1,398 models
Author: Cipis https://www.prusaprinters.org/social/18/prints 2-color Remix for multi-material printers. Print takes roughly 2 hours and 40 minutes at 200 µm layer height with 2 materials (Ext. 1 – Blue, Ext. 2 – Silver) . Original model:…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
This is a multimaterial remix of Articulated Christmas Toys by bq3D ( https://www.thingiverse.com/thing:1168292 ) These are relatively easy prints that print in place without support. If your first layer adhesion is a little low, a brim…
Author: Dominik Cisar https://www.prusaprinters.org/social/7/prints The Man. The myth. The legend. Little Josef Prusa Character, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of…
Scale Sized Bowling Pin Printing Instructions You can achieve the same print without a MM printer by using PrusaSlicer and adding filament changes on the Single model. See screenshot. Versions v2: Added unified stripe STL Reduced print…
This is a simple model designed to test the Prusa MMU3. It uses all 5 filaments to create a palette identifying each spool by its number. Its definitely not the prettiest model you will print with your MMU3, but it is certainly useful to…
Updated version of the table coaster for MMU2S or any other mutlicolor printer Layerhigh: 0.15mm Support: no need Material: PLA wood or what's in your shelter 😊
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
A minimal material paintbursh, pen and pencil holder. Keeps paintbrushes apart. The rods are fragile and are push fit so be careful assembling it
Deteriorated Bone Material or a Pile of River Rocks. Figured this could be used in a Gamefold or the ilk.
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Apple Fruit Fly Trap Fill ¼ - ⅓ full with apple cider vinegar and close the top. Discard after extended use, do not drink fruit fly filled apple cider vinegar. Printing Instructions Supports Required. Timelapse
Scale Sized Bowling Pin - Crown Stripe
Prints well large or small -- if you have dry filament you can go with a larger nozzle, as there isn't too much textural detail. Latest version adds seam painting and fuzzy skin where they're supposed to be fuzzy. When large, textured…
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
Recommendation print it with 0.1 mm layer height print the palette and the mainBody in one piece and do color change print the text separate and glue it on it doesn't matter on material
Found this design by ferferite but I wanted the numbers hollow to save space. In doing the remix created both hollow and multi-material designs. Easy to print, in less than 20 minutes you'll have a fillet gauge to start finding out what…
Buddy, but more festive. I remixed the original buddy model in Blender to add a Santa hat. Looks good scaled up a little. Print instructions The included .3mf is sliced for the MMU2S with black PLA in extruder 1, red in extruder 2 and…
Check your material thickness quickly with this easy mod. gauge is in metric units. Cut from 5mm acrylic or wood Text can be cut or engraved. File is provided in .ai .svg and .pdf format
Manual multimaterial project specially fine tuned for MK4 and MK4 only. Before finding the proper settings, I experienced bubbling, over extrusion and jammed filament. I am now having a clean wipe tower and nice multi-colour parts. You…
/!\ This is a concept, work in progres /!\ Edit 9/03/2026: V2 available here: https://www.printables.com/model/1632023-v2-multi-material-kept-simple By printing this set of part and adding the special toolchange Gcode in your slicer you…
Remix of Deck box but modified to use two colors instead of inset design.
An Inkushuk is a manmade stone landmark used by the First Nations people of the Arctic region of North America. The word inuksuk means "that which acts in the capacity of a human". They vary in size, shape and complexity, but often…
Die Lehre eignet sich gut, um größere Radien von Modellen oder Skizzen abzunehmen, wenn kein vollständiger für eine Messung mit einem anderen Gerät vorhanden ist. Das Modell ist aus PETG und mit MMU3 gedruckt. Es ist damit ein wenig…
The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…
This project includes all files necessary to reproduce Plate 1 of the TaTaBook "Geology". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/XmWKdw Designed by Trnka, n.o:…
This model is based on the entry 6cgr from the protein data bank (PDB), presented in this publication: Dai, X., & Zhou, Z. H. (2018). Structure of the herpes simplex virus 1 capsid with associated tegument protein complexes. Science , 360…
Was looking for a set of coasters of something I liked. I liked the square design of the NASA coasters from Zaky20 and the stackable aspect of Michael 's designs. Ended up remixing the designs so I would have a square coaster that would…
NOTE: Files must be split to reveal the numbers. These are a multi material version of numbered miniature base markers I made to use with printed miniatures for the board game Gloomhaven. I printed them in white to represent the standard…
Egg for darning socks, which can be opened into two screwable parts and contains small parts essential for sewing. Material used: PLA CRYSTAL. Only the thimble is in TPU.
Paint or glue mixing cup. Optimized for minimal material consumption. Ideal for leftover filament. Three sizes with equal wall thicknesses (0.7 mm). Can be printed in PLA, PET-G or other materials. 0.3 mm Layer height (first Layer 0.2 mm)…
Für Rundmagnete 8 mm x 3 mm
Printing in multiple pieces was not an option.
