Filamentalist 100mm rear load
Roller can fit 1 ⅓ Rubberband so it requires cutting a second band. For the most part follow the instructions at…
- Downloads
- 74
- Likes
- 18
- Rating
- 0
Counting matching models…
Roller can fit 1 ⅓ Rubberband so it requires cutting a second band. For the most part follow the instructions at…
We wanted to have a small organizer for the kitchen. None of the models really fit our needs, however, we got partly inspired by another model (https://www.printables.com/cs/model/569365-sink-organizer). This model has 3 compartments.…
Printed with 4 Perimeters, 15% Adaptive Cubic infill with PETG. Paint supports on the hole ceiling, change Support Options “top contact z distance” to .25 and “Pattern Spacing” to 3mm for easy to remove support.
Elementalist Lux 3D Bust – Capture the magical essence of League of Legends with this beautifully detailed bust of Elementalist Lux ! Inspired by one of the game's most beloved champions, this piece brings her radiant elegance and mastery…
Small box originally designed to store some prescription medicine containers. Six compartment each 5 cm square and 7.5 cm high. The top nests over either the top or the bottom.
Original part : https://www.myminifactory.com/object/3d-print-eevee-and-espeon-37953
To Do: Add comment re: beveling inner edge of PTFE tubes and cleaning up filament funnel hole if necessary. Update pics to latest parts Discuss tuning for rim slip vs o-ring slip and recommended roller surfaces. Cover o-ring replacement…
Filamentalist mods rear or bottom discharge version
SAMLA Drybox housing Filamentalist Rewinders: Mounting for Filamentalist Rewinders inside of the SAMLA 22L Container as a Drybox. Filamentalist V3 added! (Pictures Pending) While testing V3 I found an issue that was always causing…
Printed solid at 0.12mm layer height in 95A tpu
Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…
I like the Filamentalist F1 mod but also like the way the Filamentalist Rewinder fitted in the enclosure so I made this I printed in ABS using the Voron Print Specs Amount of filament used approx. black 90g red 70g BOM Qty Part 2 8mm x…
Poszerzony model @jinghuaGao_411549 z kosmetycznymi zmianami.
After trying several different solutions for my filament spool dry-box enclosure needs, I decided to design my own. I really liked the Ultimate Cereal Box Enclosure system by @GunplaMark , but wanted the reliability of the Filamentalist…
Made a remix so I do not have to use tools to press fit and break one-way bearing. HF081412 One-Way Bearing
I bought the QBRICK Pro 300 to better organize screws, bolts, and small accessories, but once it arrived, I realized that the available compartments were too large for the size of the pieces I use. I found some replacement trays on…
Here is a quick video of the printed model. ⬆ The Compartmentalized Rhombic Dodecahedron is a unique geometric model featuring a rhombic dodecahedron with subdivided, hollowed compartments within each face. This design highlights the…
Filamentalist profile version stand.
Attempt to change style of Filamentalist F1 mod Edit 22/04/2025 : The parametric f3d is made to export any rim and tyre width. New 10 sprokes rim. Print parts: ABS parts, follow Voron settings (40% infill, 5 top/bottom layers, 4 walls,…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
This is universal model for parametric compartmentalized box for small parts. Originally built for various sizes of MicroSD cards, but can be used for pills or other small things. It has several interesting properties: Any number of…
Filamentalist Center Wheel alternative for my custom Filamentalist setup that doesn't require a HF081412 bearing. material: pla line height: 0.2 mm see screenshot for example of seam settings in orca slicer Log: V2 - Added additional…
I needed a mount for the Filamentalist rewinder (version 2) to integrate with my reprack filament storage. As the height between the individual filament racks was limited, i tried to keep it as low as possible while maintaining the…
Another awesome Pepakura file cleaned up ready to print, Cheers Jace
The Samla Filamentalist F1 is a combination of the original Filamentalist and the F1 mod, with additional parts so that 4 rewinders next to each other can fit into a Samla 22l box to use as a dry box. The hardware parts list is mostly the…
It has been observed that existing files do not have output tolerances applied when assembling after printing, which may result in occasional breakage during assembly. In light of this, we have taken the liberty of re-adjusting bolt…
The structure is made with 2020 aluminum profiles and polycarbonate panels , making it a cost-effective alternative to a typical four-slot filament dryer .
