695 models
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Small but very useful print. Allows you to measure with multimeter/probe on breadboard/Arduino. Print settings: Speed : 30mm/s Walls : 3 Infill : 0% Build plate adhesion : Brim Supports : NO
Screw This! Wall multimeter holder comfortably holds any generic multimeter and probes by gently holding them upright! Requires: 1x Multimeter 2x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 2x Screw…
This is a replacement stand for my Fluke 187/189 multimeters. They used to be sold on ebay, but no longer, so I created my own. I recommend PETG, as it will be flexible and robust for normal wear and tear. I used Overture PETG 1.75…
Holder for a multimeter on a multiboard using the multiconnect connectors Used a 0.4 nozzle on 0.2 layers with 15% infill
I needed to test some button cell batteries but my cheap multimeter had no built in load resistor. This super simple tool help clamp a resistor and dupont jumper wires to the probes. I used male-male dupont wires, removed the plastic…
Remix of @forsaken_candy 's multimeter mount for Emos MD-310, or any multimeter that fits dimensions up to 74x32mm(length x width)
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
I wanted to put my DM830D multimeter on my honeycomb storage wall, so i made this part. Sharing it in case someone has the same need…
A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…
I made this hardcase for my multimeter and the accessories, but can used for other purpose
A remix of the parametric toolbox to hold the Aldi Ferrex multimeter. The multimeter dimensions are: 175mm x 95mm x 45mm. The box has space for the manual underneath, the prong things on the right, and some sticky foam from bunnings to…
This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…
Hole for M3 hardware. No supports needed.
Designed around the low cost Kaiweets KM100 model multimeter. The cutouts allow storage and use while mounted. Print using supports for the pegs on the back of the holder.
I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped. Even though I redesigned the…
Remix of Libor z Radotína multimeter holder to fit the original Honeycomb storage wall and I also had to make a longer version to fit my multimeter (UNI-T UT133B). Uses M4 insert to attach it to the wall. Link to a collection of my other…
For Multimeters with size of ~90x~42x~200. Includes cable Routing, Probe- and Thermistor Storage. Sources Included. My rubber-sided multimeter with 90mm width sits tight in there, i can turn the knob without it moving.
Pegboard holder for a Multimeter, One with the Pegs already in it and one with the pegs as separate parts (good if you just want mounting holes instead) Version 2: Has the PEGS BUILT IN! and Custom in model SUPPORTS for the pegs!! Print…
A nice and sturdy case for your multimeter or something else. Unscaled the max. measurements for the multimeter are 200x100 mm. The outer size is max. 208x170.6 mm (lid). Included is a version with and without "Multimeter" at the outside.…
Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…
A simple holder for a multimeter. Built for the multiboard using the multiconnect system. Same/similar design as https://www.printables.com/model/781857-multiboard-multimeter-mount except sizing of large side is: 80w x 40d x 80h.
A simple mount for a multimeter, fits up to up to 94x42mm and has additional slots for leads or other accessories.
Link to the crappy multimeter I have: https://www.clasohlson.com/fi/Yleismittari-UNI-T-UT132E/p/Pr365256000 I've printed a 1x1x12 plain bin to hold the probes/cables in place. Use magnets + weighted baseplates to prevent these from…
Simple box for multimeter DT830
[Updated version 2.0 here] Print upright with support enabled. Very important: the inserts are meant for ikea skadis pegboard, not tested on different other pegboards. 13 July 2023 Update: If you have printed the original holder, there…
A holder for a multimeter up to 94x42mm with additional holders for the test leads.
A simple holder for a generic Multimeter, 72×52mm box size and ⌀10mm Probe holders. Builtin support for the hooks that easily snip off with flush cutters, no other support needed. Walls are 1mm Derived from a Skadis Storage Box by…
This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…
I liked @TrueShocker ‘s Multimeter design however my old multimeter was slightly too large to fit, so I created a slightly larger holder from scratch, based on on @TrueShocker ’s design. Enlarged the holder area and also the holes for the…
In this remix, the Parkside brand logo was added and custom made to fit the multimeter just right, also leaving a space at the top and bottom to put foam so that the tool is not damaged. Necessary materials 6 m3x30 screws.
