2,492 models
Attention Nerf enthusiasts! Are you looking to take your Nerf blaster game to the next level? Boost your accuracy and aim with the 3D Printable Sight/Optic for Nerf Blasters . This sleek and functional accessory is designed to help you…
A small Nerf target to use when doing target practice. Print tip: Do 80 - 100% infill on the base
Nerf shooting target - Hare Just a simple target with a hare. Designed mainly for Nerf or similar toys.
This is used to make your Nerf darts straight and round again. After many battles or being left in the mag too long, the darts can get bent or squashed. By putting them on this form for a few days they can go back in to use. While the…
I printed the red dot sight that @ThompsonStudios made, but I felt like there were somethings that could be improved. My list of things that weren't quite the way I wanted is: The battery slot was not very good, and I wanted a slide in…
Nerf shell for Nerf Trilogy. Shoots three Nerf-darts No support necessary.
Using a clear tube from a FLUM vape device, and 2x 12x40mm compression springs, 4x M3x10 Screws w/Nuts, 1.75mm Filament as a dart rest/block, and 10-32 allthread. This device relies on the flexible/compliant nature of plastic, in order to…
I wanted an inexpensive optic for my Nerf Rival Kronos. The Daisy Electronic Red Dot Point Sight (https://www.amazon.com/gp/product/B000N8KHQG/) fits the bill, but the bracket doesn't fit on the Nerf Rival Kronos' rail. The model is…
V1 uses 20% infill with supports, and V2 uses 15% infill with supports.
this is my version of the files that I re made since Matt yuan himself didnt respond to me.
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
This was a project I did for my neighbour's kid who had the handle (fore-end) of his nerf blaster-like toy. This fixed it and actually made it much better than the original was! I've included everything that I used including the .obj…
The Breacher is a 3d printed Nerf tube-magazine shotgun blaster that fires and ejects Silly Shells! It's spring powered, with a pump action prime. Yes, it actually fires multiple darts at once! READ THE "Print Info" SECTION of this…
Hello fellow nerfers! This is SKLEP mk1, my free time project I've been working on for the past month. This is a single firing string blaster that uses (and ejects) Flypoint/ Kirin shells. It fires half length darts. You can still use it…
Print 'em, set 'em up, shoot 'em down. Probably only suitable for Nerf guns or low-intensity airsoft. The standing version requires quarters as counterweights. I recommend hot glue gunning them in place. Tinker yer own:…
“What are Silly Shells?”: Silly Shells are an ecosystem of 3D printed shotgun shells for homemade Nerf-style blasters! There are many, many different shells to use in each blaster, allowing one blaster to fire a wide variety of ammo types…
The SLAB: Silly's Lever Action Blaster. A Talon-fed half-dart lever-action springer. Firing demo: General blaster overview video Firing demo video The SLAB is a lever action, Talon mag fed, half dart springer. Sellers A full list of US…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these new alternative cosmetic parts for this blaster and its variants here (pictured below)…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
Cynthia is a bolt action Nerf blaster that uses half dart Talon magazines! Firing Demo: Blaster Overview: https://youtu.be/mIW0dAyOCv0 Customization Overview: https://www.youtube.com/watch?v=mZe6dWdQUs0 Assembly Video:…
NOTICE - 3/13/2026 PSA to avoid AKBlasterMod for kits. I've received several reports of plunger tubes from their kits shattering on high spring loads. As they are making kits with no permission or contract there is not much I can do to…
Battle Axe is a 3d printed Nerf shotgun blaster that fires and ejects Silly Shells! Spring powered, pump action prime. Yes, it actually fires multiple darts at once! Changelog is at the bottom of the description text. Most recent update:…
Alchemist is the next step in the evolution of 3d printed pump action springers. Alchemist is built like a tank, has a butter smooth priming and firing feel, and is customizable with many alternative parts and upgrades! MAKE SURE to…
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
Use 100% infill, mine was printed with Prusament PLA and it can tank shots from a Tokyo Marui GBB pistol with no problems (300ish FPS). You can make it thicker (source file included) or stick something on the front to absorb the impact if…
Nerf full length elite dart magazine. With a printed spring. Feature a symmetrical design so you can insert it both ways. Compatible with most blasters (tested on Spectrum, Stryfe, Turbine and Echo). Printing the magazine Print body,…
Talon/half-length nerf magazine designed to be vertically printed in record time. Faster to print, more modular design, more compatibility, more customizability! Print this with 1 wall with a good PLA+ filament and it'll be a strong,…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…
the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed
Custom Blaster Sniper Scope Blaster Removable Stock Blaster Reflex Scope 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
here are the beta files for the N-HK d.U.M.P. It is a full auto nerf blaster that uses angled talon mags. It uses the same basic hardware as my N-AR and others. You will need a m5x50mm to attach the stock and a big soft spring for in…
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
this is a nerf stock that fits in a 220 by 220 by 250 3d printer and works with most nerf guns.
