Search results: microphone

Sort order

1,228 models

P
PrintablesFireDog

Microphone Voucher Box / Mikrofon Gutscheinbox

Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…

Downloads
2,092
Likes
110
Rating
4.95
P
Printablesrj_ruin

Icom HM-207 microphone clip adapter

I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…

Downloads
308
Likes
14
Rating
0
P
Printablesmrusk

Robust RØDE NT-USB Microphone Mount

This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…

Downloads
278
Likes
10
Rating
0
P
PrintablesNoWayCall

Small Microphone Pop Filter / Screen / Shield | (Shure SM58 style Mic.)

Here is a small pop filter for a Shure SM58 type microphone. --- It's probably not the best sounding one but it does the job, it's small, quick to print, easy to realise and in one piece. Update => The empty round version offers better…

Downloads
130
Likes
25
Rating
0

Microphone Boom Arm GoPro Mount

This model converts a cheap microphone boom arm into a positionable GoPro camera mount. Utilizes stock GoPro mounting hardware, and fits all standard GoPro mounts. V1 Pictured. V2 includes improvements to design to reduce filament usage…

Downloads
84
Likes
16
Rating
0
P
PrintablesJoshPlayz

Microphone Holder/Lekato Microphone Holder

PRINT IN THE SAME ORIENTATION YOU MOUNT IT IN, SUPPORTS ON. PRINT IN A HARD MATERIAL LIKE PLA. The diameter of the holder part for each microphone is 37.1mm. It's made for wireless microphones, because there is nowhere to put the wire…

Downloads
58
Likes
6
Rating
0
P
Printablesjrsone

AKG C414 microphone dust cover

This is a very simple model, but useful for me, because I like to leave my main microphones set up at all times. I do want to protect them from dust, so instead of a plastic bag, I think these covers look pretty classy and do the job. The…

Downloads
52
Likes
6
Rating
0
P
PrintablesOliverP

Microphone Holder for SKADIS Systems

I had the original holder for my microphone break, so I made a SKADIS-based mount for it. The microphone itself is a Hama 21671, but many other microphones share the same standard. The mount uses the same upper parts (clip, screw and nut)…

Downloads
50
Likes
7
Rating
0
P
PrintablesGraubart

Steinberg UR22 MK II microphone amplifier bracket under desk mount

This is for the the Steinberg The inner width is 160mm the height is 50mm perimeter:2 infill:15% There are holes for screws to mount it - which i did and would recommed. Normally i use double sided tape - which has sometimes problems…

Downloads
29
Likes
5
Rating
0
P

TD-H8 microphone connector cover

A connector cover for Tidradio H8. When use an external microphone, the original cover is bad, so i design this custom cover, works well with the original screw. I print in TPU and PLA, all other material should works. In files section…

Downloads
16
Likes
3
Rating
5
P
PrintablesNeevoet

Adjustable Microphone Arm

Elevate your recording and gaming setup with my Customizable 3D printable microphone arm with adjustable joints and easy assembly for improved gaming and audio setups. Adjustable The joints can be adjusted in 10 degree intervals where…

Downloads
3,972
Likes
751
Rating
4.88
P
PrintablesAdam Kimmerly

Mini Microphone for QMX, (tr)uSDX, uSDX, KX2, and KX3

BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…

Downloads
3,843
Likes
289
Rating
4.87
P
PrintablesDJMac

Toy Microphone (Multiple Designs)

Kids love to sing and these toy microphones can add to the fun. Another optional for use is the tried and true "whomever holds the microphone gets to speak, while others listen". And of course, there's always the classic "drop the mic"…

Downloads
2,272
Likes
79
Rating
5
P
PrintablesSteven La

Low Profile Microphone Arm

This is a low-profile microphone arm that swivels underneath a monitor to save space. I've been using this for over 3 months, and it's been rock-solid. Fully 3D printed with no supports! All printed hardware can be swapped with M10 x 30mm…

Downloads
1,694
Likes
1,154
Rating
5
P
Printables3DSistem

Retro microphone

Use it as props, award or a simple decoration. For other half load one more model aside and miror it. Glue after its done. Print flat side down, no support, lightning infill for faster printing and material saving.