This is a remix of the 3dVerkstan 6-hole shield for North America, that adds a small embossed "PLA" tag in the drip tray. This identifies the material used to print the visor, so users know what they can use to sterilize and re-use it. If…
Compatible with refills with inner diameter of 100mm and width 60mm (eg. SmartMaterial). Press-fit installation - There are two holes to install screw inserts, but they don't match the holes in the spool sides. Print in PETG - Settings…
2x2x2 unit cells of a diamond crystal structure with impurities Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for…
1kg Master spool refill coils Filament coils with the dimensions: 2x Inner hole 90mm 3x Width 56mm 3x Width 58mm Spool diameter 200mm Easy install Label Material: ABS, PLA, PLA+ & PETG Label Colour: Blue, Black, White, Green, Red, Silver,…
bez podpor, tisknuto z PETG, lze vytisknout i na MINI.
This model is based on the entry 7r5k from the protein data bank (PDB), presented in this publication: Mosalaganti, S., Obarska-Kosinska, A., Siggel, M., Taniguchi, R., Turoňová, B., Zimmerli, C. E., ... & Beck, M. (2022). AI-based…
2x2x2 unit cells of a diamond crystal structure. Instructions Print with paint-on support for the two overhanging carbon atoms. Use a brim. Rest prints okay-ish without support, but needs some cleanup. Model is designed for Prusa XL and 3…
The unit is mm With the prusa mini printer, make borderless printing.
This project includes all files necessary to reproduce Plate 7 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/FEFoew Designed by…
This project includes all files necessary to reproduce Plate 2 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/kMS8-A Designed by…
Are you tired of rummaging through your gym bag to find what you need? I was! To keep everything tidy, I got some smaller bags for different items, and then realized I could design and 3D print custom tags to identify each one. These tags…
A simple organizer to store various laserable material samples from trotec
A remix of the model Filament sample with box from Zahg . If you need the case for the samples, in the original model includes a great one. Direct downloadlinks for case : box_ top _ pla _v2.stl , box_ top _ petg _v2.stl , box_ top…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
The multi-material Prusa MMU3 test objects are useful to quickly test the reliability of the material changes during printing. These simple objects can be printed using different materials and colors, allowing users to test how well the…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
This is my take on my own award winning Flexi Sloth design as a multi material print. There is a pre-painted .3mf file and an .stl file. I also made a pre sliced print file for MK3S+ with an MMU. I will add a file of only the face so you…
Want to reuse toys you already have in a new way. Why not challenge your fantasy by making gigantic bridges and ramps with wooden trains (like Brio or IKEA) with help of simple Duplo bricks. These adapters will make this happen! I got…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Author: Cipis https://www.prusaprinters.org/social/18/prints 3-color remix Remix for multi-material printers. Print takes roughly 3 hours and 40 minutes at 200 µm layer height with 3 materials (Ext. 1 – Green, Ext. 2 – Blue, Ext. 3 –…
This is an anatomically correct human heart. It is created as a multi material version: The heart's Ateries, Atrium, Valve, Ventricle, Papillary and Veins are a seperate file, so you can print a fancy multicolor heart ;) The Ventricle has…
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3824261
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
Modified primarily for multi-extrusion printers, but since I have quite significantly reworked the original model I decided to include single extrusion model too. Other modifications (apart from preparation for color printing):…
The existing Elder Wand designs all look nice, but none of them are particularly screen accurate. I set out to design a more organic version to have a custom model to sell in my Etsy shop. I'm releasing it under a non-commercial license…
Multimaterial remix of the pretty figurine. 3mf files included
Featuring my latest design, a baby dragon, you can add this cute little guy to your arsenal of dragons! Discover the joy of 3D printing with our Baby Dragon 3D model! Crafted meticulously by Bearded Printer, this model is an ideal…
I took the Gecko from WebmasterZero on Thingiverse and painted it in Prusaslicer to print in multicolor. In the files you will find two 3mf files with the two versions from the photos. Just choose your printer with your perimeters in…
Update: 02/03/2023 I am now the proud owner of a Bambu Labs X1CC and am enjoying the AMS. I never printed my Foxy in multi colour at home and was horrified to find issues with this version of the model it which would affect a successful…
Remix for multi-material printers. Original model by SparkyFace5: https://www.printables.com/model/242259-omnom Print instructions Scale 150%. OmNom 3MF info: E1: Green E2: Black E3: White Candy 3MF info: E1: Yellow E2: Red
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3033103
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Not recommended for beginners. also available on Makerworld https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491 The Pico MMU is an open-source project designed to enable multi-material 3D printing on…
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3835952
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
This is a Multimaterial Remix of Halloween Pumpkin Spider Transformer by Megawillbot ( https://www.thingiverse.com/thing:3129886 )
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
Use these swatches to organize your growing filament collection! The interval step version can also double as a calibration print and help you dial in new materials. These steps range from 0.2 mm to 1 mm in size. Includes swatches for:…
Inspired by a shirt worn by Sheldon Cooper on the Big Bang Theory, I've designed a Melting Rubik's Cube ;) This is a 5 color print for the Multi Material Upgrade 2.0. A single file for manual painting is also included. Print instructions…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
This version's skull is rotated and cut so that it needs about 55% less support material. The parts must be glued together; I recommend Acrylic Cement, which melts the parts together really well. The split for the sword pin is...…
¡Saludos, comunidad de amantes de la impresión 3D en prntables! Me complace compartir con ustedes mi último proyecto: una torre de temperatura diseñada para probar diferentes materiales de impresión 3D. Si alguna vez te has preguntado…
ATTENTION: CONTAINS ONLY DRAWER BOX; DRAWERS ARE FOR CLUB MEMBERS ONLY It is a perfect solution for organizing your small items. The modular package design allows you to stack multiple boxes on top of each other and provides a functional…
Multimaterial remix. Original model by Alsamen: https://www.thingiverse.com/thing:4410839 Print instructions Adjust purge volumes for your filaments.
