Support mural chargeur MiBoxer C4
Support mural chargeur MiBoxer C4
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
- Downloads
- 10
- Likes
- 2
- Rating
- 0
112 models
Support mural chargeur MiBoxer C4
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Requires "tree" supports, no pun intended. If you break off a limb taking them off then your tree gets even better. SMALL BASE version pictured: Tree supports recommended: Powered by Image-to-3D from MakerWorld…
I couldn't find any free models that I liked of the famous Neuralyzer memory wiping device from the Men In Black film franchise, so I made my own. It's nearly accurate in size and appearance to the on-screen version that does not have the…
## Diseño conceptual Esta figura de bebé alienígena presenta un diseño detallado y encantador, capturando la imaginación y ofreciendo una pieza de exhibición única que llamará la atención de todos los amantes de la ciencia ficción. ##…
Refer to the .3mf Orca profile for print settings. Assembly Push the rod through the hinge attaching the body and the head. It should friction fit, but if its too loose try increasing the scaling a bit until it friction fits (or use glue,…
M5 Nut and Bolt designed to fit Radius gauge 1-20 mm by mibla. Bolt has a tapered head and partially threaded to allow flush fit. 4mm hex key required to tighten. I printed mine with a 0.12mm layer height and threads on with minimal…
Ein weiterer Gummibandflieger. Ich habe nach dem zusammenstecken, lediglich am Flügel und Heckflügel mit einem Tropfen Sekundenkleber gegen herausfallen gesichert. Abschußvorrichtung, verwenden Sie ein Gummi Ihrer Wahl, fädeln Sie es…
Suporte para fixação de camera intelbras Mibo *Usar as medidas da foto que ja ira da certo na camera.
EN This is a flexible keychain for keys. It was developed in the Blender program and completely transferred to the Компас-3D program to set precise gaps so that the body can be printed entirely. The star sign was applied using PrusaSlicer…
Xiaomi remote wall holder. Its good for xiaomi remotes for Mibox S1 (check the pilot look to be sure if thats for your pilot). No supports required during printing. I recommend to use screws to mount it to the wall, or some thick adhesive…
Practico organizador de colores impreso en modo VASE usando 2-5 perímetros dependiendo el diámetro de boquilla Recomendaciones: 0.4mm 5-perimetros 0.6mm 3-perímetros 0.8mm 2 perímetros
Simplified MIB Gun for easy printing Use 3-4mm rod or tube for the barrel Category: Toy & Game Accessories
Antenna Mount for 6mm standoffs that come with the Demibot. Antenna poles fit the Foxeer 4+ antennas best. Wide version added, supports bigger antennas like the foxeer lollipop 4+'s image of both antennas has been uploaded Category: R/C…
FPV cam mounts for the new botgrinder frame. Category: R/C Vehicles
¡Trae la vibra de Leonida y Vice City a tu espacio con este set de Jason y Lucia en estilo Chibi ! Diseñados especialmente para creadores, coleccionistas y fans de Grand Theft Auto VI , este paquete digital incluye los modelos 3D listos…
Tingle Amibo! (Don’t let him steal your pictobox) Scale to the size you prefer. (Bigger will print better) You might need to run PrusaSlicer‘s auto model repair for it to print correctly. If you like it and want to see more, please give…
Antenna Mount for DJI O3 Air Unit + Crossfire Immortal Antenna. Credits: botgrinder & barontechnologies Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 80 Filament: Sain…
Länge ist ca 10 cm und die Breite beträgt 8mm Die Zangenöffnung beträgt ca. 2 cm
Der Gleiter mit integrierter Gummibandaufnahme im Unterteil und separater Abschussvorrichtung erreicht beim Außeneinsatz an windstillen Tagen locker Flugweiten von über 20 Metern. Der Gleiter ist trotz PLA-Druck sehr stabil und lässt sich…
protection given by these protectors is huge. snug fit and fixed by motorscrews from beneath. I prefer to print them with 4 solid layers and 7 perimeters in 0.2 with printing speed of 20mm/s. Fly safe and show me your prints ^^
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
Minimalistic holder/stand for MiBand 6 serves for stable charging without tangling all this stuff together. Also, free hanging cables attracts cats, so this gadget can be called cat-protector. You'll need: bolt M3x12 + nut small zip tie…
While designing the Noisy Cricket prop from MIB I thought it would be funny to redesign it to look like Ryobi made it. This is the result.
