Search results: mixer

Sort order

919 models

P
Printablesfifindr

Drill Paint Mixer

Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…

Downloads
9,644
Likes
2,960
Rating
4.86
P
PrintablesdePrintinator

Paint Mixer

This is a two part stirrer, the stirrer itself and the shaft. You'll need an m5 bolt (40mm or so) to screw the stirrer into the shaft. You can customize the shaft length by non-uniformly scaling the X axis longer. I printed the shaft…

Downloads
8,960
Likes
2,732
Rating
4.93
P
PrintablesDownRight

KitchenAid Stand Mixer attachment hanger

I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…

Downloads
6,060
Likes
3,545
Rating
4.88
P
PrintablesSimple3D

Kitchen Aid Mixer Funnel

It's that time of year that my girls do their cookie weekend. They make dozens of different cookies. I saw several ads for funnels. I thought I would design/make them one. They have Kitchen Aid K45SS and a Professional 5 Plus mixers. FDM…

Downloads
4,241
Likes
1,427
Rating
5
P
PrintablesPeter Martin

Small Painting Mixer Trays

A small Paint Mixing Tray for modelling complete with Brush Rest/Holder. Size 105mm x 50mm. The one in the picture is scaled 20% bigger in the slicer and printed with 10% infill. Addition 27 Oct 2023. added a larger version (130 x 80mm)…

Downloads
2,600
Likes
1,152
Rating
4.98
P
PrintablesRyan Smith

KitchenAid Stand Mixer Attachment Hook

Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.

Downloads
2,451
Likes
1,048
Rating
4.78
P
PrintablesPRINTER

Paint mixer - 100% printable - no support - optimized orientation

Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…

Downloads
1,865
Likes
785
Rating
4.78
P
PrintablesJens83

Paint mixer 40mm diameter for small paint cans

This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…

Downloads
1,861
Likes
187
Rating
4.96
P
PrintablesGentleDesign

Drill Mixer – Paint, Mortar & Cement

Turn your cordless drill or power drill into a practical mixer with this 3D printable Drill Mixer Attachment! Designed for quick and easy mixing of a wide range of materials such as paint, plaster, grout, mortar, cement mixtures,…

Downloads
1,679
Likes
635
Rating
5
P
PrintablesThatGuy

Cord Wrap for Kitchenaid Stand Mixer

I designed this cord wrap to fit the curved back of my Kitchenaid stand mixer, but it should fit anything with a wide curve. Attach with double-sided tape or other adhesive. It should print on its side without supports, but minimal…

Downloads
1,474
Likes
216
Rating
4.61
P
PrintablesMark Rhodes

Inverse Kinematic Paint Mixer

This is my Inverse Kinematic Paint Mixer, as seen at https://youtu.be/FnnN7typFP0 These printed parts combined with the following non-printable parts will make an automated mixing station for your small paint bottles (up to 45mm…

Downloads
1,462
Likes
209
Rating
5
P
Printablesmscalora

Parametric Mixer Drill Attachment

I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…

Downloads
1,407
Likes
392
Rating
4.75
P
PrintablesDan Rogers

Flour Funnel for KitchenAid stand mixer

Happy Thanksgiving - Make those Holiday Recipes with ease with this Easy to add dry ingredient funnel to your mixing bowl while the mixer is running (or not). This offset funnel has a tool accessory post to mount onto the KitchenAid…

Downloads
1,367
Likes
336
Rating
3.8
P
PrintablesVít Budina

Print in Place Cement Mixer Module

This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. Thanks to…

Downloads
1,367
Likes
225
Rating
4.9
P
PrintablesStenly_G

Drill Mixer – Multi Size

This collection includes five spiral mixing tips in a variety of sizes, making it easy to find the right tool for your mixing task. The spiral design helps create a smooth and efficient flow of material while reducing splashing. These…

