Nail Holder Tool
Tested in PETG V2: https://www.printables.com/model/1200946-nail-holder-tool-v2
- Downloads
- 6,194
- Likes
- 2,205
- Rating
- 4.86
1,851 models
Tested in PETG V2: https://www.printables.com/model/1200946-nail-holder-tool-v2
Supplies Needed 8x3 mm Magnets (2 required) & superglue to hold them in. Magnets are optional. Description A small jig to guide your screws and nails straight and to protect your fingers. The tip is printed with 50% infill so a hammer or…
Remix for multi-material printers. Original model by 3Demon: https://www.thingiverse.com/thing:1700233 Print instructions E1 - Body E2 - Shell Second snail as sacrificial object for wiping.
Cable Wall Clip for Nails Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Three sizes included, or scale it yourself for custom fits. Perfect…
One piece Most dangerous snailphone ! Buster call is coming
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
I designed this specifically to hold Holo Taco nail polish bottles. It will hold 8 on each row for a total of 48. It features framing along the base for stability. Printed in PLA. No supports needed.
This is a solid platform for mounting your Walksnail hd Avatar VTX kit to Sonicmodel AR wing 900. Fits perfectly nose for session camera. Just use a couple of drops of UHU Por to glue it to EPP. I strongly suggest to print it from at…
Beverage Can Opener against Broken Nails A keychain tool for opening beverage cans preventing broken nails or nail polish. Key Features Anti-slip curved thumb rest for user comfort with dirty or wet fingers Easy tab lead-in enables a…
Adhesive nails compatible with tesa refill strips in various sizes. I print mine in 0.1mm layer height to get a nicer definition on the plate and hook. The model is parametric for use in openSCAD with clear parameters for changing various…
This hanger will hold the Dewalt DCN692N 1st fix framing nail gun printed in PLA can be done with PETG, Nylon, Carbon fibre ect.. depends on your preference with 50% infill and the perimeters at 4
Mounting the Goggle X Extension Board on top of the goggles as Caddx suggests makes the extension board really look like an afterthought. I've designed this housing to replace the right (screens facing you) Goggle LED panel. This module…
I printed in PLA Toy/Figurine Infill: 15% Layer Height: 0.20mm Supports: Yes, organic Keychain Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
Thimble with a cutout that can be operated with longer nails. Inner diameter 15mm.
Just a quick redraw inspired by the design of the Worx magnet barrier for Landroid Automowers Printed in PETG, laying on the side with bed supports for more strength in direction of force (holding down the magnet band) 20% Infill, 0.3mm…
Aufbewahrungsbox für Nagelfräser "COSLUS" Diese habe ich von Amazon und da war leider keine Box dabei... Das Coslus Fräsergerät ist 150mm lang und hat 20,7mm im Durchmesser Ich habe die in die Grundbox einsteckbaren Aufnahmeringe mit…
Garden nail 12cm - 20min print new improved v2+v3 V4 latest for with bigger top with stroger support and fuzzy body Garden Nail - Easy Print (V4 Update) Jednoduchý a odolný zahradní kolík navržený pro fixaci zahradních postřikovačů,…
You have a choice of the captive or non captive. The captive ones stay as an assembly nicer, wiggle the parts together in the open position Until they snap in place. They will need support everywhere to print. The non captive lets you see…
This is a sticker divider for the generic nail polish racks you can buy off Amazon, AliExpress and etc.
Cable Wire Zip ties 3.6mm Width Mount Hole Nail Screw Dimension 2mm, 2.5mm, 3,mm, 3.5mm, 4mm & 5mm Heavy Duty No problem…… Filament PLA+ or PETG or ABS or ASA Recommender ASA Support: Everywhere Thank you ;-)
Snail collector. Sběrač šneků v akváriu.
¾" panel holder for screwing or nailing panels together.
