confirm that the compass points the right direction in the setup tab.

Downloads
213
Likes
13
Rating
0
P
Printablesdeagon

GoolRC BL3650 540 Brushless Motor Reference Model

This is a reference model of a GoolRC BL3650-3500kv 540 Brushless Motor. Hopefully this should save other folk some time with their projects. You can view/download the Fusion 360 project here. https://a360.co/2XXPLjB Category: R/C Vehicles

Downloads
203
Likes
5
Rating
0
P
PrintablesMcFly

NamelessRC GoPro Naked Lite Mount - normal / iflight NLRC

Simple mount for Nameless RC Naked 9 / 10 / 11 for common GoPro mount and iFlight mount. I design with wireslot for betaFPV bt2.0 connector. Secure with the long m2 screw comming with the NLRC kit. Category: 3D Printing

Downloads
198
Likes
9
Rating
5
P
PrintablesModernBirdFPV

HGLRC M100 GPS holder for Flywoo Explorer LR

There are a few mounts around to get the M100 onto the Flywoo Explorer LR, but a lot of them have large covered portions that make me think that heat dissipation wasn't a factor in the designs. With this mount I left both the top and…

Downloads
185
Likes
1
Rating
5
P
PrintablesSynapses11

HGLRC Draknight 2S Battery Mount

Print as oriented with support in TPU . Wanted a battery holder that was a bit more snug than the one provided with the drone.

Downloads
171
Likes
10
Rating
0
P
PrintablesGuca

HGLRC M100-5883 M10 mount GEPRC MARK5 DC

HGLRC M100-5883 M10 mount GEPRC MARK5 DC TPU

Downloads
165
Likes
7
Rating
5
P
PrintablesSethOne
Downloads
137
Likes
4
Rating
0
P
Printablesoctosomething
Downloads
123
Likes
7
Rating
0
P
PrintablesOlivér Mihály

HGLRC M100-5883 GPS Mount – TBS Source One V6 (5")

GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.

Downloads
119
Likes
7
Rating
5
P
PrintablesFent

HGLRC M100 MINI GPS TBS Sourceone V5 Mount

I am new to printing and drones an i couldnt find a mount for the M100 from HGLRC so i made a simple one. TPU 30 % infill (maybe less but thats what i went with)

Downloads
117
Likes
7
Rating
0
P
PrintablesBenDaSpur

Tarmo5 Rim (GoolRC)

Update 1: My measurements seemed a bit off so updated them Update 2: Rounded most edges for better prints on v2 files Update 3: removed material so the 4x35 bolt can be used with v3 Update 4: V8 is best This is basic because I am new to…

Downloads
116
Likes
17
Rating
5
P
PrintablesMcFly

HGLRC - Rekon 7 pro - M10 Mini GPS Mount 18x18

Remixed the mount for a smaller GPS Category: 3D Printing

Downloads
110
Likes
3
Rating
0
P
PrintablesGuca

HGLRC M100 Mini mount GEPRC MARK5 DC

HGLR M100 Mini mount GEPRC MARK5 DC

Downloads
106
Likes
7
Rating
0

HGLRC Zeus350mW VTX

This is a sizing blank

Downloads
101
Likes
5
Rating
0
P
PrintablesAleliz

Flight Controller Guard for HGLRC Sector 5 V3 Frame

Flight Controller Guard for HGLRC Sector 5 V3 Frame. The fit is pretty snug (with PETG , with tpu i have tested and is not that much feasible) Heavily inspired by the Roma V2 Guards ;) Print Settings Printer: Artillery Genius Pro Rafts:…

Downloads
97
Likes
0
Rating
5
P
PrintablesFPV GEEK

Prop Guards for HGLRC Drashark 1.6-inch

These propguards are specifically designed for the HGLRC Drashark 1.6-inch quadcopter to protect your propellers and motors from impacts and damage. They provide excellent stability and durability without significantly adding weight to…

Downloads
92
Likes
7
Rating
0
P
PrintablesCraftyFPV

HGLRC Baby Shark battery holders - various sizes

Custom battery holders for the HGLRC Baby Shark/Drashark micro drone, designed for a variety of batteries. While they mirror the original holder's aesthetics, these ensure a superior fit. I've listed sizes and their corresponding…

