Counting matching models…
(Yet Another) SD/microSD card case with the rough XY dimensions of a credit card or Raspberry Pi Print instructions Added a tray with 1 SD and 7 microSD slots. It's not as well-tested as the 2SD/5uSD tray; the uSD slots might be tighter.…
A box/holder for your SD cards! It holds up to 12 microSD cards and 3 full-size SD cards. It also has an integrated lid connected via a print-in-place linkage, which latches securely shut to ensure your SD cards won't fall out on the go.…
Remix from the awesome print in place "Hinged Sd & Micro SD Card Box - 16 Slots - All In One Piece by 8u9o" https://www.thingiverse.com/thing:3611322 Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution:…
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
Credit card sized SD and microSD card holder. 15 Jan 2021 update added SD only and microSD only holders added stackable versions of all holders 24 Jan 2021 update minor design tweaks 3mf file added
A stylish pen holder inspired by the design of a V8 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
| BASIC DESCRIPTION | it is a remix of a model found here: https://www.printables.com/model/20415-sdmicrosd-card-case https://www.printables.com/model/23326-sdmicrosd-card-case-snap-fit this remix has 8 slots for microSD, and one for the…
This holder can hold up to: 14 USB-Sticks 5 USB-Stick Lids 8 SD-Cards 10 Micro-SD-Cards 6 USB-C Adpater (Micro USB to USB-C) Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15%…
This is basically what Zack mentioned in the video. I attached the Fusion360 file so you can go nuts with it. This upload contais a 1x3 and 1x2 Model. Update 2023-01-04: Added versions without the magnetholes in the bottom, because its…
A case for up to 32 memory cards.
Just a very simple SD and micro SD card holder that fits into a 1x2 gridfinity slot. Space for 10 SD and 16 micro SD cards. Added 13.09.24 - SD cards only - 15 SD cards.
It is difficult to open the case, perhaps the locking protrusion should be made 0.4 mm rather than 0.5 mm. The cards come in tight, they do not fall out of the case as in other models. In the photos, the model is printed from PETG, the…
Nintendo Switch Kickstand / MicroSD cover (Improved)
VW T1 Bus Pickup Pen / Desk Organizer USB SD microsd
Holds: 7 (+ 4) MicroSD Cards 4 Standard SD Cards up to 9 USB-A Memory Sticks depending on size 90 degrees, angled or mixed configuration Added files for another version that also supporting USB-C this second version holds: 7 (+ 4) MicroSD…
Estuche para guardar tus tarjetas micro SD y que no se te pierdan.
Edit 9/25/2023: Per the comments, I have revised the micro SD slot to not be so tight, but snug enough to hold the sd card. Additionally, the slot will now only allow the micro SD card to go into it half-way, making it easier to pull out.…
Durable and practical storage case for MicroSD cards and adapters This rugged MicroSD card case is designed to keep your storage media organized and protected from dust and sand . It is ideal for safely transporting or storing MicroSD…
MicroSD Card Wallet by aerobatflyer is licensed under the Creative Commons - Attribution - Non-Commercial license.
This is a micro SD card holder. Depending on the adapter you need for your PC, you have to select the right bottom part. Here you can find version 2 of the holder. I've redesigned both boxes for easier opening and to fit the new adapters.…
1x1 Gridfinity 9 SD + 4 MicroSD Card Holder for storing memory cards. I couldn't find one that was quite the size and shape I wanted, so just made my own. Found this useful stacked on top of another simple 1x1 bin in my drawer.