Filamentalist TPU parts Resized to 62mm ID with 2mm Thickness (66mm OD), Height 12mm & 18mm.
The file 2020_Mnt_Center_Spacer_[option].stl that comes with Filamentalist V3 allows it to be mounted to a 2020 extrusion, but if that extrusion is sitting on a table or the top of a printer, it is so short that the large drive wheels of…
The Filamentalist_v3 connects to its base using a "clip-on" design, similar to the method used by Emu , and only requires two M3x8 screws to be installed in the back. The original enclosure (or box) used six toggles, which I felt were too…
Celebrate the radiant beauty of Elementalist Lux in her Light form with this stunning full statue! This masterpiece captures Lux’s ethereal elegance, as she channels her mastery of light magic with grace and power. The statue showcases…
A simple mount to attach Filamentalist v2.0 auto-rewinders to a RepRack shelf. I think v2 is also called Classic–I gave up trying to make sense of the project naming approach. Filamentalist v3.0 apparently comes with a RepRack mounting…
This is a very simple socket that mounts below a Filamentalist Roller/Rewinder/Buffer ( https://github.com/Enraged-Rabbit-Community/ERCF_v2/tree/master/Recommended_Options/Filamentalist_Rewinder ) and turns it into a very simple extruder…
Print with ABS or other high temp filament. I printed with tree support without issue. Step files included since they are a remix of Sunlu's release. Included the PDF from Sunlu as well for some direction. The covers can be removed by…
The Compartmentalized Rhombic Dodecahedron with Attached Base builds on the elegance of the original design with a seamlessly integrated base for stability and display. This enhanced version prints beautifully, quickly, and support-free.…
4 filamentalist F1 in a smala 22l drybox BOM for fixing the 4xF1 on the 2 feet : 8xM3x14 M3x9x1 washers 8 M3 thread insert Insert the M3 threads fully, they are not flush, they go 2/3mm inside the foot. Drilling : Use the drill guide with…
The filamentalist rewinder is an awesome alternative to a filament buffer. It uses the filament itself to drive a roller that then rewinds the filament back onto the spool. The design also includes a pre-gate sensor option that uses Omron…
Rewinding Spool Holder When I first saw Filamentalist (https://github.com/Carrot-collective/ERCF_v2/tree/master/Recommended_Options/Filamentalist_Rewinder/Filamentalist_Classic_Rewinder) working, it was magical. There was one big flaw in…
This is a minimal, fully printed (apart from parts listed) solution for mounting the Filamentalist V3 rewinders to the Core One. Its simple to print and should require less than one 1kg of filament. Includes a "mini multi buffer" unit to…
This scalable token tray fits within in the Herd Mentality board game pink cow pasture to hold both sets of tokens.
Remixed just the legs as the spool was hitting one side and was not below the rim of the drybox. Also created desiccant box, you use both sides or just one. Is designed to snap to the center frame box area. Has 2 finger areas to get…
I needed a small box to store and organize my minis so I modelled this. This is the second model I made for 3D printing so please leave feedback. Be careful with the supports, you can see that I sort of over did it with the supports so…
Allows 250g spools to fit by adding another idler when you need it and slides out when you don't. The original design was pushing my small spools off. Uses 608 bearings like the other idler.