Downloads
1,376
Likes
82
Rating
5
P
PrintablesRyan1705

Sleek Microphone Stand

Hey all! This is my custom Microphone stand I designed as I bought a microphone that came without a boom or a stand. It should fit most standard shock mounts (refer to the second picture). Do print with a fairly high infill for strength,…

Downloads
1,309
Likes
145
Rating
5
P
Printableskmarty

Microphone clip/mount for Shure SM58 & similar

Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…

Downloads
1,093
Likes
96
Rating
5
P
PrintablesLilMikey

Microphone Holder (for Mic Stand)

Update 5/17: Added a bottom with a GoPro mount. With a couple GoPro arms you should be able to use my Yeti pop filter with this mic holder: https://www.thingiverse.com/thing:4234982 . Update 5/3: Added step file and 1/4" threaded bottom.…

Downloads
1,057
Likes
123
Rating
5
P
Printablesbeekrbonkr

Microphone Boom Arm Desk Clamp Replacement - Scissor Mic Stand Clamp, 13mm Hole

A replacement desk clamp for scissor-arm microphone boom stands. If the original clamp on your mic arm broke or went missing, this is a printable substitute. The hole for the mic arm post measures 13mm. Files included Mic Stand Clamp…

Downloads
980
Likes
91
Rating
5
P
PrintablesLadyKhora

Microphone 3/8" to Camera 1/4" Adapter

Female 3/8"-16 to Male 1/4"-20 adapter. Designed to convert desk microphone boom arm to use standard camera tripod attachments. Print on side to prevent shearing when threading on 1/4" side. Suggest 100% infill for strength. Print…

Downloads
937
Likes
76
Rating
4.83
P
Printablesmk

Female 3/8" to male 5/8" microphone stand adapter

This is a 3/8 inch female to male 5/8 inch microphone stand adapter. It fits a ton of different stands and microphones. It includes a flat screw like cutout so you can easily tighten it. The images show the adapter on the Blue Snowball…

Downloads
924
Likes
30
Rating
5
P
Printablessoundbylaura

Microphone for LUCKY 13, MINI 13, EASY 13, DUMMY 13

No one wants to be left out at karaoke time, including Lucky 13! Based on @DJMac_255353 's Toy Microphone. Colors loosely based on a Shure SM58 with a black stripe for contrast. Brim recommended. Some post processing may be required. My…

Downloads
840
Likes
196
Rating
5
P

Square Microphone Flag

If you're doing a video shoot that represents a brand and you're using a handheld mic, you can display the logos on your microphone using this microphone flag. The interior of the block is filled with foam to help it grip the microphone…

Downloads
818
Likes
46
Rating
5
P
Printablesastrophage

Universal Microphone Stand Cable Clip

This is a replacement part based on the WindTech CC-6 Mic Stand Cable Clip for microphone stands and boom poles. My brother has a set of these from Sweetwater they work great. Eventually a couple ended up breaking, so I designed a…

Downloads
814
Likes
137
Rating
5
P
PrintablesToolmoon

Retro Microphone Table Lamp – Vintage Night Light

Cool 3D printed retro microphone table lamp — a vintage-style night light for music lovers, studio desk or bar decor. Fits the tBulb B dimmable USB LED module. id : be10031a10 size : 138X127X298 mm files : 7 pieces : 10 maximum size of…

Downloads
802
Likes
255
Rating
5
P
PrintablesOstella3D

Streaming Microphone Shock Mount - Optimized for 3D Printing 001

I modified my original Generic Streaming Microphone Shock Mount Reference to improve its printability. Try it for yourself and throw a like if you think it will work well for you. Changes include: Tapered posts, holes, and elastic slots…

Downloads
783
Likes
101
Rating
5
P
Printablesbancroft

Microphone Handle for DJI Mic

This is a mic handle designed to fit a DJI Mic wireless transmitter module. The handle holds the transmitter unit securely by the clip and is designed to fit a foam windshield with a 40mm opening. From experimenting, the cheaper…

