MicroSD Card Puller for GoPro Hero 9/10/11/etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nifty little tool to eject and grab the Micro SD card out of a GoPro without removing the battery
- Rating
- 4.4 / 5
- Likes
- 35
- Downloads
- 192
- Makes
- 5
- Views
- 719
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This tool was designed to make changing MicroSD cards in a GoPro a lot easier. The MicroSD card slot in the current generation GoPro has a tendency to launch cards across the room/field/car. If you avoid ejection it can be a bit tricky to grab the card out of the slot, particularly if it's in a frame.
One side of the tool has a flat end which can be used to trigger the ejection spring. Flip the tool around and it clicks onto the top of the MicroSD card so you can safely pull it out.
The tool can be used with other devices but not sure if the clearances would work.
I printed it in petg at 100% infill and 0.2mm layer height on my Prusa Mini and it took about eight minutes. Orient it the obvious way and there are no supports.
If you like this please consider buying me a coffee! https://ko-fi.com/daveomatic