Downloads
87
Likes
8
Rating
0
P
PrintablesDanZbo

Alien 5" GPS mount - HGLRC M80 PRO

update 30/09/2022 - updated design of version 1, added version 2 Designed for Alien 5" ReadyToSky frame. I printed it with TPU 95A. Other FPV stuff: Alien 5" GoPro mount Alien 5" action cam mount Alien 5" GPS mount Alien 5" Legs Mobula 6…

Downloads
86
Likes
4
Rating
0

HGLRC M100 GPS Strap Mount

I made this for someone that needed one and I figured that I would upload it here to make it available for other people. It's meant to be printed in TPU. I have neither printed nor tested this myself, but the photos are from the person I…

Downloads
84
Likes
2
Rating
0
P
PrintablesHordiWorks

HGLRC M100 Pro mount Mark4 10 inch

Simple TPU mount. Print top facing side down to avoid overhangs and to get nice surface finish.

Downloads
81
Likes
1
Rating
0
P
PrintablesVLS1990

HGLRC M100 Mini Arm adaptor for ApexLR 7

HGLRC M100 Mini Arm adaptor for ApexLR 7

Downloads
76
Likes
3
Rating
0
P
PrintablesAnthonyH

HGLRC M100 GPS Mount for AR Wing Pro

Fits the standard GPS cutout location on the AR Wing Pro. It is a friction fit, but I recommend using a bit of glue to secure it.

Downloads
73
Likes
4
Rating
0
P
PrintablesMakr3.0

Nazgul Evoque FPV drone back part (with HGLRC GPS module)

I didn't find the back part of the Nazgul Evoque properly 3D modeled on the internet for additional GPS module, so I designed an almost exact replica of the part where the XT60 and the video antenna are and extended it for the HGLRC M100…

Downloads
72
Likes
5
Rating
0
P
PrintablesPolo

Canopy for HGLRC Batman_220 By Polo

Racing canopy for "HGLRC Batman 220" drone frame. This canopy is only compatible with the micro camera series (L19mm*W19mm).

Downloads
67
Likes
3
Rating
0
P
Printablescharkear

HGLRC Petrel 75 Toothpick Frame

This is a frame for the HGLRC Petrel 75 whoop ready to fly kit converted to a 75mm toothpick frame. It is based on the HGLRC 120 carbon toothpick frame. The mini whoop uses a 25.5 mm AIO mounting holes for the flight controller. The motor…

Downloads
65
Likes
6
Rating
0
P
PrintablesNikaNinja

Mario Front mount for hglrc 5883 GPS + gopro mount

Made the mount using the original GoPro mount as base to fit my HGLRC m100 5838, made 2 holes in the front so you still see the lights. New version combine gopro mount and gps.

Downloads
62
Likes
1
Rating
0
P
PrintablesMupshot

HGLRC Rekon 35 SMA GPS mount

based on the original shape of the OEM part, I wanted to put an SMA antenna on my rekon35 quad.

Downloads
58
Likes
6
Rating
0
P
Printablesconstantin

TBS Source One V5 GPS Mount (HGLRC M80)

This is a mount for the HGLRC M80 GPS unit. You can print it vertically or place it on the back wall. Recommended settings: Material - TPU (SainSmart) Temp - 230/50 Infil - 100% rectilinear Mode - speed Nozzle - 0.4mm Layer height - 0.2mm

Downloads
53
Likes
9
Rating
0
P
PrintablesAlex Veden

Tinywhoop canopy with holder for HGLRC Zeus Nano

Lightweight canopy for tinywhoops that holds camera (Caddx Ant) and vtx (HGLRC Zeus Nano).

Downloads
52
Likes
6
Rating
0
P
PrintablesOctfx

Siren F3 / F35 HGLRC M100 Mini GPS Mount

GPS Mount inspired by https://www.printables.com/model/764135-quadmula-siren-f3-gep-m10-gps This fits a HGLRC M100 Mini GPS, or any GPS with the following dimensions: Width: 1.5cm Depth: 1.5cm Height: 0.5cm

Downloads
51
Likes
5
Rating
0
P
PrintablesMarco

HGLRC Drashark Box

Gedruckt aus PLA von Sunlu in 0,2mm. Keine Stützen notwendig !!!