Downloads
777
Likes
64
Rating
5

Shock Mount For Fifine AM8T Microphone

Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…

Downloads
727
Likes
79
Rating
5
P
PrintablesFlyAttack

Twist-and-lock microphone toy / prop

This microphone prop / toy was designed to accomodate costumes that need a hint of color to match. This microphone prints in multiple parts so that each section can be in the color of choice. The microphone connects via a twist & lock…

Downloads
723
Likes
85
Rating
4.93
P
Printablessalamanders

Alastor the Radio Demon's microphone (from Hazbin Hotel)

Alastor from the animated show Hazbin Hotel has a staff (cane? wand?) with a microphone on top that helps him channel his powers. After looking at various angles of it, it seemed like a not-quite-screen-accurate interpretation of it would…

Downloads
717
Likes
61
Rating
0
P
PrintablesTimmy

Microphone stand (Fully printable)

If it's a microphone stand you're searching for, you came to the right place! A bit of parts salvaged from : Stand : https://www.thingiverse.com/thing:1993382 (has some nice plugins for the stand if you're into that kind of thing) SM57…

Downloads
702
Likes
60
Rating
4.88
P
PrintablesOlivier Boesch

Microphone adapter from 3/8" to 5/8"

A simple standard microphone stand adapter from 3/8" to 5/8". Made with fusion360.

Downloads
688
Likes
40
Rating
5
P
PrintablesMidy Ga

Microphone stand adapter - 5/8 inch female - 3/8 inch male

Microphone stand adapter 5/8 inch female 3/8 inch male no support needed

Downloads
658
Likes
39
Rating
5
P
Printablesmikiya

Microphone boom arm cable clips

mic cable clips for boom arm (cable:5 mm, arm:10*10 mm) Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 mm Filament: Prusament PLA Category: Audio

Downloads
653
Likes
128
Rating
4.73
P
PrintablesKYZ Design

Printable Pop Filter for Your Microphone

The base part that clips onto the Samson G-Track Pro microphone can be found here: https://www.printables.com/model/219694-samson-g-track-pro-pop-filter Otherwise, you can remix your own adapter base for your microphone. I have a clunky…

Downloads
576
Likes
100
Rating
5
P
PrintablesSaxe

microphone holder for Vtech Kidi Super Star DJ Studio

This is a sparepart for the Vtech Kidi Super Star DJ Studio.

Downloads
560
Likes
21
Rating
5
P
Printableskulfsson

Toy Microphone

My daughter requested a microphone for her pop star costume and I decided to design one for her. I sliced the top grille in Slic3r and printed without any support. As I wanted to do a color change for the shaft and bottom grille, I sliced…

Downloads
524
Likes
52
Rating
5
P
PrintablesGearomatic

Anti-Roll Collar compatible with Shure Microphone

Anti-Roll Collar compatible with Shure Microphone. We could not find the original to purchase. Was designed around the Shure ULXD2 but may fit other models Works with rigid filament, but may be better with a flexible filament.…

Downloads
515
Likes
33
Rating
5
P
Printables3Dn00b

5/8 Microphone screw with 8mm HEX

no remix, but I think it is easier to find that way. I didn't have a 5/8" screw and didn't know where to get one. If my screw is to long just scale up the ring.

Downloads
494
Likes
35
Rating
5
P
Printablesflummer

Microphone Flag

This is a microphone flag to be used with regular handheld interview microphones. I have tested it with my Shure Beta 58A microphones, but it should easily fit many other vocal/interview mics. The OpenSCAD file is made so that it is easy…

Downloads
489
Likes
19
Rating
5
P
PrintablesNoah Stipe

Wireless Microphone Holder

Designed to hold 4 wireless microphones in each holder. Modeled around the Phenyx Pro Wireless Microphone. Print top down and no supports are needed.

Downloads
477
Likes
35
Rating
5
P
PrintablesPeter Farell

Shure sm57/58 Microphone and Headphone Clamp Stand

Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.

