P
PrintablesEldonRed
Moderator holdable (gorilla tag)
For best results print with supports and 30-50% infill for durability
- Downloads
- 4,627
- Likes
- 109
- Rating
- 5
Search results: moderator
62 models
P
PrintablesMysticalDork
Umarex Gauntlet integrated moderator
This is a replacement for the air stripper and baffle assembly on the Umarex Gauntlet pellet rifle. Prints in one piece, muzzle-end-down with no supports needed. I saw a noticeable decrease in firing noise after replacing the factory…
- Downloads
- 915
- Likes
- 44
- Rating
- 5
P
PrintablesFaceHaver
PBM Ringo-One Piece - PCP Airgun Moderator
I loved puhlbo's PCP Airgun Moderator / Suppressor but wanted to be able to print with less material and in less time. This answers that. Seems to work very well on a 6 FT LB air arms S200. I don't have a db tester, but it definitely…
- Downloads
- 877
- Likes
- 58
- Rating
- 4
P
PrintablesMirko
Air Gun / Air Rifle Silencer Moderator Suppressor 1/2" UNF Thread
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
- Downloads
- 794
- Likes
- 70
- Rating
- 0
P
PrintablesKerry
Airgun Moderator/Suppressor/Silencer
I print this with some brim, because it's rather tall for how little area it has to adhere to the print bed. Needs no support. I printed it in PLA but I assume any filament will also work fine. Should fit any airgun with a ½"-20 UNF…
- Downloads
- 782
- Likes
- 54
- Rating
- 5
P
PrintablesKerry
Donny FL Air Gun Moderator/Suppressor Baffle
Insert this baffle into a Donny FL suppressor to make it quieter. I've experimented with several different types of baffles and this is the best one I've found. Mine is for a PCP .22, - but this baffle could certainly be modified or…
- Downloads
- 725
- Likes
- 37
- Rating
- 0
P
PrintablesFaceHaver
PBM Ringo double length - One Piece Airgun Moderator
I love puhlbo's PCP Airgun Moderator / Suppressor , and my one piece remix works, but wanted something quieter. As the original does a very good job of reducing sound, I took the original files as a base, and doubled the number of…
- Downloads
- 544
- Likes
- 26
- Rating
- 5
P
PrintablesDanB
Air Rifle Moderator / Muzzle Brake
This is a air rifle moderator / muzzle brake for .22 and .177 cal. Has ½ x 20 threads to thread on to the barrel.
- Downloads
- 542
- Likes
- 55
- Rating
- 0
P
PrintablesCaviT
crosman 1077 silencer moderator
Silencer for the Crosman 1077. 105db without supressor, 80,1db with supressor. Neighbourfrindly ;-) I print it with 60% infill. I print it with ABS, but i think PLA is also working. Thx to Sidenius and BlixFox! Category: Sport & Outdoors
- Downloads
- 502
- Likes
- 42
- Rating
- 0
P
PrintablesDanB
Moderator/Muzzle Brake for T200 Air Arms air rifle
This is a combined moderator and muzzle brake for an Air Arms T200 .177 cal air rifle. This requires (1) 4-40 x ½ inch socket head cap screw. It reduces the muzzle blast noise but does not eliminate it. Muzzle blast is directed out the…
- Downloads
- 472
- Likes
- 44
- Rating
- 4
P
PrintablesMirko
Diana Stormrider / Bandit Air Gun Silencer Moderator Suppressor M10x1 Thread
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
- Downloads
- 446
- Likes
- 27
- Rating
- 0
P
PrintablesKisolov
Sound moderator 40x100+
Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…
- Downloads
- 411
- Likes
- 46
- Rating
- 0
P
Printablesniriwurx
Air Venturi Avenger Moderator LDC Adapter
NOTE: Out of the 237 odd downloads, there are numerous users on eBay that have blatantly stolen my design and have it listed for sale WITH MY WATERMARK ON IT. My only eBay account is NIRIWURX I have never sold these on ANY platform…
- Downloads
- 332
- Likes
- 33
- Rating
- 0
P
PrintablesDanB
Moderator for an Air Rifle
This is a moderator for a .177 cal air rifle with a 1/2-20 threaded barrel. Reduces muzzle blast sound by approx. 75%. Printer: MK3s, Filament: Polymaker ASA or Prusament PETG, Slicer: Default settings for prusament ASA and PETG.