This is a Barrel extension I designed for my NERF Stryfe, it has a clean outside and a decorative barrel rifling on the inside. Should fit other NERFs that support bayonet barrel extensions. Designed in OnShape:…
LYNX DIY Blaster - EU Edition HINWEIS! Bitte druckt diesen Blaster recht Farbenfroh, so dass er sich stark von echten Waffen unterscheidet. Nachdem ich bereits vor ein paar Wochen meine EU Version des CALIBURN 4 Blasters veröffentlicht…
Excalibur is a pump-action blaster with plenty of power, quick spring swapping, and the ability to swap between full length darts or half length darts on the go!…
Mini Nerf Dart shooter. Fully 3D printed, just one part. No Supports, no brims, works right off the build plate. With optional guard. See YouTube: https://www.youtube.com/watch?v=vTA9rtCSa3o 0.2mm, 3 walls, 30%infill. Use PLA or PLA+
3 different nerf gun wall mounts with 4.5mm hole 5 cm 7 cm 10 cm
NOT TO BE SOLD BY FRONTLINE FOAM OR BLASTERGUYS POTATOFEEDERNERF IS ALLOWED TO SELL OFF REMAINING STOCK UPDATE 29.08.25: added a 55mm neck option UPDATE 09.08.25: updated the .3mf with the newest parts UPDATE 31.07.25: Modified the necks…
this is a remix original product here https://www.thingiverse.com/thing:6242990
Automatic Nerf dart turret 2 Axis Gimbal Raspberry/ESP32 controlled Integrated speed measure Max dart speed 140KPH Project GitHub Updates Removed RPI from the BOM 15.08.2023 - New video - Youtube 06.03.2023 - Added wiring diagram, Android…
Holographic Sight-Like Nerf Scope, print in a standing direction
a Nerf dart for the 3D Printer including a Silicone Mold Recomendations: Use TPU
HBM-23 is a belt-fed blaster that offers a high rate of fire for an extended period of time. This is my first design, so keep that in mind if all features are not ironed out completely! I've included different parts for you to customize…
I have changed to fit elite darts and have a more secure lid and hinge. I would recommend printing with 0.2 mm layers.
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I recommend printing the knobs an the crosshair inlays in a different color than the body. You need 4 pcs. of M3x10mm socket head scews.
Hey guys, I needed a blaster for events lasting two or more days — something compact, with at least six shots. One-handed control would definitely be a nice bonus. The Hammershot is a great blaster, but it's bulky and only holds five…
This dart clip is based on th graet design by Emil, which can hold 4 darts. But i have a NERF Commander with 6 additional darts, so i designd a holder that can take those.
Three nerf sights compatible with nerf n-strike rail system. One is red dot inspired the other is ACOG inspired. Both have standard nerf attachment system on the bottom for nerf n-strike rail. ACOG and one red dot have nice 4 holes to…
These Elite compatible darts resist the deformation that occurs with foam providing better accuracy and less jams. These darts are best printed in the most flexible TPU possible to allow the best barrel seal and less pain for those acting…
This is a kit I designed that converts the Nerf Maverick into a Talon magazine compatible flywheel blaster that I have dubbed the “Mayfly”. It was inspired by an illustration done by the visionary Hotkoin, which you can see here: /…
A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.