This is a small adapter spacer to widen the idler Filamentalist 80mm idler roller to fit the QuattroBox MMU. I had already printed idler rollers for the Filamentalist Rewinder and it felt unnecessary to print new male and female ones for…
Modified the filamentalist to fit inside an Ikea 365 10.6 L box. Fits in the box with the desiccant holder and hygrometer. Different width inner and outer wheels balance maximum clearance and spool width. Modifications are: - Smaller…
This model adapts the FV3 Filamentalists to attach to the NightOwl. The FV3 mounts have been modified to match the aesthetics of the NightOwl, the NightOwl top plate has been modified to match the hole pattern of the FV3 mounts. The…
The Reprak Mount that comes with the filamentalist sits too high, so I designed a mounting mechanism that works with a 2020 extrusion mounting option BOM Print 2x of the extrusion mount 2x M3x6 screws (M3x8 works fine if you do not mind…
As it is. This model is for the 19mm deep wheel which fits most filament spools, polymaker, ambrosia, matterhackers and so forth.
Modeled this up quick the other night to keep my 3D printing tools from rolling around and being hard to find in the bottom drawer of this US General mini toolbox. Details below, please leave a comment or post a make if you print this!…
Implemented fastening of the front wheels to the printed axle like the rear ones in the original version The design of 2020 Rear Spacer has been changed to add the standart ERCF tag number plate.
Updated the filamentalist idler roller small to support insert for a better engagement.
Optimal for storing dice, bills, coins and more. Shape facilitates transport. Two compartments allow better separation. Clearance came out a little loose , gonna adjust it later. But 2 strips of tape manage to keep things quite tight:…
Base feet to raise the Filamentalist Rewinder off the bottom of the S4 Dryer. Allowing it to clear the fans as well as securing it in place. Simply remove the bearings that are in the bottom of the dryer and place the filamentalist in the…
Remix of NightOwl Deckpanel with LED Mod! ATTENTION: This deckpanel only fits on nightowl verion before 01/07/2025
Add on for the best spool rewinder ever tested. Although you need extra non printable components it is worth to go for it. No tangling, no printed springs and very versatile:…
A heavy-duty remix of FrankenWinder, redesigned with an integrated 1.8:1 helical gear reducer for top-feed setups.
I've had 2 extrusion laying around, unfortunately there were at different length and couldn't mount it to my voron 2.4 at top so i simply created this custom bracket for them, it's required to use “Clip in” option for side mounts while…
Filamentalist Style spool holder to suit 3.8ltr Cereal containers
I designed these mounts for the ERCF and Filamentalist setup I've been using lately after running into some conflicting geometry with the original magnetic panels design by Le0n. I've integrated the same magnet spacing into the corners of…
This model is used as a base/feet for the FV3 Rewinder ( https://github.com/Carrot-collective/Filamentalist_Rewinder/tree/main/Filamentalist_FV3_Rewinder ) inside Sunlu S4 filament dryer. ====== Update 2026/03/25 ====== Based on the above…
Un coupe pizza trouvé sur Thingiverse très original. Besoin de glu pour plus de solidité mais tout s'emboîte. Impression en PLA sans support.
I made a bracket to mount the Filamentalist Rewinder onto an Ikea SKADIS pegboard. You need some 2020 extrusions to run between the brackets.
I tried to create the simplest possible system to mount Filamentalist on Reprack, simply print 2 feet and mount them instead of the base. No support needed, I printed with Voron settings: 4 perimeter 40% infill (Gyroid) 5 top/bottom layer
Needed to create a thicker idler roller as found out the hard way, card board spool was getting stuck on the side of the box.
I found that some of my spools would creep over the outer edge of my set up so I increased the outer retainer by 1mm edge
It prevents Spools in the SAMLA Box with Filamentalist from Tilting and keeps them better alligned. You could either use the printed Screws, or M5x8mm screws and washers. (You need 10 of both) Build Instructions: First i mounted the…
I wanted to mount my filamentalist rewinders in an IKEA Samla drybox, and found the original screw holes finicky since you would need an additional nut for each bolt. So I took the cad and replaced each screw hole with a slot for an…
I'm about to start upgrading my ERCF V2 to the V3 and I wanted to use the filamentalist instead of the Cotton tail buffer this time. I remixed Matt's model for use with the FV3 2020 mount option. I used a 715mm long 2020 extrusion with…
I made the original wheel edge bigger by 3mm in total. So edge 1.5mm bigger.