- Downloads
- 329
- Likes
- 35
- Rating
- 0
P
PrintablesJOHANDW
Airforce Condor SS Moderator silencer
I was not satisfied with the stock Condor SS moderator baffles on my .22 airrifle and experimented with some 3D printed moderators , some came out louder and some slightly softer, but this design made a huge difference. I adapted the…
- Downloads
- 293
- Likes
- 13
- Rating
- 0
P
PrintablesAgameg
Air Venturi Avenger Moderator
UPDATE AUG 2026: I have released a new slightly better version! Check it out: I've spent about a year and a half tweaking designs for an Avenger moderator. Shout out to the many makers here and on Thingiverse as well as the guys at…
- Downloads
- 269
- Likes
- 17
- Rating
- 0
P
PrintablesKycirion
Umarex Notos Moderator Insert
I wanted to test increasing the sound suppression on my Notos without chopping off the stock moderator. So I made a new insert with more baffles that can be used stand alone without the external suppressor. This baffle insert increases…
- Downloads
- 261
- Likes
- 15
- Rating
- 5
P
PrintablesFaceHaver
Umarex Gauntlet moderator to 1/2 UNF
I really liked MysticalDork's Umarex Gauntlet integrated moderator , and wanted to test to see how well it would work on other airguns. I had mixed results - seems to work to reduce sound (though less than an enclosed unit), but I am…
- Downloads
- 241
- Likes
- 13
- Rating
- 0
Reximex RP RPA Mito .22 Moderator
1/2" UNF CW threaded moderator for .22 cal pellet guns. TPU is the most effective, but nearly 70 grams. 2 wall ABS with bare minimum infill will be about half that. Single wall ABS feels like it would fail spectacularly.
- Downloads
- 235
- Likes
- 20
- Rating
- 0
P
PrintablesKisolov
Korsar Sound Moderator Upgrade Kit
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. The moderator's inner chamber has a depth of 88mm. I used 4 cones of 10mm and 1 cone of 20mm with a sleeve length of 19 mm. The front…
- Downloads
- 212
- Likes
- 28
- Rating
- 5
P
PrintablesAgameg
Air Venturi Alpha (Snowpeak AP900) Moderator (.22)
The factory moderator on the AV Alpha was honestly not bad (better in my opinion than the Avenger for sure) but I can do better. The design uses cones to strip air from around the pellet, and bleed holes into an outer plenum to further…
- Downloads
- 190
- Likes
- 15
- Rating
- 5
P
PrintablesArcticNemo
Quick-Connect Moderator, Extended Barrel
Much of the piece is telescoped over the barrel and there is a multichambered accumulator at the rear half. It attaches with any of these adaptor options . For standard factory barrels, try these 4.5" models . A matching pump arm and…
- Downloads
- 183
- Likes
- 18
- Rating
- 0
P
PrintablesArcticNemo
Quick-Connect Moderator, Standard Barrel
Adding only 4.5" to overall length but having lots of expansion room, this moderator attaches with any of these adaptor options . Those using extended barrels will want to look here . A matching pump arm and buttstock are forthcoming;…
- Downloads
- 178
- Likes
- 18
- Rating
- 3
P
PrintablesMr.Strelok
Korsar 60mm mini moderator for 5,5 or 6,35 (.22/.25)
толщина слоя для печати М12х1 по моему мнению - 0.2-0.24 три периметра для жесткости конструкции. Но чем меньше конкретно участок резьбы - тем лучше.