Downloads
1,352
Likes
530
Rating
5
P
PrintablesJochem

Slider fader knob for Soundcraft, Yamaha, Behringer mixer

Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…

Downloads
1,337
Likes
150
Rating
5
P
Printablesmivas

mimimixer

Mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes set of heads, hex handles and handle connection barrel. Diameter = 30mm Height = 20mm Hex handle length = 160mm…

Downloads
1,280
Likes
494
Rating
5
P
Printablesmivas

Turbo Mixer Head

Turbo mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes two handles and extension barrel. Diameter = 40mm Height = 50mm Hex handle length = 200mm x2 Prints quickly and…

Downloads
1,240
Likes
335
Rating
5
P
Printablesmhparsons

Cord Wrap for Kitchenaid Mixer

Based on the original, but (1) enlarged a bit so the cord fits better and (2) used angles (no curves) so it prints w/o supports (printed on its side). I attached it with a medium size 3M Command Strip.

Downloads
1,199
Likes
213
Rating
4.69
P
PrintablesBaronPhartman

Paint/Resin Mixer

Saw some paint mixers online, but didn't find anyone I liked and thought was designed to my liking, so I whipped this one up, has a 6mm hole in order to use a wooden or aluminium dowel that you can either glue or screw in

Downloads
1,091
Likes
173
Rating
5
P
PrintablesTitafubaki

Paint / Epoxy Mixer

You can use this tool to mix paint or epoxy with your drill.

Downloads
1,062
Likes
248
Rating
4.82
P
Printableslanguer

Paint Mixer / Stirrer (remix)

Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…

Downloads
939
Likes
95
Rating
4.95
P
PrintablesSketch Me To

Drill Paddle Mixer

This disposable mixing paddle is designed as a low-filament, practical workshop consumable for stirring glue, paint, epoxy, resin, fillers, and other messy materials. The paddle is intentionally simple and lightweight, making it quick to…

Downloads
929
Likes
137
Rating
5
P
PrintablesRex

Paint Mixer

Just a quick paint mixer to throw in a drill motor or ¼"(6.35mm) impact. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/fhWayxIHUiG or on https://onshape.com…

Downloads
890
Likes
93
Rating
4.56
P
PrintablesMeister Edel

Stirring rod/ mixer for paint & epoxy support free (fully printable & wood)

Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…

Downloads
874
Likes
184
Rating
5
P
PrintablesMad Mod Labs

DEEJ VOLUME MIXER

Update 4/2023: Updated 3D models to include versions for both Micro USB and USBC Arduino Pro Micro boards. This is my take on a 3D printed enclosure for the Deej volume mixer. The design is based on the MisteR deck. Please check out my…

Downloads
866
Likes
86
Rating
5
P
PrintablesVolker

Concrete Mixer

Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…

Downloads
859
Likes
216
Rating
4
P
Printablesmivas

Water/Paint/Liquid Mixer 40x40mm

This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm

Downloads
849
Likes
203
Rating
5
P
Printablesmichaelstickels

Kitchenaid Mixer Attacmenet Stands

A simple and easy to print stand to hold the 4 standard Kitchenaid bowl-lift or 3 head-tilt mixer attachments upright. Saves some space and keeps them organized. The head-tilt models come with a different dough hook that requires more…

Downloads
847
Likes
396
Rating
5
P
PrintablesMearcat

Paint can shaker/mixer for hand drill

This is a simple shaker/mixer that attaches to your hand drill (corded/cordless) to drastically speed up the time it takes to mixing of a can of spray paint. No longer do you have to shake the can manually for a minute or more. I've…

Downloads
844
Likes
177
Rating
4.86
P
PrintablesMarvin Deppe

Eccentric paint spray can shaker/mixer for your drill

This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…

Downloads
808
Likes
155
Rating
4.86
P
PrintablesMenschenfeind

Small Drill Mixer, Paint Stirrer - Kleiner Rührstab für Akkuschrauber

A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…

Downloads
727
Likes
79
Rating
5
P
Printablesdantech

paint mixer

paint mixer hole diameter 8mm Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through a small donation. The STEP file…

