1,392 models
I made this dock for my Apple Watch Series 4 with 44mm and it fits like a charm. I also tested it out with the 40mm version (3rd image) and it also fitted very good. It also fits all other Apple Watches (also Ultra), cause the format…
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
🐾 Abstract Minimal Animals – Forest Set (Low Poly) This set includes four minimalist low-poly animal figures designed in a clean, modern geometric style: Fox, Bear, Deer, and Wolf . The models are intentionally highly simplified ,…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for PETGSource material: PET
One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…
Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant
A very simple stand, designed to not obscure your figure very much. Designed specifically for the figure pictured, but a very simple modification to the length of the strut would let you adapt it to any height. You'll need two braces per…
Print approx. €4.56–€5.58 excl. taxPreliminary estimate for one variant
A folder with several models of fan covers ideal for having an aesthetic fan or one that does not get damaged. In the images you can see several models among them. _aperture_full_fan_cover Reduced_opening_fan_cover…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
The second version of the stand for painting models with hinged holders and larger locking wheels. M3 nuts and screws Bearing 608
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
You might have come across my slipping gear https://www.printables.com/model/490489-slipping-gear-clutch-gear-for-rc-cars and I have explained why I needed that. Now here is another piece of design that can work with my slipping gear but…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Martin is the king of Stargate models. Since Martin's model was uploaded, the PrusaSlicer added the ability to paint MMU colors directly onto models. As such, I went ahead and remixed his excellent model and painted a few of the model…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Details After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern. Dimensions…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
A small garage made for the 1:24 Skoda Octavia model (https://www.printables.com/model/762153-skoda-octavia-124), but you can use it for any prints with similar sizes. For the main body of the garage, I've used 0.3 mm layer height, 15 %…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
If slicing yourself, orient with the text face on the bottom Prints without supports Print in PETG Sliced at 0.15mm layer height using Prusa 0.15mm structural default settings for PETG at 245°C. Gcode provided is for MK3.5 * warning - one…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
I designed this model specifically for my Polar Vantage V3 watch, but it should be compatible with any Polar watch that uses the latest charging port. To make things easier, I’ve included all the Fusion 360 files, so feel free to tweak or…
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
A simple replacement lid for the KINGrinder manual coffee grinder (will fit models K0, K1, K2, K3, & K5). Useful if you have misplaced or broken the original lid, or if you would just like to customize your grinder with a different color…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Fan cover 25 mm a folder with several models of fan covers ideal for having an aesthetic fan or one that does not get damaged. In the images you can see several models among them 25mm_aperture_full_fan_cover…
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
3D vytištěné modely krychlových těles a ořezaných krychlí představují fyzické 3D edukativní pomůcky odpovídající příslušným modelům krychlových těles a ořezaných krychlí znázorněným v úlohách, které jsou zařazeny v GeoGebra knize s názvem…
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Open Source Agouti Designs Celebrating the World's awesomest creature, the adorable Agouti https://en.wikipedia.org/wiki/Agouti These were comissioned by Digital Naturalism Laboratories www.dinalab.net Created by Annie Hung…
Print approx. €2.37–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
A demonstration model showing 3 different ways you can make your prints grippy - knurling, fuzzy skin, and contours. The model includes a 2nd part which you can use to define the area for the fuzzy skin. Download, print, and experiment…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
This collection of 3D models is designed as an example for teaching mathematics, helping to make the concept of integrals easier to understand. The models show the area under a curve, Riemann sums with different rectangle widths, and…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Modely WK konektorů (Tesla Československo) / Models of WK connectors (Tesla Czechoslovakia) Jako ukázka tu je GCODE obou v 500% velikosti / As an example, here is the GCODE of both at 500% scale. POUŽIJ 3MF NE STL / USE 3MF NOT STL…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