- Downloads
- 169
- Likes
- 12
- Rating
- 0
P
PrintablesJustinBridou
Modérateur de son/Sound moderator for Hatsan Flashpup-S 1/2 20 UNF (4.5mm or .177) Impression rapide et économique
Attention, nouveau modèle ! Après 200 tirs avec l'ancien, l'avant du modérateur a cédé sous la pression. Attention new model ! After 200 shots with the old, the front of the moderator has given in under pressure.Attention new model! After…
- Downloads
- 163
- Likes
- 16
- Rating
- 0
P
Printablesagibson2
Slip-on moderator for Umarex Notos
This is a moderator for the Umarex Notos air gun. This is not for firearms use and only fits on the Notos air pellet gun. This slides over the built in moderator/barrel end of the stock Notos air gun and does not require any modifications…
- Downloads
- 153
- Likes
- 17
- Rating
- 5
P
PrintablesCrooksUSA
Crosman 2100B Air Rifle Moderator
2/12/25 Update - Check out my new Crosman 2100B moderator mount. Print as many baffles as you want; the more baffles, the greater the sound suppression. Make sure to print one endcap. The barrel adapter is designed to be secured with a…
- Downloads
- 148
- Likes
- 22
- Rating
- 0
P
PrintablesWRotter
AGT Vulcan 3 Moderator Insert
Original AGT moderator comes with a spring wrapped in felt. It does it's job and since it's a pain to disassemble many tend to leave it as it is For those that has disassembled theirs, this is baffled insert with recesses for felt strips…
- Downloads
- 145
- Likes
- 4
- Rating
- 0
P
Printablesrobertoamd
GAMO CFX MODERATOR .177 (4.5mm)
GAMO CFX MODERATOR .177 (4.5mm)
- Downloads
- 136
- Likes
- 10
- Rating
- 0
P
PrintablesWRotter
AGT Vulcan 3 Moderator
This is a simple moderator design that utilises original front cap of the original moderator. Original moderator is a hollow tube with a spring wrapped in a carpet so I thought to make something simple but a bit better Using original…
- Downloads
- 135
- Likes
- 5
- Rating
- 0
P
PrintablesДмитрий Калинин
Moderator korsar
Доп модер вместо родной вставки в корсар, перед использованием обязательно пройтись сверлом нужного диаметра
- Downloads
- 119
- Likes
- 16
- Rating
- 0
P
PrintablesCuriosityKT
Gorilla Tag Moderator Stick - No overhang
I took the original model and removed the bit that was causing an overhang. I also resized it for my print bed.
- Downloads
- 119
- Likes
- 1
- Rating
- 0
P
PrintablesJustinBridou
Modérateur de son/Sound moderator for Hatsan Flashpup-S 1/2 20 UNF (4.5mm or .177)
Modérateur de son/Sound moderator for Hatsan Flashpup-S ½ 20 UNF (4.5mm or .177) Fonctionne très bien, la ligne de raccord du nid d'abeille n'apparait pas après avoir généré le G-code. Je passe un coup de taraud M12 en pas de 1,25 pour…
- Downloads
- 112
- Likes
- 8
- Rating
- 0
P
PrintablesCrooksUSA
Crosman 2100B Air Rifle Moderator / Muzzle Brake
I liked the Moderator/Muzzle break from Dan , but the threads would snap off anytime I would pump my Crosman 2100B air rifle, so instead of just relying on the threaded part to hold a moderator on, I added a shrouded portion to snugly…
- Downloads
- 110
- Likes
- 13
- Rating
- 0
P
PrintablesRich
FX Impact Moderator Baffle
Remixed the baffle by Grips and made it fit into the stock moderator (.22 700mm barrel). I wrap the baffle in strips of foam from JSB pellet tins. When installing, the pointy end of the funnel inside should point towards the rifle. Drops…
- Downloads
- 108
- Likes
- 6
- Rating
- 0
P
PrintablesAnton
Moderator 60mm for Korsar 4.5mm
Moderator 60mm for Korsar 4.5mm, printable without support.
