16,150 models
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
One more Thing from the Addams family Designed for unsupported printing with high detail. Happy HALLOWEEN Print instructions No support needed
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
There is not much to write about this ship. World famous and unique to this day. The RMS Titanic is my first ship of the 1:1000 series. This is how history comes alive and can be touched. I have given this model a stand and hope that it…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This cute bear figurine is perfect for a quick print, taking only 25 minutes to complete! Designed with smooth lines and simple shapes, it’s an ideal project for both beginners and seasoned makers. While minimal supports are needed for…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…
Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant
Chickens not included! This is not original with me - just a print I made for someone from the file here : https://www.thingiverse.com/thing:4614774 Print instructions Print in PLA using the 3mf file provided; otherwise : 0.2mm layer…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Simply print with the Bambulab default settings 0.2 in PLA. For coils 55 mm x 64 mm and 50 mm x 64 mm Printing time approx. 1h49m Use 6 x used AA batteries The screwing revised . Added empty containers to fill with e.g. plaster.
Print approx. €4.59–€5.60 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
Handy ruler with extras 📏⚡ • Holes for measuring wire & component diameters 🧰 • Connector size templates 🔌 • Basic electrical symbols ⚙ • Centimeter scale for precise measurements 📐 Perfect tool for makers and electricians! 🛠✨
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Printing assembly instructions below! The HMS Hood, the first of the Admiral-class battlecruisers built in 1916 for the Emergency War Programme. Since then it has been a feared battleship and a proud jewel in the Royal Navy. Sunk by the…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
Audi R8 LMS Scale 1:50
Print approx. €5.54–€6.77 excl. taxPreliminary estimate for one variant
Hey there! After I noticed release of the contest, “Contour Duplication Tools” was released, I spent a few days creating a simple, yet effective design. I present to you a very simple, customizable, fully 3D printed compass & wood…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
I have designed this box for condoms, tampons and stuff which is almost perfect: https://www.printables.com/cs/model/371842-smooth-pocket-case-for-condoms-durex-tampons-etc The only downside is that you have to trim the corners of condom…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Print approx. €11.33–€13.85 excl. taxPreliminary estimate for one variant
Hello drummers, Hello hobbyists, Hello everyone else, this is the first Version of a traditional 5a-sized drumstick, which I designed. With this project, I wanted to see how far I could Push 3d- printing and test out if I could actually…
Print approx. €14.99–€18.32 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Holder for food plastic bags several at once. It prints really well. It is necessary to use supports! If you are interested in my work, the links are here:…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET
The Compact Muon Solenoid (CMS) detector is one of the big four experiments of the Large Hadron Collider (LHC) , the world’s largest and most powerful particle accelerator. The LHC is part of CERN 's accelerator complex in Geneva,…
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
With this print it is necessary to have a printer capable of printing multiple colors for the green stem. My printer (the Bambu P1s) can print this without supports but it depends on the printer you use. feel free to adjust whatever and…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Simson S51 Motor zum drucken. Der Motor kann auf die gewünschte Größe skaliert werden. Viel Spaß beim drucken :-)
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
So this is MK2 of my Samsung Galaxy Fold 3 case with a built-in stand. I added a matching car mount plate which I use in my daily commute… Just glue the plate to any mounting system you have in your car. I use my own custom mount for…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for PETGSource material: PET
Everyone who owns this wireless charger from Samsung certainly knows this problem. You finally want to sleep in the evening and put the phone on this charger without looking... And the next morning you realize with fright that the phone…
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Better than cardboard Wyrmspan Resources Wyrmspan is a 1-5 player game from Stonemaier Games where you build and explore a cavernous sanctuary for dragons, based partially on the popular game Wingspan. I have created 3d printable versions…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This is a remix of IXPatch's excellent remix of Crafty Sven's excellent articulated guardian, with detachable arms.
