116 models
Notes: Add a color change at specific height for different colored frosting in your slicer. Joints have 0.2mm tolerances and print well on Prusa Mini+. If your joints are fused, adjust printer settings to compensate - or break those…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
A puzzle illustration the Missing Square illusion, sometimes incorrectly called Curry's Paradox. Print with or without the tray. Arranged one way the pieces makes a complete 5x13 triangle. Arranged another way the same pieces makes an…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Losing a piece of your puzzle is annoying. Even though you know the piece is gone, it doesn't feel like the puzzle is finished when it's possible to put the last piece. If you have a 3D printer, the solution does not have to be far away.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Every time we put our Cuisinart Ice Cream churn away we cover the top with a piece of plastic wrap. Once we finished our last batch of strawberry ice cream I decided to remedy the missing part by designing and printing a cap for the…
Print approx. €69.36–€84.77 excl. taxPreliminary estimate for one variant
Gymtastic Tray to store all heads for fast access. The piece that should be in the box from beginning! No support needed. I printed it with 0.6 nozzle because of the speed. Also can hold the cable.
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed this for DUMMY 13 goes to COMIC CON - Assasin's Creed. You may also find them useful for your project.…
Finally finished my insert for Lost Ruins of Arnak by CGE, plus BOTH expansions. It was a tight fit - might be too tight for some boxes, and there are a couple of bits I'd have liked to do better (the deck boxes were a real compromise in…
Great puzzle that is easy and fast to print. Use up your small quantities of your different colors ;-) From Wikipedia The missing square puzzle is an optical illusion used in mathematics classes to help students reason about geometrical…
I used my previously published and well-tested parametric Duplo Brick model and after several failed attempts I think I found the optimal dimensions for a print-in-place Duplo Hinge Brick. It lives in two forms: Hinge Plate and Hinge…
Modeled and printed this as a gift for one of my best friends who I met through Garrys Mod many years ago. I wasn't a fan of how the existing models on Printables and Thingiverse connected the letters together; this one has a slight…
Dazzle your students with mathemagic tricks! Included in this collection are two related puzzles made under a Public Domain license. The first is an infinite chocolate bar puzzle that made its rounds in viral media some time ago. The…
Actually it's not a remix because I made it completely by myself. but wanted to link the other 4 2d art of Maggie made in Fusion 360. Homer, Marge, Bart and Lisa you get from the link i attached. i print them with a 2mm white base to be…
This is a replacement car for a missing part in the popular logic game Rush Hour. The model is almost the same as original piece. If the fit is too thigh on your board, adjust the wheelbase by scaling the model on a single axis.
3D scan of Shoulder Blade Scan - Scapula (Right) Missing Coracoid process! (part of the bone is missing) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection…
No more running back and forth to the cupboard for the required tools. Keep all them all with you, while cleaning. Features: Holds 2 tools to the Dyson Wand Incorporate the 2 keys required to open the brush head (the ones that Dyson…
The missing spacer for the B axis.
The 4 main pieces form a large right triangle in one configuration. When rearranged, the 4 pieces apparently form the same triangle with one piece missing. The secret of this puzzle involves Fibonacci numbers. There are many videos online…
cut the Stack Version
When I printed the nice “SANDING DISK STORAGE BOX AND LID” by Peter H (a fellow V1 Engineering maker), I scaled the box vertically in Cura because I needed it to be taller. In addition to the scaling feature, I also made a “P40” divider…
I wanted to be able to carry my Vision Pro in a camera compartment of my Peak Design Everyday Backpack. I felt that any of the Vision Pro cases were too bulky when I already had protection from my backpack. All that was missing was a…
Dudd / Missing Notches Interlocking puzzles by Stewart Coffin (STC #129 / 129-A) Dudd and Missing Notches are two closely related puzzles by Stewart Coffin. Both have the same objective: assemble six burr pieces into the configuration…
Easy and simple to print without supports. Take pressie away in the tube and place the closure after cleaning te nozzle of your tube.
I bought this plug and it needed the bottom half, so I designed it in Onshape.
It’s a slightly modified version of the CS charm collection, suitable for use as a keychain or similar accessory.
This is a capture of an angel statue using the Einscan-S. This capture used the turn-table. It took 3 rotations, one standing up, one facing down and one facing up. No touchups were done to the resulting stl file. As you can see the…
Was missing this one, and someone asked for it :) Hope it helps, also hope it fits, didint test myselef yet. Stay frosty! All hand down to Chris Borge (Original creator or RSMM cnc) Having fun putting it together and making a list of…
Note: Print 7 copies of the piece to make up all the required pieces of the puzzle. Can you make a second cross just out of 3 pieces? Happy re-arranging. Credit to the original designer: Lucie Pauwels
Many of the builders of Chris Borges awesome model ‘Open Lathe V1’ wished to have a hole in the glue spacer, so here is it now. This is a part you only can use for the remixed model https://www.printables.com/model/1048400-open-lathe-v1
A simple geometry illusion, rearrange the pieces as shown in the pictures to make the gap in the middle appear or disappear. It may be a bit of a tight fit in the configuration with the open but. Print x2 copies of the “L-Piece” Print…
It is a common issue with the Apple Magic Trackpad that the rubber feet get lost or they just degrade over time. You can replace the missing foot with this print. Print from TPU or other flexible material. The first layer pattern should…
Easy and simple to print without supports. Take pressie away in the tube and place the closure after cleaning te nozzle of your tube.