Downloads
476
Likes
119
Rating
0

Airbus A320 Cockpit Microphone

Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…

Downloads
470
Likes
34
Rating
0
P
PrintablesHeikit

JBL Partybox 320 Microphone Holder - JBL Partybox 320 Mikrofon Halterung

I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…

Downloads
462
Likes
31
Rating
5
P
Printableskwl1122

Microphone Holder for bass drum

drum microphone holder Layer height - 0,2 0,4mm nozzle Filament PLA or Petg printing with support

Downloads
456
Likes
69
Rating
5
P
Printablessatchmo_021

Microphone Stand

Microphone stand for Audio-Technica ATR2500-USB. Will probably fit other brands as well, since it simply screws on (16mm). This is the first version, and can definitely do with some improvements, happy to hear some of your constructive…

Downloads
454
Likes
50
Rating
4.5
P
Printablesjk_printer

miniDSP UMIK-1 microphone shock mount

An isolating shock mount for the miniDSP UMIK-1 measurement microphone. The mount is intended to be installed on a monopod, tripod or selfie stick with a ¼" or 3/8" screw. It isolates the microphone from a broad range of vibrations, which…

Downloads
454
Likes
54
Rating
5
P
PrintablesInducedRug

Microphone Arm Wall Mount

The original design was developed to be machined out of aluminium. It was discovered that the test print works just fine as a mount. Redesigned the mount to have a higher safety factor at the stress concentration. Recommended to slice…

Downloads
429
Likes
56
Rating
5
P
PrintablesTotti2101

WWE Action Figure Microphone

Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.

Downloads
413
Likes
26
Rating
0
P
PrintablesMakePro

Sennheiser hand microphone color ring ID

Printed this one with 0.25mm nozzle for better detail and function. When putting on microphone is need to be very careful because is very tiny thing so you could damage it. After putting on microphone it works as original! If you like my…

Downloads
412
Likes
43
Rating
5
P
PrintablesVlad Moldovean

Microphone boom arm hodler to monitor arm

A sturdy part that clamps with two M6 screws to the pole of the monitor stand arm 35.5mm pole and can hold one of those boom arms for a microphone that looks like the Pixar lamp

Downloads
410
Likes
82
Rating
5
P
PrintablesEastwest Design

microphone holder

If you need a microphone stand, this microphone stand is a good choice ( This microphone stand is made for microphones with a diameter of 4.5 cm ) Best results found to be using a default settings: Layer height - 0,2 or 0,1 0,4mm nozzle…

Downloads
393
Likes
31
Rating
5
P
Printablesearlmckay

Microphone to Camera Adapter (3/8 - 1/4)

Microphone to camera screw adapter This adapter allows to screw a microphone mount onto a common camera thread. (3/8 - 16 UNC to 1/4 - 20 UNC) Feel free to support my work and leave a tip.

Downloads
382
Likes
30
Rating
5
P
PrintablesDr.Layer

Microphone Trophy

I modified the holes to work perfectly with 2 M3 bolts and mount flush. For the base, i used a dowel connector (depending on your printer settings, you may or may not need to slightly sand the dowel down a bit). If you use Bambu Slicer or…

Downloads
375
Likes
44
Rating
5

Alastor the Radio Demon's microphone (from Hazbin Hotel) - Remixed to print with no supports

Alastor the Radio Demon's microphone (from Hazbin Hotel) - Remixed @salamanders_176168 model to print with no supports needed

Downloads
374
Likes
51
Rating
4.5

Airbus A320 Cockpit Microphone Holder - Captain's side

Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…

Downloads
374
Likes
23
Rating
0
P
PrintablesChopcat Suey

Varioboom (c-clamp mic microphone stand boom arm)

I had the need to mount a USB-microphone and some other accessories to my workplace table. I didn't like what I could buy on Amazon, so I made my own “c-clamp microphone boom” and called it the “Varioboom”. The project grew a bit and now…

Downloads
368
Likes
100
Rating
0
P
PrintablesDampmaskin

Microphone stand v2

A minimalist table stand for your microphone. This version has the same interface as the original version . The base is slightly larger and perhaps better looking. Print Settings Printer Brand: Ultimaker Printer: Ultimaker Original Rafts:…

Downloads
363
Likes
20
Rating
0
P
PrintablesSjb1604

Microphone Desktop Stand

Requires 1 x M5x25mm bolt and nut. M5 nut need to be inserted during printing of Knob v2.stl after layer 28 (0.2 resolution).