parts for the mmu enclousure printed in one piece gcode with input shaper and prusament petg
Print approx. €7.10–€8.67 excl. taxPreliminary estimate for PETGSource material: PET
Mopar part #4034226 Sliding door pillar mounted courtesy lamp lens for DODGE B150 B250 B350 Van 1978-1993 Original designer: Chrysler Corporation, Detroit MI, USA. Original or reproduction part not available. Printed in PETG. White…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This 3D model is part of the graph of a 3D version of a mathematical function that I've discovered and named the Limit of Alternating Undulating Radical Addition function, or L.A.U.R.A for short. The graph of this function regularly…
Print approx. €6.88–€8.41 excl. taxPreliminary estimate for one variant
This Combination of Several Test Print Patterns Will Save a lot of Time Tuning your Printer. You can choose between two variants: 1.) A slightly remixed version of the original model (e.g. now including a squasing test) I made for more…
🇬🇧 English 🇬🇧 (In 🇫🇷 Français 🇫🇷 at the bottom of the page ) Ideal for your 3D designs, find 3D models of ISO M3 screws L4-L5-L6-L8-L10-L12-L14-L16-L18-L20-L25-L30-L35-L40 in .step files. and their washer and nut. Advice for 3D conception…
scale it up, make it flat, integrate, do what you want ;) I print with 1 layer raft to compensate for fine lines. Had some trouble on a first print without it, they tend to curl up for there is too little adhesion for a single line. for…
Drink organizer. New model 2024 https://www.printables.com/es/model/781648-2024-stackable-rotary-drink-dispenser New model 2023 https://www.printables.com/es/model/377642-2023-stackable-rotary-drink-dispenser And modular model :…
Edit: added an STL model/3mf file for printing an airless basketball out of Yasin PEBA filament on 5/2/2025. These models/files are for making airless basketballs out of either the PEBA filament or the Ataraxia Art Flexible PLA (FPLA)…
These are four to scale models of the new iPhone 12 (12 Mini, 12 Pro, 12, 12 Pro Max). They are perfect if you want to check which size fits into your pocket. Print instructions I have printed the models upside down and standing with a…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
Update 2023-09-17 Quad stl and Fusion 360 file updated with correct ‘Quad’ dimesions. Thanks to Evolver for catching this. Update 2023-08-31 New models (R2) have replaced the original models. The new models install easier in the Skadis…
BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
See also 1:64 stackable sea container (works well with HotWheels) My other printables for 1:64 display I've also created more models that you can be stacked horizontally as well as vertically. Below is a preview of the display shelf you…
I took the iPhone 13 CAD models from Front Page Tech and 3D printed them! I converted the STEP files to STLs then printed them out on the Prusa Mini in Red Prusament. The original STEP files along with my exported STLs are included. My…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing. 2023-09-29 - Fixed the 2x2x7u & 8u bins. There was some gaping on the bottom of the label. 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The…
I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.
Here is a fun Easter related model. The two pieces screw together to form an egg. There are two versions of the inner piece, one with a hole in the center to hide money and one without. The mode is similar to the popular “impossible”…
Build plate models and textures to customise the bed plate in your slicer. ❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest…
Total 3 stl. All support free. You can choose anyone if you print on resin while "FDM" means less overhang. Don't forget to post your made and sub my YouTube. *** Timelapse also feat. with Mandalorian Airbrush to Life by Michael Siller.…
UPDATE 11/14/2023 added nemmie and henry and gave some sub text UPDATE 10/1/2022: added octoberfest mugs and did some sorting creator notes: I am still working on this and I get very busy with work irl so please be patient. I have since…
"Harry Potter" Cookie Cutter set 1 - 8 models / characters Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Dolores Stamp - 50mm x 68mm x 4mm Cutter - 58mm x 76mm x 12mm Draco Stamp - 47mm x 69mm x 4mm Cutter - 56mm…
For the Simplified Version - I had to add cylinders to fill in the fragile suspension system shown below: If you are going to print it I would recommend the simple version.
Diameter: 75 mm I recommend splitting it in half (37.5 mm). I tried printing it with these infills: 10% grid, 5% grid, 0%.
Found these on Grabcab by Ben: https://grabcad.com/library/festool-systainers-sys-t-loc-1 Wanted to share here. These are not my designs.