My second attempt, designing a storage case for 4 micro sd and an sd card or sd card adapter. This version is similar to the original, it uses a little more plastic, but gives a more solid fill when handling it. After printing, it may be…
A stylish pen holder inspired by the design of a V12 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
I've been using these card grips by FH for some time and now recently i accidentally broke off one of my SD cards, destroying it beyond repair. The regular grip creates a relatively long lever so if you hit a card that is plugged in…
This is just a simple update to fix the too tight tolerances on the MicroSD part of this case. I updated from the scad files to increase the size for the MicroSD from 11mm to 11.1mm. I find that worked great for my varieties of microsd…
Overview: The 3D-printed slim microSD card holder is designed to store up to 12 microSD cards securely and stylishly. With its modern look and honeycomb pattern, this holder is both functional and visually appealing. It’s an ideal…
A tiny 4x MicroSD holder you could hang to your keychain very easily
With this and a few keystone jacks you can embed a Linux SBC (rpi) in your project and never have to crack the box open to service it. Print panel side down, supports very required. A 0.3mm layer print comes out quite usable. The panel…
A compact USB, SD-card and Micro-SD-card holder. The included 3mf and gcode files use Prusa Slicer's “height range modifier” feature to get 0.2mm layer height from 0-13mm then it changes to 0.1mm layer height from 13-17mm. This produces a…
Say hello to the BEST Gridfinity SD Card/MicroSD Card/USB Holder you will find! This 1x2 model makes use of available space and allows you to use the same unit to store SD Cards, Micro SD cards and USBs (or any combination of these) as…
--Update 12/09/2017-- Updated both models for wider tolerances. Cards should fit better now for everyone. Had them really tight just for my printer settings. --Update-- Updated with model including microSD slots. SD card holder for the…
loved this case but the little knobs whore out almost immediately so I made it so that the cover has a nice and lasting snap fit Print instructions Print just like the original
Remixed to fit Multiboard. Tight press fit. Printed at 0.2mm layer height, 3 wall perimeters.
I really like Strider460 's SteamDeck insert because it's gentler on the cord of the charger, but I also wanted some slots to hold MicroSD cards. So I created this remix which replaces two of the SD card slot with 6 MicroSD card slots. I…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……
Wanted a way to organize my MicroSD cards in my camera bag. Lots of credit card sized holders out there but they were bulkier than this one and often included spots for full size SD cards as well. This at 70mm x 40mm x 2.2mm is just the…
The cards fell out of the original, so I redesigned it so they wouldn't fell out that easily. I added a friction lock so it won't accidentally open. Took a while to find the sweet spot for that one! Buy me a beer? :) Litecoin:…
*************** UPDATED B-Model .stl 2-28-2023 The “B” model variation of this file moves the SD card holder slightly right and adds a 2mm pass-through hole that perfectly aligns with the back-edge of the micro SD card slot. This allows…
Multipurpose Holder USB-A - 6x USB-C - 8x HDMI Type D (aka Micro-HDMI) - 2x SD Card - 8x MicroSD / NanoSIM - 4x horizontal & 5x frontal Print instructions Successfully printed using the Prusament PLA Prusa Galaxy Black. Printer: Prusa…
I wanted to organize my various storage cards (SD, MicroSD, and USB) and I found this really clever design from user iomaa on thingiverse. However, I wanted to customize it a bit - more slots and a logo for example. I started by trying to…
Altoids insert for 12 SD card & 12 MicroSD holder
I needed a gridfinity SD card holder for my under desk drawer. The height is limited so all other available holder won't fit. That's why I created this one. But of cause you can use it in all other gridfinity grids! Check out my matching…
No supports and rafts required. I printed with %10 infill. Look of model on solidworks:
I loved the design from Monkey3d, but I wanted some more storage for SD, microSDs, and USB sticks. It took a few tries to get the angles for the card storage right, but we eventually got there! Total size is 94mm (W) x 98mm (L) x 88mm (H)…
4x4x3cm SD card box with hinge
Simple holder for USB sticks, SD & MicroSD Card and, Adapters. Printed with PLA on Prusa Mini+ 0.4 nozzle 0.2 layer height ("0.2mm SPEED" profile for Mini+)
This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a…
Holotape microSD card storage
#1 of Gamerant's “10 Free 3D-Printed Steam Deck Accessories to Check Out” https://gamerant.com/best-free-3d-printed-steam-deck-accessories/#secure-microsd-card-holder-6-slots A quick and easy to print microSD card holder for the Steam…
By re-orienting the card direction I've made room for 8 total cards, plus a small bin that also fits a cheap micro-sd to USB adapter I got online a while back (Brand name “Everything but the stromboli”, I don't get it either.) The little…
Introducing the simple microSD Holder, a sleek and functional design that is perfect for keeping your microSD cards organized and protected. This 3D printable model is designed to hold up to 18 microSD cards, making it perfect for…
i made a case for an insta360 x3 that holds two batteries and 4 micro sd card. it fits the insta360 x3 with the sheath on for some added protection for the lenses.