I have a Bostitch MIIIFN floor nailer that is setup for ¾ inch hardwood. A friend wants to borrow it to install ½ inch flooring. There is a baseplate that needs to be changed to allow the cleats to strike the flooring at the junction of…
You will need a battery, a high voltage generator and conductive wire. And 3D printed components to keep the wires from the wood and each other. Hooks. To keep wires close to each other and free from the wood. Corners. To get the wire…
This tricky birdhouse gadget cache is designed for one of our personal geocache hides, but it can easily be adapted for your own creative setups. It combines a visual red herring with a clever magnetic/nail-based locking mechanism, ideal…
These flexible little snails are almost as fun to hold in your hand as their real-life counterparts. Print them and you too can experience the joy of handling snails as often as you want! Update! - I've fixed the baby snail so the…
Intro Sometimes the simplest tool is the most useful — and this one is no exception. This handy nail-holding tool lets you grip a nail securely while you hammer it in, keeping your fingers safe from accidental hits. It’s quick to print,…
V2: Better grip on the handles
Adorable 3D printed snail table lamp — a cute animal night light for kids room, bedside or cozy home decor. Fits the tBulb B dimmable USB LED module. id : se1008797 size : 115X198X150mm files : 3 pieces : 4 maximum size of the component :…
Sources: The Snail from: https://www.printables.com/model/262274-filament-schnecke-filament-freunde-filament-snail thx __ The Idea from: https://www.printables.com/model/1257063-toilet-paper-roll-holder Also the solution with black pupils…
Assortment of simple nail-in cable clips. Cable diameters: 3-12mm in 1mm steps. Nail diameter: 2mm Category: DIY
The Nail‑Saver Can Tab Opener is a compact and clever accessory designed to lift can tabs effortlessly—without hurting your fingers or risking broken nails. Its angled geometry slides easily under the tab, while the body provides the…
This Friendly Articulated Snail is a remix of thing:4847937 by Nebetbastet which is actually a remix of Isaiah 's Slug. This version just has the protrusion to allow the snail shell to attach. This blender remix allows easy printing with…
Meet Sammy, a charming 3D cartoon snail model that will win your heart. Sammy boasts a soft body that's not slimy at all 😊. His big, expressive eyes add a touch of playfulness, making him a great buddy for kids but sure to delight adults…
Print settings I recommend printing this with PETG, ASA or ABS if it is going to be exposed to the sun. Works well with the layer height of 0.3 mm and 10% infill . No supports needed. Assembly For this snail trap, you only have to…
Intro A simple but extremely useful 3D-printed helper that lets you hold a nail safely while hammering , protecting your fingers from misses and slips. This tool grips the nail securely so you can focus on driving it in without fear of…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your FPV camera with TPU in front of the lens for maximum protection but still with…
Tips for printing: Filament: PLA (only use PLA) Supports: No! Layer height: 0.16mm (optimal) (0.2mm also works) Wall loops: 3 Infill: 15% Seam position: back Wall generator: - Detect thin walls: - Brim: No! ⚠Warning⚠ Please store this…
Perfect for nail techs to display their art to their clients in the salon.
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
This is a Nail Knot Tool for tying Nail Knots use for joining lines together. Commonly used in fly fishing but it can be used for tying on flies, hooks, or lures also. I printed it with .10 layers to assure it came out nice and smooth and…
Character Snail in cartoon Instruction Print body and shell separately in color you want and in horizontal position. Use support when you print shell. Snail has eyes and mouth in black color on one side. To achieve that use color change…
This is the True Nail from Hollow Knight.
Remixed to include 10 nails for a full set.
Various Cable Clips Diameter from 3-12mm up to 5 cables Nail-Diameter: 2mm
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 I designed these hands for my costumes. Catwoman: https://www.printables.com/model/678691 They may also be useful for…
This model is a charming cartoon snail that wins everyone over with its huge, expressive eyes. It is designed for easy printing. Colors: The model looks great in a combination of flesh tones and black/white for the eyes, but feel free to…
I designed this rack to fish 48 holo nail polishes. It might fit other brands too but it wasn't tested. It is designed for bottles 28mm X 28mm. It is very sturdy and was designed to be "cat proof" as there has been an incident involving a…
No supports needed, just 35% infill to have the best sound quality. Materials: Cushion interior 4" speakers 8$ Amp from ali RCA connectors DC connector 12v Charger
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
This is a 4 color remix of Gary the snail it should be obvious where he is from, but anyways the colors I would use for this model is: black, white, pink, and sky blue.
A cable clip that requires no screws or nails. Put the clip on the cable and then slide it in between the wall and floor molding. Perfect for rentals or when you don't want to leave a mark. Changelog 2021-11-24: Added two variants of the…
Just a simple mount for the Walksnail VTX and new Caddx GM3 Gimbal that you can use or modify to fit your needs. It has an additional mount for 40mm cooling fan, because the Moonlight VTX heats up very quickly without an active airflow.…
BOM: Printed with ROSA3D High Speed PLA Gray Save yourself a trip to the hardware store! This is a complete set of classic, nail-in cable clips for routing wires along baseboards, walls, or door frames. Key Features: Nail Compatibility:…
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
a full sized(maybe a little big) model of the pure nail from hollow knight. not cut so will need to be imported into 3d builder to be seperated, i may do this if i have time soon. Category: Scans & Replicas
One piece Best way to call Don Quichotte Doflamingo