KNIFE ATTACHABLE TO NERF GUNS THE HOLDER IS REMODELED FROM https://www.printables.com/model/232044-reflex-scope-nerf-elite-2-1 nerf_knife_blade_01_fill_01 - also print as a mirror image
This is a scope I made that works great on Nerf Guns, it is designed to slide onto the tactical rails found on most nerf guns, and looks great and is even better for a nerf war. It also looks and works a lot better if you put a torch into…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
A nerf bipod attachment that I made a few years back, not my best work but it serves its purpose
This is a remix of an awesome Scope by DrDanielJThomas, I have modefied it to fit a nerf gun and hollowed the Scope and added a crosshair. The print version of the model does not require any supports. If you want to seperate the parts…
Stuck in quarantine, figured I would do something. Print instructions I recommend printing front down, with supports.
These prints replace SOME of the normal SLAB v4 parts. The rest of the SLAB v4 parts require NO MODIFICATION. The print orientations on these parts are incorrect as imported. Follow the print orientation of the standard Imperial spec…
Remix (what I changed) I added two slightly different target patterns to each of the targets, as to allow for more precise aiming and a deeper, more refined practice. The pattern has a height of -0.5mm, as to make the pattern easily…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Check updates at the bottom The print files only contain my modified parts, so you'll need to print these plus parts that the original battle axe has, the original…
This is an ergonomic picatinny grip I designed primarily for springer nerf blasters with a heavy draw. Taking inspiration from the FAB PTK grip, the key feature of this grip is the forward index finger, which gives excellent grip and…
Fun little glider plane powered by Nerf. Modeled to fit with a Nerf Jolt but should work with most single-shot front loaders. Tested on Jolt and Sidestrike with success. Simply load the blaster with a dart as normal, then slide the glider…
This is a NERF dart clip fr four extra darts. Designed for and fits Commander Elite 2.0
UPDATE: Redesigned the shells. It takes much less time to print and has less weight. not print in place, seperate them before printing DO NOT SHOOT AT PEOPLE there's a 2mm steel tip version, U can put a diameter 2mm nail in it It can…
This is an electronic red dot sight for nerf and rival guns. it requires a small LED, a CR1632 battery, and a clear piece of plastic. I tried to keep a similar aesthetic to the original sight. I will post an assembly video soon. please…
INFO: Instructions available as a PDF in the attached files. -------------------------------------------------------------------------------------------------------------------------------- Hello hello Nerfers! The Silica-5 is a massive…
Main features: Half length dart blaster K25/K26 spring powered Real steel-esque proportions Sturdy design with heat set inserts, M3x500mm threaded rods Straight forward assembly Spring-loaded prime return (if desired) Easy to print parts,…
These nerf dart with break if they are shot with a high power gun at a hard surface. the one with the tapered bottom is for gluing a small ring of foam on to get a better seal with the barrel of the gun to shoot harder and more accurate.