Downloads
50
Likes
1
Rating
0
P
PrintablesARDev1161

Case for HGLRC Draknight 2 inch drone

Case for drone with 4 additional batteries

Downloads
47
Likes
1
Rating
0

HGLRC Rekon3 2S mod with bn180 support

I was tired can't carry camera on this little drone so i designed 2S mod to give him more punch. Now i can do mid range fligth carrying insta go or go2. My bottom part is designed for the Mamba F411 25A AIO and the short version of the…

Downloads
47
Likes
6
Rating
0
P
Printablesvelotinker

DRY BOX for 3D Filament: Hygrometer, Desiccant for cereal box with big champfer (remix from model from valRC)

please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc

Downloads
46
Likes
4
Rating
0
P
Printablescrazy.biker_84

HGLRC Rekon7 Walksnail Camera Mount & VTX-adapter

Unfortunately, the standard camera of the Walksnail Avatar digital FPV system does not fit in the HGLRC Rekon7 frame. In order to be able to install the system anyway, I designed other mounting plates and an adapter for the VTX. I have…

Downloads
40
Likes
4
Rating
0
P
Printables406FPV

HGLRC M80 gps mount

Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…

Downloads
39
Likes
3
Rating
0
P
PrintablesJack Lenders

HGLRC Moto Whoop 90 Ducts

The original ducts on my HGLRC Moto whoop 90 are made of 'glass' they break at the slightest contact. Drew up some repla

Downloads
37
Likes
4
Rating
0

Compact HGLRC Thor Pro 6 Hard Case

A compact hard case suitable for safely transporting HGLRC Thor Pro 6 parallel charging boards in densely packed FPV backpacks. Based on The Utility Box by Github user dppdppd .

Downloads
37
Likes
1
Rating
0
P
PrintablesStian

TBS Source One V6 GPS HGLRC M100 Mount

Should fit any GPS with 21x21mm profile. Does not fit the Source One V5. Printed using 95A TPU filament, 0.2mm layer height, 0.4 nozzle on a prusa mini+. Does not need supports.

Downloads
36
Likes
5
Rating
0
P
PrintablesMupshot

HGLRC Rekon35 battery plate riser

Rekon35 is a cool concept, but I had issues with the battery tray not maintaining contact and the model would reboot mid flight. remix flattens out the battery tray to allow use of the original 2s battery holder as intended and adds…

Downloads
36
Likes
4
Rating
0
P
PrintablesAlex

Apex Evo GoPro GPS Mount for 15x15mm GPS module such as HGLRC M100 MINI

You can mount gps either way - there is a dedicated hole for gps wires. V2: further improvements

Downloads
34
Likes
2
Rating
0
P
PrintablesVitalii FPV

APEX 5 cali , GPS HGLRC M100 PRO

Калібр Rama APEX 5 для GPS HGLRC 100pro

Downloads
33
Likes
1
Rating
0
P
PrintablesMupshot

HGLRC Rekon35 gopro mount Large

the existing Gopro mount is a little too small to properly mount a gopro or other action camera.

Downloads
32
Likes
4
Rating
0
P
PrintablesMcFly

GoPro 11 Mini Mount for HGLRC Rekon 7 TBS ND

Fixed Mount for GoPro Mini 11 with TBS ND .. for more space für bigger lipospacks. 30 or 35° angle Category: 3D Printing

Downloads
32
Likes
3
Rating
0
P
Printables406FPV

HGLRC M80PRO GPS mount

Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…

Downloads
30
Likes
4
Rating
0
P
Printablesjuiceofglass

HGLRC Draknight battery holder

V2: shortened the holder to not cover the USB port My battery holder for HGLRC draknight broke, so i modeled a stronger one. Optimized to print easyliy without supports or bridges out of TPU. It should be printed on the side. It is made…

Downloads
29
Likes
8
Rating
0
P
PrintablesMasterTim17

HDZero Analog Module OWLRC Cover

HDZero Analog Module Cover for OWLRC vrx

Downloads
28
Likes
1
Rating
0
P
Printablessetupfpv

GPS and antenna mount for HGLRC Rekon 7 Pro

GPS and antenna mount for HGLRC Rekon 7 Pro

Downloads
27
Likes
2
Rating
0
P
PrintablesARDev1161

ELRS T antenna mount for HGLRC Draknight

Made for this antenna - https://a.aliexpress.com/_EHRjSl6 I printed it from PETG, but you can try print it from TPU or something other I added a little glue between the antenna and the mount to make it sit more securely in place and to…

Downloads
26
Likes
2
Rating
0
P
PrintablesDanda 3D

Readytosky Johnny 5" V2 FPV HGLRC m100 GPS module holder without supports!

I made this case/fender for gps module HGLRC M100 which is atached to Readytosky Johnny 5" V2 drone frame printing: infill: 80% perimeters: 3 filament: eSUN TPU 95A supports: you dont need supports!!

