235 models
Da bei meiner Homematic-Wetterstation ein Löffel vom Windmesser abgebrochen ist (gemäss meinen Kindern, hat der Ball diesen beinahe nicht berührt :-) ), habe ich eine neue Nabe und Windlöffel gezeichnet. Die Form und die Idee für die…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
2 color earrings, Escher impossible shapes / Dvoubarevné náušnice, Escherovy nemožné tvary
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Windrose logos, intended to be used to make cloth bags for the board game Nemo's War. Inspired by the “Cloth bundle” that was once available for that game, I made a similar windrose decoration, and the two logos for treasure and ships. To…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Say hello to Nemo! Nemo is a one-pound plastic robot based on the battlebot Malice, but he's about as beginner-friendly as a spinner can get! He only requires three printed parts, and there is plenty of space inside to fit whatever…
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant
A little experiment with mounting my mobile phone (OP8T with bumper case) to a PS5 Dualsense controller using a simple snap-on mount. Borrowed the profile for the snap-on part from https://www.thingiverse.com/thing:4668566 . Included are…
Overview on project This is part of the Weather Station One project, a complete and modular weather station. The design of the system has been driven by a number of requirements: collect all common weather channels including temperature,…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
I created this simple and (almost) fully printed anemometer for students in local high-school programming classes. 3D printed parts (PETG): Top dome Top core (this is where a small magnet is placed) Bottom body (this part contains a Hall…
I added more protection in the grill to prevent fish and snails from getting into the impeller area.
Wind indicator, without additional bearings. Printed from PLA. After printing the bearings gently hold and move them, then add some oil. The blades for the windmill should be printed with supports. Bearings should be printed at a height…
Funnel that mounts on the Uni-T UT363S To measure the airflow of a household ventilation system you can use an anemometer with a funnel that fits around the vent-opening. (up to 185 mm) Then calculate the flow with the surface area of the…
Like many people, I really dislike the Thermarest pump sacks. I think they’re a really lazy design from Thermarest and clearly they can do better because every other company has. The two best pump sacks I’e used are the Exped Schnozzel…
This is a model of the anemometer with wind speed and direction measurements. The whole can be mounted to a 40 mm pole. Electronics inside contains 3 PCBs: AS5048 demo board from Austria Microsystems in a set with round directional magnet…
All the hardware i will be using is necessary for the stock version. Though you can modify the parameters to fit your screws and bearings. I opted to use bearings since it makes the whole assembly pretty much silent. It is also very…
Be kind this is my first post :) A print the scale 1 Category: Outdoor & Garden
The total print time is about 14 hours. Support is needed. Glue is needed to fix the model togeether. Use PLA (I use GD Filament PLA). Printer: Prusa MK4 or Bambulab X1C (for the 3mf file). Nozzle: 0.4 Layers: 0.2 Walls: 2 Infill: 10-15%…
This model consists of the two anemometers, the antenna and the antenna platform for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of…
This project contains ballbeaings, runs very smoothly, no need to purchase extra ballbearings. Quantity to print： Ball * 20, Cup * 4, Direction_indicator * 1, Inner_ballbearing1 * 2, Inner_ballbearing2 * 2, Main_rotor * 1, Pole * 1,…
needed : 2 X M3 20 mm Socket Head Cap Screw Bolts, with nuts 1 X 6700RS bearing [10 x 15 x 4 mm]
This is a 3D model of Squirt from Disney and Pixar’s Finding Nemo! It’s a static figure with no moving parts, making it super easy to print and great for decoration, gifts, or just for fun. There’s nothing complicated about this model,…
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
I printed this with a .2 layer height, though you won't see a lot of variation between different layer heights as it is essentially a logo.
Please use v2. Notes below. Especially playing solo, keeping track of what Mnemos levels you have unlocked can be confusing. Post-It notes are a good solution but they keep falling, and don't look as nice! So I designed these little trays…
Anemometer V1 for Arduino Anemometer V2 is available here: v2 printable Material: 3 x 4x2mm Neodymium magnet A3144 hall effect sensor 10K resistor Arduino Nano It uses 3 magnets that are inserted/glued inside the head in the hole (I had…
Anemometer used for the automatization of the garden sliding shade. Basically, print 3 cups, then print the cover, insert the cups into the openings within the cover and apply the thin CA glue to fix it. Print the tower and insert the…
Anemometer made for an M8 bearing to minimise friction, the bearing fits inside the support.stl file. Note a modified version can now be found at http://www.thingiverse.com/thing:338464 The centre goes through and rests on top of the…
Base and Rooster are designed to fit without glue, just insert the rooster into the base and you are good to go. Glue the magnet to the base and place it on Z Axis motor on your mini :). Enjoy and share your print.