Make it flexi! Design a print-in-place custom flexi 3D model from an image with the Web App or Python script! Download the ZIP file with the app executables and run the one for your operative system! (The executable file will open the Web…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The stabilizer “X” were done wrong. 2023-02-04 - Original post using the Gridfinity v5 spec Also…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Bin for IKEA SKADIS. Hooks need support. Size: A box can be in standard shape , or equipped with a wave and/or separator and/or hexagonal bottom. The separator is not available if the hexagonal bottom is present. Folders: There are 564…
A remix of hennysavenije's work, resized to 1:50, and put bases back on. Original collection has been removed from Thingiverse.com They do not claim credit for designing these models, and this is a remix of that. I've tested on a Prusa…
Horizontal stackable egg dispenser * *Added new model Extraramp with more inclination, more ramp, but same height, it is necessary to remove an area of the model once printed so that the eggs can pass through the floor below. Practical…
these are remixes of https://www.thingiverse.com/thing:2485063 and https://www.thingiverse.com/thing:2811554 There were a ton of problems with the original models and they weren't compatible with printers unless they were configured with…
to assemble you have to use m3 x 10mm screws
Scale to prefered size
Rigid timber can be made to bend easily when laser cut with a specific pattern. I wanted to try 3D printing with this pattern and I'm pleased to report that it works quite well. There are three aspects here. Some models are the results of…
Paris, Louvre Museum, France. These twenty five 3D scans models were generated for the short movie Gloria Victis ( https://vimeo.com/182609342 ) More images here: https://www.artstation.com/artwork/A6doN In this movie, the Cour Marly was…
Fishing Hook Remover Disgorge Slamatore 3 MODELS FISHING DISCHARGER
Spoiler: I have not created 507 models; the name refers to the book “507 Mechanical Movements” by Henry T. Brown from 1868. The book is also available as an online version with animations. You should definitely take a look at it. Such…
"Paw Patrol" Cookie Cutter (12 models) Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Marshall Stamp - 50mm x 76mm x 4mm Cutter - 59mm x 84mm x 12mm Rubble Stamp - 53mm x 72mm x 4mm Cutter - 61mm x 80mm x 12mm…
Halloween Models specifically designed for our Halloween Pack 2023 Models do not require printing support. PolyTerra™ Marble Gradient PLA Pumpkin Patch Orange PolyTerra™ Marble Gradient PLA Gastly Purple PolyLite™ Glow/Luminous Gradient…
This project is based on the excellent work of MakerWorld user PandaN , who shared a method for adding wood grain effects to 3D prints using a modifier mesh shaped like a log. However, the original 3MF is only compatible with Bambu…
Onshape document: https://cad.onshape.com/documents/d61dee32ee29272d4de3c193/w/de3416779f49ff1e82f67b0c/e/bceac7a90f13b0e0e9732da6?renderMode=0&uiState=6570b5d942c1be02b0211471 Updated June 3rd to include the cable clip as requested…
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. I was looking for something to meet the following requirements,…
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
First of all, thank you for your awesome models iczfirz! Removed the original base and simplified it to make just the Mandalorian printable. I prefer just the character without complex bases. No infill, no supports. Just print it!
Updated model Edit 4.2.2025 Added PETG model That can use also camera cover thath can be seen in gallery. I printed mine without any solid top-, bottom layer and perimereters. Just printed 3d honeycomb with 50% infill. It is very…
"Harry Potter" Cookie Cutter set 2 - 9 models / characters Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Bellatrix Stamp - 54mm x 69mm x 4mm Cutter - 62mm x 77mm x 12mm Dumbledore Stamp - 56mm x 68mm x 4mm Cutter…
Students will model a 3D geometric shape in the mathematical application Geogebra. The resulting model then serves as an illustrative didactic tool in mathematics lessons.