Sniper sight designed for Nerf mods tactical rails. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support, but…
Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…
The PBR Bow (Pull Back and Release Bow) is a very simple faux-bow blaster with a modular front end for many different loading methods and ammo types. DOWNLOAD THE PDF ASSEMBLY GUIDE IN THE OTHER FILES SECTION OF THIS PAGE! Sellers…
Hey hey fellow Nerfers! I present to you the Pick-Rocket 2 (or the “Tactical Brick”, as I like to call it). This is a reshell of the Xshot Micro 1.0 (the previous version). You can use it as its own blaster or as attachment for your Nerfs…
This is a remix of a design on thingiverse by user justinsprecher (linked below). I remixed his dart cutting jig to cut 38mm long half darts instead of the original 36mm length his jig used. I really liked his design, but 38mm darts are…
Nerf Dart Ammo Box for many many Darts
The handle is suitable for any weapon with this finish. Here installed on a Nerf Commander elite 2.0 , an economical solution to get an over-equipped nerf by paying only a small sum! (only 299 kcz here ) The model prints with a support,…
To shoot at with a nerf gun and not have to walk to it every time you hit it to get it up again. ***Model in optimization, can be updated*** The base has to be printed with support, i will try to make a version that can be printed without…
Nerf’s Pro half-dart blaster line didn’t get off to the best of starts. Despite that, I’m a big fan of the Torrent; with a couple of internal modifications, it becomes a very decent, compact, 150fps, pump-action springer! If, like me, you…
A grip I modeled after the Nerf Raider/Rampage that attaches to picatinny rail. It's not an exact 100% one to one of the grip but it's as close as I can get, and it feels the same in the hand. It's my favorite pump grip Nerf has made, and…
I wasn't completely happy with the mag from FreddyZ , so I took the super nice bottom mechanism and follower from their model and put them on the sure.t mag (horizontal print version by thunkar). The end result is a really nice,…
I took the basic dimensions of a classic Nerf magazine, stared into the magwell of my Stryfe for good 20 minutes, and then sat at my laptop for 6 hours to produce this. Please keep in mind that I have no idea how to operate Fusion 360 and…
This nerf half dart grenade activates when you pop the cap, has a timer depending on the different barrels you use, and shoots darts in multiple directions using an internal spinning rod powered by rubber slingshot cord. The time delay is…
Nerf ultra darts. It is necessary to print from a flexible filament. In order for the arrow to fly properly, it is necessary to create a heavy tip. It is best to use 100% filling in the tip, but for a soft tip it is necessary to create a…
I liked the model “Nerf Half Dart Cutter” by justinsprecher on thingiverse but actually printed the 2 Dart Version b Insurgent79 at the time. I felt like 5 Darts would be the perfect amount for the workflow of cutting darts though with a…
Update 08/06/2025: Added a new version of the Muzzle (Hippo_8_Extended Muzzle). I extended the front of the muzzle so it gives more compression for the string and may give a performance boost. You can attach a longer Picatinny rail…
Dart holder for upper tactical rail on Elite 2.0 Commander. Might fit other models also, I designed and tested it on the mentioned model only. Držák šipek pro horní taktickou lištu na Elite 2.0 Commander.Může pasovat i na jiné modely,…
A “”""scope"""" for your blasters, mainly cosmetic, but it can function as iron sights, the reticles inside the caps can be lined up for rough aiming and it has a set of actual iron sights on the top that look like a small red dot on top!…
Video overview here: Usage demo here (0:23): ---------------------------------------------------------------------------------------- These are shell carriers/holders for Silly Shells ! They all hold Silly Shells horizontally across the…
This is a remix from a Perses hopper found on Thingiverse. Made it 2 pieces instead of 3 and added flair to the sides and chevrons for the top. Blank tops and chevron tops both included Lid is available on thingiverse, I just added my…
MAR 2025 update: tweaked the base auto grip files and solenoid core parts to work with the fileset. Extended parts that needed it. DEC 2024 update: Minor tweaks, added a grip/receiver combo that can be pinned together rather than screwed…
UPDATE 14 Sep 2018: I've added a 9 round speed loader as requested in the comments.The print height of the total loader is 117mm UPDATE 21 Aug 2018: Added designs for 6, 10 and 18 round clips. I've not yet tested those designs, please…
Overview Traveler, beware the crossroad - for HECATE draws near! The Hecate mod converts the Nerf Bigshock into a four-shot inline clip blaster that loads from the rear! This uses half-length short darts, and can achieve a performance of…
a nerf attachment that has a picatinny rail on top for attachments
Ever wanted to practice your nerf skills? Well here it is!
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Nerf Raider stock. I love the look and feel of the Raider stock, and I thought it would be fun to model the stock in case I ever wanted to…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice BOM (on top of the Vulture kit): M3x25mm SHCS qty 7 M3x30mm SHCS qty 2 M3 Nuts qty 9 #4 Screws (3/8" Long) qty 14 5 walls and 99% gyroid for orange parts, 5 walls and…
![Nerf Half Length Dart Cutter [30, 36 & 38mm]](https://media.printables.com/media/prints/457744/images/3763999_e2c77853-c925-4696-8b94-84646396f999/img_20230420_224512.jpg)