- Downloads
- 96
- Likes
- 7
- Rating
- 0
P
PrintablesCVABuck
AirForce Texan LSS Big Quiet Moderator - Open Beta
OPEN BETA TEST - USE FILES AT YOUR OWN RISK - PLEASE PROVIDE ALL FEEDBACK, GOOD, BAD, OR OTHER. THIS IS NOT A FIREARM COMPONENT AND CANNOT BE READILY ADAPTED TO BE Open Beta test of my AirForce Texan LSS Moderator. Read the readme.txt…
- Downloads
- 96
- Likes
- 12
- Rating
- 0
P
PrintablesKisolov
Korsar moderator's bayonet connection
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. The product is designed not only for the Korsar pistol, but also for any pistol, the silencer of which is mounted on the m12x1 thread.…
- Downloads
- 91
- Likes
- 13
- Rating
- 0
P
Printablestopoyete
Modular airgun moderator/silencer for m10x1 thread.
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…
- Downloads
- 74
- Likes
- 5
- Rating
- 0
P
PrintablesAnton
Moderator-Waldgun-5.5mm
Вставка для модератора 100 mm Waldgun 5.5mm Для модератора 100 мм наилучший результат дают 7 рассекателей. Втулку можно заменить на пружину 17.5x40x1.2
- Downloads
- 67
- Likes
- 9
- Rating
- 0
P
PrintablesKisolov
TPU flap in the sound moderator
I apologize for making a mistake with the location of the chapels. But I really don't want to redo it. The valve is under .22 cal for the moderator per 40x1,5mm pipe. I recommend printing the flap from a TPU filament. The material for the…
- Downloads
- 66
- Likes
- 10
- Rating
- 0
P
PrintablesFaceHaver
Silencer/Moderator Adaptor - two part
Sound moderator/Silencer/Suppressor adaptor for airgun. 2 pieces. Requires 4 x M3 x 28mm (or longer) bolts and nuts. To assemble, put the insert (Insert.stl) part into the adaptor part (Adapter.stl). Once tight and secure, put onto the…
- Downloads
- 66
- Likes
- 7
- Rating
- 0
P
Printablesk4rl5m1th
Air Rifle Silencer / Moderator / Suppressor - Barrel mount / No thread. Always aligned!!. F3D included.
Barrel mount silencer / moderator / suppressor, for non threaded barrels. (F3D inlcuded to fit all). I tried a few other existing barrel mount stl's but one slight knock and they were no longer true so the pellets smashed the end of the…
- Downloads
- 58
- Likes
- 21
- Rating
- 0
P
PrintablesNon Timebo Mala
Air Venturi Avenger Moderator Insert
This is the third iteration of a design I did for the Air Venturi Avenger. The v2 model was shooting 1/2" sized 16 shot groups with unsorted JSB 25.39 grain pellets at 41 yards outdoors. This model is equally accurate and a bit quieter. I…
- Downloads
- 57
- Likes
- 6
- Rating
- 0
P
PrintablesAnton
Korsar Moderator 60mm 4.5mm v2
Вторая версия модератора 60мм 4.5мм, добавлена защита от выламывания при боковой нагрузке. Печать без поддержек, пластик ABS/PETG/SBS
- Downloads
- 55
- Likes
- 3
- Rating
- 0
P
PrintablesArcticNemo
Crosman 13xx Moderator Adapter and Core
You must add a sleeve and cap to contain the telescoped baffle core. Final baffle is tight and will need touchup with a drill, especially if used for .20 or .22 caliber pellets. This is probably best as a learning tool and experimental…
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
Printablesf1nal777
Korsar compact 6.35, kral, hatsan moderator adapter
!!!Внимание !!Чтобы полностью собрать модератор вам обязательно нужно распечатать модель по ссылке https://www.printables.com/model/1108348-moderator-korsar !!! Даная модель это один из вариантов крепления на пистолеты krugergun korsar и…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesRJCDesigns
Push fit Moderator/Silencer for Weihrauch HW35
I have adapted this .22 Silencer/Moderator by "elseb" to a push fit that fits perfectly on a Weirauch HW35 air rifle, however it should fit any 15mm barrel. If there is any interest i can make a version that can be tightened with a bolt…
- Downloads
- 48
- Likes
- 5
- Rating
- 0
P
PrintablesAgameg
Air Venturi Avenger Moderator v2
This is an evolution of my moderator design for the Air Venturi Avenger. Features cone-type air stripping mechanism instead of the original K-baffles and added volume on the exterior portion of the moderator.