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-09-29 - Replaced the 1x3x3u x5 bin which wouldn't slice properly 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other…
Unveiling the Retro Gameboy Stand, a versatile 3D-printed stand designed to showcase either your Gameboy Classic or Gameboy Color console with ease. This single-display stand is crafted in the iconic Gameboy aesthetic, paying homage to…
We have some friends whom had been to Egypt. Perhaps I could print them some Xmas gifts ; )
F-35 model my friend tried printing but had lots of issues. All cleaned up. then i corrected the model to be a bit more accurate on the nose. Category: Vehicles
Improved cooling for the Sprite and Sprite Pro extruders . The same extruder is used on the Ender 3 S1, Ender 3 S1 Pro, and probably some other new Creality 3D printers. This mod for improved part cooling was designed around this mod that…
A set of digital dentures Upper and Lower models. Please note, custom made dental devices are patient specific and these will not be suitable for anyone else except the person they were made for. These are for demonstration purposes only…
Replacement Coins and Compass models to go with the other lovely 3D resource tokens in Lost Ruins of Arnak. Coins are double sided and can be printed in a single colour (gold or copper). Compass are designed to be 4 colour using layer…
This airplane models collection includes a curated selection of both classic and modern aircraft designs, perfect for hobbyists, collectors, and aviation enthusiasts. Each model has been created with smooth surfaces, accurate proportions,…
This spoiler is a remix, made from a RC Car Spoiler that i found on thingiverse. The spoiler is put together using super glue I used dobbeltsidet tape to mount it on the Landroid. Recommend to print in ABS or ASA Let me see them makes and…
This is a little Diesel Generator model I tipped up this morning to act as cargo (terrain) on my SCI FY layout. There is a new more detailed version (see photos), but both models are still available. The new model has no stringing (fixed)…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-02-04 - Original post using the Gridfinity v5 spec Also see my other Gridfinity Bins: Vase Mode Bins (No Labels) Vase Mode Bins with Labels…
Heard from the original designer Paul Ducarme (@PaulDucarme_3415198), he has official files posted on his own site, suggest everyone go check those out rather than my reverse engineered ones, probably improve your chances at making…
Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…
** Updated 10/18/26 to add OEM Y-Axis tensioner housing model in Stock Parts ** I did not like the stretchy generic GT2 belts that came with the Neptune 3 Pro, so I set out to replace them with genuine Gates GT2 belts. Since I was going…
A 2 and 3 stories lift for 1:64 models, HotWheels. The base platform can be used with the 2 and 3 storry sides. The platforms just slot in into the sides, glue can be used for extra stability.
Please Forgive me Irongate! But we need to have the models for Printing! Thingiverse did delete the Zip file from the download. I changed the name to .txt please rename it to .zip (dont forget to activate show filetype name in Windows!)…
I recommend add few supports when printing. You can simply attach the hook or glue it to the ball.
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
These are the models for the Apple iPhone 15 line up. If you are looking for some more and/or other Apple product 3D models, you should definitely check out the collection I have put together of all of the Apple products I have available…
The sizes of the premade models are given as outer dimensions in this format: xx mm-yy mm The generation tool for making your hinges is the Freecad docs (.FCStd). Open it in Freecad and locate the spreadsheet included in the fill. There…
Print lying on back with front upwards.
*inspired by a Twitter thread from James Sauerbaum (@JamesBaum88) "AI Image to Low Poly 3D Model" 1. Request AI-generated image using Bing Image Creator https://www.bing.com/images/create : "low poly [animal] 3D model render, white…
Get the single piston engine here! (Free) Get the V-Twin Engine here! If you would like to support me, consider these options: Join my Printables Club! Social Links: WhopperPrinting.com Patreon Etsy Instagram Discord TikTok
A set of 6 ornaments for your ornament needs. No assembly required. This set features variations of this geometric bauble concept, decorated with faceted sides. Particularly interesting when printed with high gloss filaments,…
Elevate your jewelry organization with this versatile 3D printed necklace holder pendant display. Designed to accommodate various necklace lengths and styles, this display comes in 12 different configurations, ensuring you have the…
My takes on the Characters, NPCs and Creatures of Storm Kings Thunder are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the…
I had separated and resized the model by 3d_by_EB (from a design of IslandDan) to 66% to fit with Daleks printed for my niece. A workmate suggested adding a hole in the Angel's base for use on Christmas tree. Great work from original…
M3 nuts and screws Bearing 608
Scaled models of buildings from the game Satisfactory. With optional holes for 6x3mm magnets ( here are the magnets I used). You can use them with a whiteboard for a more tedious but tactile factory planning experience! Fun to look at,…
![[12 MODELS] Christmas Balls Decorations 2024](https://media.printables.com/media/prints/1085080/images/8213145_40cb1de5-1e66-4b64-9aa9-fc59387262b0_6ce696fa-c3b6-4146-8d09-8e4795c68a98/navrh-bez-nazvu-1.png)
![[7 models] Christmas Tree Decorations 2024](https://media.printables.com/media/prints/1106102/images/8391356_2dae33e1-e3bd-4911-8feb-cd192d89c279_075671c2-a64c-43bb-8a0d-134b6ea676ad/navrh-bez-nazvu-5.png)