Downloads
356
Likes
44
Rating
4.33
P
Printableshygy

microphone holder for shure sm58 top part

This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…

Downloads
353
Likes
41
Rating
5
P
PrintablesNebukadNezzar

Stereo Couple Bar Mount for Microphones (1/4-20 and 3/8-16 threads/inserts)

Length: 180mm. Six models in total. Two bar variants: 1. with 1/4-20 and 3/8-16 threads. 2. with bare holes for (1/4-20 and 3/8-16) brass inserts. Four screw variants: 1. Long screw with 3/8-16 thread. 2. Short screw with 3/8-16 thread.…

Downloads
350
Likes
28
Rating
5
P
PrintablesMakePro

Sennheiser hand microphone stand

I made this stand because of using microphones on daily basis and rolling of them on tables was terrifying! For this design you need: 4x cabinet door bumpers (10mm) 1x furniture leg soft sticker If you like my work please support me. :-)…

Downloads
340
Likes
43
Rating
5
P
PrintablesDeckerEgo

5/8" to 1/4" (0.625 to 0.25 inch) microphone stand adapter

An adapter that allows you to connect items that take a ¼" screw head and use it with a 5/8" screw head commonly found on microphone stands. Useful for attaching things like camera mounts or phone grips to mic stands for overhead or still…

Downloads
340
Likes
20
Rating
0
P
PrintablesINVESTEGATE

INMP441 Digital Microphone Mic I2S MEMS Holder Mount Bracket Cap

Hey, i designed a easy cap for the INMP441. If you want to fixate it, just use hotglue or similar. Leave a like if you like it ;)

Downloads
340
Likes
22
Rating
5
P
PrintablesHyper

HyperX Quadcast Microphone Horizontal Adapter (Reinforced)

A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…

Downloads
337
Likes
19
Rating
5
P
Printablesjake scally

Alastor's Microphone Staff/Cane from Hazbin Hotel (Accurate Size!! Over 4.5 feet tall!)

Hello! Here is Alastor's Microphone/Staff/Cane? from Hazbin Hotel!! Most parts have some method of joinery to make sure the fitment is correct, so assembly is very easy, just requires glue or plastiweld. I personally recommend plastiweld,…

Downloads
332
Likes
56
Rating
0
P
PrintablesMelnikov Sergei

Shure SM57 microphone stand

I've added fastening for a shure sm57 (and similars) to the original model.

Downloads
326
Likes
33
Rating
5
P
PrintablesIguanahotsauce

Female 5/8" to male 3/8" microphone stand adapter

The threadings of the screws: inside ANSI UST 5/8-27 UNS outside ANSI UST 3/8-16 UNC

Downloads
323
Likes
17
Rating
4.5
P
PrintablesOldCoder

Rack mount Yaesu Microphone Holder

Modified to make front panel thinner for Yaesu mic stud. Modified to make pocket deeper to make room for rack mount screw behind mic stud. Remixed from CB/Ham Radio Mic Holder Remix II:…

Downloads
323
Likes
35
Rating
5
P
Printablesmonokeith

fifine K683A Microphone Stand

The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone

Downloads
303
Likes
27
Rating
5
P
Printables3D-drukken

RODE VideoMicro shotgun microphone shockmount

After the shockmount of my RODE VideoMicro broke, I designed a new one that could replace the original Rycote mount. Both PLA and PETG have worked well for me. The original hardware of the coldshoe mount can be used to mount the print.…