This is a remix of "Question Block Nintendo Switch Game Cartridge/Micro SD Card Holder" by Elitecgi that's over on thingiverse . I changed it so that the center of the block is it's own part. This way, you can take my card holder model…
This is a fully re-modeled build of a MicroSD case inspired by Kozalakis's one on Thingiverse , borrowing some ideas from Kroki's remix of it . This version relies on fairly close tolerances, so it may be a bit temperamental on some 3D…
Loved the wallet made by aerobatflyer on thingiverse , but needed it to hold my SD adapter as well. Second ever model, so I'm lowkey proud of the modifications I made. Ask me if you want some other configuration and maybe I'll make it.…
Print the TEST version to check tolerances. Open .scad file in OpenSCAD, customize number of rows and columns. The tolerances can be adjusted in the “size” sections for a perfect fit.
This replaces the inner mount for toniebox battery with one that can additionally mount a MicroSD extension slot. - No glue required! This is highly helpful if you are working with teddybench or teddycloud:…
Three card MicroSD holder that fits nicely between the mounts for the JSAUX Modcase Steam Deck case. When the kickstand is installed, the holder is completely covered. In the pics above, I've just affixed it with some double-sided tape.…
Simple MicroSD card box storage with hinges (print in place). I tried printing with Ender3 S1 PRO and Prusa MK3S+, and both were great. Wait for the model to cool down then you can rotate the hinges.
This is my take on the generic gridfinity usb holders, with (IMO) better tolerances. modeled from scratch in F360
SD / MicroSD Card holder Gridfinity tray This holds 10 SD and 10 MicroSD cards in a 1x1x3 Gridfinity tray.
Easy to print, easy to carry multiple SD and Micro SD cards securely. Print instructions Best to print with Brim and support for plates. 0.15 quality print recommended.
Prints in a few seconds and saves your sanity inserting the sd card. Its designed to fit in tightly, maybe print a few different scales (+- 1-2%) at once if you are unsure about accuracy. settings: quick and easy/v1: 0.28 first layer, 0.2…
This is a remix of Lalo_Solo's "USB SD and MicroSD holder for wide USB sticks" but in a smaller form factor and a little
This is simple desktop card notes box up to 80x80x50mm inside. Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders. You can easy print it without…
A SD/microSD Card holder made to look like a 3.5" floppy disk modeled to match dimensions as in ECMA-125 90x94x3.3mm The shutter (top door) is the handle of a sleeve that slides out to fit one SD card and 6 microSD cards. i wanted to stay…
Three storage boxes based on the Gridfinity 2x1 footprint for: 12× USB sticks 7× SD cards + 2× SD card cases + 8× MicroSD cards 2× Sony Alpha A7 batteries Drei Aufbewahrungsboxen auf Gridfinity 2x1 Basis für: 12x USB-Sticks 7x SD-Karten +…
This is v2 of my microSD card holder. Depending on the adapter you need for your PC, you have to select the right bottom part. As the adapter for USB-C got smaller, the box is smaller as well. For standard USB the box is a little taller…
I preferred to not have text on Anton's design. Slapped together in 3D builder in a couple minutes. It'll work.
Introducing my All-In-One storage case designed to keep your digital files organized. Perfect for photographers, videographers, and anyone who needs to keep multiple digital storage devices in one convenient location Compact size easily…
Small case for storage of 4 micro SD and one SD Card or SD card adapter. Update: New version https://www.printables.com/model/193255-mini-microsd-card-case-v2 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
I changed the original f3d file to increase the microSD slots and decrease the regular SD slots. White bin is SUNLU PLA+, lid is Overture Transparent PETG. 0.2/0.4mm layer/nozzle on X1C.