The existing designs on the internet did not offer enough protection, so I decided to design my own… snug fit and fixed by motorscrews from beneath. Preventing to fold down using the standoffs. I prefer to print them with 4 solid layers…
Karol G - Icono de la Música Latina Este modelo 3D representa a Karol G , una de las artistas más influyentes de la música urbana latina. La figura captura su estilo característico con su inconfundible cabello rojo vibrante, gafas de sol…
The Xiami MiBox is a really nice Android TV streamer, but it does have a really strange shape that makes it not fit any square bracket. I wanted to hang mine on a wall and needed some way to hold it in place so I designed this bracket.…
Universal Gopro mount for the ummagawd botgrinder demibot frame. Yes the geometry is nuked, yes i just slapped some parts together and did a boolean union, no I dont care lol. Yes, it prints. Category: R/C Vehicles
This is a topographic map of the Fish River Canyon in Namibia that I created using https://touchterrain.geol.iastate.edu/ Print Settings Resolution: 0.16 Infill: 10 Speed: 35mm/s Filament: SA filament PLA Plus Scaled down to 50% and…
Printed most parts on an SLA printer. But the base was made on my MK3S (resin couldn't handle the impact so PETG is your friend here). You can probably print all of that on an FDM printer, but it would take a lot of sanding to get it…
# Rosalía - Figura 3D Imprimible Modelo 3D de la icónica cantante española Rosalía Vila Tobella, diseñado específicamente para impresión 3D con la mínima cantidad de soportes posible. ## Características del modelo: - Pose característica :…
R.E.P.O. Head Keychain Simple and easy to print with minimal support under the eyes. Keychain hole is large enough to fit virtually any keychain ring. 3 cm wide, a cute and simple keychain to dangle around your Semibot head (preferably in…
Printed in PETG but PLA is good enough.
work in progress, recommend to print with 5 walls and 50% infil
This is the first remix, have not yet test printed it. I remixed mazyarc's xiaomi mi box S tv support to have a clip to slide onto my tv wall mount at the back of the tv. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Halter für MiBand 5 und 6, für flexible Filamente … bänder lassen sich z.b. einfach einnähen …
Modified brushes for Tesvor vacuums, which prevent the robot from curling up light weight rugs and carpets. The original brushes on Tesvor vacuums like the M1 or X500 are using bend down brush bundles, which cause the robot to sweep under…
This is the complete dump of stuff for a full HDZero Demibot build. It's all pretty straightforward. All parts are made to be TPU except the skids, which are meant for a solid plastic. I used polylite PLA because it's really stiff and…
I didn't like the style of SMA mounts I could find for the Demibot. I remixed this mount I used and liked from the Apex 5". It works well with this style of U.FL to SMA connectors found on getfpv.com and probably other websites. I used a…
demibot clone micro cam thorn mount No guarantee it fits the original!
Vista antenna mount for the new botgrinder frame Demibot_Vista_Antenna_Mount_5mmStandoffs.stl: for standard 5mm standoffs DemiBot_Vista_Mount_6mmStandoffs.stl: For the 6mm standoffs that come on the demibot…
a testament to my OCD need to print stuff that doesnt matter. My Demibot frame has 4 3mm mounting holes for a 20mm flight stack when I used the 30mm holes. This is nothing more than a chunk of plastic to fill them in while leaving enough…
Mount to hold a miboxer c4-12 battery charger on a ikea skadis board.
TPU printed mount for 35v 470 uf cap and spike absorber. 30mm standoff spacing. 6mm standoffs. Meant for the Ummagawd Demibot frame. Added a second version that is pushed slightly forward to allow for more room between stack and cap.