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for one variant
This is not all of the ACC Teams - as people request the additional teams I will do my best to respond. I will fill in the missing teams as they are requested - Enjoy! All gcode files are setup for manual color changes
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Simson Tuning Lüfterrad für alle Modelle mit einem zwangsgekühlten Motor. Mit einer neuen VAPE Zündanlage. Wichtig! Das Modell passt nur auf das Polrad der VAPE Zündung, nicht auf die Originale Unterbrecher Schwungscheibe! Die Druckdatei…
Print approx. €5.36–€6.56 excl. taxPreliminary estimate for one variant
Hello there and greetings from Austria! Today i wanted to share this design with you all. This object ist meant for the charger that is shipped with this watch. If you want to know if your band fits over this stand , then here are some…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for one variant
The Crimson Firehawk appears prominently in Star Wars: Young Jedi Adventures . This model has versions for its appearances in Season 1 and 2. On the Season 2 version, the engines can rotate, the wings can fold up and down, and the nozzles…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Set of Lego platforms with sizes: 2 x 4, 2 x 6, 2 x 8 and 2 x 12. Details are printed upside down to minimize print defects. Print instructions All models are designed to be printed upside down with layer height 0.15mm.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…
Print approx. €7.57–€9.25 excl. taxPreliminary estimate for one variant
Addams Family Munster Coach : Crash Derby Cars All versions have an extra version of just the car included. Remove if not needed.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Hi As a big thanks to Everyday Astronaut for the many interesting videos to us people who love space, I created his logo as a kind of 3D coat of arms. Is one of the most ambitious and complex projects I have done so far. I have not only…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for one variant
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG Perimeter hatte ich auf 4 gestellt für die Stabilität.
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Das Modell besteht aus zwei Teilen: Schlauch-Adapter , um einen 32mm Schlauch an den Wasserabfluss des Whirlpools zu hängen. Ablauf-Stutzen , der im Pool in den Ablauf gesteckt wird, damit der Pfropfen den Ablauf nicht verschließt und das…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
I was unsatisfied with the backshells available for download, and I had none handy, and I figured it wouldn't be a tough build. These clamp together nicely and are locked together by the SHCS when assembled. They fit Tayda D-sub…
Print approx. €3.48–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
Hamster burrows by popular brands are massively over-priced (€25 for a couple of sheets of laser-cut balsa wood?) so I created this simple hamster-hide that you can 3d-print at home on even small printers like the Prusa Mini! Also…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
A filament indicator for Prusament NFC spools . Update 2026-01-27: Removed 'feet' versions, added TPU. Update 2026-01-14: Uploaded V2. On V1 the second and third number of grams were swapped. It fits on 2 places on each sides of the…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Moved to GitHub 2024-01-10: All future updates will come through GitHub: https://github.com/jon-le0234/DoomScroller The work started growing too fast to manage two projects each on Thingiverse and Printables, so moved everything into one…
Print approx. €0.91–€1.12 excl. taxPreliminary estimate for one variant
These creepy hands are nice decoration when on the base. When attached to the handles, they can be used at Halloween, in cosplay, and also make good back scratchers! If you like these cool, err I mean creepy hands, check out this dice…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Whenever my gym sack is empty, the cords no longer hold on my shoulders and the gym sack slips around. With the help of this clip, that can no longer happen. Fixing In contrast to other clips, this one does not always have to be under…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Highlights: MERV 13 filter maintains a good airflow rate while capturing the majority of particulates. HEPA 13 is available for extraction applications. Reusable cartridge uses low-dust coconut-shell activated carbon. Can be used as a…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A Satsana variant that works with Dragonfly BMS and a 5015 fan with the ABL mount removed as i couldnt find any without the ABL so i removed the one from this and thought others might need one aswell. I reccomend printing this with the…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Lesser coat of arms of the Czech Republic.
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
I was looking for something smaller for mounting the superpinda. Lower screw threads into the plastic. If you use a longer screw it can steer on the lower hole of the fan.
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
I have a couple of small accessories for an old Dyson DC07 in the house, and wanted to start using the short Dyson brush nozzle (pictured) on my Shark cleaner because its bristles are stiffer and more durable - the Shark brush is too soft…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant
BOM Inserts version: M4xL6.7xOD6.8 Brass Flange Insert 10 M6xL11.7xOD8.7 Brass Flange Insert 4 M4 NUT ISO 4032 2 BOM Nuts version: M4 NUT ISO 4032 12 M6 NUT ISO 4032 4 BOM 2mm Monitor plate: M4x16 SCREW ISO 10642 2 M4x8 SCREW ISO 10642…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for PETGSource material: PET
A protective case for your Samsung Galaxy A25. It's designed specifically for PLA, unlike all the other TPU ones. The hole for the side buttons is large enough to make the fingerprint reader usable. All the holes are cut all the way to…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
es gibt eine größer und eine kleinere Version Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Infill: 0% Schöne Weihnachten!