Downloads
722
Likes
90
Rating
4.83
P
PrintablesVC Design

Drill Paint Mixer

The mixer features a hexagonal shaft , allowing it to be securely clamped in most drill chucks and bit holders for fast and efficient mixing. Features Hexagonal shaft for secure drill attachment Compact and lightweight design Suitable for…

Downloads
721
Likes
195
Rating
5
P
PrintablesLua

Epoxy mixer

A highly efficient, heavy-duty mixing paddle designed to replace broken or worn-out commercial epoxy/paint mixers. Engineered with a multi-fin blade design to create a strong vortex, ensuring thoroughly mixed resins, epoxies, or paints…

Downloads
712
Likes
294
Rating
5
P
Printablesarea51agent

Kitchen Aid Cord Organizer for Mixer

My sister found an item online that she wanted me to make (first image), but I couldn't find the file anywhere, so I made it myself and figured I'd share it with the rest of the world, hah. There were 3 iterations, the 2nd one was good,…

Downloads
707
Likes
137
Rating
5
P
PrintablesTelekineticyeti

Paint spin-mixer drill attachments

These are two paint mixing drill attachments that will use the power of your drill to mix spray can paints/primers, as well as model paints. They are inspired by one of Adam Savage's favorite tools: The spray-can mixer model can accept…

Downloads
692
Likes
112
Rating
4.78
P
PrintablesWMD

Epoxy or Paint Mixer

I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…

Downloads
680
Likes
140
Rating
5
P
Printablesalien hitman

Console Mixer Slider Fader Knobs Replacement for Potentiometer

This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…

Downloads
669
Likes
51
Rating
5
P
PrintablesDionarap

Paint or Epoxy mixer with rod

small paint/epoxy mixer with Hex-rod 8mm, total diameter of the rotor is 35mm and 20mm tall. Rod is 100mm long but easly strechable if needed longer.

Downloads
658
Likes
67
Rating
5
P
Printableshorrovac

Paint mixer

Cut appropriate length of M6 threaded rod or smooth rod with 6mm diameter. Make sure the rod is straight, otherwise everything will be wonky. You can simply screw the mixer on the threaded rod, with a smooth rod you might be required to…

Downloads
636
Likes
72
Rating
4.8
P
PrintablesSzvmkn

Drill Paint and Epoxy Mixer - 3 sizes

This is the "End Game" paint mixer. If you are tired of flimsy wooden sticks, splashing cheap plastic paddles, or unevenly mixed paint, this is the file you’ve been waiting to print. This design have small scrapers on the side, to…

Downloads
628
Likes
251
Rating
5
P
PrintablesKrzCich

Automatic Resin Mixer

Simple device which help mix the resin before print without tiring your hands ;) It also help prevent air bubbles in resin. As gear I use a “WADE EXTRUDER” gears which I found here: https://www.thingiverse.com/thing:65939

Downloads
626
Likes
172
Rating
0
P
Printablesdantech

Paint mixer mod.2

Paint mixer model 2 The hole is 8mm with tolerance already applied. If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through a small…

Downloads
592
Likes
54
Rating
5
P

Cordless Screwdriver Mixer Paddles For 20oz Solo Cup

I got sick of mixing epoxy resins and silicones by hand and decided to just make a much smaller version of the helical mixers that we use in the big gallon buckets. I also made sure to shape it with the exact internal dimensions of a 20oz…

Downloads
588
Likes
78
Rating
2
P
PrintablesCarlos

Resin epoxy paint Steer mixer paddle

Epoxy Resin Mud Power Mixer Blade Drill Tool / Plastic Paddle Replace Resin Mixer Drill Attachment

Downloads
587
Likes
49
Rating
5
P
PrintablesPhobos

Strong mini mixer for use with drill

Quick and simple mixer for small batches of resin, silicone and plaster. Takes about 10-15 minutes to print. 3 lengths available - 65mm, 105mm and 125mm. Also a pronged variant for viscous fluids. Each connects to a drill, with a 5mm…

Downloads
585
Likes
195
Rating
5
P
Printablesjohnytriplex

Paint mixer

Simple paint or epoxy resin mixer. To make a paint mixer you need: M5 screw rod (20cm) 2x screw nut M5

Downloads
577
Likes
168
Rating
5
P
PrintablesLazruck

Citadel Paint Pot Mixer For Drill

Fits a drill with a ½ chuck. Printed in PLA+ 4 top, 4 bottom, and 4 walls with 50% infill.