This multimeter mount was designed specifically for an AstroAI DM6000AR. However if might work for other multimeters as i have not tried.…
Multimeter on the wall, upright and ready to use. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Frees up space on your workbench…
I wanted to create a multimeter holder for my Skadis board in which all the buttons are still reachable because most of the time I only need for 1 or 2 quick measures. I also added a cable holder to the right so everything can be tucked…
This is a Stout MultiMeter Desktop Stand that also has a stow place for the leads and cables. The multimeter sits secure in a slight rear angled recessed mount. I have tried countless stands from different sites and all kept falling over…
As I wanted my multimeter in a drawer, and all I saw online was holders for multimeters standing tall. So then I made this :) I made the general shape of the bin pretty generous, so I'm guessing most normal multimeters will fit. Aswell as…
I couldn't find a multimeter holder that fit my model so I made one. I copied Ian Noriega Nunez's probe attachment idea. The inside is 69mm x 35 mm. Prusasliser gives a warning about the overhangs but it printed perfectly on my MK3S+.
I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…
A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…
This tray is designed around an Extech MN16A multimeter but it can work with others. Requires 2 of my universal peg plates . Print with supports. The holder could be used with other pegboard systems if you design peg plates for it.
I made this little clip on backpack to wrap the wire of my multimeter leads around to keep things a little more tidy. Super handy print jajaum3d! top notch work. I fixed the two peices with some M3 flathead screws, but you could also just…
Holds a multimeter to a pegboard. Works with my particular multimeter which is slightly more than 2 inches wide. Can also work with multimeters that are exactly 2 inches wide (by printing two of the same part), or meters that are slightly…
Multimeter Halter Voltcraft VC130 IKEA Skadis
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/7fvnORfahl8-kaiweets-multimeter-pegboard-holder Print…
This is a remix of the multimeter holder by TrueShocker. I just made it curvier with less harsh corners to fit the aesthetic of my other HSW holders. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part of…
This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall It should be large enough to hold most multimeters, I designed it to be a snug fit with the Fluke meter I have.
Thanks to @QED_Maestro for his brilliant idea of simple tweezers for one handed measurements. Now optimised for BSIDE DMMs. Compatibility: A10 S10 S11 S20 not with S30 / S30X In the photo is the RC ;)
This is a multimeter probe holder for 4 probes. I have included the Fusion360 design files for easy remixing.
This is a remix of the popular parametric Rugger Box design by Whity. I used the author's Fusion 360 CAD file to adjust its size and then added a custom liner that fits the outline of the multimeter. The lid was also modified to provide…
I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…
Just a quick remix to allow herman_v96's multimeter mount to fit an IKEA Skadis board. The universal hook from CSD_Salzburg is also included. Just print the mount and two hooks and you are good to go! Print Settings Printer Brand:…
Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. My multimeter is about 70mm wide and 26mm thick.
Very minimal supports are needed for the mounting bracket. This is optimized to save space on the wall. It also has storage in the rear. You can store the lead cables there.
Created this HSW holder for my multimeter. Holds a Uni-T UT61D and similar sized multimeters nicely. Unlike other holders, this one is rotated by 90 degrees to reduce the footprint on the wall. Height with multimeter 18cm, depth in front…
A holder to attach my Amazon Commercial Multimeter to my honeycomb storage wall. I have taken idea and design from TrueShocker's model, which unfortunately was too small for my multimeter. This model is a re-design from scratch, though.…
Storage for multimeters of a “Shield” style shape (modelled after a Etekcity Digital Multimeter). Side clips allow loose storage of probes with compartment for loose cabeling. Rear contains x2 Hex Pegs for HSW
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
The perfect stand for the Aneng 622B on your desktop. In the version in photo, the upper Probe clamp is present. In the STL there is also a lower clamp to give the probes more stability. Print this stand on the left side with 20% infill…
I modeled this to replace misplaced covers for my Fluke 115 Multimeter probes using another meter as reference. Printed in Octave black PLA and Polymaker red PLA. Print Settings Printer: Cetus Rafts: Yes Supports: Doesn't Matter…
This is a dead simple pegboard / wall control mounting cradle for my trusty Craftsman 82029 Auto-ranging Multi-meter. This is one of my first designs from years ago and could likely use some refinement - but it's been pretty popular on…
Design goals: store the multimeter with connected measuring cables in a box cover of box shall have a lock multimeter box shall stand stable if cover is opened to perform measurements Design: All designed parts of the box are printed out…
Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/htkaNsVCoCQ-kaiweets-multimeter-multiboard-holder Print…
Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
Just a simple rectangular box with slightly rounded edges (1mm radius). Needs 2 x M3 inserts in the Honeycomb Storage Wall ecosystem. No supports needed.