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Literally same model that I remixed but adding just a text on the bottom side of the hamster its name aka TOMBIK. (FAT)
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
UA Coat of arms, larger version, check dimmension pictures for exact dimmension of file, on the emblem is used small filet to enhance plastic effect. Scaling in slicer should work well also. Color change happening in 6,20 height, included…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
The internal plastic spring breaks on the Phillips DreamStation BiPAP which causes the door latch for the water chamber to not stay latched. A few screws allows access to the old spring that can be completely removed and replaced with…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for PETGSource material: PET
💬 Summary A set of protective lens caps designed for the Samsung Galaxy S24 Ultra . These caps fit over the three main camera lenses to prevent scratches, dust accumulation, and impact damage. A simple, fast print that adds a layer of…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Print-In-Place Clamshell Container for Multi-Material or Single Color Prints Please click the “Like” button above if you like this model, and if you print it please share a make/comment - I love seeing them and it keeps me motivated to…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
Nachdem es mein Bowdenzug vom AMS Lite geschafft hat den Pause Knopf auf dem Display zu betätigen habe ich diese Halterung gebaut. Schön ist die nicht, aber sie erfüllt ihren Zweck ohne irgendwas an den Drucker selbst anzubauen. Das eine…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
print with PLA Model might warp, because it's so flat and wide/long, so corners might bend and detach from bed - destroying the print, so make sure you have cleaned bed and have good bed levelling. Holder is sticked to the glass wall with…
Print approx. €8.67–€10.60 excl. taxPreliminary estimate for one variant
This is a holder for Samsung Galaxy Tab A9 Lite SM-X110 tablet, which you can screwto the wall. Power would come from the back. I would recommend getting angle power cable. Description on Youtube:
Print approx. €8.16–€9.97 excl. taxPreliminary estimate for one variant
I've had times when the phone did not seat on the Trio charger right and did not charge, so I designed this to ensure that it is in the right spots for charging. I modeled it to fit my S22plus phone, not sure if other phones are the same…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
Nachdem bei einer meiner Felgen der Winterreifen das Logo auf der Nabenabdeckung verloren gegangen ist, habe ich diese zweiteilige Abdeckung mit Teslalogo für die Felgen konstruiert. Sie sind für die Felgen MSW (OZ) 71 8.5x19 5x114,3 ET35…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Wallmount for two Samsung T5 external SSD
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
This little cog from the Emsa Basic Salad Spinner seems to brake quite easily: … so I made this replacement part. Works well again, don't know yet how durable it will be… Printed in PETG, supports are needed like shown in the 3mf file.…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Will you still need me.. will you still feed me… when I'm 64
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for PETGSource material: PET
MSLA Cyclop Printer ! If you like my work, you can help me by buying me a coffee, thank you! https://buymeacoffee.com/guillaumehy or paypal.me/guillaumehaouy I should point out that I am a 20 year old student, it takes me a huge amount of…
Print approx. €6.67–€8.16 excl. taxPreliminary estimate for one variant
Ce support permet de recharger une montre Samsung Watch lorsque l'on a mis un bracelet qui ne s'ouvre pas en 2 parties
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
Description The gramophone horn works surprisingly well! I have attached the individual STL files of each part in the assembly, which only need a few drops of super glue to attach. In addition, the cradle may fit other Samsung phones with…
Print approx. €6.68–€8.16 excl. taxPreliminary estimate for one variant
Use this device to push in MSR mini groundhog stakes without hurting your hand. Then after removing the stakes from the ground unscrew the insert and use it to scrape the mud/dirt off of the stakes.
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
I made this model for a samsung tablet (10") to fit in a Volvo XC60 car. Support needed. See my gcode for angles an support inspiration. It works ok without editing or damaging any panels in the car. Easy to put and remove.
Print approx. €4.95–€6.05 excl. taxPreliminary estimate for PETGSource material: PET
Wall mountable (Command strips) phone holder for Samsung S9 (May fit other devices) when the device has a case on. The build will require supports.