Printed in PETG 3-4 perimeters/15-25% infill. Printed in 2 parts with some CA glue to join them in order to fit on my Bambu printer. I have also provided a non split version if you have a larger printer. Support is needed for flange, I…
Anemometer with wind direction indicator. User Creation Mix: neovista85 - Thingverse I modified the original project to insert bearings and make some mechanical and aesthetic improvements. Known issues: -The fitting of the wind spheres…
PTEG to make it saltwater safe 25% infill
The Best part of V3.. NO SUPPORT NEEDED and is much stronger !!!!! It can handle even slower wind speeds without stalling. I've recorded as low as .5 mph and up to at least 65mph+.. This V3 version is a total re-make not re-mix of…
Anemometer V2 for Arduino Anemometer V1 available here: v1 printable New Features: Lighter - easier to spin, less mass - less momentum. Integrate only one imbedded magnet. Lower center of gravity - more stable. Material: 1 x 10x1.8mm…
Anemometer for wall mounting. Instructions Inspired by the other anemometers on thingiverse. Easy to make - requires 1 x 8mm bearing - the pictured version was printed using the Replicator 2. Print the following: Anemometer Cup x 3 -…
Hardware you need: 5 M5 X 30 mm bolts 1X skate roller bearing (608 size) Anemometer cups: glued to the rotor arms. Better to be printed upside down using supports. Remove the skirt and all pieces can be printed in one shot on the prusa…
Crea il tuo anemometro per caricare i tuoi device con energia del vento
Anemometer Cup and what I call the center dome for the home weather station. The center dome holds the bearing and magnet for triggering the reed switch for measuring wind speed. (Mine is an old Lacrosse Technology from more than ten…
The python code for the project is published here: jattie-ire/anemometer: 3D printed anemometer with a raspberry pi data logger (github.com) I designed this in order to find the best place in my garden to mount my vertical wind turbine,…
Modelled in Blender. Rendered in Nomad Sculpt. NO AI. If you want to sell prints of this model, please don't hesitate to get in touch with us by DM ^^. We printed this model in transparent Resin. If you need any help with the post…
The layers are as follows for 0.15mm layers height: 1+2: orange (could be anything really) 3+4: red 5+6: orange 7+8: white 9+10: black With two layers per color the colors are more solid i think.
Upper part to fit a iPhone 15 pro Max with Apple clear case. One version in tight fit. other version in loose fit.
With this small model of a anemometer you can observe the wind speed or count the revolutions of the cups in a minute. It is also a nice model for experiments or explanations or you can check if it is windy outside, The axis, connector…
Disney's Finding Nemo logo in 3D. 5mm high.
Bonjour :) This also is one Keychain
Genshin Anemo Vision
Here is a simple designs anemometer. It's small anemometer with bowl diameter 3,5 cm, and the diameter of assembled anemometer is about 15 cm. I made three variations of Cup with different roundings. The model is made for bearing 608. You…
El soporte para smartphones más práctico, rápido de imprimir y portable que jamás hayas visto!!! MiNemo es un soporte para teléfono celular o smartphone portable. Básicamente, un accesorio para celular que mantiene al teléfono en una…
Finding Nemo Light .04 Nozzle @ 15% Adaptive Cubic Infill I also changed my Z offset to .08 for better squish to fill any tiny holes works great Use Textured Plate Face Down Printed with a Bambu X1C with AMS and Bambu Filament
I altered the size for it to slip on over existing DMP Cage. Just slip/press on and slip rubber back over it. PETG - Black - .2mm resolution - 2 walls - 15% infill - crosshatch - no supports - orca slicer Qidi Q1 printer
print with supports if using outside dont use PLA ( mine are petg) prusa mk4s ive provided f3d file so you can change connection method or your can make a pole to suit my mounting method 0.4mm nozzle should slide in tightly
Edit 22/08/2026 Found and uploaded the, 'flat', version of the battery cage. Thanks to @Galaxy_5255671 for giving me motivation to look for it! Edit 15/2/2026 Added Back V2.1, with a bigger 7mm rear skate land and a much improved side…
Print files and Fusion 360 project to make a weather station. It will need an ESP8266 pro to log stuff. The pro is required as it has an external antenna. It all clamps to a 25mm aluminium pole. The raingauge is a tipping bucket type - it…
I broke the cups off of my anemometer when I dropped the unit during a battery change. This replacement glues onto the centre hub of the old anemometer. I printed mine in white PLA, and gave it a few coats of a clear UV protectant spray.