- Downloads
- 36
- Likes
- 3
- Rating
- 5
P
PrintablesAnton
Korsar moderator protection
Korsar moderator thread protection. For original moderator PCP Krugergun Korsar.
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesStarchu
Yeeps Moderator Badge
Credit me if put into any sort of media
- Downloads
- 29
- Likes
- 0
- Rating
- 0
P
PrintablesDocScott
Vacuum Moderator for Shop Vacuum
I purchased a new shop vacuum and found that the vacuum was a bit too good for some of my needs in my woodshop. (It was collapsing the 5 gal plastic dust collection bucket on my in-line cyclone.) I printed a connector that allow me to…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
Printablesthn00dle
JTS Airstryke Carbine moderator
Disclaimer: Laws regarding airgun shrouds and moderators vary by country and/or local jurisdiction. Although it is legal in a lot of areas, make sure to check if it is legal before printing. This is not easily adaptable for any firearms…
- Downloads
- 27
- Likes
- 4
- Rating
- 5
P
PrintablesAngel
Crosman Crusher .22 Moderator and Spacer
Moderator and shroud spacer for your crosman crusher .22 use 50% infill and I would use at minimum PLA+, results will very. You don't want to grab this while cocking your rifle, was not designed to handle this type of force and will…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesSergey Chizhikov
Sound moderator (Inside the muffler) for SR-1000R SnowPeak (Artemis, ZR-arms, Strike One, Black Strike)
Just take out the factory one and insert the printed one. The chamber walls are more rigid, the first two have bypass holes. I thought the accuracy improved with this, and the sound was almost unchanged.
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesOutdoor3dprinter
Umarex Iconix Moderator
The Umarex Iconix Is a great entry level PCP but its extremely loud, to fix this I have designed this slip on moderator. I designed this for the 22 caliber version but it will work on the 177 caliber version as well. I 3d printed mine out…
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesOutdoor3dprinter
22 Cal 1/2-20 airsoft/pellet gun moderator
I have designed this as a 9 baffle moderator for air rifles. While this will technically work for 177 Cal it is optimized for 22 Cal air guns. This is designed for pellet guns only DO NOT USE IT ON A FIRE ARM AS IT MAY EXPLODE! Check your…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesAngel
RCO PINTY Moderator adapter tool
I designed this tool to help with the removal or installation of Pinty's 1/2x20unf moderator adapter that fits on the Stiker and Thumper models. I made mine with ASA, 4 walls and 20% infill but have also tried it with PLA and worked fine.
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
Printables
RCO PINTY Moderator adapter tool
I designed this tool to help with the removal or installation of Pinty's 1/2x20unf moderator adapter that fits on the Stiker and Thumper models. I made mine with ASA, 4 walls and 20% infill but have also tried it with PLA and worked fine.
P
Printables
Modular airgun moderator/silencer for m10x1 thread.
Fully 3D printed airgun moderator/silencer designed for a Diana Chaser, but fits other M10x1 threaded air guns. The end cap can be easily removed by finger friction, in case it gets too tight the included wrench makes it easy to remove.…