For a conservative style of motorcycling where the experience of riding comes first, I find that a whole phone screen is too much, especially on open roads where a lot of details are not needed. Also, the vibration harm to the phone…
Introducing a streamlined GoPro mount tailored for the Botgrinder Demibot frame. While inspired by an existing design, I've trimmed down the base plate for a sleeker look and enhanced stability with pressure spacers. These spacers, being…
A simple box for the 22 piece amibo card i got from ebay. Tolerant is very close. Depends on your printer, you may or may not need some sanding. My print required some at the corners. Category: Organization
MIBR Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Will recommend printing the parts upside down…
A 3D model of an organizer designed for storing the Niimibot D101 printer and its corresponding label set on a writing desk or inside a desk drawer. This accessory ensures a compact and convenient placement of both components, helping…
Držák zadního světla na koloběžku MIBO na rám. Není nutná instalace zadního blatníku. Frame je z materiálu PETG a BODY je z materiálu FLEX. FLEX (tisknutelná guma) je první materiál který jsem při odrazu neulomil ( občas se prostě nohou…
tv support to hang mibox s tv box on tv made with pla 95%filling took 8g and about 40 min feel free to use it /
OLD port AMI New adapter 5Q0035726E -…
Beschreibung Der MiBoxer C4 Smart Charger ist mit einer Vielzahl von Batterietypen kompatibel, darunter Li-ion, IMR, INR, ICR, LiFePO4 und Ni-MH/Ni-Cd-Batterien in verschiedenen Größen. Diese Vielseitigkeit bringt jedoch eine kleine…
DemiBot accessories mixed from other files. Thanks to all the other file's makers. Buzzer is the vifly v2 mini Use couch with thing:3464034 Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .20 Infill: 100 **Filament:**…
Der Aufbau des Modells ist selbsterklärend. Lege einen Gummi ums Zahnrad und dem Lauf der Pistole. Betätige den Abzug.
Print in PETG with supports, must be a little bit flexible filament, then stick with double-sided tape.
📝 Description / Descripción EN (Primary): Meet Raddy, a new character from the Sprunki 3D Collection designed by Funforma HN! This model is optimized for easy printing, color separation, and fun display. Perfect for collectors, makers,…
Rear light scooter/footbike holder MIBO. PLEASE SUPPORT ME AND THEN DOWNLOAD ! ! THANKS Either click on the advertising banner on my site or use the DONATE button. My web page: https://bobanl.blogspot.com/ You printing holder with…
Two versions, the one I use has the cutout to allow the VTX cable to slip into the mount without removing it from the board. I dont like unhooking the UFL if i can get away with it. slip the cable in the side and button it up with a zip…
Realistic Namibia 50c coin as a coaster This is a replica of a Namibia 50c coin for use as a coaster. The diameter is 10.1 cm (3.9 inches). The back side is flat with 3 round insets with 10 mm (0.4 inches) diameter each. You can glue some…
Demibot battery guard for builds that dont use a gopro but dont wanna destroy batteries now that there isnt a gopro to protect them during a crash. This was modelled around the GNB 6s 1300 HV packs (the pretty purple ones) but im sure…
New version of XANIES light holder for MIBO Master foot bike and other models. Adjusted for better printout. Print instructions Tested ASA material that has greater strength but is quite flexible and CarbonFil ™ (not yet tested on the…
Give other appareance to your Miband4 Charger, more easy for daily use and extend your cable life time. Install mi band base “sliding” in to the printed part, the printed part have a draft angles to keep the base in place. Please follow…
Model is printed in PETG. For my Application, I created a spacer out of clear PLA so that the socket can sit flush with the surface (Just sliced the model in a slicer).
The 540p nano cam is pretty small and tends to get the frame in view easily with it's short length, so I pushed it out in front of the posts with a protective bumper. No frame in view at 25 degrees, might get some at really high angles.…
Designed to print easily and with minimal material. Some support may be needed in the oval slot, but it worked ok for me without. The 1b base has a small feature to hold the wire.