Downloads
576
Likes
72
Rating
5
P
PrintablesGuido

Nice paint mixer.

Efficient paint mixer to be mounted with threaded rod M6, two nuts M6 and a washer. Easy to mount on drill. Pay attention to the speed when mixing! Start slow !!!!! This mixer pushes the paint nicely downwards, so that the bottom of the…

Downloads
503
Likes
103
Rating
4.33
P
PrintablesJoe

KitchenAid Mixer splash guard

I wanted a textured surface on my print, so I remixed this to be able to print the parts laying flat on the 180x180mm bed. You'll need to print them with supports, but without a skirt or brim when printing on a Mini/Mini+; after which…

Downloads
497
Likes
101
Rating
5
P
PrintablesChad Stewart

KitchenAid mixer speed control knob

Print solid using many perimeters for durability. I suggest a durable filament or resin.

Downloads
490
Likes
31
Rating
5
P
PrintablesDonald Burden

KitchenAid stand mixer bowl top with funnel

It prints upright with minimal supports, just on the flat underside of the base of the funnel, with an 8mm brim to make sure everything stays in place. There are small detent beads on the funnel clip to make it removeable, but if you…

Downloads
483
Likes
89
Rating
5
P
PrintablesSHR3D.eu

Little beton mixer truck - Malý domíchávač

[EN] Sometimes it happens that a visitor comes with children who are bored and need some entertainment. In this case, simple and easy to print toys come in handy, where the child will have fun both watching them print and playing…

Downloads
478
Likes
63
Rating
4.89
P
PrintablesHellcatless

Epoxy mixer stick and plate

Very fast printable epoxy mixer stick and plate. I dont found anything where i can mixing the epoxy so i make it my self. If stick or plate is too small you can scale it bigger to the slicer. You can print it together or only stick or…

Downloads
460
Likes
34
Rating
4.88
P
PrintablesSanford Prime

Mechanical Hand Mixer - Fully Printed & Wireless!

When you find yourself in a tough situation (without forks to mix with) this should do the trick! Just plan ahead a little and print one of these before breakfast and you'll feel more accomplished while eating that omelet! Material for…

Downloads
449
Likes
132
Rating
4
P
Printablestgiflatball

KitchenAid Mixer Attachment Under-Cabinet Mount

A simple method of storing the standard Kitchenaid mixer whisk, dough hook, and paddle when not in use. Ideal for renters, this is made to mount with removable 3M strips. Use PETG or ABS for best results. PLA might work, but I haven't…

Downloads
443
Likes
207
Rating
0
P
Printables3DMK

Epoxy Mixer Tray and Applicator (stackable)

Epoxy mixer tray and applicator for one time use. Stackable for easy storage of larger quantities.

Downloads
443
Likes
65
Rating
5
P
PrintablesCuttin3ds

Mixer Fader Caps

Fader caps inspired on Pioneer S9 for Vestax, Ecler and Innofader. The vestax model will probably work with mini innofader. The innofader pnp model works with Ecler Nuo 2.0 channel faders too. Print at 0.05 to have smooth finish. Print…

Downloads
427
Likes
51
Rating
0
P
Printablesemcee_nars

JC Riser Creality K1 SpeedBump REmixer

If you're looking at this, you like the Speedbump and the JC hinged Riser and you really wanted to make both work. Now you can. Included is a VERY rough combo of the JC Hinged Riser for the K1 as well as the speedbump. Some minor work…

Downloads
416
Likes
56
Rating
4.67
P
PrintablesAHoward

Resin mixer for impact driver

Quick print, disposable, effective.