Downloads
25
Likes
3
Rating
0
P
PrintablesBoA

Speedybee Mario8 HGLRC USB-C Extension for top hex hole

Speedybee Mario8 HGLRC USB-C Extension for top hex holeSpeedybee Mario8 HGLRC USB-C Extension for top hex hole. Use 2 M2x8 or M2x10 screws for assembly.

Downloads
25
Likes
1
Rating
0
P
PrintablesTRE Di Print

Support GoPro DALRC 215

Support GoPro any version for DALRC 215 FPV Drone

Downloads
24
Likes
13
Rating
0
P
Printablesf16v1per

iFlight Nazgul Eco Dual Antenna and HGLRC GPS Mount

For the iFlight Nazgul XL5 ECO Features: GPS mount for HGLRC M100 GPS ELRS antenna guides Dual SMA mounting bulkheads Vertical XT60 mount I printed mine in TPU with supports only on bridging areas.

Downloads
24
Likes
3
Rating
0
P
PrintablesBrendanFPV

HGLRC M100 GPS Mount for RC Planes

HGLRC M100 GPS Mount for RC Planes This is designed for flat mounting the HGLRC M100 GPS in RC planes, using double sided tape or similar. I recommend printing this in TPU. HGLRC M100 GPS Mount for RC Planes: HGLRCM100_GPSMount.stl

Downloads
23
Likes
1
Rating
0
P
Printablestboss

HGLRC Wind 5 Foxeer Box 2 and Antena mount

Hglrc Wind 5 with antenna mount for Rush Tank VTX and camera mount for Foxeer Box 2. Print instructions Unassociated tags: rush tank, wind 5 Category: R/C Vehicles

Downloads
22
Likes
0
Rating
0
P
PrintablesLoading

HGLRC Veyron 35 SMA antenna mount

This is a antenna mount i designed for the 3.5 inch HGLRC Veyron 35 drone. It is compatible with the SMA antenna mount

Downloads
21
Likes
1
Rating
0
P
PrintablesSynapses11

HGLRC Draknight White Foxeer Lollipop 4 mount

Print with TPU and support oriented upright.

Downloads
21
Likes
5
Rating
0
P
PrintablesEuan

Leopard FPV Drone - HGLRC M100 mini mount

mount for an M100 mini gps instead of the M1000

Downloads
20
Likes
2
Rating
0
P
PrintablesHerbert

HGLRC Rekon LR4 Frame arm guards

arm guards vor HGLRC Rekon LR4 Frame

Downloads
20
Likes
2
Rating
0
P
PrintablesYoufu

Five33 Lightswitch V2 Ultra arm cover with HGLRC LED strip

Five33 Lightswitch V2 Ultra arm cover with HGLRC LED strip There are 3 versions, a normal cover without LED, one with LED slot for the HGLRC LED, and one with a slit for if you're using an opaque TPU though it will only be visible from…

Downloads
19
Likes
2
Rating
0
P
PrintablesRiley Entropy

HGLRC LED Controller and Armlight

Addressable 2812, Includes wires

Downloads
19
Likes
1
Rating
0

JeNo_3inch_Antenne + HGLRC WS2812b Beeper/Led

support pour antenne VTX incluant un support pour Buzzer et LED HGLRC

Downloads
19
Likes
1
Rating
0
P
Printablesbostromlabs

TBS source one v6 - HGLRC m100-5883 gps and sma holder

bang holds gps and antenna. fusion for basic stuff(not paying for generative design so just ended up doing it manually in blender :)).

Downloads
18
Likes
0
Rating
0
P
Printablesmaramao

HGLRC Sector 5 30degrees GoPro session 5 mount with ND filter slot

GoPro session 5 mount at 30degree tilt for hglrc sector 5 frame the mount will fit a tbs nd filter Print Settings Rafts: Doesn't Matter Supports: Yes Filament: eSun tpu Category: R/C Vehicles

Downloads
18
Likes
0
Rating
0
P
PrintablesSTRIKING FPV

Camera Servo Tilting Mechanism for HGLRC Veyron35 CR Pusher

These are the pieces I designed to add servo-tilting functionality to my HGLRC Veyron35 CR Pusher. I consider it strictly to be a prototype, so for more context on how and why, please watch this YouTube video which explains the reasoning…