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Model of the Nihil Stormship which appears in the Star Wars: The High Republic Comic (2021-2022) #09 and #10. Dimensions Length Width Height 68mm 85mm 29mm The scale should be somewhere around 1:270. But this is just my best guess,…
Print approx. €3.92–€4.80 excl. taxPreliminary estimate for one variant
I have designed a super slim back cover for the Samsung Galaxy M52. Feel free to make one for yourself. It has a small form factor as compared to thick silicon cases. Also, the sides are based on the latest Pixel, S series, and iPhone…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
To avoid that metallic objects touch the connector, I designed a small lid to stick in place of the LA connector when not in use. I used PLA to print the thing, but PETG is probably better due to more springy behaviour. No support is…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Atomstack wall mount for space-saving storage of the laser cutter. Needed for two holders: 10x M4 14 10 x M4 Nuts 1 x 4mm poplar plywood sheet DIN A4 4 x 6 wall plugs and screws The Laserfile.zip contains all files for the laser cutter to…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for one variant
for English, see below Zimtsterne kosten viel Zeit: den klebrigen Teig ausrollen und dann irgendwie die Glasur draufbekommen, ohne dass sich der Stern bewegt oder krumm wird. Alternativ kann man die ganze Fläche vor dem Ausstechen…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
Replica of a clip used in some Samsung fridges. OEM Part #: DA61-04809A A brim is suggested if running off multiples.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the iconic Hoonicorn build and American Racing VF503 design, these rims are a stylish upgrade for your Mini-Z. They print cleanly with a standard 0.4mm nozzle—just be sure to enable supports. For best results, I recommend…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
A simple holder for the Samsung Galaxy Watch 4 for an IKEA Skadis board. I didn't want to always have the watch with the charger on the table, so I remixed this file and added the holders for the Skadis board. I also made the bottom a…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
Print approx. €5.12–€6.25 excl. taxPreliminary estimate for one variant
I designed this my self, i wanted roughly a mouth shape upper an lower jaws. Both halves have lids held with hinges and clips. The two halves held together with 8mm x 2.7mm cylindrical neodymium magnets. I printed this using black tough…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant
Hello, Today I have 3 figurines of girls in swimsuits for you. They are suitable for coloring, for diorama, or just for an exhibition. My children love these figurines. For proper functionality, you need to use a Print Profile! I used…
Print approx. €11.37–€13.90 excl. taxPreliminary estimate for one variant
I designed this secrid wallet case after I lost my secrid wallet abroad and luckily found it again between the seat of the car. Print this with support as in the picture and I recommend to use PETG. The case fits exactly so it won't come…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET
I made this at home, I found bay blades in my old toys and made this little stadium. 😊
Print approx. €8.21–€10.04 excl. taxPreliminary estimate for one variant
For the construction of my enclosure, I designed 3d printable sliding blocks. Why are these special, you ask? Quite simply, you can also insert the slot nuts afterwards. Because of the flexible pin the sliding block stays in place. The…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Universal Mounting System V1 (UMS V1) is set of mutually compatible attachments, hooks, holders and clamps used to mount various devices and accessories on the wall, beds and other objects. The UMS allows easy attachment, removal and…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Wie zu sehen ist, setzte ich die Klemm Stopper für meinen Sonnenschutz auf der Terrasse ein. Da die Klammern die den Sonnenschutz halten sollen, bei Wind nicht mehr richtig halten, musste etwas neues her. Die Stopper können ohne jegliche…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
wall mounted stand for samsung TV remote. 1 hole for 4mm countersun screw.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
This insert is designed to fit Banangrams in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy and…
Print approx. €4.81–€5.87 excl. taxPreliminary estimate for one variant
A simple yet functional bit storage solution for the Williams WRS-1 Ratcheting Screwdriver. It may also fit certain Snap-on ratcheting screwdrivers due to them being similar in design. Holds 6 standard 1/4 inch screwdriver bits and fits…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Cookie Cutter of the Coat of Arms of Slovakia. Designed in Affinity Designer, converted to 3D and mirrored for proper cutting (though, I guess, this is symmetrical, so I did not really need to do it, but I did anyway) in FreeCAD.…
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for PETGSource material: PET
This is a longer version of the original FMS Pitts V2 140cm accu tray. It supports now 6S 5000mAh Lipo accu to get the correct COG without adding too much weight to the tail.
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
Hello, Welcome to my profile, full of models and miniatures :-) I have here for you Hoops for paper spools for filament Pro AMS Thanks to it, the spools unwind much better in the AMS system and do not jam. For proper operation, 2 pieces…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
A simple puzzle I designed myself: The objective is to use these pieces to form a plane figure with an axis of symmetry. There are 2 closely related solutions. See if you can find both!
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Cup with Lid for Small Items – fits VW Polo AW (from 2017) The VW Polo doesn't offer much storage space, so I designed this simple insert for the cup holders. It's perfect for keeping coins, small change, keys, or other small items…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
This is a set of cubarithms, a tactile maths aid based on Braille, designed for arranging calculations physically on a grid. In standard use, cubarithms, invented by Alphonse Oury in 1886, help with learning written addition, subtraction,…
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
stand for the MST jimny
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for one variant
