254 models
H0 (scale 1:87) coal bunkers/campsite 100mmx70mm with board. The boards can be inserted variable! H0 (Maßstab 1:87) Kohlebansen/Lagerplatz 100mmx70mm mit Bretter. Die Bretter können variable eingefügt werden! Print instructions Print file…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
For pattress boxes (https://en.wikipedia.org/wiki/Pattress) these are two covers: flat cover flat cover with fitting Distance of the drill holes: 60mm Outer diameter: 74mm Printed with white PETG. 0.2 mm Quality 15% Infill
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Free my models efe8f403abab
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
This part fits a Kohler pull-out faucet handle (Forte Kitchen Sink Faucet K-R10433 with various finishes, one UPC is 0650531224743) that is discontinued and replacement parts (K-1346768) are not readily available, or expensive. This…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Print approx. €4.30–€5.25 excl. taxPreliminary estimate for one variant
äußerer Durchmesser Ø50mm innerer Durchmesser Ø32mm Dicke = 5mm
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €11.98–€14.64 excl. taxPreliminary estimate for one variant
Motivation For the proper installation of the Paulmann LED Set 3x3W (Mirco Line) I needed a housing for the assembly into a hollow wall. I also wanted to place a Shelly switch into the housing, so some additional space was added for…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Schlüssel zum Festziehen/Lösen der Hohlschraube am Siebkorb/Ablaufventil von Spülen. Maße: Schlüsselkopf 15 mm × 2,25 mm. Gewicht ca. 5 g.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
für Handarbeitsfiguren ( Fussballer, Sportler ) eine Stollensohle
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
A diverter handle adapter for the Kohler Freespin Bellerose 2-in-1 multifunction shower combo kit. The original handle has only a small area for grip, making it difficult to turn with wet hands. This adapter slips over the original…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for one variant
Einlegesohle, Schuh Erhöhung, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, Größe 42 Gedruckt in TPU, kann natürlich auf andere Größen skaliert werden. ----------- Insole, shoe elevation, 2,5mm, 5mm, 10mm, 12,5mm, 15mm, 20mm, 25mm, size 42…
This is my interpretation of a typical DDR "Bleichert RK3" crane in G-scale (1:22.5). The HSB in Wernigerode (D), and other museum railways still uses them to load coal on their steam engines. There is hardly any open source information…
Ein Luftfilterkasten für den Creality K1 zum Einspannen eines Aktivkohlefilters ( Aktivkohlefilter passend von der Dunstabzugshaube, Stärke 7mm )
Bohrschablone für Hohlwand Steckdosen / Lichtschalter Bohrdurchmesser 68mm Abstand 71mm Gedruckt mit 20% Infill, leider vor dem verschenken nicht fotografiert… Happy? Buy me a Coffee! → https://ko-fi.com/svenlaaange
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
There are a few options for the model depending on your intended usage. There is one version to assemble with rotating wheels, and one version to print as one object without rotating wheels. For the assembly model you can chose for the…
Hollow blocks / hollow bricks , Hohlblocksteine 1:87, H0 Category: Buildings & Structures
This is a full-scale 3D-printable version of the Löwenmensch figurine — one of the world’s oldest known sculptures, discovered in a German cave and believed to be over 40,000 years old. The original artifact is held by the Ulm Museum in…
H0/HO Coal cargo / Kohle Ladung für Märklin Hochbordwagen size: 87x29mm 97x29mm 144x29mm remixed from https://www.thingiverse.com/thing:3200942 The dimensions are actually slightly bigger, they fit my Waggons qiuet nice with less wiggle…
This is a remix of Krafttrains' "Coal Load HO Scale". It has been raised and resized to fit three different Märklin wagons. Das ist ein Remix von Krafttrains "Coal Load HO Scale". Es wurde erhöht und die Größe an drei verschiedene Märklin…
BOM 2x printed part "Luftfilter.stl" 1x printed part "Luftfilter_Case.stl" 4x Panhead screws 4.5mm or 5mm diameter, length depends on the fan width 1x Fan 120mmx120mmx38mm or 120mmx120mmx25mm, 12V or 24V, high pressure model highly…
This is a trip-lever handle bushing and nut for many Kohler toilet models. It is reverse threaded (lefty tighty, righty loosey) as is the original part. The stock nut should fit this replacement bushing, so only print the nut if you need…
I was replacing my flush valve, Kohler 1216610, found this big nut that was just over 4" across the flats. I don't have an adjustable big enough, so quick design and print to save the day. Print this strong, use at least 20% infill, more…
Hi, hiermit stelle ich euch meine 3-Fach Bohrschablone für Hohlwanddosen / Unterputzdosen mit 71 mm oder 72 mm Bohrlochabstand zur Verfügung. Die Schablone kann über die Öffnungen an vorhandene Zeichnungen angelegt werden. Natürlich lässt…
This is a miniature wooden plank bench for doll's houses and the like (...without text in the backrest, as in some of the photos). The bench and backrest are simply slotted together after printing. Print the bench in STL orientation with…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I was to lazy to go to the hardware store, thus I adapted my existing 120mm version and adding one arm. Fits very well. I had to increase the thickness to 3 mm (you can adapt by drop beyond bet → “sinking”) to reduce transparency to the…
Remixed the Outlet Covers to fit on European Hohlraumdosen. I've resized them and raranged the holes for the Screws to fit on: 74mm Hohlraumdosen Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
Diese Abdeckung passt von hinten über eine doppelte 68mm Hohlraumdose.