Height as original. Clicking good. For Apple Magic Trackpad A1339
Just a generic stove knob with fairly wide compatibility. You may have to adjust the dimensions of the shaft 'well'.
14MM Missing E spacer for Antikythera Mechanism by FreddyZ
This is the check socket file to see if your residual limb is a compatible size and shape to work with my device. the model as it is, is for a left hand. if you are needing to build a right hand, mirror the model in your slicing software.…
Just the one so far - more to follow? ok we're up to two
Missing Square Illusion Simple print
Added STEP files of what I modified and Solidworks files for people that have it.
Print 2x 99780 in grey as per the original models parts list. Double check the scale relative to the original pieces to ensure fit.
You know how it goes – pieces from every Montessori toy start disappearing after a while. You haven't modeled anything yet, but you're looking to see if you can find the exact STL with the dimensions you need? Consider this a huge…
In an era long ago, when facism and racism (wtf, world) were still not done, I bought a Leatherman Tread (22mm) to connect to my Smartwatch(20mm), but it never happened. After 10 years, due to 3D printing, I am finally able to connect…
A remix of one of HribaDesign @HD_218561 containers. This Hex container measuring 250 x 100 mm will fit on most print beds but has one of the ends removed, allowing longer kitchen utensils to be placed in it and overhand one end in a…
Have you lost one of your peg knobs of your KALA Ukulele? Here you go...
print flat on the plate and use a bit of glue and it should fit in the helmet pretty well.
Lately my son and I have been playing with brain teasers and optical illusions and we came across this illusion recently on the internet. Essentially, you've got 5 pieces that fill a specific area. You take one piece out, but the…
D2 part Category: Other
I'll extend the model with new parts as I create them. All are compatible with original Cuboro Cubes. I have no affiliation with Cuboro at all Speed curves Usable as curved speed elements, or to create tunnels for level changes that are…
You've probably seen this puzzle before. There are four pieces, in this version clearly marked with 1cm grid, which together are placed inside a simple base to form a triangle with a 1cm3 hole when assembled. However, if you put the…
Two piece heart necklace with matching pieces! For you and your lucky other!
Holds 10x 6mm bits (most are actually 6.3mm), a presta to schrader valve adapter and a missing link. Model includes a 0.3mm “shrink factor” for printing in hard TPU, but this can be adjusted in the in included F3D file. Included 2…
Added a face to the back of the model to be properly 2d and not just a shaped plane. If you like what i do, please consider throwing a few breadcrumbs my way :) https://ko-fi.com/duckers
There are holes only in two directions in the ikea mount, i've added a third! Category: Replacement Parts
There is a missing mount trim from Ptashek's mount kit for the W124 Sacco panels, so here is the addition. I personally print in PETG, it doesn't need supports.
Split it up, removed logo, added in press together and cut a hole for the wire.
This 3D printed globe was designed by MSF Missing Maps team in Czechia as a gift for mapathon organizers, Missing Maps champions, and validators in the winter 2024/25. About Missing Maps: Missing Maps is a project led by a collective of…
My wife's family has been into jigsaw puzzles for quite some time. So we not only have puzzles from my wife's childhood, but we also have vintage wooden puzzles that belonged to her grandmother and even another family before that. As you…
Update Dec 2021: Added a camera-only variation for ultimate aerodynamic speed. Thanks Bambusgott. Edit again: now added a completely blank version too. Any other requests welcome. Part 3 in my make-the-Ripper-epic series: An aerodynamic…
This is a remake of the "Triangle "Missing Square" Puzzle" by ProfHankD. I split it to different models to print each in different color, and I created the “missing” 1x1 in case we want to use it.
Add some cool factor to your game. please check out https://www.printables.com/@Jerryie he has allot of cool kit cards.
Just removed a layer in fusion
Missing armor piece from the B2-HA from the the black series jedi survivor 3 pack.Missing armor piece from the B2-HA from the the black series jedi survivor 3 pack. Recommend painting before gluing to lower torso. If you need it and down…
Occasionally you need to disassemble the pump on a MSR Whisperlite camp stove. This tool is a special spanner to help unlock and lock the top pump retainer.
Add some cool factor to your game. please check out https://www.printables.com/@Jerryie he has allot of cool kit cards.