This replaces the bottom cover for toniebox with one that has a slot for MicroSD extension cable. This is highly helpful if you are working with teddybench or teddycloud:…
Slim and tiny storage for 6 micro SD cards. It is made as small as possible to completely seat 6 micro SD cards and fit into tight pocket of camera case or hard-case of your favorite handheld console. Latch mechanism does not bind and…
Purpose. I'm quite satisfied with the C001 Micro SD card holder and case at home but I found that it is too big and heavy for bike touring trips where small size and weight are really important. So I designed an extremely slim and compact…
If you're anything like me you have more than 1 SD card laying around on your desk. This Modular and Discrete SD/MicroSD card Case allows you to neatly package away your cards, leaving them neatly for when you need them next Super easy to…
This small SD/microSD card box combines three modifications I've seen other people use: An “improved hinge” that supposedly prints better. Replacing the external handle (more like a little nub) with a small opening to aid with opening.…
This is a desk organizer/holder for USB flash drives and microSD cards. Takes up to 8 flash drives and 5 microSD cards. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a…
I wanted a USB holder to live in my desk drawer that mixed high density with ease of access, as well as versatility. This holder can hold 12 USB devices, 12 SD cards, or 28 MicroSD cards. I find its density is low enough that it's still…
make the original design compatible with JSAUX upgraded dock
This is a small parametric rework of Guido's model to allow some customization using OpenSCAD : Swap the keychain loop to the other half or remove it entirely Change the size of the keychain loop Swap or remove the inset logos Printing I…
Specifications: Dimensions: 100 x 70 x 11mm 11 Micro + 1 SD card slot or adapter Uses 8 6x2mm or 6x3mm Magnets Print Settings: Supports: none Infil: 15% Perimeters: 3 Brim: none
Hi, this is small travel box for 16 microSD cards. The microSD on the lid is printed separately and glued. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 20% Filament: Plastika…
This is simple desktop sticky note organizer (80x80x50mm inside). Best fit typical 3'' square cards. Includes two pens holders, two USB drive holders, three SD cars holders and four microSD cards holders and a place for the USB caps (or…
I originally designed this media storage organizer to be made on my X-Carve CNC Router, but had a few people ask me for the .stl file, so here it is! This media storage organizer is designed to hold 35 SD Cards, 15 microSD Cards, and 18…
My version of the JSAUX ModCase has 3 plastic tabs on each side for the stand mount so the original version of this does not fit. My guess is that i have a newer revison of the ModCase that made the original design not fit. so i made a…
I saw another attempt to remix the backplate with a MicroSD card, but that version was quick and dirty and did not adhere to the original design of the New 3DS. I did the remix from scratch and did it to better conform to the shape of the…
A stylish pen holder inspired by the design of a 6-cylinder car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk…
A stylish pen holder inspired by the design of a V6 car engine block. The EngineBlock Holder is both functional and visually striking, making it the perfect accessory for tech enthusiasts and car lovers alike. Ideal for your desk or…
Remember: This model is not intended for the PicoStation PCB, but rather for a PCB-less installation (such as this one: https://www.reddit.com/r/psx/comments/1m4h7i3/wired_no_pcb_picostation_install_on_a_pu18_ps1/ ). The MicroSD to SD…
Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% /////////////////////////////////////////////////////////// https://www.paypal.com/paypalme/satch5150…
Previous Version A remake of my previous data holder model with extra space for USB flash drives. Click here to view the original design if it better suits your needs.
NOTICE: This was designed to be the thinest adapter cover that will still allow for a USB connection using adapters. This is not a part for the faint of heart. It does require some effort to get the SD Adapter to line up. Folding ribbon…
Printed in PETG it's very tough . You can get the clasp and hinge from the original model. In addition, the top has a bump to prevent the cards to get off its slots when the box is closed. Keep in mind that when assembling it. You may…
This tool was designed to make changing MicroSD cards in a GoPro a lot easier. The MicroSD card slot in the current generation GoPro has a tendency to launch cards across the room/field/car. If you avoid ejection it can be a bit tricky to…
This is a case that will hold ten microSD cards and a small USB card reader (or I guess technically eleven cards if you keep one in the reader). I designed it around the SanDisk model that I have. I believe it is model number…
A TF card / microSD card storage slot to store your Steam Deck games, giving you more games on the go. Download the .STEP file to create your own accessory.
Designed with Sketchup make 2017 + BoolTools 2 in ~1.5hrs Printed with DMS DP2 "cheap Chinese 150$ 3Dprinter" Print time ~45minutes with raft - speed ~ 40mm/s Model doesn't require any special treatment before print 79mm x 60mm x 4mm…
![Multipurpose Holder [USB-A, USB-C, HDMI Type D, SD, MicroSD]](https://media.printables.com/media/prints/31807/images/313387_b0da4114-99ad-4cdc-b60e-9467a88a80c6/multipurpose_holder_2020-may-16_09-19-05pm-000_cu.png)
![Tool-/Pen-/SD-, MicroSD-/USB-holder set [modular] - deskorganizer - boxes -- picatinny- easy-to-print version](https://media.printables.com/media/prints/62976/images/1972577_2b218f00-1613-4bdf-9793-e1fceda2a5e9/2022-05-29-14_04_24-autodesk-fusion-360-personal-.jpg)