This model captures the iconic likeness of cricket legend Virat Kohli, blending realistic features with a smooth, stylized finish. Generated using advanced AI-sculpting tools and refined for 3D printing, this bust is designed to be a…
I had a Moen faucet wrench that worked really well that came with those faucets. I used that design as a starting point to create a wrench specific to Kohler nut sizes. Print details - Printed with an outside brim because of how tall it…
Few simple drawers for empty Clas Ohlson spools. Might also fit other spools, dimensions are as follows: - Inner diameter 100mm - Outter diameter 200mm - Spool inner “height” ~62mm You'll need 2pcs of M3 bolts (choose lenght as you…
There are a variety of designs for shower doors, but usually they slide on guides mounted to the top and bottom rails. After mine broke, I looked for suitable models but didn't find any. The original part is made out of Delrin, which…
PETG 4 perimetry 0,3 mm vrstva Poté smirkování pod vodou - ve spodní části je otvor, kam se našroubuje M5 šroub a za ten se tvořítko uchytí do aku vrtačky. Smirkoval jsem třemi hrubostmi od 240 do nějakých 600 a nakonec jsem ještě…
Repair Kit for the use of cavity wall boxes in plasterboard if the hole was too large or the edges were broken out
EN: It's Christmas and you're trying to save as much time as possible when baking cookies? Then try this multiple roll cutter. ;) This model is for bigger printers, but you can resize it for smaller. CZ: Jsou vánoce a vy se snažíte při…
Wenn Ihr auf der Suche nach einer Bohrschablohne für 68mm Holwanddosen seid, seid Ihr hier genau richtig!
A pep file I found sometime back on a free to download pepakura website, so not even sure if it is Madalorian, but I suspect it is? Thanks to Keith Brown for the information that the original model was done by Jackrit Cheers Jace
I needed a brush holder cap for my old belt sander (the carbon brush was defect). As there was nothing to buy online (except some chinese seller, which would take a month to deliver) I tried to create one. This is the result. May it help…
Needed a tape holder for my clas ohlson pegboard so I adapted this great design: https://www.thingiverse.com/thing:3152263 Uses 8mm dowels but I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
This hinge is not a perfect style replacement for the Kohler Soft Close Hinge. (It is close, but I was having trouble creating the proper curves in Solidworks.) Think of it more as a functional replacement. This is only the soft close,…
Print settings: Nozzle: .4 or .2 (The teeth that grip the valve stem require a finer nozzle), Layer Height: .16, Material: PETG/ASA/Nylon (something that does well exposed to moisture), No supports should be needed. This stem/handle…
Ein Rahmen für den Gehäuselüfter um einen Kombifilter “HEPA/Aktivkohle” zu verwenden. Das Unterteil kommt in die Rückwand des K1C und in das Oberteil der Filter. Es wird dann durch 8 Neodym Magnete ( 6mm x 2mm) gehalten. Filter:…
Stojánek na pohlednici, foto nebo pozvánku
Add the hinge pins into the part before placing the part into the rest of the bin, then use a pointy object to slide the pin in. When the pin is fully pushed in, there is a hole for a small screw ~5mm in length to be screwed in to prevent…
Whipped this up as the part where the fill tube connects to the innermost shaft of the toilet valve cracked. I printed it in PETG on a Prusa Mini+, too, about an hour. 100% infill with .2 layer height. I printed it on its side so I used…
These two clips (one for the 5L box, article number 44-3000-5, and one for both 10L and 20L, articles 44-3000-10, 44-3000-20) make sure the boxes stay closed.