Stackable Crate Plus - Honeycomb Edition (less material) | REMIX note: The new crate (white) has 1.25 mm thinner walls and the bottom is about 1.5mmm thinner. In the slicer pics, you can see the material difference for the same settings.…
Multimaterial remix of the nice model.
Remix for multi-material printers. Original model by 3Demon: https://www.thingiverse.com/thing:1700233 Print instructions E1 - Body E2 - Shell Second snail as sacrificial object for wiping.
this baby yoda vomit toothpaste cap is a remix frrom https://cults3d.com/es/modelo-3d/artilugios/baby-yoda-pasta-dientes-thootpaste#_=_ but painted and laminated in prusaslicer and MMU2 Ready. The Gcode and the 3mf are uploaded.
These are parallel pliers that you print in place. No supports needed, no assembly, they work as soon as you pick them up off the build plate. You will need to have a printer with decent bridging as there are some long ones in this print.…
Please see Printical's original sloth listing for a full description! All I did was make life a little easier for multi-material printing a pre-made face.
This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…
Remix for multimaterial printers. Original model by Alberto Samen (Alsamen): https://www.thingiverse.com/thing:3557522 Print instructions 3MF info: E1: dark grey E2: silver E3: white E4: black
I did not modify the tongue so you can get it from the original model
Print on Prusa MMU Everybody needs a Hearthstone. Stone Filament: https://smile.amazon.com/ZIRO-Printer-Filament-1-75mm-Marble/dp/B01IIAC2MW/ref=sr_1_2?ie=UTF8&qid=1521210609&sr=8-2&keywords=ziro+pla&sa-no-redirect=1 Teal Blue Filament:…
This solved my biggest beef with day to day management of manual filament changes. Yes I have AMS units on numerous machines. but for some I stick with manual. I periodically make updates to this file. I mostly use Makerwold and the only…
hey, hey! If you like this kind of stuff consider supporting me on www.patreon.com/wekster
single and multimaterial
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
This is the prusa lizard (multi-material) but instead of the eyes being a solid color, I added a pupil.
Watch the full video here: https://youtu.be/Ph1zwEaxEB4 I thought it could be fun to take my old Tigger model and slice it for printing on the Palette+. Little did I know, the journey I was about to embark on to get this thing printed.…
Remix for multi-material printers. Original model by mooses: https://www.thingiverse.com/thing:50212 Print instructions Unassociated tags: cuddling owls, dual extrusion Category: Animals Summary Remix for multi-material printers. Original…
Change list: 10/8/23 round 2 : Updated profile purge volumes and 3MF files. 10/8/23 : Updated to v16, with a chamfer tweak to the model to aid testing, and fixed print profiles to be better. Multi-material systems are great for many…
Perpetually poppable fidget toy with a simple TPU mechanism. https://youtu.be/_vFLbze1DHM Case Options 1x2 1x3 1x4 1x5 1x7 2x2 3x3 4x4 5x5 8x8 24x24 (requires a 300x300mm print bed) Insert Options Default - 0.45mm internal radius Loose -…
Sheep for multi-material printers. Single extrusion version is also included. Head supports are optional. Model is based on Unicorn by Pipe951 ( https://www.thingiverse.com/thing:2353122 ). It is probably first unicorn to sheep conversion…
Size Dimensions (Length x Height) Width / Thickness Mounting Hole Diameter Large 22.0 cm x 22.0 cm 4.80 cm 0.6 cm (6 mm) Medium 17.6 cm x 17.6 cm 3.80 cm 0.5 cm (5 mm) Small 13.2 cm x 13.2 cm 2.88 cm 0.4 cm (4 mm)