This project contains ballbeaings, runs very smoothly, no need to purchase extra ballbearings, no extra parts need to be purchased, and minimum support is required. Quantity to print： ball * 20, blade * 3, blade base * 1, head * 1,…
What is a pirate's favorite letter? You'd think it be R but no it be the C And if you're going to survive out there you'll need to have all your little cardboard pieces organized. This is an organizer insert for Nemo's War Second Edition,…
Hardware you need: 22 M5 X 20 mm bolts 2 Skate roller bearing (608 size) 2 bars 15 mm diameter. Minimum length 300 mm. Support is designed for a 35 mm diameter pole. Anemometer cups: glued to the rotor arms. Better to be printed upside…
This anemometer is calibrated out of the box, robust, easily be printed and needs only little hardware to get it ready. It is intended to be used with a KY-024 hall sensor as pick up. Easily be implemented with Arduino, ESP32 or RasPi…
This can be used with the Uni-T 363S meter, add an M6 screw to attach the funnel to the device. Printing: enable supports, print with the wide side down. Printing parameters are non-critical.
This FDM printed bracket helps mount an SD Card extension cable (not included) to the “AV expansion” bay of your FZ-1 3DO. This is an alternative to cutting a hole in your 3DO’s CD-ROM drive door to expose the ODE’s USB port. The two…
The anemometer (wind-speed detector) on my WS-1200 was destroyed in a hailstorm. The rest of the weather station was completely undamaged, so I didn't want to just trash it. This is my replacement part. I don't have them to compare with,…
Nemo - insert puzzle for small kids (only 4 big parts). Insert into base.
These simple brackets hold your FZ1 3DO’s CD-ROM drive door to the top shell. These are meant to be used when using Mnemo’s ODE. When you install the ODE, you remove the drive and the CD-ROM door is attached to the drive. When there’s no…
Hi! This one may be the first of a generative series based on reef structures (corals, anemones, etc..). I called 'Plastic reef' and it's just a lot of decorative stuff from some OpenScad experiments. I don't know how many generators will…
A small, round planter with a design inspired by sea anemones. Great for adding a succulent or small plant to an office shelf or windowsill. While designed to minimize infill need, I still recommend printing with at least 8% infill for a…
Adapter for TESTO anemometer 410-1 // 410-2 with platform for screws… AD2) model for PET bottle 5L cap ONSHAPE designed
Dive into nostalgia with this adorable 3D printable STL model that captures the beloved clownfish in stunning detail! This charming figurine showcases Nemo's iconic orange and white stripes with his distinctive large eye and playful fin,…
Silly Shell – 4x MEGA Dart (for Anemone, Wildstyle, barrel launcher attachments, etc.) I combined a Silly Shell with air duct dart posts to shoot multiple MEGA Darts simultaneously with good performance. Minimized dead space through air…
An anemometer is a device used to measure the speed and direction of the wind. There are several different types of anemometers, but the most commonly used is the cup anemometer, which consists of three or more small cups mounted on cross…
Modified the original Anemometer cup design by PlasticyBits for the TX20 La Crosse Weather Station. Had to lower the cuts to clear the housing, and angled the ends for a better fit in the dome. . Also had to move the magnet slightly,…
OBJETO PARA CAPTAR O VENTO, SERVE COMO PARTE DE UM DISPOSITIVO PARA MEDIR O VENTO
This is mechanical part of anemometer. Provided OpenSCAD source requires BOSL library. Then you need Arduino and ESP to signal conditioning, counting and sending measure over wifi.
Can hold a Leifheit Nemo. His eyes are still missing. Take 2 screws to make him see! Maybe use a bit more infill for stability.