Update 5/29/2025 I made a slight tweak to the model that reduced the floor of surrounding area around the tool. I lowered it to save on material, reduce overall print time, and make it easier to get it out of the bin. I've kept the…
Simple holder for my Multimeter, fits securely and has little holders on the side for the test leads. Mine is printed with PLA and it fits perfectly. You may need to resize slightly for your own multimeter.
Ich habe einen Halter entworfen in dem das Messgerät mit angesteckten Kabeln untergebracht werden kann. Die Fachgröße für das Messgerät beträgt 87x36 mm.
As the name suggests, this quick print converts your multimeter into a one-handed tweezer-style measuring device. The tips are held with friction which is very strong due to the taper on the tips and the slight elasticity of the material.…
Recommended settings: 4+ walls and 100% infill for best strength. Please let me know in the comments if yours broke and where it can be reinforced!
It took me over a year to finally stop procrastinating and model up a bin for my Klein Tools MM400 Multimeter. The thing is just so hard to measure. I tried scanning it a few times but was never happy with the results. I finally decided…
2-piece holder for a (tiny; crappy; can't remember the brand) multimeter. Instructions: Print the 2 pieces. Print the M4 HSW Insert. Combine the Clip to the Insert using M4x8 screw and nut; this goes onto the wall. Mount the Multimeter to…
Remixed version for cheap multimeter XL830L
I'm no expert but it works well. Remixed using the Klein Multi-meter bracket from Thingiverse created by user alsch - https://www.thingiverse.com/thing:4262298. As per alsch “This mount is compatible with Klein MM300, MM400, MM600, and…
All of the other HSW multimeter mounts couldnt fit this absolute unit of a multimeter. I took the hollow honeycomb STL from the original files and appended three of them to the back of a the large bucket in Blender, in my opinion having…
This is a gridfinity storage for AstroAI DT132A Multimeter, it fits tight I have no problem with the multimeter staying in the holder when using it. I have made a hole for the temperature cable at the back and a holder where you can put a…
Multimeter holder / mount for the IKEA Skadis pegboard. Includes parametric FreeCAD file that you can use to adjust the size of the holder to match your multimeter. Instructions on how to customize the dimensions for your multimeter here.
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
This is a container for the Ikea Skadis pegboard to hold the Brymen BM235 multimeter. Dave Jones from EEVblog sells a branded version to support his Youtube channel. I originally designed it so you could leave your leads connected, but…
Precision Multimeter Tweezer for SMD and small components Introduction Traditional multimeter probes can sometimes be inconvenient when measuring small components or testing printed circuit boards. To address this, I designed a pair of…
A remix of two multimeter holders. Works on IKEA skadis pegboard using the “Ikea Skadis clip” design by ByteSlinger.
I printed multiple holders and mount for this Multimeter and this is the best one, I just wanted it to fit to the IKEA Skadis pegboard
This adds a slightly larger opening to hold the multimeter. The meter can now just drop into place rather than needing to be pressed in. Also, there are a couple of little pillows for the lid, so the meter is held firmly in place without…
modeled from scratch, but highly inspired by https://www.printables.com/model/361590-multimeter-halter-voltcraft-ikea-skadis - so all credits to him. Since this is my first upload, I hope the category is the correct one. I printed the…
Original box is some kind of genious. I cannot work with F3D, so I used TinkerCad to fit this nice box to my Multimeter Voltcraft No91. I added the Voltcraft logo and printed it on my MK3s with MMU2s. You can also print it without MMU,…
Had this older DMM that I was using and no stand available that housed the probes, so, I made one. I want to say that this may work for other DMMs as I have heard some of the low cost DMMs out of Asia these days my actually be the same…
A mount that utilizes the grips on the back of most Fluke multimeters