Some people fold a sheet of A4 paper and end up with a crooked little boat that sinks the second it touches the water in the sink, and some people take that same idea and turn it into a full Benchy, complete with cabin, chimney and…
TrueRC Singularity Low Profile Mount for the Demibot. This was designed around these antennas: https://pyrodrone.com/products/truerc-singularity-5-8ghz-u-fl-lite-lhcp-112mm?_pos=1&_sid=2c9e85678&_ss=r This design is to keep the antennas…
Print for the front of the demibot to hold an antenna horizontally inside the frame as well as a sled to hold the RX itself. (I just use double-sided tape and pray, seems to do me just fine so far) Specifically designed for the BetaFPV…
Hero 8 black mount for the Demibot with some durability improvements
You should be ok with any 20x20 mount as long as it has a typical set of rear standoffs at the back If you want to edit it using onshape, you can find it here:…
It is oriented in the ideal way for printing. Print Settings Layer Height: 0.2 Wall Line Count: 4 Top Layers: 4 Bottom Layers: 4 Infill Density: 15% Support Structure: Tree Support Placement: Touching Buildplate Thank you very much for…
Objednal jsem USB-C nabíjecí smart světlo XOSS XR Pro a zjistil jsem, že se prodávají i takovéto držáky na GoPro co vypadají stejně jako držák na to moje světlo. Tak jsem objednal “SPC001C” u kterého psali XOSS compatible, a když dorazil…
This is a simple stand for the MiBoxer chargers of the series C: C4, C8 and C12. I designed it for the C4 specifically, but it should fit all the others. Just scale it if you want to adjust the width. A brim might be needed. Use supports…
Dust tank for robot vacuum cleaner amibot animal, print in 3D because I broke the original!! enjoy!! tested en approuved!!
Původní nápad jak přidělat zadní světlo za pomoci dodávaného držáku na sedlovku. Přes kousek gumy divného tvaru přichyceno za pomoci jedné velké stahovací pásky.
YukimiBotamon Digimon Creature Model
This mount has had the angle adjusted to 20 degrees, beefed up lens guard, fixed some pain-points where the mount would break under heavy abuse, and slightly optimized. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
Modelo de caja técnica modular sin tapa, creado para aplicaciones funcionales y técnicas. Ideal para guardar piezas mecánicas, componentes electrónicos o herramientas pequeñas. Compatible con impresión 3D FDM y fácil de adaptar a…
This mount is for the MiBoxer LC2-ZR2 2 Wires 2 in 1 LED controller. It mounts to the wall or ceiling with 2 M3 screws. The MiBoxer is a tight fit in the mount, so it can be mounted in any direction you want. There are cut-outs for the…
Two colour MI Band 9 stand. PLA printed, some supports needed.
Este es el soporte para la tarjeta con FPGA Alhambra II basado en el soporte de la FPGA Icezum Alhambra . Ha sido diseñado con la herramienta libre FreeCAD en su versión 0.17. La tarjeta se encaja por presión, y permanece acoplaca gracias…
drei verschiedene Querschnitte (2-3 gramm Silikon wird benötigt) 1.5 x 1.5 mm 2.0 x 2.0 mm 2.5 x 2.5 mm
A Little Knife for the Mibro robot it I have not printed it yet but when I do I will adjust it. If you want to make your own Mibro robot accessories the dimensions of the handle are 7 by 7 millimeters.
The model is designed to replace a broken mount for the attachments of the Mamibot V6 vacuum cleaner.
This is an adapter for the charging station "YOMENG" from Amazon. The adapter fits in the Apple Watch charger hole and fits the miband 5/6/7 charger. Print Settings Printer brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…
Xiaomi Mi Band 5/6/7 Charging Stand A practical charging stand for the Xiaomi Mi Band 5, 6, and 7 . This model is designed to hold your Mi Band securely and keep the charging cable in place, making it easy and convenient to charge your…
Tapa para la StreamCam de logitech, con soporte para amiibo
A box designed to be placed over a cable hanging out of a wall that contains a frame designed to fit a MiBOXER ZigBee LED (Strip) controller. Tested to fit dual-white, single color and RGBW controllers (they all have the same dimensions).…
A fun project for the Miband 7 Pro user community.
I was not particularly comfortable with the scooter stand sticking out towards the user during the ride, so I designed a cover which slides up and down on the scooter frame and protects the user from falling on the sticking rod. I used a…
Da bei meinem Moutainbike über die Jahre die Gummibänder für das vordere SKS Shockblade Schutzblech spröde wurde und ich keine Ersatzbänder im Netz finden konnten, habe ich diese selbst neu designed. Zum Drucken mit TPU, 15% Infill…