Have a cookie AND a vision! This is Anemo from Genshin Impact. You can use the full cut cookie and remove the element so you have a cookie with an anemo-shaped hole. Or you use the imprinting cookie and fill the dents with some icing.…
This is part of the weather station which is itself one device into the Rezodo project! Full description can be found here (don't hesitate to follow and like this open source open hardware project please!)…
Update list 16/07/25 - **Updated side button slot:** the travel of the **mouse_5** button has been reduced. - **Ring-finger support extended.** 24/07/25 - **Updated front part**: Improved torsional resistance for *mouse_1* and *mouse_2*…
This model doesn't plan for electronic parts but is meant as a simple yet nice decoration for your bike. It will spin following the wind and your speed, serving as a fun eye-catcher to passer-bys. It requires a 608(zz) bearing and the…
I figured we would try some different colours So..... peg on fins and eyes... as the fins have pegs, you can change their angle on the model... I made an eye without peg so you can choose which way she is looking. with the eyes, you must…
This guard prevents birds from resting on the gauge, thus, keeping it clean. I've printed this with 100% infill in order to give the spires strength, however, they are still rather delicate.
This is a protective hard case for the Testo 405i anemometer (measures air velocity). It is a hot-wire anemometer so it is very delicate, and it did not come with a case, so I designed one for it in two parts - a case and a lid. The lid…
Reorganised for more storespace (my use case). Zigarettes up to XL Package should fit inside or also a kindle with with a “normal” case, but here the smartphone mount may limit. Added a “ball” smartphone mount. See the picture. Other…
The Cherries! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.8 Red 6.0 - 6.4 Black 6.6 - 7
plunger head for use with standard dash123 o rings used for several 1.5OD plunger tube blasters Gets a complete air seal on my blaster when plugging the breach.
It walks down the slope. https://www.instagram.com/tv/CZNt8sHIPeZ/?igshid=MDJmNzVkMjY= You can see the video here. Have fun :) Don't generate supports. And use 'dont need support' file for print. If you have trouble with print, use…
A simple keychain design from Party Animals game. I have included a stl file which you can set the filament swaps in your slicer and a presliced 3mf for Bambu lab printers.
Vytiskněte a poskládejte si stanici, která bude měřit rychlost venkovního větru, nebo vám řekne, jak silně jste schopni foukat. Zapojte 3D tiskárnu a pusťte se do tisku. Co všechno se s ním dá dělat? Zjistíte, jak moc máte silné plíce…
this is case for AZ Delivery ESP32 Wroom. I cannot confirm is this works with other models. Please let me know if you use this with devices bought from other dealers so i can create list of compatible devices. Use m3 bolts
Upgraded plunger head for Leedle Dynamics' amazing Anemone blaster. This hybrid design made of PLA and TPU replaces the plunger head from the original design. No need for elastic cord nor glue nor anything. This new plunger is 2mm longer…
Hello! This is a basic model to hold a Netatmo wind gauge, very easy to print and to install. The gauge bottom won't be in permanent contact with water to preserve the device. Don't hesitate to contact me if needed, Cheeers
Hélices de l'anémomètre du store Dooya DM45RM-50/12, qui avaient cassé chez moi. J'ai découvert Fusion hier soir et c'est mon premier modèle, donc il peut obligatoirement être amélioré, mais il marche parfaitement ! J'en ai profité pour…
Print-tested at: Printer: Bambu Lab A1 Mini (FDM) Filament: eSun PLA+ Layer height: 0.08 mm (fine detail) Nozzle: 0.2 mm Supports: Minimal, auto-generated — works upright with small touchpoints only Z-height: 65 mm Orientation: Print…
Introduction When you change something in your mechanical ventilation system, it’s a good idea to double-check that all vents still deliver enough airflow for a healthy indoor climate. Pro measuring tools are pricey, and the DIY versions…
Simple phonemount that needs no other hardware the magsafe charger clicks in place and sits firmly enough to hold my 13 pro max in it's place. Just place the 2 longer parts inside the cd reader.
Designed a model to better fit the Nemo Tensor valve for a Flextail Tiny Pump X. Should also work for the Tiny Pump 2X. Printed out of PLA. Anything should work fine. Printable with no supports. Included .step file and .stl
Bonemold helmet worn by Redoran guards in The Elder Scrolls 3: Morrowind.
This 3D model of a cup anemometer (a device used to measure wind speed) was created as a case study to demonstrate a robust and reproducible design workflow . The primary purpose of sharing this model is educational: it provides a…
Netatmo Anemometer Bracket Here's a bracket to mount the Netatmo Anemometer on a pole. The bracket is split in two, left and right and there is an STL file here for each one. Two pole sizes are provided 20m and 25mm. The fixings needed…