I created a desiccant box for the Filamentalist Classic. I originally was using a spool desiccant cylinder holder. But you need different sizes for different spools. That got old quick. So better to have one size box for all my drybox's.…
I wanted to add filamentalist to my 3MS MMU system, and I wanted to more cleanly integrate the extruders into the system. This uses the rear mount and rear orientation of the filamentalist FV3 to mount a BMG and stepper. This was inspired…
remixed the 80mm base to fit a humidity sensor for my drybox.
Needed a taller cover for the drybox to accommodate the spool and 80mm rewinder.
I altered the original model so i take m4 screws for the 2020 extrusion mount. The shallow top one should accomodate m4x10 countersunk screws.
A remix of DMan's 5.5mm ball sensor version of the Filamentalist tensioner for the rear load option.
Based off of bullitt168's modification of the Filamentalist V2, the only difference is that I have modified the back to clip onto the repack to prevent forward tipping when loading and unloading. The filamentalist is a passive spool…
Changes compared to the original Coreboxx premium version: Better rubber support. They do not move anymore across the roller Longer edges to avoid spools moving out of rollers Avoid spool cardboard with irregular forms to have random issues
The original Filamenytal design felt like the mounting points were a bit too complicated and cluttered. So I redesigned it to make it easier for the average user to build, using only a few screws and removing unnecessary aluminum…
Some brackets to mount everything ontop of your Voron 2.4
as above, I just added threads to the tensioner base/mount STL.
The Filamentalist No-Drill Cereal Container Dry-Box Enclosure is brilliant. However, my silica gel beads are too small, so I had to create a basket with smaller holes. The original design had holes that weren't easily modified, so this…
I wanted to replace the wimpy spring-loaded respoolers on my Elegoo Centauri Carbon with something that could handle longer rewinds. Filamentalists were recommended by some folks in the OpenCentauri Discord, and they're working great with…
NightOwl Top Panel (Filamentalist) and Bottom Plate split into 4 pieces each so they fit small beds. The largest piece is 115 × 115 mm, so any bed of 120 × 120 or larger works. All the original holes and pockets are unchanged. Assembled,…
As it is. This model is for the 19mm deep wheel which fits most filament spools, polymaker, ambrosia, matterhackers and so forth.
Introduction / Einführung Quick info: I ordered the INDX Toolchanger with 8 Nozzles on Prusa Launch-day. As soon as it gets delivered I will started with the development for the free upgrade to host the 8 spools, of course still on top.…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
I wanted to add filamentalist to my 3MS MMU system, and I wanted to more cleanly integrate the extruders into the system. This uses the rear mount and rear orientation of the filamentalist FV3 to mount a BMG and stepper. This was inspired…
Based off of bullitt168's modification of the Filamentalist V2, the only difference is that I have modified the back to clip onto the repack to prevent forward tipping when loading and unloading. The filamentalist is a passive spool…
Changes compared to the original Coreboxx premium version: Better rubber support. They do not move anymore across the roller Longer edges to avoid spools moving out of rollers Avoid spool cardboard with irregular forms to have random issues
Some brackets to mount everything ontop of your Voron 2.4
Update 01/12/2025: QOL Changes und TPU Roller added + LED Mod, if used on NightOwl! UPDATE 05/16/2024: Modded roller_idler and counterpart, its now easiear to print, build-in support removed. To build this, you need: 8x100mm rods (2x)…
Made a remix so I do not have to use tools to press fit and break one-way bearing. HF081412 One-Way Bearing
Introduction / Einführung Quick info: There is also a CORE CUBE INDX version available which can be found here . Kurze Info: Es gibt auch eine CORE CUBE INDX-Version, die du hier findest. The CORE CUBE is a stackable storage system which…
Noctali et Mentali sur leur coussin en coeur idéal pour offrir à la st Valentin. Mon Instagram: https://www.instagram.com/elvisart08/