Downloads
408
Likes
68
Rating
5
P
PrintablesEA3D

Mixer

simple self-made mixer, the thread size is M6

Downloads
405
Likes
69
Rating
0
P
PrintablesAnanords

deej - A Physical Volume Mixer

Meet my version of deej! deej is a physical voulume mixer. Just like the volume mixer built into windows, just physical! This means that you can change the volume of an application without closing your important game. You can turn the…

Downloads
397
Likes
131
Rating
4.78
P
PrintablesLazlo

Ultimate Concrete Mixer Truck

I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…

Downloads
386
Likes
88
Rating
5
P
PrintablesNC10

Paint Stirrer/Mixer 3/8"(or 10mm) Drill Attachment

A drill attachment for 3/8" / 10mm drills. This print is designed to be printed standing up. I recommend printing with a brim. but no supports required. Designed to stir 1 gal paint cans, but usable and helpful for larger and smaller…

Downloads
368
Likes
42
Rating
5
P
PrintablesEl_Polpo

Desktop Volume Mixer - DeeJ

Here is my version of a DeeJ volume mixer. I changed the Arduino code to be able to use some mute buttons. I also added an option to put RGB adressable LEDs thanks to FastLED library in order to indicate the state of the audio tracks (my…

Downloads
362
Likes
111
Rating
5
P
Printablesschleprocker

Vortex Mixer Paint Shaker for Drill - Vallejo/Army Painter/etc Bottles

Took inspiration from this Vortex Mixer and modified its parts to fit my hand held drill instead to mix my miniature paints, vallejo/citadel/army painter/etc. https://www.thingiverse.com/thing:534894 This requires two hands. One to hold…

Downloads
354
Likes
60
Rating
4.6
P
PrintablesCastIronFace

Small Audio Mixer Stand

This is a a stand I built to elevate a small 12 channel audio mixer, Behringer 12 XENYX. If you print this using the stl files, you will need to create two sides with one mirrored. Don't worry about cleanup, the little bit of elephant…

Downloads
354
Likes
53
Rating
5
P
Printables20r3mun

Mixer Saver (for KitchenAid stand mixers)

KitchenAid mixers have a tendency to bounce a bit while mixing. It happens when the screw in the tilt mechanism gets loose due to vibration. This screw controls the angle of the mixer head when tilted down and locked. When it loosens the…

Downloads
350
Likes
86
Rating
5
P
Printablesfrez_knee

KitchenAid Mixer Accessory Attachment Holder

My take on the popular KitchenAid mixer attachment holders. Can be attached under your cabinet using a 3M Command strip or a #8 flathead wood screw for a more secure installation. I've used PLA and PETG with no issues. Supports are…

Downloads
344
Likes
24
Rating
0
P
Printablesfutureconstruct

Testors Paint Vortex Mixer Spinner Shaker Drill Attachment

Stirs up the paint in a few seconds (ok, depends how old your paint is lol) Intended to be “pulsed” a few times so that acceleration and deceleration mixes the paint, along with the bottle being square. Printed in 31 minutes with my 0.6mm…

Downloads
344
Likes
64
Rating
4.33
P
PrintablesDrKronos

Drill mounted miniature paint mixer

..just make sure you don't use the drill in reverse. Version 2: https://www.printables.com/model/1401771-drill-mounted-miniature-paint-mixer-v2

Downloads
342
Likes
90
Rating
5
P
PrintablesDC3d

KitchenAid Stand Mixer Attachment Hanger (Remix)

I wanted an all-in-one version that was a little beefier and could be printed with increased strength by printing at a 45° angle. Printed with ASA, but other filaments should work fine. Infill: 20% gyroid Brim on; no additional supports

Downloads
338
Likes
46
Rating
3.5
P
PrintablesRC_3DWorks

Paint Mixer / Stirrer

Tired of mixing paint or epoxy by hand, use this tool. Designed to be used with a 6mm threaded rod