Downloads
18
Likes
2
Rating
0
P
PrintablesJulien Tim2lux

HGLRC M80 GPS, vifly finder 2 buzzer, Vista antenna mount for BDR Iris drone

Hello This is a mount for the BDR Iris drone : https://rotorbuilds.com/build/27906 It allow to fix: - HGLRC M80 GPS - vifly finder 2 buzzer - Vista antenna mount To be printed in FLEX. Happy flight. Julien

Downloads
18
Likes
0
Rating
0
P
PrintablesawesomeArne

HGLRC m100 Fixed wings case-support

a basic support for any RC fixed wing (A10 Thunderbolt II in my case)

Downloads
18
Likes
0
Rating
0
P
PrintablesClément

HGLRC M100-5883 gps mount for QAV250 frame

print it in abs , you will need 4 M3 screws and 4 nuts you need to flex the part to put the gps in and then screw it in the frame

Downloads
17
Likes
1
Rating
0
P
PrintablesEastwest Design

Loopring ( LRC ) Key chain

you can use it as a key chain. if you like crypto or in general blockchain technology and find it interesting. then this is the perfect keychain for you! Best results found to be using a default settings: Layer height - 0,2 or 0,1 0,4mm…

Downloads
15
Likes
2
Rating
5
P
PrintablesTiyofpv

Hglrc Wind 5

- protections bras - support camera nebula pro - support antenne lollipop - protection lipo 6S 1300mah - protection elec stack + vista - top plate avec aileron + logement M10 Mini GPS - FlyFishRC - support XT60 + condo prints en TPU en…

Downloads
15
Likes
1
Rating
0
P
PrintablesBrendanFPV

AOS UL7 V5 - HGLRC M100 GPS Mount

AOS UL7 V5 - HGLRC M100 GPS Mount GPS Mount for the HGLRC M100 that slides over the rear standoffs. The standoff tubes are 20mm to match the one I received from IFlight, so I've included a 5mm sleeve/spacer to fill the gap if you aren't…

Downloads
15
Likes
0
Rating
0
P
Printables3Drone

Base ajustable pour HGLRC Sector 5V3

Base ajustable pour monter votre Gopro sur le HGLRC Sector 5 v3 . A imprimer en TPU , a la verticale.

Downloads
15
Likes
0
Rating
0
P
PrintablesAntaeus

Replacing the plastic part of the handlebar of the hiper model b2 elrctric scooter

The original plastic part has a large backlash and is attached by self-tapping screw, which also over time loosens. There are two holes on the steering wheel to attach the plastic part, the regular one is attached only at the bottom. The…

Downloads
15
Likes
0
Rating
0
P
Printablesmaramao

HGLRC Arrow 3 SMA Antenna mount

standoff distance 20 mm hole/standoff diameter 4 mm Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Infill: 100% Filament: tpu tpu Category: 3D Printing

Downloads
14
Likes
1
Rating
0
P
PrintablesMagpie

RaspberryPI Flrcr_SSD_-_Final_with_SD_cutout

Taken from https://www.thingiverse.com/thing:4754460/files, converted to STEP

Downloads
14
Likes
1
Rating
0
P
PrintablesLuke Marty

Traxxas Stampede GoolRC 60A ESC Holder

Replacement ESC holder for Traxxas stampede with Titan 12T brushed motor. Allows for direct mounting to original traxxas esc mount on stampede.

Downloads
13
Likes
1
Rating
0
P
Printablescrazy.biker_84

LiPo strap mount for HGLRC Ublox M8N GPS

LiPostrap mount for the HGLRC Ublox M8N GPS Print Settings Printer: Renkforce RF2000 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100% Filament: Renkforce TPU, TPE Notes: I´ve printed this with a 0.8mm nozzle, 2 outer…

Downloads
13
Likes
0
Rating
0
P

HGLRC Veyron 30CR

I printed them in TPU. 0.2 layer height I used hairspray to make it stick to the glass bed as usual. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Saintsmart TPU Red…

Downloads
13
Likes
1
Rating
0
P
PrintablesJOHN DAVID

Arris 250b HGLRC Pole Antenna mount

A HGLRC pole antenna mount for the Arris 250b frame, for easy unmounting for the caddix vista long range antenna for easy drone storage

Downloads
12
Likes
0
Rating
0
P
PrintablesGGK

traxxas stampede Goolrc esc 60a holder

A custom holder to hold a Goolrc 60a esc that screws into the four screw holes in front of the rear shock tower in the chassis, it is a snug fit do it won't fall out. the little slots in the side are for a zip tie to go around and hold…