Nail polish organizer for my sweetheart 7 parts no supports no glue is needed
This nail holder is designed to hold 1-6mm nails. You can place them in the respective sized hole (each one being an increase of 1mm) and use the print to assure your nails are perpendicular to the nailing surface, while also saving your…
I made this great nail polish and nails accessories organizer for my girlfriend. You can put foam inside the organizer and then cut the foam for each nail polish, so it won’t slide inside. I wanted the drawers to “stick" on each other, so…
Can you open the puzzle box? Try it! You will find a hint of the box itself. I took the Nail Puzzle Box from mtairymd as template and redesigned it completely. For instructions and credits, please check…
Nail Polish Holder using the gridfinity system. Print Settings Printer Brand: Flashforge Printer: Adventurer 3 Rafts: No Supports: No Resolution: 0.25mm Infill: 20% - 3D Infil Filament brand: Sunlu Filament material: PLA Extruder Temp:…
Having lots of snails in my garden eating my veggies. I need to feed them with special snail food ;) after every rain the food was lost and I needed to put new food out there. Searching the Internet, I found some great products to buy or…
Pretty simple to print. 0.2mm layer height and I do three walls. You can mount it to the camera with screws (if you have some small enough) or glue. I prefer using glue and I haven't had any issues with it yet. I've printed it in TPU,…
The nail clipper holder makes clipping nails a less strenuous task for people with limited finger dexterity. It features a large force applicator so users can clip their nails by pushing down on it with their palm or hand. Print Settings…
This trap protects your salads from unwanted guests like slugs and snails. It can be adjusted in order to spare snails and only let slugs trough. Its optional “EmergencyRamp” makes that insects or little frogs who fell in accidentally,…
This is one of my favorite alien models. Created by Derek Kirkendall on myminifactory. https://www.myminifactory.com/users/derekkirkendall1 Very simply printed with PLA, with 0.2mm layer height. The head needs some support structures.…
Flexi/articulated snail -Print in place -No supports -Flexible -Articulated
I decided to make make a flully 3d printable brush design that can be adapted by future designs. In this first batch of brushes I will release a Bouldering/Climbing Brush, a Nail Brush, and a small Test Brush. The brushes print in about 4…
Original image re-encoder .py script: https://github.com/alexqzd/Marlin/blob/Gcode-preview/Display%20firmware/gcode_thumb_to_jpg.py Other guide: https://github.com/mriscoc/Ender3V2S1/wiki/How-to-generate-a-gcode-preview Script that I take…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
🐌 Snail Pen Holder – This slow but steady snail is here to carry all your pens, pencils, and office essentials! A charming addition to your desk or workspace. Use tree supports on build plate only. ✅ Functional & Fun Design ✅ Holds Pens,…
I took 100 photos from my gnome and made a 3d model of it with 3DF Zephyr, after 1hour of rendering, I got this beautiful result. I did some more smoothing with meshmixer to get a nice-looking gnome. I would like to see your makes. Buy me…
Here you have 3 different designs of snail traps for you to print and finally manage to control this pests in your aquarium, according to your needs! Snail Trap A: Bigger model; High holed cilinder where you deposit the snail bait inside.…
Perfect for nail techs to display their art to their clients in the salon.
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Now’s your chance to sell unique, stylish, and modern 3D models that will impress everyone! 😍 By purchasing a…
Garden decoration, modeled in Blender Normal version (snail_01.3mf) MMU2S version not printed yet but should work (snail_02_MMU.3mf) on bottom model is little support (for snaill hands and shell). You can also download and modify blend…
This mount is suitable for 19mm cameras with two screws on one side. I created it especially for walksnail cameras that you want to mount on Geprc mark4 I used Prusament red PLA, but you can use some flexible material instead ;) I also…
25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30
Organize nail polish bottles for storage. Printing: Enclosure fits onto bottom part. Used some superglue to keep them togother. Print Settings Printer Brand: Prusa Printer: Mini+ Rafts: No Supports: No Resolution: 200 Infill: Filament:…
Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…
Please, share your print in the comments. Thank you!
A burner for mosquito coils that is very quick and easy to print. Printing parameters: Material: ANY Layer height: 0.1-0.2 mm Supports: Yes (only for the burner, not necessary for the pin)
Intex tubular swimming pool Intex pin Intex nail Horizontal version, it contain a little pin and will be perfectly oriented in your slicer. Print it horizontaly with 2 or 3 layers, verticaly it will broke. You must use support. Clou…
Stand to organize and display nail polish. The organizer has recesses on the bottom for rubber feet if desired. Minimal fill needed just to bridge top 2 shelves. I used 10%. No supports needed.
ceci est un remix de @Fercsi je l'ai un peu rétrécis et modifié l'arrondis j'ai également créer un socle pour poser les supports d'ongles n’hésitez pas à aimer et poster vos makes this is a remix of @Fercsi I shrunk it a bit and modified…
A handy tray to store up to 24 bottles of nailpolish and a bottle of nailpolish remover. Design is made for nailpolish from the HEMA but also other brand will fit
This is the first reforge of the default weapon from Hollow Knight.
Walksnail VTX 1s Lite camera mounts adapters Notes Caddx should provide this mount in the product package :-( ... extra mount holes for canopy to choose from (and the center one as well) compatible to 14x14mm and 19x19mm camera mounts…
Quick release (keyed-slot) analog module bay for Walksnail Goggles X and DJI V2. Have a look at the awesome original model first. This remix replaces the main body and the “B” mount adapter plate that gets screwed to the back of the main…
Smiling Snail Sculptu 3D model ready to print.