Downloads
337
Likes
84
Rating
5
P
PrintablesCeptoRider

KitchenAid Mixer Card Holder

This is a remix of deslucht's KitchenAid Model, separated parts on Thingiverse: https://www.thingiverse.com/thing:4705694 . The print file is arranged to enable a filament color change. Unfortunately this orientation uses more supporting…

Downloads
336
Likes
62
Rating
5
P
PrintablesTapRackBang

KitchenAid Mixer Knob

I whipped this up before even checking to see if some were already available. The others available are likely fine, but I figured I'd upload mine as well since I already made it. It's a tight, press on fit. I printed mine with PolyMaker…

Downloads
336
Likes
30
Rating
5
P
Printablesplc_one

Small drill paint mixer

For everyone waiting for the next design marvel, I have to disappoint you. This is purely functional. Hi there, Because I'm a fan of small paint buckets , I decided to tinker in Tinkercad and create a drill attachment just for them. This…

Downloads
336
Likes
37
Rating
5
P
PrintablesJohnathan1876

Resin mixer

This is a mixer for resin, I use it mainly for plaster as I use it more but you can use it for resin, epoxy, plaster, concrete or any other chemical that is cured by mixing 2 parts. just know that there are types of epoxy that heat up…

Downloads
335
Likes
35
Rating
5
P
PrintablesJack

Static Mixer

If you wanna get rid of the stripes in your toothpaste, or for mixing 2 components without stirring - to minimize trapped air bubbles connect a static mixer

Downloads
327
Likes
30
Rating
0
P
Printablesnyacom

Cord organizer for Kitchen Aid Mixers

Cord organizer for Kitchen Aid's Classic and Artisan mixers. Designed it for well fits on curved body with adhesive.

Downloads
324
Likes
136
Rating
5
P
PrintablesDr. Agon Smith

Drill Mixer for a threaded rod 6mm

It is a remix of a simple drill mixer model. It became a bit weaker at the bottom, so it is harder to mix something denser like a small batch of concrete, but otherwise it works. BOM: 6mm threaded rod 2x 6mm nuts Print it with normal…

Downloads
312
Likes
101
Rating
5
P
Printablesemoses

Kitchenaid Mixer Attachment Holder.

This post will fit the mounting holes for Kitchenaid mixer attachments (e.g. whisk, beater, etc.). I attached it to the underside of a cabinet with Command strips, and used it to hold the attachments vertically. It may work to hold the…

Downloads
312
Likes
44
Rating
5
P
Printablesbostwickenator

Quick Print Paint Mixer

This is my take on a paint or chemical mixer or stirrer. It's printed in two parts for speed and strength. The shaft is a standard 6.35 hex with a quick change lock so you can use it in a power drill, screwdriver, or impact driver.…

Downloads
308
Likes
59
Rating
0
P
PrintablesAsa

Spray paint can mixer - shake those aerosol rattle cans easily!

Includes step files, Prusa Slicer .3mf file, and the fusion 360 file. The hole size is for 67mm or smaller cans. Use a 5/16 inch nut and bolt or M8 nut and bolt. You will need some type of thread locker to secure the nut in place, like…

Downloads
298
Likes
69
Rating
5
P
Printablesbuffalojr

KitchenAid Stand Mixer attachment hanger screw-in

This is a remix of DownRight's KitchenAid Stand Mixer attachment hanger. One of the models you can print as a single piece. The other models allow you to orient the pegs at 45 degrees and print the pegs in one piece. Also you can install…

Downloads
298
Likes
40
Rating
5
P
PrintablesGuido

Nice drill paint mixer tool.