Downloads
302
Likes
45
Rating
5
P
PrintablesDaniel Vitanza

C270 / C310 Focus Ring + cover with leds and microphone holes

1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…

Downloads
301
Likes
28
Rating
4.88
P
PrintablesJoel

4inch Kick Drum Microphone Port

I needed a 4inch kick port for my floor tom conversion. Why pay $50+ for a plastic ring when you can print one?! Ive even added a screw so it can be removed/replaced later. It took me a couple of iterations to find a light weight and…

Downloads
300
Likes
44
Rating
4.67
P
Printablesfirstgizmo

Hot shoe microphone tripod holder

All parts can be printed in the given orientation. The TripodSwivelHead needs some support

Downloads
296
Likes
59
Rating
4.67
P
PrintablesaffeOHNEwaffe

Microphone shockmount

Here is a simple solution to protect your microphone from shocks. I use it for a Shure SM58 whit hair ties to insulate.

Downloads
295
Likes
44
Rating
4.8

Razer Seiren Mini microphone. quarter inch adapter

I needed to connect my Razer Seiren Mini microphone to a camera tripod so I quickly made one. It took me 30 minutes to design and print this with help from these models: Mic Microphone screw thread extender. 5/8" five eigths inch. by…

Downloads
289
Likes
18
Rating
5
P

Microphone prop

Was looking for a microphone prop for an upcoming project but couldn't find what I was looking for… so I made one! The sign is separate (and optional) and just holds on with friction - although I jammed some paper in there for a better…

Downloads
284
Likes
33
Rating
4.5
P
Printablesbb.3D

Shure ULXD2/SM58 Microphone Stand

A table top mic stand to keep your wireless microphones from rolling away. Designed to fit the Shure ULXD2/SM58 but likely still useful for microphones of a similar shape. I made this stand so we could have microphones on all of the…

Downloads
281
Likes
31
Rating
5
P
PrintablesZarderxio

Lavalier Microphone clip

Designed this a few years ago to fit a Sure Lavalier mic after the original broke. Inside diameter of mic mount 11.7mm. Remixed from: https://www.thingiverse.com/thing:23325

Downloads
279
Likes
28
Rating
4.33
P
Printablesthall72

Lego Compatible (90370.dat) Minifig Microphone

This model is compatible with the lego system.

Downloads
274
Likes
26
Rating
0
P
Printablespchoisel

Microphone Echo Shield

Protect your microphone signal from part of the echo of the room. Print : 2xSidePanel 1xFrontPanel 1xMicrophoneHolder Buy : 4xM4 10mm screw 4xM4 self-locking nuts 3x25x25cm soundproof panels I printed the panels on their round side, with…

Downloads
273
Likes
69
Rating
0
P
PrintablesElkwood

SHURE SM58 Microphone Replica/Prop

A printable 1:1 model of the Shure SM58 microphone. Designed to help prototype a custom grip. Could also be a prop.

Downloads
272
Likes
15
Rating
5
P
Printableso.bostik

Clarinet/Flute Microphone Clip for T.bone Ovid CC100 or DPA 4099

Clarinet/Flute Microphone Clip for DPA 4099 or T.bone Ovid CC100 from Thomann. Uses double-sided velcro for mounting.

Downloads
270
Likes
18
Rating
5
P
PrintablesMrENG

Cubical Microphone Flag

Using the Microphone Flag allows you to place your logo on the mic. This is an easy to print cubical mic flag. Print with No Supports. After printing, place a foam sponge with a path in the middle to grip the mic, and insert the cover to…

Downloads
259
Likes
10
Rating
5
P
PrintablesWatchMonster

YetiCaster Microphone Boom Arm Desk Clamp Replacement

I misplaced my original desk clamp that came with my YetiCaster boom arm. It's easy to find other C-clamps, but it's NOT easy to find a clamp that fits the silhouette of the base of the arm. Attach some self-adhesive padding to the end of…

Downloads
249
Likes
17
Rating
5
P
Printablesjk_printer

Desk stand for Lavalier / Lapel clip-on microphones

A modular desk stand for Lavalier-type clip-on microphones. The stand comes in three parts: Base, arm and replaceable mic clip. The arm is available in 200 and 250 mm length and clips into the base - no fasteners or tools required. I used…