Downloads
11
Likes
2
Rating
0
P
Printableslo_core3D

HGLRC Rekon 5 Antenna Mount DJI O3/O4

Single and double antenna mount for the HGLRC Rekon 5. Should/could fit other frames with 4mm standoffs that are 12mm apart (center to center). Made it to fit a single antenna (DJI O3) as well as the double antennas of the DJI O4. Printed…

Downloads
10
Likes
0
Rating
0
P
PrintablesTheo Boyer

HGLRC M100 GPS mount for SpeedyBee Master 5 HD

This is a dedicated GPS mount for the HGLRC M100 GPS module , designed for the SpeedyBee Master 5 HD frame. The mount uses a 22 mm mounting hole spacing and is designed to fit directly onto the frame. Features Designed for HGLRC M100 GPS…

Downloads
10
Likes
0
Rating
0
P
PrintablesTRE Di Print

GoPro session support DALRC XR215PLUS

GoPro Support for DALRC XR215PLUS Category: Hobby

Downloads
10
Likes
3
Rating
0
P
PrintablesFynniboyy

HGLRC RC2 Tray

The HGLRC RC2 is a clone of the TS100 wih a biggger body. It uses the same tips. The botom part is the same

Downloads
10
Likes
2
Rating
0
P
Printables28black fan

Reflrctorholder

Reflector diameter = 60mm Strew for reflector = M4 x12 Mountung screws = M5

Downloads
8
Likes
1
Rating
0
P
PrintablesCodeMinion

HGLRC Draknight Battery Harness

Battery harness for HGLRC Draknight 2" Toothpick Drone. (Drone) Designed to hold: 450mAh 7.4V 75C 2S LiPo Battery Note : Only the Battery Holder v2 has been flight tested. Printed using 95A shore hardness TPU.

Downloads
8
Likes
2
Rating
0
P
Printablesbando fpv

iflight nazgul xl10 gopro+ hglrc m100pro gps on front

can switch gps holder. just let me know. using tpu 95A

Downloads
8
Likes
0
Rating
0
P
PrintablesoXiVanisher

DalRC XR215(Plus) TBS Unify antenna mount

Object to mount a Team Black Sheep Unify antenna on a Dalrc XR215(plus). Category: R/C Vehicles

Downloads
8
Likes
0
Rating
0
P
PrintablesoXiVanisher

DalRC XR215(Plus) 20 degree GoPro Mount

Completely redesigned mount with added antenna holders. Category: R/C Vehicles

Downloads
8
Likes
0
Rating
0
P

HGLRC Rekon 10 Pro V1 Capacitor Mount

I made this to mount the large capacitor that comes with the Jijie (DakeFPV) H743 stack with 70amp ESC in the HGLRC Rekon 10 Pro frame. There isn't much space in the frame for the capacitor, so a discrete mount was the best solution using…

Downloads
7
Likes
2
Rating
0
P
PrintablesoXiVanisher

DalRC XR215(Plus) 20 degree Xiaomi Yi Mount

Completely redesigned mount with added antenna holders. Category: R/C Vehicles

Downloads
7
Likes
1
Rating
0
P
Printablescromer

HGLRC Rekon7 GPS + RX Extension Soft Mount

This is a soft mount for a GPS (HGLRC M100). This get's the module far enough away from the motor EMF that the compass can be used for navigation. Included are the GPS holder, rx mounts for a crossfire nano rx antenna, and some soft…

Downloads
6
Likes
2
Rating
0
P
PrintablesCelulari

dalrc xr215 GoPro Mount

Customized version of http://www.thingiverse.com/thing:1068400 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1068400 Instructions Using the following options: front_cc = 28 back_height = 30 velcro_width…

Downloads
6
Likes
0
Rating
0
P
Printablesshadow1117

HGLRC Recon Y6 Top Plate without GoPro Mount and with 18mm GPS

Just the original plate without the gopro mount part because i thought its ugly. print in TPU or whatever i dont judge, it has a little bit of mechanical inflence due to 3 Frame Screws going through it so a good amount of infill is…

Downloads
5
Likes
2
Rating
0
P
PrintablesMatthias Keis

GPS Antenna Holder 18mm for HGLRC MY7

Created this model to hold the gps antenna for my HGLRC MY7 frame. The antenna i used is the Sologood M10-180C, with a width of 18mm and a heigh of 19mm without the plug. The distance of the fixing screws (holder to frame) is 24mm. I used…

Downloads
5
Likes
0
Rating
0