Efficient paint mixer to be mounted with threaded rod M6, two nuts M6 and a washer. Easy to mount on drill. Pay attention to the speed when mixing! Start slow !!!!! This mixer pushes the paint nicely downwards, so that the bottom of the…

Downloads
287
Likes
61
Rating
0
P
PrintablesManfredMan

Small Drill Mixer low bubbles, Stirrer, flacher Rührstab für wenig Bläschen mit 6-Kantantrieb

Beim mixen von 2K Massen habe ich immer wieder das Problem, dass dabei viele Luftbläschen eingerührt werden. Durchs Vakuumieren wird es deutlich besser, aber ich wollte einen Rührstab der weniger Luft ein mischt. Deshalb ist dieser sehr…

Downloads
282
Likes
58
Rating
0
P
PrintablesCanabalooza

KitchenAid Mixer Cord Hook

Remix of the cord hook to fit the contour on the back of a KitchenAid Artisan stand mixer.

Downloads
282
Likes
44
Rating
4.67
P
PrintablesWilfred

Behringer mixer stand

A table stand for my mixer. this way I can see all the controls at a glance and from a distance. you can loop the cables under the beam to keep it a bit tidy. Use some force to clamp the parts together. It's a tight fit.

Downloads
280
Likes
64
Rating
4.8

Kitchenaid Mixer Accessory Holder Remix

I have printed a bunch of different Kitchenaid stand mixer accessory hangers before, and most of the break because of the orientation of the layer lines and the twisting force you usually need to apply to get the things to hang properly.…

Downloads
279
Likes
23
Rating
5
P
PrintablesOmpapamowmow

INTLLAB Vortex Mixer Adapter

I purchased the INTLLAB vortex mixer to mix the paints I use for my miniatures. The shape of the mixer's top plate works well if you mix your paints cap-down, but it's hard to keep the bottles in place when they are upright. I've…

Downloads
277
Likes
38
Rating
5
P
PrintablesChris

KitchenAid Mixer 3 Attachment Hanger (single piece print)

Remixed hanger for the three mixer attachments that come with a standard KitchenAid mixer. Single piece print. The two countersunk holes are sized for #8 wood screw but a #6 will also work. I've found adhesives tend to come unstuck in…

Downloads
275
Likes
24
Rating
5

Modify Paint / liquid mixer by Shayter Andrew

I recommend printing PETG, 4 perimeters, 4 upper and lower layers, filling 30-40%

Downloads
275
Likes
26
Rating
0
P
PrintablesMathieu Maries

Paint Mixer diam25 // Mélangeur peinture diamètre25

If you have a little quantity of paint or resin to mix, this object is perfect. You just need to add a Ø4mm rod to the center. Maybe you need to adapt the scale of the hole in case of your printer settings for adjustment. Si vous avez une…

Downloads
273
Likes
13
Rating
5
P
PrintablesMax

Paint Mixer M8 Remix

A paint mixer, but with an M8 hole for M8 all thread instead of a 3D printed shaft

Downloads
271
Likes
33
Rating
5
P
PrintablesAkshay

Open Source Laboratory Rocker / Mixer / Shaker (Lab Rocker)

Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…

Downloads
270
Likes
151
Rating
5
P
PrintablesBoerny

Portable Volume Mixer / Fader - deej - Sound Control - Volume Slider

A portable volume mixer that connects over usb-c. I'm using it with deej, but it can be used for any software you want. You'll need: 5 sliding potentiometers ( https://amazon.de/dp/B081JNQ7MM ) 1 Arduino Nano usb-c (or similar) 4 M2…

Downloads
270
Likes
39
Rating
4.5
P
Printablesa.artigalas

Deej Volume Mixer

I am sharing my 3d model that I designed and printed to make my project, and links will be below. Project GitHub page : https://github.com/omriharel/deej/ discord server of the project : https://discord.gg/DHGtp9CX materials you will…

Downloads
267
Likes
73
Rating
5
P
PrintablesHEFENT

Drill Paint Mixer / Mezclador de Pintura para Taladro — 3/8" Resin & Epoxy Stirre

Mezclador para taladro diseñado para impresion 3D Utiliza una tuerca de 3/8" y una varilla roscada o tornillo de 3/8". puedes usar el largo de la varilla de acuerdo al uso que le des. Puedes limpiarlo despues de cada uso para seguir…

Downloads
266
Likes
40
Rating
0