Missing square puzzle (Curry's paradox) that I made for a geometry class. Students can find the lengths of the sides, the area of the shapes, and compare them in order to solve the puzzle, why does the one orientation seem to give 1…
Very quick and easy print for a very silly idea. Technically requires multiple materials, but can easily be printed using a single-material printer by slicing both models individually at the same position, then swapping the material after…
Add some cool factor to your game. please check out https://www.printables.com/@Jerryie he has allot of cool kit cards.
I lost two of the original buttons within the first week of wearing the clogs. I printed the replacements in ASA, but PETG should work fine as well. Button and Pin fit snugly, but I still added a drop of super glue.
This fits mine, it might fit yours too. look at the dimentions. i simply force-twisted it onto the bolt threads. looks much better
On my Dell 7450 the keyboard was faulty, ordered a new one. Now the original, with the extra buttons was £45, without the buttons (slightly different model) £15. Since I never used that, I printed a cover and saved £30. I used Galaxy…
The file was missing a piece, extracted it from the STEP assembly and posted as an STL. Its called Body10 in the STEP, left it as is.
Colt Express Card Racks Remix (Add Doc missing)
This model is designed to make the missing steps issues on drv8825 stepper drivers more observable. If you're noticing weird artifacts on your print and your printer is using drv8825 stepper drivers, chances are your printer is affected…
This is an adorable sign to give to someone you love. ❤
Introducing the (already existing but made into 3d) missing square illusion! After being inspired by Michael Stevens' Missing Cookie Illusion, I thought “huh, why can't i find this as an STL anywhere? It's all that one triangular missing…
I received a small cheap tripod with the top plate missing. So I designed this top part in order to mount a handycam on it. After printing, you will need also a ¼ 20 UNC screw to fit the camera's inner threads. I printed in PLA
This kit includes all the missing parts that are not part of the original model or any of the available upgrade kits. These parts are very small and must be printed on a resin printer.These include: Refueling Hoses and Rack: These hoses…
I received this puzzle as a gift and when I got close to finishing it I was concerned that a piece was missing. Sure enough, there was. So I took a picture of the where the piece would be, reverse designed it in OnShape, printed it, then…
Figured the base game box was big enough for the expansion cards with a bit of tweaking so after a few measurements whipped this up.
Modio designed version of armored Samus remix.
reverse engineered mising stock holder part. For best efficiency glue silicon or sand paper to the parts that touch aluminium rods.
they were not in the original project
Simple Remix of 4961537 Standard-19mm Camera Version, but with Vents for Air flow. Category: R/C Vehicles
My girlfriend lost part of her sunglasses which became unwearable, I printed this missing part ang gave the sunglasses new (better?) by look replacing the golden part for white one
I found a model on Thingiverse for storing YubiKeys but unfortunately the most important part was missing so I created it myself. I know that the 5 NFC and 5Ci fit but the rest I can't confirm because I don't have those models. EDIT: I…
It's a puzzle piece. Printed in white PLA. Yep.
its the hello neighbor err
Let's admit it: every kid (and every self-respecting adult) has spent at least one night of their life looking for that one missing brick scattered somewhere around the house. Well, this model is the direct result of that search gone…
I created this for a couple of my students with the help of the STEAM teacher in my district. It is an adaptive device for students with limb differences to help them to be successful in playing guitar. The pick holder is tilted back 15…
Это ключ в форме КВАКА
This thing lifts our IKEA drawer cabinet a few millimeters. OpenSCAD file is included for your adjustments.
Somehow I dropped a couple of pieces from my kit and never managed to find them. Looked at the wooden frame they came from – sure enough, spots for 8 pieces, and I only had 6. Took a few caliper measurements and sketched this up in…
Inglés: I made this simple organizer to store Alice is Missing along with its expansion Silent Falls inside the original box. It also includes a small divider you can use to separate used cards or organize the contents however you like.…
I bought this Power Base Organizer at Wal-Mart and was frustrated that it seemed to be missing a segment. So I took it upon myself to build and make my own.
Ratchet Peg Replacement Missing Post Mail Box Print in nearly any material however you want, it will probably work.
Just two simple single-part inserts for Alice is Missing and the Silent Falls expansion. I didn't sleeve my cards, and didn't design these insert to accomodate sleeves. There is enough room in the base game box to hold the expansion…
CS2 Missing Link Community Charm, taken straight from CS2 asset using Source viewer Minor change was done to the surface Keychain was removed so you can attach your own in after printing Edited in Blender and Autodesk Fusion
I needed an organizer for Alice is Missing and the Silent Falls expansion, and I didn't like the ones I kept finding online. This is just a simple divider to keep two decks separate. It will also hold the manuals for both the base game…
These are the two missing inserts from Falkien's Skirt inserts, so you don't have to print and cut the full pieces. Just print 2 of each per corner.