This is a key for a Kohler generator enclosure, tested with model 14RCA . The original part is manufactured by Industrilas: Keys for insert 2-370 part number 291108 . I took measurements from the physical key and CAD file supplied by…
Bring the excitement of cricket into your home with our captivating 2D wall art featuring Virat Kohli. As the reigning monarch of Indian cricket, King Kohli's legacy is beautifully depicted in this artwork, making it a must-have for any…
Hinge for Kohler toilet seat lid. Printed with PETG (ran out of white and switched to gray).
Model jsem vytvořil pro manželku jako ulehčení práce při pečení. Ve sliceru objekt slučte aby Vám neházel chybu vrstev které se překrývají aby drželi po kupě.
Bohrschablone für 68mm Hohlwanddosen mit Libellenaufnahme Diese Bohrschablone ist für alle gedacht, die mehrere Hohlwanddosen sauber, gerade und ohne langes Ausmessen setzen wollen. Die Schablone ist für Standard Hohlwanddosen mit 68mm…
Printed in Sunlu Matte PLA for the most part, only the red is some leftover other brand of PLA. Its quite hefty: 13h print time @0.2 layer height with a 0.4mm nozzle, 3 walls, 4 layers top and bottom, 12% cross hatch infill. 420g filament…
Zuhause ist dort, wo sich dein Herz wohlfühlt - Schild
Printed with black PETG 0.4mm nozzle and 3 walls are sufficient for 30Nm customize for your needs::…
Wanted to make a dry box where everything could be sourced from Clas Ohlson. I included all of the files i designed myself in fusion360, but i did not really want to design a nipple for letting filament through, so i just grabbed one off…
Needed a pegboard holder for my tape measure so I designed one. I uplodaded .step and .f3d files for easy editing too! https://ko-fi.com/aasikki
Link to the 3D model http://a360.co/2pal1MS Made for roles that has a rim of 3.8 mm. Category: 3D Printer Accessories
Replacement for a toilet seat spacer. Pegs are 5.6mm in diameter and are 6.2mm in height. They are 37.4mm apart (center-to-center). Base is 50.2mmx19.0mm with a height 7.6mm.
Put the wooden pieces in the slots, glue it, then get it out carefully.
äußerer Durchmesser Ø35mm innerer Durchmesser Ø20mm Dicke = 10mm
Overview A simple sponge and dishwand holder for a Kohler Brookfield 5942 Sink. Designed in OnShape printed using Prusa Mini+ with Inland White PLA. Currently using a 0.4mm nozzle so this print runs a longer that I would like. I would…
K1 Max Aktivkohlefilter mit großem Aktivkohlefilter von Bos*h (R2537) und jetzt NEU BOSCH (1 987 435 557) RAV4 Um den Geruch beim Drucken von ABS loszuwerden Habe ich diesen Filter konstruiert, der nahezu 100% der Gerüche beim ABS drucken…
Couldn't find a reasonably priced source for the oddly sized threading on the back of a Kohler faucet I was using for an outdoor shower build, so I created my own. This nut is 15mm thick and has an internal thread of 1 ¼" - 20 UN (ANSI…
Sehr einfacher 80mm Keks Ausstecher zum selber anpassen, die Schrift/Bild/Logo sollte max. 8mm hoch sein. Am besten funktioniert ein Mürbeteig OHNE Backtriebmittel da die Kekse sonst im Ofen aufgehen und das Logo verwischt. Wenn genug…
This gauge allows you to mark positions at the correct distance for additional hollow-wall box. This works both horizontally and vertically. Place the gauge in the hole and align it with the spirit level. Then mark the middle of the next…
My Original Shower Kohler Devonshire insert broke, so I made a more “sturdy” one. Printing: Support: 5% density (grid) Infill: 50%-100% Layer Height: 0.2mm It should take about 15-20 minutes, using 4g of filament.