Downloads
248
Likes
23
Rating
5
P
PrintablesMat May

t.bone ovid CC 100 and pencil mic holder for cello and double bass DPA4099 instrument microphone

Print the cello and double bass adapter with TPU with 100% infill. I used Filaflex 82A For the pencil mic adapters both PLA and PETG work. No supports, only the 170 version doesn't print very nice but is still okay. For the cello, my…

Downloads
248
Likes
11
Rating
0
P
PrintablesTomasz Krasoń

Microphone box

his 3D model is a sleek and functional microphone cube holder, designed for those who need a professional and customizable solution for holding and branding their microphones. The cube features a practical open structure that can securely…

Downloads
244
Likes
13
Rating
0
P
PrintablesSerentos

HyperX QuadCast Microphone Horizontal Adapter (V2)

I found the height of the QuadCast on the stand to get in the way of my monitors. This makes the overall height much lower, and allows for more clearance under the stand if you want to bring it forward under your keyboard. Uses all the…

Downloads
240
Likes
25
Rating
4
P
PrintablesKajasX

JBL Wireless microphone holder with 3/8 thread

I was looking for a holder for JBL wireless microphones. These mics are thick, so I had to draw my own mount. The print consists of two parts and they are connected by an M6 screw. I printed the holder from TPU and the other part, in…

Downloads
240
Likes
7
Rating
0
P
Printableso.bostik

DPA/t.bone Ovid microphone holder for accordion

Another variation of t.bone ovid/DPA microphone Intended for the left/bass side of accordion to attach the microphone to the accordion belt. Intended to use with this ebay cable organizer .

Downloads
234
Likes
12
Rating
0
P
Printablestato_713

Microphone raising trophy, second model

Originally published here: Microphone raising trophy, second model by tato_713 - Thingiverse I made this as a reward for the first place of a freestyle rap contest, much like my first trophy model . Originally it had graffiti-like…

Downloads
233
Likes
16
Rating
0
P
PrintablesKevin Wong

On Stage Stands Microphone Cable Clips

I designed this for the On Stage Stands Tripod Boom Microphone Stand (MS7701). More information available here . Category: Music

Downloads
233
Likes
40
Rating
5
P
PrintablesSimon Jolmers

JBL partybox 310 microphone holder.

A click-on microphone holder for JBL wireless microphones to be easily carried together with your JBL Partybox 310. No support nor brim needed when printed on a side. made with tinkercad.

Downloads
232
Likes
16
Rating
5
P
PrintablesApollo16

Shure SM-58 Microphone tray

Designed to package or display Shure SM58 Microphones. No supports required.

Downloads
229
Likes
41
Rating
5
P
Printablesoctosomething

ESP32 mini with microphone case

Case that fits ESP32 mini board and INMP441 microphone with wires inside

Downloads
228
Likes
29
Rating
5
P
PrintablesMarcus Voß

Fifine K669b Microphone Desk Stand

Desktop stand for the K669B Microphone

Downloads
227
Likes
14
Rating
5
P
Printablesvictornpb

Replacement Sleeve for a stable Microphone Arm Stand

I got one of those cheap microfone stands that you can clamp on your desk, and where the arm and the clamp meet there's very bad plastic sleeve that has way too much play. I designed this sleeve that has a very tight tolerances so it…

Downloads
225
Likes
62
Rating
5
P
PrintablesDJMitch117

Tall Elegant Microphone Desktop Stand (Blue Snowball)

A tall, simple, stand for microphones that use 5/8"-27 UNS threads, like the Blue Snowball. I thought the stock stand was too low, and I wanted a stand where the mic was close in front of my mouth, not below me. The stand is slim, but…

Downloads
224
Likes
16
Rating
0
P
PrintablesSpitzi

On-Table Microphone Stand for Philips Speechmike

This is just a tabletop microphone stand for the Philips Speechmike. If you are dictating reports with voice recognition using the Speechmike, and you are tired of holding the microphone with your hand… try this stand and free your hand…

Downloads
220
Likes
9
Rating
5