This is a simple bracket that connects the donut seat on a Kohler toilet and the lid to the bowl. Category: Bathroom
EN: This is a STEP model of a BMW motorcycle key blank. I designed the key blank as accurately as possible based on a laser scan and various measurements. The central longitudinal grooves on both sides are the same for all keys, and the…
No support needed. Make it food safe PETG if you place food in it (nuts, crisp or whatever.)
Das ist mein Einbau- und Anschluss-Kit für einen Can 125 Abluftfilter. Der entlüftet eine growBox, die genau in einen alten IKEA-Schrank passt. Die Abluft wird nach aussen geführt. Der Filter wird mit einem Plastikflansch geliefert, den…
Simple and effective holder for your screwdrivers. Saves material but does use more screws than other designs might, but this also allows for the best customizability, as everyone will have a slightly differing set of drivers ;) Designed…
Behälter , um eine zusätzliche Menge an Aktivkohle in den Luftstrom des Reingers einbringen zu können. Zum Zusammenbau nur mit einerm luftdurchlässigen Rieselschutz auslegen und Aktivkohle einfüllen. Der Deckel ist flexibel und lässt sich…
Carburetor Adapter Plate with Vacuum For Kohler SV600-3224 by RebelTaz I swapped engines on a Cub Cadet in my shop without thinking it through first. The original blown engine utilized a vacuum operated fuel pump because the tank was in…
This tool helps you to role the perfect joint every time. Made for “Jibbi Premium Activkohlefilter konisch 5,5 - 7 mm”. No supports needed, maybe you need a brim. Print in PLA or other Filament.
A kohlrabi tag to label your vegetable patch. Part of a tag collection. Two versions (the gigant one is actually the same as the little one, just made wider, feel free to accommodate it to your aestetic needs). Three-colored (two switches…
Es ist ein Lüfterhalter mit Einschub für ein Kohlefasermatte als Filter.
Der Filter ist für kleine Pflanzenzelte gemacht und hat nicht soviel Aktivkohle wie herkömmliche. Die Maße sind von Handelsüblichen Filtern abgeschaut. Ich habe PLA benutzt, wenn du ein stärkeres Material benutzt kann man ihn bestimmt…
Many frames do not have to needed fixing points to attach the shifting wires of a Rohloff hub in a nice way. These clamps solve this problem. Currently available diameters: 20mm, 29mm Additionally needed: M3 nut M3x12 inbus screw
Rohloff Lock-Ring Tool (for 8540L/8540SL) Gates Carbon Drive Sprocket Survives the 30 Nm tightening torque with a torque wrench and 27 mm socket wrench M3 x 30 mm Hexagon socket countersunk head screws ISO 10642 / DIN 7991 M3 hexagon nuts…
Kohler K series Engine Points Cover, these are getting harder to find for these older motors, and when you do find them, people are asking $25 for an old rusted out part.
The Kohler BD-N450US uses an install plate from part assembly K-1321002, but the plastic rectangular inserts can break. I made a custom insert for our toilet that takes up the whole space. I've included the STEP and F360 file so that the…
This model is a direct replacement for a plastic stem driver that tends to break in some Kohler-brand shower handles. Recommend printing in PETG or ASA for strength. Original part tends to break at the edges of recessed square drive, this…
*Update 8/8/26 - What a pain in the nuts. Im about to return it but i shall not be defeated by this bathroom fixture. I went out and bought PETG and then made more adjustments. Currently, v5 is holding up the shower head and seems to work…
Ich habe für eine Hohlraumdose einen zu großen Fräser verwendet, daher musste der 3d-Drucker her.
Replacement base for a LED lamp bought at Clas Ohlson. It's probably just a rebrand, so similar lamps exist. The base hole is 12.5mm. Print instructions I printed with 4 perimeters, 20% cubic infill and it seems to work so far.
Level up your bait game with our Roll Boilie Press! Designed specifically for anglers who trust their own recipes, this 3D printed tool allows you to create dozens of perfectly compressed bread/roll boilies in minutes. PETG Material.…
The showerhead at the clubhouse pool wouldn't aim anymore. I took it apart and found a hard plastic ring that was cleanly snapped. I modeled this in Fusion 360 to replace it and it's been working since. Print is a little stringy because I…
Shower Knob for KOHLER Freespin 2-in-1 Shower Head. This knob presses on to the directional control valve making it much easier to turn. Print in PETG.
